4.6 Article

Controlling the Plastic Anisotropy of Magnesium Alloy by Tailoring the Grain Size and Yttrium Content

Related references

Note: Only part of the references are listed.
Article Chemistry, Physical

Investigation of crossed-twin structure formation in magnesium and magnesium alloys

Jiaxiang Wang et al.

Summary: This work investigates the effect of alloying addition on the transformation of twin-twin interactions into crossed-twin structures in magnesium alloys. The study reveals the influence of plastic anisotropy and alloying elements on the formation of crossed twin structures. It proposes that the proper choice of alloying elements can hinder the formation of crossed twin structures and improve the ductility of magnesium alloys.

JOURNAL OF ALLOYS AND COMPOUNDS (2023)

Article Metallurgy & Metallurgical Engineering

Local hardening and asymmetric twin growth by twin-twin interactions in a Mg alloy

Krishna Yaddanapudi et al.

Summary: This study investigates the effects of twin-twin interactions on the distribution of defects and stress fields in a magnesium alloy. The analysis focuses on a specific twin junction in a deformed Mg-3wt.%Y alloy. The results show that the morphology of the twins is asymmetric and the dislocations concentrate near the twin-twin junction site. Crystal plasticity calculations suggest that the local stress fields generated at the junction site are responsible for the observed concentration of dislocations. These findings provide insights into the twinning behavior and mechanical properties of Mg alloys.

JOURNAL OF MAGNESIUM AND ALLOYS (2023)

Article Materials Science, Multidisciplinary

Investigation of twin growth mechanisms in precipitate hardened AZ91

Brandon Leu et al.

Summary: A two-step growth mechanism for {101over line 2} tensile twins blocked by basal-precipitates in precipitate-hardened AZ91 magnesium alloy is proposed based on an elasto-viscoplastic fast-Fourier-transform (EVP-FFT) model. The stress fields resulting from the interaction of two sequentially propagated twins with a precipitate promote twin growth at the twin-precipitate junction. This mechanism explains the existence of thick twin domains in these material systems despite the hindrance of twin growth in precipitate-hardened Mg alloys.

ACTA MATERIALIA (2023)

Article Materials Science, Multidisciplinary

Twinning pathways enabled by precipitates in AZ91

Brandon Leu et al.

Summary: The study reveals that the interactions between precipitates and deformation twins in magnesium alloys can influence the propagation and formation of twins, with various pathways suggested depending on the location of interaction site and thickness of the precipitate.

MATERIALIA (2022)

Article Materials Science, Characterization & Testing

Statistical characterization of twin transmission across grain boundaries in magnesium

Mariyappan Arul Kumar et al.

MATERIALS CHARACTERIZATION (2022)

Article Nanoscience & Nanotechnology

Study on the strengthening mechanism of rare earth yttrium on magnesium alloys

Yanfei Chen et al.

Summary: This study analyzed the thermodynamic stability and heat resistance of Al-containing Mg alloys using experimental and theoretical methods. The results showed that the addition of manganese and yttrium improved the mechanical properties of the Mg alloys.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

Article Materials Science, Multidisciplinary

Geometric compatibility measure m? for twin transmission: A predictor or descriptor?

Mariyappan Arul Kumar et al.

Summary: This study critically analyzes the geometric compatibility factor m' for twin transmission across grain boundaries (GBs), and finds that m' cannot accurately describe and predict twin transmission events. The applicability of m' is influenced by the elastic anisotropy, plastic anisotropy, and strain levels. Local stresses play a dominant role in twin transmission compared to geometric alignment.

MATERIALS TODAY COMMUNICATIONS (2022)

Review Metallurgy & Metallurgical Engineering

Multi-solute solid solution behavior and its effect on the properties of magnesium alloys

Jun Wang et al.

Summary: Low-density magnesium alloys have wide applications in aerospace, transportation, and other weight-saving-required fields. The solid solution of alloying elements in the alpha-Mg phase has various effects on the mechanical properties and corrosion properties of Mg alloys, such as solid solution strengthening and corrosion resistance enhancement. The theory of solid solution strengthening and ductilizing proposed by Pan and co-workers has received extensive attention. By selecting proper multi-alloying elements, the comprehensive properties of Mg alloys can be synergistically improved through solid solution in the alpha-Mg phase.

JOURNAL OF MAGNESIUM AND ALLOYS (2022)

Article Materials Science, Multidisciplinary

Quantitative evaluation of the short-range order strengthening effect on solid solution and GB strength Mg-Y alloys by ab initio calculations

Hui Su et al.

Summary: Short-range order (SRO) plays a positive role in improving the mechanical properties of Mg alloys by decreasing stacking fault energy and segregating in twin boundaries. The newly formulated strengthening model based on critical resolved shear stress (CRSS) accurately predicts the tensile strength of binary Mg-Y alloy.

JOURNAL OF MATERIALS SCIENCE (2022)

Article Crystallography

Effect of Process Temperature on the Texture Evolution and Mechanical Properties of Rolled and Extruded AZ31 Flat Products

Maria Nienaber et al.

Summary: The application of magnesium flat products is affected by the limited formability at room temperature and the anisotropy of the mechanical properties, which is mainly caused by the underlying hexagonal crystal structure of magnesium and the development of strong crystallographic textures during massive forming processes. This study focuses on the influence of the manufacturing process on the microstructure and texture evolution of flat products made of conventional magnesium alloy AZ31, and discusses the effects on mechanical properties and formability.

CRYSTALS (2022)

Article Materials Science, Multidisciplinary

Accommodation and formation of {(1)over-bar012} twins in Mg-Y alloys

Krishna Yaddanapudi et al.

Summary: This study investigated {(1) over bar 012} tensile twins terminating inside the grains of a deformed Mg-Y alloy using transmission electron microscopy. Crystallographic features of the terminating twins and associated slip structures were quantified and analyzed, with local stresses computed using crystal plasticity simulations. Basal < a > and < c + a > matrix glide were found to accommodate the plastic stresses near the terminating twins, with defect contrast consistent with lattice dislocations and twinning partials observed along the twin boundary. A dislocation reaction was proposed to establish the interrelationship between matrix glide and {(1) over bar 012} twinning in Mg-Y alloys.

ACTA MATERIALIA (2021)

Article Materials Science, Multidisciplinary

Revisiting the evolution behaviors of beta ' phase in Mg-Nd and Mg-Y alloys

Qingchun Zhu et al.

Summary: This study investigated the evolution behaviors of beta' phases in Mg-RE based alloys, revealing that beta(s)' and beta(l)' phases can transform into different phases during ageing at 225 degrees C. Density functional theory calculations were used to rationalize the evolution behaviors, providing guidance for controlling the structure and distribution of precipitates in Mg-RE based alloys.

MATERIALS LETTERS (2021)

Article Metallurgy & Metallurgical Engineering

Activation of dislocations in Mg with solute Y

Alireza Maldar et al.

Journal of Magnesium and Alloys (2021)

Article Materials Science, Multidisciplinary

Unveiling precipitation behavior in Mg-Y based alloys

Qingchun Zhu et al.

Summary: Mg-Y based alloys demonstrate a promising combination of strength and deformability by tuning precipitation and solute strengthening mechanisms. Understanding the precipitation sequence and its dependence on Yttrium concentration will guide the fine-tuning of structure and distribution of precipitates in Mg-Y based alloys.

MATERIALS & DESIGN (2021)

Article Materials Science, Multidisciplinary

Influence of yttrium-induced twinning on the recrystallization behavior of magnesium alloys

Nooruddin Ansari et al.

Summary: Increasing Y content changes the dominant twinning mode and affects the recrystallization behavior of Mg-Y alloys. Precipitates in Mg-10Y alloy pin grain boundaries and twin boundaries, suppressing recrystallization. Grain boundary bulging is identified as the main mechanism of recrystallization in Mg-10Y alloy.

JOURNAL OF MATERIALS SCIENCE (2021)

Article Nanoscience & Nanotechnology

Manipulating deformation mechanisms with Y alloying of Mg

Jiaxiang Wang et al.

Summary: The study investigates the effect of Y concentration on slip and twinning mechanisms in binary Mg-Y alloys. Increasing Y concentration reduces the intensities of the initial and deformation textures, as well as plastic anisotropy, tension-compression asymmetry, and twinning. The model suggests that increased Y concentration increases the critical resolved shear stress for basal slip and reduces plastic anisotropy, leading to enhanced non-basal activity in Mg-Y alloys.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Article Nanoscience & Nanotechnology

Influence of plastic properties on the grain size effect on twinning in Ti and Mg

M. Arul Kumar et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

Article Materials Science, Multidisciplinary

Study of basal < a > and pyramidal < c plus a > slips in Mg-Y alloys using micro-pillar compression

Jing Wu et al.

PHILOSOPHICAL MAGAZINE (2020)

Article Materials Science, Multidisciplinary

Microstructure, Deformation, and Property of Wrought Magnesium Alloys

J. F. Nie et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2020)

Article Nanoscience & Nanotechnology

Hall-Petch relationship, twinning responses and their dependences on grain size in the rolled Mg-Zn and Mg-Y alloys

B. Q. Shi et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

Article Metallurgy & Metallurgical Engineering

Effect of Y and Gd content on the microstructure and mechanical properties of Mg-Y-RE alloys

Kang Luo et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2019)

Review Metallurgy & Metallurgical Engineering

A review: Past, present and future of grain refining of magnesium castings

Erdem Karakulak

JOURNAL OF MAGNESIUM AND ALLOYS (2019)

Article Materials Science, Multidisciplinary

Effect of asymmetric cold rolling on the microstructure, texture, and mechanical properties of the AZ91 alloy

Ebrahim Tolouie et al.

MATERIALS RESEARCH EXPRESS (2019)

Article Materials Science, Multidisciplinary

Origins and dissociation of pyramidal <c + a> dislocations in magnesium and its alloys

Zhigang Ding et al.

ACTA MATERIALIA (2018)

Article Nanoscience & Nanotechnology

Effect of alloying elements on room temperature stretch formability in Mg alloys

Hidetoshi Somekawa et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

Article Multidisciplinary Sciences

Mechanistic origin and prediction of enhanced ductility in magnesium alloys

Zhaoxuan Wu et al.

SCIENCE (2018)

Article Multidisciplinary Sciences

Deformation twinning and grain partitioning in a hexagonal close-packed magnesium alloy

M. Arul Kumar et al.

NATURE COMMUNICATIONS (2018)

Article Nanoscience & Nanotechnology

Role of alloying elements on twin growth and twin transmission in magnesium alloys

M. Arul Kumar et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

Article Multidisciplinary Sciences

Super-formable pure magnesium at room temperature

Zhuoran Zeng et al.

NATURE COMMUNICATIONS (2017)

Article Physics, Applied

Grain size constraints on twin expansion in hexagonal close packed crystals

M. Arul Kumar et al.

JOURNAL OF APPLIED PHYSICS (2016)

Article Materials Science, Multidisciplinary

Solute strengthening at high temperatures

G. P. M. Leyson et al.

MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2016)

Article Multidisciplinary Sciences

Grain neighbour effects on twin transmission in hexagonal close-packed materials

M. Arul Kumar et al.

NATURE COMMUNICATIONS (2016)

Article Materials Science, Multidisciplinary

Why are {10(1)over-bar2} twins profuse in magnesium?

Haitham El Kadiri et al.

ACTA MATERIALIA (2015)

Article Materials Science, Multidisciplinary

The effect of high yttrium solute concentration on the twinning behaviour of magnesium alloys

N. Stanford et al.

ACTA MATERIALIA (2015)

Article Nanoscience & Nanotechnology

Texture weakening and ductility variation of Mg-2Zn alloy with CA or RE addition

Hanlin Ding et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)

Article Nanoscience & Nanotechnology

Role of yttrium in activation of ⟨c plus a⟩ slip in magnesium: An atomistic approach

Ki-Hyun Kim et al.

SCRIPTA MATERIALIA (2015)

Article Metallurgy & Metallurgical Engineering

Study on the early surface films formed on Mg-Y molten alloy in different atmospheres

A. R. Mirak et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2015)

Article Materials Science, Multidisciplinary

In situ observation of collective grain-scale mechanics in Mg and Mg-rare earth alloys

F. Wang et al.

ACTA MATERIALIA (2014)

Article Materials Science, Multidisciplinary

Critical Assessment 6: Magnesium sheet alloys: viable alternatives to steels?

N. J. Kim

MATERIALS SCIENCE AND TECHNOLOGY (2014)

Article Materials Science, Multidisciplinary

The Effect of Nd on the Tension and Compression Deformation Behavior of Extruded Mg-1Mn (wt pct) at Temperatures Between 298 K and 523 K (25 A°C and 250 A°C)

Ajith Chakkedath et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)

Article Nanoscience & Nanotechnology

Current issues in magnesium sheet alloys: Where do we go from here?

Byeong-Chan Suh et al.

SCRIPTA MATERIALIA (2014)

Article Nanoscience & Nanotechnology

Reducing the tension-compression yield asymmetry in a hot-rolled Mg-3Al-1Zn alloy via multidirectional pre-compression

Shun Xu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)

Article Nanoscience & Nanotechnology

Basal and non-basal dislocation slip in Mg-Y

Stefanie Sandloebes et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)

Article Materials Science, Multidisciplinary

Grain Refinement of Magnesium Alloys: A Review of Recent Research, Theoretical Developments, and Their Application

D. H. Stjohn et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2013)

Article Materials Science, Multidisciplinary

Friedel vs. Labusch: the strong/weak pinning transition in solute strengthened metals

G. P. M. Leyson et al.

PHILOSOPHICAL MAGAZINE (2013)

Article Multidisciplinary Sciences

Reducing deformation anisotropy to achieve ultrahigh strength and ductility in Mg at the nanoscale

Qian Yu et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2013)

Article Materials Science, Multidisciplinary

The relation between ductility and stacking fault energies in Mg and Mg-Y alloys

S. Sandloebes et al.

ACTA MATERIALIA (2012)

Article Materials Science, Multidisciplinary

Effect of microstructure on the nucleation of deformation twins in polycrystalline high-purity magnesium: A multi-scale modeling study

I. J. Beyerlein et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2011)

Article Nanoscience & Nanotechnology

Effect of yttrium addition on lattice parameter, Young's modulus and vacancy of magnesium

Qiuming Peng et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)

Article Nanoscience & Nanotechnology

Sheet texture modification in magnesium-based alloys by selective rare earth alloying

T. Al-Samman et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)

Article Nanoscience & Nanotechnology

Solute segregation and texture modification in an extruded magnesium alloy containing gadolinium

N. Stanford et al.

SCRIPTA MATERIALIA (2011)

Article Nanoscience & Nanotechnology

The effects of texture and extension twinning on the low-cycle fatigue behavior of a rolled magnesium alloy, AZ31B

L. Wu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)

Article Materials Science, Multidisciplinary

Statistical analyses of deformation twinning in magnesium

I. J. Beyerlein et al.

PHILOSOPHICAL MAGAZINE (2010)

Editorial Material Multidisciplinary Sciences

Weight Loss with Magnesium Alloys

Tresa M. Pollock

SCIENCE (2010)

Article Nanoscience & Nanotechnology

Effective values of critical resolved shear stress for slip in polycrystalline magnesium and other hcp metals

W. B. Hutchinson et al.

SCRIPTA MATERIALIA (2010)

Article Materials Science, Multidisciplinary

Effect of alloying elements on the elastic properties of Mg from first-principles calculations

S. Ganeshan et al.

ACTA MATERIALIA (2009)

Article Engineering, Mechanical

Modeling the effect of twinning and detwinning during strain-path changes of magnesium alloy AZ31

Gwenaelle Proust et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2009)

Article Chemistry, Physical

Effects of rare-earth elements Gd and Y on the solid solution strengthening of Mg alloys

L. Gao et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2009)

Article Materials Science, Multidisciplinary

Effect of annealing treatments on the anisotropy of a magnesium alloy sheet processed by severe rolling

J. A. del Valle et al.

MATERIALS LETTERS (2009)

Article Nanoscience & Nanotechnology

Texture and stretch formability of a rolled Mg-Zn alloy containing dilute content of Y

Yasumasa Chino et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)

Review Engineering, Mechanical

A dislocation-based constitutive law for pure Zr including temperature effects

I. J. Beyerlein et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2008)

Article Nanoscience & Nanotechnology

The role of twinning-detwinning on fatigue fracture morphology of Mg-3%Al-1%Zn alloy

S. M. Yin et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)

Article Nanoscience & Nanotechnology

The origin of rare earth texture development in extruded Mg-based alloys and its effect on tensile ductility

N. Stanford et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)

Article Metallurgy & Metallurgical Engineering

Review on Research and Development of Magnesium Alloys

Z YANG et al.

Acta Metallurgica Sinica-English Letters (2008)

Article Automation & Control Systems

Magnesium and its alloys applications in automotive industry

Mustafa Kemal Kulekci

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2008)

Article Materials Science, Multidisciplinary

Modeling texture, twinning and hardening evolution during deformation of hexagonal materials

G. Proust et al.

ACTA MATERIALIA (2007)

Article Materials Science, Multidisciplinary

The role of twinning and untwinning in yielding behavior in hot-extruded Mg-Al-Zn alloy

Y. N. Wang et al.

ACTA MATERIALIA (2007)

Article Materials Science, Multidisciplinary

Self-consistent modelling of the mechanical behaviour of viscoplastic polycrystals incorporating intragranular field fluctuations

R. A. Lebensohn et al.

PHILOSOPHICAL MAGAZINE (2007)

Article Nanoscience & Nanotechnology

Ductility enhancement of a heat-treatable magnesium alloy

P. Mehrotra et al.

SCRIPTA MATERIALIA (2006)

Article Materials Science, Multidisciplinary

Role of twinning in the hardening response of zirconium during temperature reloads

GC Kaschner et al.

ACTA MATERIALIA (2006)

Article Nanoscience & Nanotechnology

Grain refinement of magnesium alloys by zirconium: Formation of equiaxed grains

M Qian et al.

SCRIPTA MATERIALIA (2006)

Article Materials Science, Multidisciplinary

The effect of twinning on the work-hardening behavior and microstructural evolution of hafnium

CA Yablinsky et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2006)

Article Nanoscience & Nanotechnology

Native grain refinement of magnesium alloys

P Cao et al.

SCRIPTA MATERIALIA (2005)

Article Materials Science, Multidisciplinary

Grain refinement of magnesium alloys

DH StJohn et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2005)

Article Engineering, Mechanical

Plastic anisotropy and the role of non-basal slip in magnesium alloy AZ31B

SR Agnew et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2005)

Article Nanoscience & Nanotechnology

Effects of yttrium on microstructure and mechanical properties of hot-extruded Mg-Zn-Y-Zr alloys

Y Zhang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)

Article Engineering, Industrial

Grain refining of magnesium alloy AZ31 by rolling

TC Chang et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)

Article Materials Science, Multidisciplinary

Effect of yttrium on structure and mechanical properties of Mg alloys

M Socjusz-Podosek et al.

MATERIALS CHEMISTRY AND PHYSICS (2003)

Article Physics, Multidisciplinary

From dislocation junctions to forest hardening

R Madec et al.

PHYSICAL REVIEW LETTERS (2002)

Article Materials Science, Multidisciplinary

The role of solute in grain refinement of magnesium

YC Lee et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2000)