☆ 4.6 Review

An Insight into the Chemistry of Cement-A Review

APPLIED SCIENCES-BASEL (2023)

Related references

Note: Only part of the references are listed.

Article Construction & Building Technology

Hydration mechanism and phase assemblage of blended cement with iron-rich sewage sludge ash

Yan Xia et al.

Summary: The hydration of Portland cement blended with iron-rich sewage sludge ash (IRSSA) was investigated. The addition of IRSSA retards the early age hydration of cement clinker, especially C3S. However, the reaction degree of cement clinker increases at later ages. Iron can be incorporated and absorbed in C-S-H, leading to an increase in the Fe/Ca atomic ratios. The formation of C-S-H induced by IRSSA can be observed through BSE images.

JOURNAL OF BUILDING ENGINEERING (2023)

Add to Collection

Article Construction & Building Technology

Effect of pozzolanic reaction of zeolite on its internal curing performance in cement-based materials

Xuan Zheng et al.

Summary: In this study, the effect of the pozzolanic reaction of zeolite on its internal curing performance in cement-based materials was experimentally investigated. The results showed that the pozzolanic reaction increased the pore volume and water absorption of zeolite particles. The internal curing with zeolite shortened the humidity saturation period of cement paste and improved the relative humidity.

JOURNAL OF BUILDING ENGINEERING (2023)

Add to Collection

Article Construction & Building Technology

Hydration of blended cement with high-volume slag and nano-silica

Zhenhai Xu et al.

Summary: This study investigates the hydration of blended cement with high-volume slag and nano-silica. The results show that nano-silica can enhance the hydration of slag and cement before 3 days, but inhibits the hydration after 3 days. Additionally, nano-silica improves the pore structure and compressive strength of hardened paste.

JOURNAL OF BUILDING ENGINEERING (2023)

Add to Collection

Article Construction & Building Technology

Alkali -silica reaction and its dynamic relationship with cement pore solution in highly reactive systems

Chandni Balachandran et al.

Summary: Despite extensive research, the relationship between alkali-silica reaction (ASR) progression and cement hydration mechanism, particularly pore solution composition influence on reaction products, is not well understood. This study used a multi-analytical approach to investigate ASR mechanism in a mortar system with fused silica aggregates under accelerated conditions. Large field SEM mapping was used to correlate physical expansion with composition, distribution, and amount of ASR reaction products over time. A three-stage behavioral model was proposed to explain the dynamic relationship between ASR progression and pore solution composition. The results showed the presence of two phases in ASR products: a C-S-H-type gel and an ASR-type gel, with their relative abundance determined by their accessibility to the pore solution, influencing ASR propagation in the microstructure.

CONSTRUCTION AND BUILDING MATERIALS (2023)

Add to Collection

Article Construction & Building Technology

Synthesis and integration of cement-based capsules modified with sodium silicate for developing self-healing cements

S. Papaioannou et al.

Summary: Encapsulated healing agents, made of reactive OPC core and durable shell produced by pan-coating technique, improve the mechanical performance and self-healing efficiency of cement mortar mixtures. Adding sodium silicate enhances survivability of capsules up to 75% during mixing, and incorporating 20% capsules reduces water sorptivity coefficient by 80% after a 28-day healing period.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Construction & Building Technology

Performance and mechanisms of stimulated self-healing in cement-based composites exposed to saline environments

Caihong Xue

Summary: This study investigates the performance and mechanisms of stimulated autogenous self-healing in cement-based composites with the addition of crystalline admixtures (CAs) exposed to different saline solutions. The results show that the stimulated self-healing capacity strongly depends on the exposure environment, and the correlation between crack closure and durability recovery suggests the need for a performance-recovery-based assessment method. Furthermore, the type of CAs significantly affects the mechanisms of stimulated self-healing.

CEMENT & CONCRETE COMPOSITES (2022)

Add to Collection

Article Construction & Building Technology

Utilization of bio-waste eggshell powder as a potential filler material for cement: Analyses of zeta potential, hydration and sustainability

Y. K. Chen et al.

Summary: This study demonstrated the feasibility of utilizing bio-waste eggshell powder as a potential filler material for cement. Through various experimental methods, it was found that the eggshell powder can enhance cement hydration, improve cement performance, and reduce environmental pollution.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Thermodynamics

Effects of limestone powder on the early hydration of tricalcium aluminate

Jian Ma et al.

Summary: This paper thoroughly investigates the effects of limestone powder on the hydration of Portland cement and the formation and transformation mechanism of calcium carboaluminate phases. The results show that the addition of limestone powder delays the formation of hemicarboaluminate and reduces chemical shrinkage.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2022)

Add to Collection

Article Construction & Building Technology

Hydration kinetics of sulfoaluminate cement with different water/cement ratios as grouting material used for coal mines

Zhaoxia Yan et al.

Summary: This paper investigates the hydration process and kinetics of sulfoaluminate cement, and finds that the water/cement ratio (W/C) affects the hydration exothermic characteristics, microstructure, and strength of the cement.

MAGAZINE OF CONCRETE RESEARCH (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Oxidation of Carbon Nanotubes for Improving the Mechanical and Electrical Properties of Oil-Well Cement-Based Composites

Luca Lavagna et al.

Summary: Carbon nanotubes can be effectively dispersed in cement by treating them with sulfonitric acid, resulting in significant improvement in the mechanical properties and electrical conductivity of cement-based composites.

ACS APPLIED NANO MATERIALS (2022)

Add to Collection

Article Materials Science, Ceramics

Investigation of sodium alginate as a candidate retarder of magnesium phosphate cement: Hydration properties and its retarding mechanism

Runqing Liu et al.

Summary: This study investigated the impact of sodium alginate on the hydration properties of magnesium potassium phosphate cement suspension with a high water-to-cement ratio, and explored the mechanism behind its retarding effect. Sodium alginate was found to delay the dissolution and precipitation of key crystalline phases, leading to an extended setting time for the cement.

CERAMICS INTERNATIONAL (2022)

Add to Collection

Article Construction & Building Technology

Immobilization of Cu (II), Ni (II) and Zn (II) in silica fume blended Portland cement: Role of silica fume

Minghao Liu et al.

Summary: This research elucidates the mechanism of silica fume (SF) in the immobilization of heavy metal cations in SF-PC blended systems. SF accelerates the hydration kinetics of PC, leading to increased strength and immobilization capacity of the systems.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Molecular dynamics simulation of C-S-H corrosion in chloride environment

Yunfeng Zhang et al.

Summary: The corrosion characteristics of C-S-H gel in a Cl- environment were studied using reactive force field molecular dynamics simulation. The addition of water increased the interaction between calcium atoms in C-S-H and oxygen atoms in water. Gel pores and water promoted the movement of water molecules in C-S-H, while the mobility of the calcium silicate skeleton was influenced by gel pores. The strength of C-S-H gel was largest in the y direction, followed by the x direction, and smallest in the z direction.

MATERIALS TODAY COMMUNICATIONS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Hydration mechanism and thermodynamic simulation of ecological ternary cements containing phosphogypsum

Jiaojiao Hou et al.

Summary: Through the study of the thermodynamic characteristics of the cement system, it was found that the thermodynamic interaction between mineral single-phase and hydration products plays an important role in the spatio-temporal distribution of ions in the cementitious system during hydration reactions. As the Ca/Si ratio increases, the values of CaO, SiO2, and H2O gradually increase, while CaOext and H2OOH show a positive proportional relationship, and SiO2H and SiO2 show an inverse proportional relationship. GEMSelektor is accurate in the simulation calculation of the total amount of AFt and AFm mineral phases which quantitatively analyze the correlation between C-S-H gels formation and C3S with complex decomposition ion groups.

MATERIALS TODAY COMMUNICATIONS (2022)

Add to Collection

Article Construction & Building Technology

The effects of nano-silica on early-age hydration reactions of nano Portland cement

Peng Dong et al.

Summary: The hydration reactions of nano Portland cement (NPC) with and without nano-silica (NS) additives were studied using LC-TEM. It was found that NS significantly reduced the dissolution and induction periods in normal PC systems, but its contribution to hydration reactions in NPC systems was less due to the size effect. LC-TEM observations showed that NS could adsorb on the surfaces of ettringite crystals, promoting their conversion into monosulfate and reducing their content in NPC.

CEMENT & CONCRETE COMPOSITES (2022)

Add to Collection

Article Construction & Building Technology

Characterization of sustainable mortar containing high-quality recycled manufactured sand crushed from recycled coarse aggregate

Zhiming Ma et al.

Summary: This study proposes an innovative method to crush recycled coarse aggregate into recycled manufactured sand, which can be used to prepare high-quality recycled mortar with high strength and good durability. The recycled manufactured sand has superior properties compared to recycled fine aggregate, and can significantly improve the performance of recycled mortar.

CEMENT & CONCRETE COMPOSITES (2022)

Add to Collection

Article Construction & Building Technology

Effect of fineness of cement on drying shrinkage

Ippei Maruyama et al.

Summary: The effect of cement fineness on drying shrinkage was investigated in this study. It was found that the relationship between drying shrinkage and the degree of hydration differs under different cement fineness values. A new mechanism, apart from faster hydration, was identified as influencing the increase in drying shrinkage. The study also showed that drying shrinkage can be predicted by the water vapor sorption surface area and the Blaine value of cement.

CEMENT AND CONCRETE RESEARCH (2022)

Add to Collection

Article Construction & Building Technology

Mechanical properties and hydration mechanism of high-volume ultra-fine iron ore tailings cementitious materials

Hua-Wei Li et al.

Summary: Iron ore tailings (IOT) are a type of mining waste that can cause environmental and safety issues. This study investigates the effect of high-volume ultra-fine IOT on the mechanical properties and hydration mechanism of cementitious materials. The results show that the ultra-fine treatment enhances the hydration activity of IOT particles and improves the mechanical properties of cementitious materials.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Review Construction & Building Technology

Hydration and mixture design of calcined clay blended cements: review by the RILEM TC 282-CCL

Franco Zunino et al.

Summary: This white paper focuses on the hydration mechanisms of calcined clay-blended Portland cements, detailing the pozzolanic reaction of calcined clay and discussing the factors controlling and limiting the reaction. The paper also provides guidelines for optimizing the mixture design of calcined clay blended cements.

MATERIALS AND STRUCTURES (2022)

Add to Collection

Article Multidisciplinary Sciences

Synergistic effect of hydration and carbonation of ladle furnace aslag on cementitious substances

Yuanrong Yi et al.

Summary: This study investigates the effects of Ladle furnace slag (LFS) hydration and carbonation reactions on cementitious substances under different temperatures and LFS particle sizes. The results show that the hydration and carbonation reactions promote and influence each other, with optimal effects observed at specific temperature and particle size ranges.

SCIENTIFIC REPORTS (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Pre-curing time effect on reactive powder concrete impact resistance

Xiaohui Wang et al.

Summary: This study investigates the impact of pre-curing time on the impact resistance of reactive powder concrete (RPC) and analyzes the influencing mechanism from a microstructural perspective. The results show that appropriate pre-curing time can enhance the impact resistance and improve the mechanical properties of RPC specimens.

AIP ADVANCES (2022)

Add to Collection

Article Polymer Science

Compressive and Flexural Strengths of Mortars Containing ABS and WEEE Based Plastic Aggregates

Youssef El Bitouri et al.

Summary: This paper investigates the mechanical strength of mortars with plastic aggregates as a partial replacement for sand in cementitious materials. It is found that the compressive and flexural strength decrease with an increase in the replacement rate, but remain satisfactory for structural purposes. Additionally, the density of the mortar is reduced with the incorporation of plastic aggregates, and the decrease in mechanical strength is mainly attributed to the weak bond between cement paste and plastic aggregates, leading to increased porosity. Furthermore, mortars with plastic aggregates may exhibit ductile rupture behavior.

POLYMERS (2022)

Add to Collection

Article Construction & Building Technology

Influences of leaching on the composition, structure and morphology of calcium silicate hydrate (C-S-H) with different Ca/ Si ratios

Yuefeng Ma et al.

Summary: Leaching of hydration products in cement-based materials can lead to a reduced service life of concrete structures. Understanding the leaching mechanism is crucial for preventing damage to concrete structures. This study investigated the leaching mechanism of C-S-H with different Ca/Si ratios by immersing them in NH4Cl solution. The results revealed that decalcification occurred in both interlayer and intralayer of C-S-H, leading to a reduced Ca/Si ratio and the formation of silica gels.

JOURNAL OF BUILDING ENGINEERING (2022)

Add to Collection

Article Construction & Building Technology

A potential C-S-H nucleation mechanism: atomistic simulations of the portlandite to C-S-H transformation

Xabier M. Aretxabaleta et al.

Summary: This paper proposes and explores a mechanism for the crystallization step during C-S-H gel non-classical nucleation through atomistic simulation methods. The study suggests that the condensation reaction between silicate dimmers and portlandite precursor monolayers is a potential path for C-S-H formation. By comparing the free energy of the process with thermodynamic data, the proposed mechanism is found to be a key process for C-S-H gel formation.

CEMENT AND CONCRETE RESEARCH (2022)

Add to Collection

Article Construction & Building Technology

Comparison on early hydration of Portland cement and sulphoaluminate cement in the presence of nano ettringite

Xiufeng Deng et al.

Summary: This study investigated the mechanism of using nano-ettringite to catalyze the early precipitation of ettringite, and the results showed that nano-ettringite significantly accelerated the hydration reaction rate, but had different effects on pastes of different types of cement.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Construction & Building Technology

Effect of electrical field on the stability of hydration products of cement paste in different liquid media

Zheng Fang et al.

Summary: This study investigates the effects of electrical fields and aggressive liquid media on the stability of cement-based materials and hydration products using various techniques. The results show that the C-S-H structure remains stable under certain conditions but experiences severe degradation under low-pH liquid media when coupled with electrical fields.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Construction & Building Technology

The Early Age Hydration Products and Mechanical Properties of Cement Paste Containing GBFS under Steam Curing Condition

Baoliang Li et al.

Summary: The hydration products and strength of cement pastes incorporated with ground blast furnace slag (GBFS) were studied under different curing conditions. GBFS was found to participate in cement hydration during the initial steam curing process, resulting in the formation of various gel structures. Prolonging the steam curing time to 7 days favored the formation of low aluminum C-(A)-S-H gels. Additionally, the addition of 20% GBFS had a negligible influence on the strength of cement mortar under short-term steam curing, but increased the strength gap between 20% GBFS blended mortar and pure cement mortar after 7 days of steam curing.

BUILDINGS (2022)

Add to Collection

Article Chemistry, Inorganic & Nuclear

A Comprehensive Study on the Applications of Clays into Advanced Technologies, with a Particular Attention on Biomedicine and Environmental Remediation

Roberto Nistico

Summary: In recent years, there has been a growing interest in integrating naturally occurring clays into advanced technological applications. This is due to the unique properties of clays, such as ion exchange capability, layered structure, surface area and reactivity, and biocompatibility. This review provides a useful analysis of the main goals achieved by clays in different fields and their structure-property correlations. It also explores the nonconventional applications of clays in various areas, including biomedicine, environmental remediation, membrane technology, additive manufacturing, and sol-gel processes.

INORGANICS (2022)

Add to Collection

Article Materials Science, Ceramics

Mechanical properties of mortar containing recycled Acanthocardia tuberculata seashells as aggregate partial replacement

Daniel Suarez-Riera et al.

Summary: This study explores the possibility of using Acanthocardia tuberculata seashells as partial substitutes in mortars. The results indicate that the decrease in mechanical properties is mainly caused by the water absorption properties of seashell aggregates, but it does not compromise the material's performance in civil applications.

BOLETIN DE LA SOCIEDAD ESPANOLA DE CERAMICA Y VIDRIO (2021)

Add to Collection

Article Construction & Building Technology

Hydration, shrinkage, pore structure and fractal dimension of silica fume modified low heat Portland cement-based materials

Lei Wang et al.

Summary: The addition of silica fume accelerates hydration of low heat Portland cement and consumes Ca(OH)(2), leading to excellent performance in concrete with 8% silica fume. Fractal dimension (D-s) can be used as a new parameter to evaluate the shrinkage behavior of concrete.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Proposing a three-phase model for predicting the mechanical properties of mortar and concrete

Siventhirarajah Krishnya et al.

Summary: The study evaluated the influence of ITZ on the mechanical properties of cementitious materials using a multi-scale model. By analyzing and homogenizing the ITZ and aggregates in the matrix, the effective properties of mortar and concrete were predicted. The predicted values showed reasonable agreement with experimental results, with discussions on the influences of ITZ on the properties of mortar and concrete.

MATERIALS TODAY COMMUNICATIONS (2021)

Add to Collection

Article Physics, Applied

Improving rubber concrete strength and toughness by plasma-induced end-of-life tire rubber surface modification

Roberto Nistico et al.

Summary: The study found that plasma treatment of rubber can improve the compatibility between rubber and cement matrix, resulting in increased strength and toughness of concrete. Mechanical tests showed that plasma-treated rubber introduced into Portland concrete composites led to higher flexural strength, toughness, and compression strength compared to untreated rubber.

PLASMA PROCESSES AND POLYMERS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Applications of Cement-Based Smart Composites to Civil Structural Health Monitoring: A Review

Paolino Cassese et al.

Summary: This paper provides an overview of research on cement-based smart composites (CSCs) doped with conductive filler as self-sensing materials for civil Structural Health Monitoring (SHM) applications. The literature review addresses specific issues related to fabrication and operation of CSC samples as sensing elements. State-of-the-art applications of CSCs to SHM of structural prototypes are extensively reviewed, offering insights into the main trends and open issues in this research field.

APPLIED SCIENCES-BASEL (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Influence and Mechanism Research of Hydration Heat Inhibitor on Low-Heat Portland Cement

Fujie Jia et al.

Summary: The study demonstrated that the microcapsule sustained-release-type hydration heat inhibitor (MSR) effectively regulates the hydration process of low-heat Portland cement, reducing heat release rate and peak temperature, delaying the hydration reaction, and maintaining high 28-day strength.

FRONTIERS IN MATERIALS (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Recycling of WEEE Plastics Waste in Mortar: The Effects on Mechanical Properties

Alessandra Merlo et al.

Summary: This study explored the use of recycled WEEE plastic waste as a partial substitute for aggregate in light mortars, finding that even at a low replacement rate of 15% of mineral aggregate with plastic waste, the mechanical performance deteriorated by approximately 50%. The poor mechanical properties of the plastic and inadequate adhesion between matrix and plastics were identified as the main reasons for this phenomenon, leading to the formation of extra porosity. Nonetheless, using plastic waste as a partial replacement for natural aggregate helps preserve natural resources and does not limit the materials' application in non-structural uses.

RECYCLING (2021)

Add to Collection

Article Materials Science, Ceramics

Chitosan and its char as fillers in cement-base composites: A case study

Roberto Nistico et al.

BOLETIN DE LA SOCIEDAD ESPANOLA DE CERAMICA Y VIDRIO (2020)

Add to Collection

Review Construction & Building Technology

A comprehensive review on the mechanical properties of waste tire rubber concrete

Rajeev Roychand et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Review Chemistry, Physical

An Analytical Mini-Review on the Compression Strength of Rubberized Concrete as a Function of the Amount of Recycled Tires Crumb Rubber

Luca Lavagna et al.

MATERIALS (2020)

Add to Collection

Review Materials Science, Characterization & Testing

Polyethylene terephthalate (PET) in the packaging industry

Roberto Nistico

POLYMER TESTING (2020)

Add to Collection

Article Multidisciplinary Sciences

Cementitious composite materials for thermal energy storage applications: a preliminary characterization and theoretical analysis

Luca Lavagna et al.

SCIENTIFIC REPORTS (2020)

Add to Collection

Article Construction & Building Technology

New insights into how MgCl2 deteriorates Portland cement concrete

Ning Xie et al.

CEMENT AND CONCRETE RESEARCH (2019)

Add to Collection

Article Green & Sustainable Science & Technology

Construction and demolition waste as a raw material for wood polymer composites - Assessment of environmental impacts

Miia Liikanen et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Add to Collection

Article Construction & Building Technology

Advances in understanding ye'elimite-rich cements

Mohsen Ben Haha et al.

CEMENT AND CONCRETE RESEARCH (2019)

Add to Collection

Review Construction & Building Technology

Properties and utilizations of waste tire rubber in concrete: A review

Ayesha Siddika et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Article Construction & Building Technology

Rendering mortars with incorporation of very fine aggregates from construction and demolition waste

Sara Jesus et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Article Green & Sustainable Science & Technology

A diagnosis of construction and demolition waste generation and recovery practice in the European Union

Paola Villoria Saez et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Add to Collection

Article Green & Sustainable Science & Technology

Life cycle assessment of non-hazardous Construction and Demolition Waste (CDW) management in Lombardy Region (Italy)

Giulia Borghi et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Hydration, mechanical property and C-S-H structure of early-strength low-heat cement-based materials

L. Wang et al.

MATERIALS LETTERS (2018)

Add to Collection

Article Engineering, Environmental

Construction and demolition waste best management practice in Europe

Jose-Luis Galvez-Martos et al.

RESOURCES CONSERVATION AND RECYCLING (2018)

Add to Collection

Article Multidisciplinary Sciences

Multiscale understanding of tricalcium silicate hydration reactions

Ana Cuesta et al.

SCIENTIFIC REPORTS (2018)

Add to Collection

Review Engineering, Mechanical

The importance of surfaces and interfaces in clays for water remediation processes

Roberto Nistico

SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES (2018)

Add to Collection

Article Engineering, Multidisciplinary

Study of the impact of bentonite on the physico-mechanical and flow properties of cement grout

Noureddine Mesboua et al.

COGENT ENGINEERING (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Elucidating the Effect of Water-To-Cement Ratio on the Hydration Mechanisms of Cement

Aida Margarita Ley-Hernandez et al.

ACS OMEGA (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Stable conversion of metastable hydrates in calcium aluminate cement by early carbonation curing

S. M. Park et al.

JOURNAL OF CO2 UTILIZATION (2017)

Add to Collection

Article Construction & Building Technology

Kinetic mechanisms and activation energies for hydration of standard and highly reactive forms of β-dicalcium silicate (C2S)

Jeffrey J. Thomas et al.

CEMENT AND CONCRETE RESEARCH (2017)

Add to Collection

Article Construction & Building Technology

Effects of inorganic surface treatment on water permeability of cement-based materials

Lufeng Jia et al.

CEMENT & CONCRETE COMPOSITES (2016)

Add to Collection

Article Construction & Building Technology

Recycling of construction and demolition waste for producing new construction material (Brazil case-study)

M. Contreras et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

Add to Collection

Article Green & Sustainable Science & Technology

Use of recycled construction and demolition waste (CDW) aggregates: A sustainable alternative for the pavement construction industry

A. Ossa et al.

JOURNAL OF CLEANER PRODUCTION (2016)

Add to Collection

Article Construction & Building Technology

Research review of cement clinker chemistry

Horst-Michael Ludwig et al.

CEMENT AND CONCRETE RESEARCH (2015)

Add to Collection

Article Construction & Building Technology

Advances in understanding hydration of Portland cement

Karen L. Scrivener et al.

CEMENT AND CONCRETE RESEARCH (2015)

Add to Collection

Article Construction & Building Technology

Mechanical performance and medium-term degradation of rubberised concrete

Sara Sgobba et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Add to Collection

Article Microscopy

Investigation of C3S hydration by environmental scanning electron microscope

Y. Sakalli et al.

JOURNAL OF MICROSCOPY (2015)

Add to Collection

Article Construction & Building Technology

Ion-specific effects influencing the dissolution of tricalcium silicate

L. Nicoleau et al.

CEMENT AND CONCRETE RESEARCH (2014)

Add to Collection

Article Construction & Building Technology

Development of cement-based strain sensor for health monitoring of ultra high strength concrete

Ming-qing Sun et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

Add to Collection

Article Engineering, Mechanical

Cement and concrete as an engineering material: An historic appraisal and case study analysis

Colin R. Gagg

ENGINEERING FAILURE ANALYSIS (2014)

Add to Collection

Review Materials Science, Multidisciplinary

Impact of water-soluble cellulose ethers on polymer-modified mortars

D. D. Nguyen et al.

JOURNAL OF MATERIALS SCIENCE (2014)

Add to Collection

Article Materials Science, Ceramics

Effect of Magnesium and Zinc Ions on the Hydration Kinetics of C3S

Amelie Bazzoni et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2014)

Add to Collection

Article Engineering, Environmental

Environmental and economic impact assessment of construction and demolition waste disposal using system dynamics

Mohamed Marzouk et al.

RESOURCES CONSERVATION AND RECYCLING (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Investigations on Cementitious Composites Based on Rubber Particle Waste Additions

Glaucio Laun Nacif et al.

MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS (2013)

Add to Collection

Review Green & Sustainable Science & Technology

Waste materials co-processing in cement industry: Ecological efficiency of waste reuse

Wendell de Queiroz Lamas et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2013)

Add to Collection

Article Construction & Building Technology

Nucleation and growth models for hydration of cement

George W. Scherer et al.

CEMENT AND CONCRETE RESEARCH (2012)

Add to Collection

Review Construction & Building Technology

Use of plastic waste as aggregate in cement mortar and concrete preparation: A review

Nabajyoti Saikia et al.

CONSTRUCTION AND BUILDING MATERIALS (2012)

Add to Collection

Article Engineering, Environmental

Economic analysis of conventional versus selective demolition-A case study

Andre Coelho et al.

RESOURCES CONSERVATION AND RECYCLING (2011)

Add to Collection

Article Construction & Building Technology

Material and structural performance evaluation of recycled PET fiber reinforced concrete

Sung Bae Kim et al.

CEMENT & CONCRETE COMPOSITES (2010)

Add to Collection

Article Construction & Building Technology

Valorization of coarse rigid polyurethane foam waste in lightweight aggregate concrete

Amor Ben Fraj et al.

CONSTRUCTION AND BUILDING MATERIALS (2010)

Add to Collection

Article Engineering, Environmental

Physical and mechanical properties of mortars containing PET and PC waste aggregates

Kinda Hannawi et al.

WASTE MANAGEMENT (2010)

Add to Collection

Article Engineering, Environmental

An investigation on the use of shredded waste PET bottles as aggregate in lightweight concrete

Semiha Akcaozoglu et al.

WASTE MANAGEMENT (2010)

Add to Collection

Article Construction & Building Technology

A novel material for lightweight concrete production

Abdulkadir Kan et al.

CEMENT & CONCRETE COMPOSITES (2009)

Add to Collection

Article Construction & Building Technology

Thermal insulation enhancement in concretes by adding waste PET and rubber pieces

Bulent Yesilata et al.

CONSTRUCTION AND BUILDING MATERIALS (2009)

Add to Collection

Article Construction & Building Technology

Characteristics of mortar and concrete containing fine aggregate manufactured from recycled waste polyethylene terephthalate bottles

Yun Wang Choi et al.

CONSTRUCTION AND BUILDING MATERIALS (2009)

Add to Collection

Article Engineering, Industrial

A new technique of processing for waste-expanded polystyrene foams as aggregates

Abdulkadir Kan et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)

Add to Collection

Article Engineering, Environmental

Influence of content and particle size of waste pet bottles on concrete behavior at different w/c ratios

C. Albano et al.

WASTE MANAGEMENT (2009)

Add to Collection

Article Engineering, Environmental

Properties of lightweight aggregate concrete prepared with PVC granules derived from scraped PVC pipes

S. C. Kou et al.

WASTE MANAGEMENT (2009)

Add to Collection

Article Construction & Building Technology

Proportioning and characterization of lightweight concrete mixtures made with rigid polyurethane foam wastes

P. Mounanga et al.

CEMENT & CONCRETE COMPOSITES (2008)

Add to Collection

Article Engineering, Environmental

Use of waste plastic in concrete mixture as aggregate replacement

Zainab Z. Ismail et al.

WASTE MANAGEMENT (2008)

Add to Collection

Article Physics, Atomic, Molecular & Chemical

Factors affecting early-age hydration of ordinary Portland cement studied by NMR: Fineness, water-to-cement ratio and curing temperature

M. Alesiani et al.

APPLIED MAGNETIC RESONANCE (2007)

Add to Collection

Article Engineering, Environmental

Valorization of post-consumer waste plastic in cementitious concrete composites

O. Yazoghli Marzouk et al.

WASTE MANAGEMENT (2007)

Add to Collection

Article Engineering, Environmental

Evolution of iron speciation during hydration of C(4)AF

J Rose et al.

WASTE MANAGEMENT (2006)

Add to Collection

Article Construction & Building Technology

Degradation of recycled PET fibers in Portland cement-based materials

DA Silva et al.

CEMENT AND CONCRETE RESEARCH (2005)

Add to Collection

Article Construction & Building Technology

Effects of waste PET bottles aggregate on the properties of concrete

YW Choi et al.

CEMENT AND CONCRETE RESEARCH (2005)

Add to Collection

Letter Materials Science, Multidisciplinary

ESEM evidence for through-solution transport during brownmillerite hydration

N Meller et al.

JOURNAL OF MATERIALS SCIENCE (2004)

Add to Collection

Article Construction & Building Technology

Delayed ettringite formation

HFW Taylor et al.

CEMENT AND CONCRETE RESEARCH (2001)

Add to Collection

Article Construction & Building Technology

A model for two types of calcium silicate hydrate in the microstructure of Portland cement pastes

PD Tennis et al.

CEMENT AND CONCRETE RESEARCH (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.