4.6 Article

Additive Manufacturing of Glass-Ceramic Parts from Recycled Glass Using a Novel Selective Powder Deposition Process

Journal

APPLIED SCIENCES-BASEL
Volume 12, Issue 24, Pages -

Publisher

MDPI
DOI: 10.3390/app122413022

Keywords

iro3d; sintering; build orientation; sand; shrinkage

Funding

  1. FCT-Fundacao para a Ciencia e Tecnologia, through IDMEC, under LAETA [UIDB/50022/2020]
  2. FCT project
  3. AM-Optical [PTDC/EME-EME/4593/2021]

Ask authors/readers for more resources

This research proposes the adaptation of the iro3d selective powder deposition process to produce glass-ceramic parts using recycled glass powders. Various deposition strategies were used to produce specimens and evaluate their geometric distortions and mechanical performance. The addition of sand was found to mitigate distortions. The results demonstrate the potential of the iro3d SPD process for additively manufacturing glass parts.
Additive manufacturing technologies have been in continuous growth due to their advantages over traditional manufacturing. The iro3d is a powder deposition machine designed to build metal parts. This research work proposed the adaptation of the iro3d selective powder deposition process to allow the production of glass-ceramic parts using recycled glass powders. Various specimens were produced using different deposition strategies such as build orientation and sintering holding times. Specimens were evaluated in terms of geometric distortions (shrinking and warping) and in terms of mechanical performance (flexural behavior and hardness). Two geometrically complex test parts were also produced to infer the minimum feature size capabilities of the process. The results denoted parts that displayed significant geometrical deviations, which could be correlated with some of the tested parameters. Through the addition of sand to the tested specimens, we demonstrated that distortions could be mitigated with proper control of the powder's coalescence. In the end, the specimens' fracture surfaces were examined, and the presence of porosities was correlated with their mechanical properties. The results demonstrated that the iro3d SPD process could be used to produce additively manufactured glass parts.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.6
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available