☆ 4.8 Review

Lignin-Based Materials for Additive Manufacturing: Chemistry, Processing, Structures, Properties, and Applications

ADVANCED SCIENCE (2023)

Related references

Note: Only part of the references are listed.

Article Nanoscience & Nanotechnology

Meniscus-Guided 3D Microprinting of Pure Metal-Organic Frameworks with High Gas-Uptake Performance

Yu Liu et al.

Summary: This study demonstrates the use of meniscus-guided 3D printing to produce high gas-uptake pure MOF monoliths. The technique allows for high spatial resolution printing without the need for additives or mechanical forces. The resulting HKUST-1 monoliths exhibit superior surface area.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection

Review Chemistry, Multidisciplinary

3D-Printed Anisotropic Polymer Materials for Functional Applications

Jiayao Chen et al.

Summary: The anisotropy of materials has attracted significant research interest for its wide applications, especially in aerospace, sensing, soft robotics, and tissue engineering. 3D printing allows for controlled compositions and complex architecture, enabling the manufacture of 3D objects with anisotropic functionalities. Different techniques including material extrusion, vat photopolymerization, powder bed fusion, and sheet lamination have been utilized in the 3D printing of anisotropic polymer materials.

ADVANCED MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Strikingly high amount of tricin-lignin observed from vanilla (Vanilla planifolia) aerial roots

Mi Li et al.

Summary: This study revealed a particularly high level of tricin-lignin in vanilla plant, especially in the aerial roots, which could play a vital role in valorization of lignin and offer new ways to design and engineer lignin structures for improved plant properties.

GREEN CHEMISTRY (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Lignin-derived materials and their applications in rechargeable batteries

Wei-Jing Chen et al.

Summary: Lignin, as the most abundant aromatic polymer in nature, has attracted worldwide attention for its potential in constructing high-performance rechargeable batteries due to its abundance, low cost, and environmentally friendly nature. Recent research has focused on lignin-derived materials in electrodes, binders, separators, and electrolytes for rechargeable batteries. Future development will continue to advance the application of lignin-derived materials in rechargeable batteries.

GREEN CHEMISTRY (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Lignin-based carbon fiber: A renewable and low-cost substitute towards featured fiber-shaped pseudocapacitor electrodes

Wangda Qu et al.

Summary: This study developed lignin-based carbon fiber (LCF) with high mechanical properties and flexibility, providing a new approach for the fabrication of functional fiber-shaped electrodes.

JOURNAL OF CLEANER PRODUCTION (2022)

Add to Collection

Article Multidisciplinary Sciences

Carbohydrate-aromatic interface and molecular architecture of lignocellulose

Alex Kirui et al.

Summary: In this study, the assembly of lignocellulosic components in plant stems and the interactions between polysaccharides and the aromatic polymer lignin are investigated using solid-state NMR spectroscopy. The research shows that the extent of glycan-aromatic association varies in different types of plant stems, and lignin primarily interacts with xylan through non-covalent interactions and partially binds to the junction of xylan and cellulose surface. The unique feature of homogeneous mixing of all molecules in softwoods enables better water retention. These findings provide insights into the principles of polymer interactions underlying the heterogeneous architecture of lignocellulose, which can guide the rational design of more digestible plants and more efficient biomass-conversion pathways.

NATURE COMMUNICATIONS (2022)

Add to Collection

Article Polymer Science

Wood Warping Composite by 3D Printing

Doron Kam et al.

Summary: This article presents an investigation on wood warped objects fabricated by 3D printing. The printing pathway and flow rate can be predesigned to control the resulting structure after drying. By carefully tuning the flow rate and printing pathway, the morphology of the fully dried wooden objects can be controlled.

POLYMERS (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Interfacial Assembly of Functional Mesoporous Carbon-Based Materials into Films for Batteries and Electrocatalysis

Hongbin Xu et al.

Summary: The synthesis of mesoporous carbon-based films and devices through interfacial assembly strategies has gained significant development. Template and template-free methods are two common approaches to obtain unique structures of mesoporous carbon-based materials. Additionally, five primary interfacial assembly methods for film preparation are discussed with detailed synthesis processes and mechanisms. The applications of mesoporous carbon-based film devices in electrochemical energy systems, such as batteries and electrocatalysis, are reviewed along with their mechanisms to enhance system performance.

ADVANCED MATERIALS INTERFACES (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Sacrificial 3D Printing of Highly Porous, Soft Pressure Sensors

Meshari Alsharari et al.

Summary: Additive manufacturing technologies like fused deposition modeling offer the potential for rapid prototyping and innovative designs. This paper introduces a method for fabricating soft compressible multi-layered pressure sensors through FDM 3D multi-material printing, resulting in highly sensitive and tunable sensors with enhanced compressibility and wide sensing range.

ADVANCED ELECTRONIC MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

On-Demand, Direct Printing of Nanodiamonds at the Quantum Level

Zhaoyi Xu et al.

Summary: This study introduces a direct, on-demand electrohydrodynamic printing method for nanodiamonds containing NV centers, allowing high precision control over quantity and position without the need for lithographic processes. The approach has the potential to open up new possibilities for experimental quantum physics and practical implementation of quantum systems.

ADVANCED SCIENCE (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Growing environmental footprint of plastics driven by coal combustion

Livia Cabernard et al.

Summary: Despite concerns about plastics in the environment, not enough attention is paid to the impacts of the various stages of the plastics value chain globally. The environmental and socioeconomic impacts from plastics are mainly due to their growing production in coal-based economies.

NATURE SUSTAINABILITY (2022)

Add to Collection

Article Engineering, Biomedical

How far is Lignin from being a biomedical material?

Sigit Sugiarto et al.

Summary: The review highlights the potential of utilizing lignin as a versatile biomaterial and discusses the challenges and outlook in developing and enhancing biomaterials through chemical modifications of lignin.

BIOACTIVE MATERIALS (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Direct Ink Writing: A 3D Printing Technology for Diverse Materials

M. A. S. R. Saadi et al.

Summary: Direct ink writing (DIW) is a versatile 3D printing technique that allows printing of a wide range of materials. This comprehensive review explores the process of DIW printing of complex 3D structures and discusses its diverse applications in various industries.

ADVANCED MATERIALS (2022)

Add to Collection

Review Engineering, Multidisciplinary

Recent advances in 3D printing of tough hydrogels: A review

Xin Ning Zhang et al.

Summary: This paper reviews the recent progress in 3D printing of tough hydrogels and their applications. It provides an overview of the advantages and requirements of tough hydrogel systems for specific 3D printing technologies, and summarizes the network structures, mechanical performances, toughening mechanisms, and representative applications of the printed tough hydrogels. It also discusses the recent advances in 4D printing of tough hydrogels as a prospective direction for soft actuators and robots.

COMPOSITES PART B-ENGINEERING (2022)

Add to Collection

Article Thermodynamics

Tree-inspired lignin microrods-based composite heterogeneous nanochannels for ion transport and osmotic energy harvesting

Peng Cheng et al.

Summary: In this study, a lignin-based nanofluidic membrane was synthesized to mimic the channels in trees, allowing for ion transport and reverse electrodialysis. The membrane, composed of fusiform microrods, was able to transport counter-ions and harvest osmotic energy.

ENERGY CONVERSION AND MANAGEMENT (2022)

Add to Collection

Article Biochemistry & Molecular Biology

Functionalized lignin nanoparticles for producing mechanically strong and tough flame-retardant polyurethane elastomers

Tian He et al.

Summary: A novel nano functionalized lignin nanoparticle (Nano-FL) was developed as both crosslinking agents and flame retardants in polyurethane elastomers (PUE). The Nano-FL showed good compatibility and dispersibility in the PUE matrix, enhancing the mechanical and flame retardancy performance of the PUE materials.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Monodispersed Lignin Colloidal Spheres with Tailorable Sizes for Bio-Photonic Materials

Jingyu Wang et al.

Summary: This study reports a method for fabricating monodispersed LCSs and demonstrates an innovative application of lignin as bio-photonic materials. The research not only reveals the mechanism for eliminating the inhomogeneity of LCSs, but also showcases the great potential of lignin in the field of photonics.

SMALL (2022)

Add to Collection

Article Engineering, Manufacturing

Hybrid-3D printing of symmetric solid oxide cells by inkjet printing and robocasting

S. Anelli et al.

Summary: This study presents a new method for the fabrication of Solid Oxide Cells (SOCs) using self-standing robocast electrodes combined with inkjet printed electrolytes, completed through a cosintering process. Analysis and testing of the cells' characteristics confirmed the feasibility and reproducibility of this fabrication method.

ADDITIVE MANUFACTURING (2022)

Add to Collection

Article Materials Science, Multidisciplinary

A comprehensive analysis on the processing-structure-property relationships of FDM-based 3-D printed polyetheretherketone (PEEK) structures

Prabaha Sikder et al.

Summary: This study investigates the impact of various FDM parameters on the mechanical properties of 3D printed PEEK and establishes a processing-structure-property relationship for FDM-developed PEEK parts. The study finds that nozzle and chamber temperature, layer height, and print speed are critical for developing robust PEEK structures. Annealing contributes to achieving PEEK parts with excellent tensile, compressive, and flexural strengths.

MATERIALIA (2022)

Add to Collection

Article Engineering, Manufacturing

A kinetic model for predicting imperfections in bioink photopolymerization during visible-light stereolithography printing

Hitendra Kumar et al.

Summary: In this study, a detailed numerical model was presented to predict the hydrogel formation in visible light bioprinting and to design scaffolds and plan the SLA bioprinting process. The model simulated the kinetics of photoinitiation, quenching, and polymerization reactions to predict the hydrogel structures and highlighted some inaccuracies in the bioprinting process.

ADDITIVE MANUFACTURING (2022)

Add to Collection

Article Agricultural Engineering

3D printing of crude lignocellulosic biomass extracts containing hemicellulose and lignin

E. Gokce Bahcegul et al.

Summary: Using lignocellulosic biomass for polymeric material applications is an attractive option due to its abundance, biodegradability, and renewability. This study developed a novel method for 3D printing the alkaline soluble portion of corn cobs without any purification or modification. The printing parameters were optimized, and the models were fixed using ethanol.

INDUSTRIAL CROPS AND PRODUCTS (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Plant Nanomaterials and Inspiration from Nature: Water Interactions and Hierarchically Structured Hydrogels

Rubina Ajdary et al.

Summary: Recent developments in plant-based hydrogels, especially those derived from wood, are discussed in this article. The importance of water interactions, hydration, and swelling in designing and processing sustainable and functional hydrogels is highlighted. The role of water in developing hydrogel properties and uses is also emphasized.

ADVANCED MATERIALS (2021)

Add to Collection

Article Engineering, Multidisciplinary

Influence of plasticizers on thermal and mechanical properties of biocomposite filaments made from lignin and polylactic acid for 3D printing

Sanjita Wasti et al.

Summary: This study investigates the effects of adding plasticizers on the mechanical properties of PLA-lignin composite filaments, with 2% PEG enhancing tensile stress and elongation by 19% and 35% in PLA_L20 composite, while struktol TR451 improves elongation at maximum load by 24%.

COMPOSITES PART B-ENGINEERING (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Environmental applications of carbon-based materials: a review

Kannapan Panchamoorthy Gopinath et al.

Summary: Carbon-based materials such as biochar, activated carbon, carbon nanotubes and graphene play a crucial role in environmental pollution control. They demonstrate high adsorption and removal efficiency for toxic gases and pollutants in air and water, while also significantly impacting biogas production and ammonia emissions.

ENVIRONMENTAL CHEMISTRY LETTERS (2021)

Add to Collection

Article Chemistry, Physical

3D printing of graphene oxide composites with well controlled alignment

Yue Qian et al.

Summary: The study introduces a universal strategy for large-scale alignment of graphene oxide without the need for modification. By laminating, scrolling, and 3D printing, graphene oxide nanosheets are aligned in the filament axial direction, resulting in improved mechanical properties of the composite materials.

CARBON (2021)

Add to Collection

Review Chemistry, Physical

Review on the electromagnetic interference shielding properties of carbon based materials and their novel composites: Recent progress, challenges and prospects

Nannan Wu et al.

Summary: The rapid development of electronic devices has raised concerns about electromagnetic radiation issues, and the most effective way to address electromagnetic pollution is to fabricate electromagnetic interference shielding materials and microwave absorption materials with lightweight and strong attenuation abilities. Carbon nanocomposites have attracted attention in the field of electromagnetic interference shielding due to their low density, natural abundance, easy preparation, excellent conductivity, and flexibility. Recent advancements in carbon materials as ESMs/MAMs have shown that 3D carbon materials and novel composites have the potential to enhance electromagnetic interference shielding efficiency.

CARBON (2021)

Add to Collection

Review Biochemistry & Molecular Biology

Biological Activities and Emerging Roles of Lignin and Lignin-Based Products-A Review

Fan Shu et al.

Summary: Bioactive substances derived from plants, such as lignin, have shown various health benefits and medical applications. Lignin not only possesses intrinsic bioactivities against phytopathogens, but also has potential for antitumor, antivirus activities, regulation of plant growth, and enzymatic hydrolysis of cellulose. This review highlights the bioactive potential of lignin in various fields and explores its bonding mechanisms with biotissues and cells for the conversion into value-added materials.

BIOMACROMOLECULES (2021)

Add to Collection

Article Agricultural Engineering

Lignin-derived graphene quantum dots from phosphous acid-assisted hydrothermal pretreatment and their application in photocatalysis

Wei Liu et al.

Summary: The study introduced a phosphorous acid-assisted hydrothermal process for the production of lignin-derived graphene quantum dots, which exhibit excellent photocatalytic degradation ability towards methylene blue and model lignin when used in a heterojunction structure. This research offers a universal strategy for the value-added utilization and valorization of lignin.

INDUSTRIAL CROPS AND PRODUCTS (2021)

Add to Collection

Article Agricultural Engineering

Chemical and structural characterization of hardwood and softwood LignoForce™ lignins

Maria Juliane Suota et al.

Summary: This paper provides a detailed characterization of hardwood and softwood kraft lignins obtained from industrial production facilities, focusing on their macromolecular properties and functional groups. LFHL and LFSL both had high lignin contents and low ash and carbohydrate contents. LFHL, with higher methoxyl content and solubility, is suitable for polyurethane foam production, while LFSL could be used for phenolformaldehyde resin replacement and carbon fiber production.

INDUSTRIAL CROPS AND PRODUCTS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Termite Gut Microbiota Contribution to Wheat Straw Delignification in Anaerobic Bioreactors

Louison Dumond et al.

Summary: The study found that the gut microbiomes of termites have the potential to degrade lignin under anaerobic conditions, effectively removing lignin, hemicellulose, and cellulose, indicating a partial deconstruction of lignin.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

Add to Collection

Article Engineering, Environmental

Enhanced wood-derived photothermal evaporation system by in-situ incorporated lignin carbon quantum dots

Weixiang Chao et al.

Summary: The novel green photothermal evaporation system shows high efficiency and stability, with economic and ecological advantages. Through simulation and numerical modeling, the key factors affecting water transportation and evaporation processes were analyzed.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Multidisciplinary Sciences

Developing fibrillated cellulose as a sustainable technological material

Tian Li et al.

Summary: Fibrillated cellulose, derived from renewable resources, has unique technological appeal and sustainability potential. Research demonstrates its wide applications in material fabrication, but challenges remain to be overcome.

NATURE (2021)

Add to Collection

Article Materials Science, Composites

Homogeneous distribution of lignin/graphene fillers with enhanced interlayer adhesion for 3D printing filament

Denesh Mohan et al.

Summary: This study demonstrates the use of organosolv lignin fillers and graphene nanoplatelets as reinforcements in ABS filament for 3D printing, showing significant improvements in mechanical properties and interlayer adhesion. While the use of lignin/GnP composite filaments may impact surface finish, it still showcases the feasibility of using biofillers for complex geometries in FDM 3D printing.

POLYMER COMPOSITES (2021)

Add to Collection

Editorial Material Multidisciplinary Sciences

Microplastics and human health

A. Dick Vethaak et al.

SCIENCE (2021)

Add to Collection

Review Chemistry, Physical

Carbon-Based Materials for Electrochemical Reduction of CO2 to C2+ Oxygenates: Recent Progress and Remaining Challenges

Kun Zhao et al.

Summary: This review summarizes recent progress in the formation of C2+ oxygenates from CO2 reduction on carbon-based materials, highlighting strategies for achieving C-C coupling, the relationship between intermediate adsorption energy and selectivity of oxygenate production, and mechanisms of C2+ oxygenate generation and active site fabrication on carbon-based materials. Challenges and opportunities for electrochemical conversion of CO2 into C2+ oxygenates were discussed.

ACS CATALYSIS (2021)

Add to Collection

Article Polymer Science

Preparation of Chemically Modified Lignin-Reinforced PLA Biocomposites and Their 3D Printing Performance

Seo-Hwa Hong et al.

Summary: By conducting a simple esterification reaction, pristine lignin was converted to a new lignin modified with a terminal carboxyl group. Incorporating the COOH-lignin into PLA biocomposites can reduce the cost of printing PLA 3D filaments without altering their thermal and mechanical properties.

POLYMERS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Selective Laser Sintering of Lignin-Based Composites

Rubina Ajdary et al.

Summary: In the study, lignin was introduced as a suitable component for selective laser sintering (SLS) of polyamide (PA12) to reduce costs while maintaining or improving processability and performance. The addition of lignin in SLS resulted in composite material with improved thermal stability and mechanical properties, while also influencing the surface properties and wettability of the structures. The research demonstrated the potential of lignin valorization in composites through SLS, allowing for reduced cost, scalability, and easy processing.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

Add to Collection

Article Multidisciplinary Sciences

Soft elasticity optimises dissipation in 3D-printed liquid crystal elastomers

D. Mistry et al.

Summary: The study investigates the soft-elasticity characteristics of monodomain liquid crystal elastomers (LCEs) and their potential for impact absorption. Through the use of direct-ink writing technology, sufficiently large monodomain LCE devices were successfully fabricated. The research found that monodomain soft-elastic LCE performed well at different strain rates and excelled in reducing the severity of impacts.

NATURE COMMUNICATIONS (2021)

Add to Collection

Article Polymer Science

Improving UV Curing in Organosolv Lignin-Containing Photopolymers for Stereolithography by Reduction and Acylation

Jordan T. Sutton et al.

Summary: Chemical modification techniques can reduce UV absorption by lignin, leading to improved stiffness and strength in resins when modified lignins are used. However, the thermal stability decreases. Studying these techniques is important for the development of lignin for UV-curing applications and commercial use.

POLYMERS (2021)

Add to Collection

Review Biochemistry & Molecular Biology

3D printing of lignin: Challenges, opportunities and roads onward

L. -S. Ebers et al.

Summary: As lignin becomes more readily available in separated and purified form on an industrial scale, it plays a crucial role in transitioning the material industry towards sustainability. The integration of lignin research into additive manufacturing technology has led to the emergence of lignin 3D printing, offering opportunities for sustainable industrial solutions. By molecularly selecting and tuning the attributes of technical lignin systems, desirable properties can be achieved in engineered products.

BIOPOLYMERS (2021)

Add to Collection

Article Chemistry, Applied

Agarose composite hydrogel and PVA sacrificial materials for bioprinting large-scale, personalized face-like with nutrient networks

Qiang Zou et al.

Summary: This study successfully constructed non-collapsing 3D structures using three polysaccharide hydrogel composites, which are beneficial for the construction of personalized, complex, and vascularized tissue-engineered anatomical faces.

CARBOHYDRATE POLYMERS (2021)

Add to Collection

Review Materials Science, Multidisciplinary

A review on wood powders in 3D printing: processes, properties and potential applications

Atanu Kumar Das et al.

Summary: Wood powder, as a raw material for 3D printing, can reduce costs and increase sustainability when combined with natural binders. However, further research is needed to explore the potential for future applications.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Add to Collection

Article Pharmacology & Pharmacy

Effects of porosity on drug release kinetics of swellable and erodible porous pharmaceutical solid dosage forms fabricated by hot melt droplet deposition 3D printing

Bin Zhang et al.

Summary: This study utilized 3D printing to produce porous pharmaceutical solid dosage forms and investigated the effects of porosity on drug release by altering the infill percentages. The results revealed that drug release kinetics were controlled by the complex interplay of porosity and dynamic changes of the tablets caused by swelling and erosion in different solutions.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)

Add to Collection

Article Engineering, Manufacturing

Water-soluble sacrificial 3D printed molds for fast prototyping in ceramic injection molding

Rene Wick-Joliat et al.

Summary: Researchers have developed a new strategy for using 3D printed sacrificial molds to injection mold complex geometries of ceramic parts. A comparison revealed that DLP printed molds are better suited for parts with very small structural features.

ADDITIVE MANUFACTURING (2021)

Add to Collection

Article Materials Science, Paper & Wood

Syringyl ratio and its relation to the erythro ratio of β-O-4-structure in leaf cell walls

Zeming Xu et al.

Summary: The relationship between the S ratio and E ratio was studied in wood cell walls, with some correlation found in leaf and stem samples but not as clear as in woods. The distinction between wood, stem, and leaf samples was shown to be based on the yield of ozonation and nitrobenzene oxidation products rather than lignin content obtained by the Klason method.

JOURNAL OF WOOD CHEMISTRY AND TECHNOLOGY (2021)

Add to Collection

Article Multidisciplinary Sciences

Biomimetic high performance artificial muscle built on sacrificial coordination network and mechanical training process

Zhikai Tu et al.

Summary: This study demonstrates a novel approach to optimize the characteristics of artificial muscle materials through rearranging dynamic sacrificial bonds via a mechanical training process, achieving excellent self-strengthening, strain-adaptive stiffening, and actuation performance.

NATURE COMMUNICATIONS (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Direct Ink Writing of Materials for Electronics-Related Applications: A Mini Review

Zhenzhong Hou et al.

Summary: The fabrication of electronics-related components via direct ink writing (DIW) has attracted much attention recently due to the more complicated structures, higher accuracy, improved efficiency, and enhanced performances. DIW technology allows materials to be directly printed on a variety of flat substrates, making it suitable for applications such as wearable devices and on-chip integrations. The combination of DIW and electronic devices will help to improve the quality of human life and promote the development of science and society.

FRONTIERS IN MATERIALS (2021)

Add to Collection

Article Engineering, Manufacturing

Integrating digital light processing with direct ink writing for hybrid 3D printing of functional structures and devices

Xirui Peng et al.

Summary: This study introduces a hybrid multi-material 3D printing system that combines DLP printing and DIW printing technologies to fabricate composite structures and unique devices in a single printing job. The system allows for the use of a variety of inks and resins to print functional composites, providing a new printing solution for applications in soft robotics, electronics, active metamaterials, and biomedical devices.

ADDITIVE MANUFACTURING (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Scalable Wood Hydrogel Membrane with Nanoscale Channels

Gegu Chen et al.

Summary: Efforts have been made to explore nanofluidic systems for applications such as water purification and energy generation. A cost-effective and scalable method has been demonstrated to fabricate a highly conductive nanofluidic wood hydrogel membrane capable of ion transport. This membrane shows significantly higher strength and ionic conductivity compared to natural wood.

ACS NANO (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Wood-Inspired Binder Enabled Vertical 3D Printing of g-C3N4/CNT Arrays for Highly Efficient Photoelectrochemical Hydrogen Evolution

Bo Jiang et al.

Summary: Inspired by wood structures, a vertical 3D printing strategy was developed to fabricate vertically aligned and hierarchically porous g-C3N4/CNT arrays for efficient photoelectrochemical hydrogen evolution. The resulting arrays exhibited excellent hydrogen evolution performance, overcoming aggregation issues of traditional g-C3N4, and showing high potential for practical applications.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

3D Printing of Functional Magnetic Materials: From Design to Applications

Chengqian Zhang et al.

Summary: Functional magnetic materials have gained attention due to their fast, long-range, and precise response in diverse environments. However, the required materials and structure designs for various functions have increased fabrication difficulties. 3D printing technology offers a powerful and promising approach to manufacturing functional magnetic devices of complex geometries.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Review Materials Science, Biomaterials

Additive manufacturing of polyhydroxyalkanoates (PHAs) biopolymers: Materials, printing techniques, and applications

Mehrshad Mehrpouya et al.

Summary: Additive manufacturing (AM) is a fast, reliable, and highly flexible solution for processing various materials and creating customized end-goods, with particular relevance placed on the use of biomaterials. Polyhydroxyalkanoates (PHAs) are emerging as a biobased and biodegradable material achievable through bacterial fermentation, with promising reports on manufacturing commodities in PHAs by additive manufacturing, although challenges remain for further expansion of their use.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Three-Dimensional Perovskite Nanopixels for Ultrahigh-Resolution Color Displays and Multilevel Anticounterfeiting

Mojun Chen et al.

Summary: By utilizing nanoscale 3D printing, colored perovskite pixels with programmed dimensions, placements, and emission characteristics are successfully fabricated, achieving highly confined, out-of-plane crystallization process and generating 3D red, green, and blue (RGB) perovskite nanopixels with ultrahigh integration density. These novel nanopixels enhance emission brightness without sacrificing lateral resolution, making them suitable for manufacturing high-resolution displays with improved brightness.

NANO LETTERS (2021)

Add to Collection

Review Multidisciplinary Sciences

Plastics in the Earth system

Aron Stubbins et al.

Summary: Plastic pollution has become a global issue, prompting us to consider plastics as emergent geomaterials never before seen in Earth's history. With high carbon content, plastics can rival natural organic carbon in some ecosystems, prompting geochemists to include plastics in their analyses to expedite understanding of plastics in the Earth system. Furthermore, plastics can serve as global-scale tracers to advance Earth system science.

SCIENCE (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Critical review of FDM 3D printing of PLA biocomposites filled with biomass resources, characterization, biodegradability, upcycling and opportunities for biorefineries

Samarthya Bhagia et al.

Summary: This article discusses advanced additive manufacturing technology using biomass resources to 3D print polylactic acid, as well as the potential of biodegradable composites to replace non-biodegradable composites in environmentally friendly applications. A deep understanding of printing such biocomposites is crucial for supporting such manufacturing processes.

APPLIED MATERIALS TODAY (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Direct ink writing of three-dimensional thermoelectric microarchitectures

Fredrick Kim et al.

Summary: Microscale three-dimensional thermoelectric architectures can be fabricated through direct writing of particle-based thermoelectric inks, producing microthermoelectric generators with high power density.

NATURE ELECTRONICS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Review on lignin modifications toward natural UV protection ingredient for lignin-based sunscreens

My Ha Tran et al.

Summary: Lignin possesses excellent UV-blocking ability but its intrinsic dark color limits its application in lignin-based sunscreens; to address this issue, researchers have developed various methods including fractionation and modification of lignin's chemical structure, morphology, and particle size.

GREEN CHEMISTRY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

A facile spectroscopic method for measuring lignin content in lignocellulosic biomass

Fachuang Lu et al.

Summary: Measuring lignin content in lignocellulosic biomass is a challenging task, but the CASA method provides a simple solution with satisfactory accuracy and correlation.

GREEN CHEMISTRY (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Direct ink writing of energy materials

S. Tagliaferri et al.

Summary: This review discusses the application of 3D printing technology in sustainable energy device fabrication, focusing on the growth of extrusion-based 3D printing in manufacturing batteries, supercapacitors, and catalytic systems. The critical role of ink formulation and rheological characteristics on the functional performance of printed devices is emphasized, along with a review of strategies for obtaining printable inks from energy materials and the challenges and opportunities for future development.

MATERIALS ADVANCES (2021)

Add to Collection

Article Chemistry, Multidisciplinary

3D Printing Materials for Soft Robotics

Ela Sachyani Keneth et al.

Summary: Soft robotics, created from highly compliant materials, is a burgeoning field with diverse applications. 3D printing offers a novel approach to forming complex objects in the realm of soft robotics, with a focus on material advancements and fabrication challenges.

ADVANCED MATERIALS (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Process-Structure-Properties in Polymer Additive Manufacturing via Material Extrusion: A Review

G. D. Goh et al.

CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Lignin as a Wood-Inspired Binder Enabled Strong, Water Stable, and Biodegradable Paper for Plastic Replacement

Bo Jiang et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Two-Step 3 D-Printing Approach toward Sustainable, Repairable, Fluorescent Shape-Memory Thermosets Derived from Cellulose and Rosin

Chuanwei Lu et al.

CHEMSUSCHEM (2020)

Add to Collection

Article Forestry

Effects of the infill pattern on mechanical properties of fused layer modeling (FLM) 3D printed wood/polylactic acid (PLA) composites

S. Kain et al.

EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

3D Printing Mechanically Robust and Transparent Polyurethane Elastomers for Stretchable Electronic Sensors

Shuqiang Peng et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Biochemistry & Molecular Biology

Lignin-Assisted Stabilization of an Oriented Liquid Crystalline Cellulosic Mesophase, Part A: Observation of Microstructural and Mechanical Behavior

F. Robert Gleuwitz et al.

BIOMACROMOLECULES (2020)

Add to Collection

Article Biochemistry & Molecular Biology

Three-Dimensional Printed Cell Culture Model Based on Spherical Colloidal Lignin Particles and Cellulose Nanofibril-Alginate Hydrogel

Xue Zhang et al.

BIOMACROMOLECULES (2020)

Add to Collection

Article Materials Science, Composites

3D printed shape-programmable magneto-active soft matter for biomimetic applications

Song Qi et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2020)

Add to Collection

Review Engineering, Manufacturing

Additively manufactured carbon fiber-reinforced composites: State of the art and perspective

Nekoda van de Werken et al.

ADDITIVE MANUFACTURING (2020)

Add to Collection

Article Chemistry, Multidisciplinary

A Cast Net Thrown onto an Interface: Wrapping 3D Objects with an Interfacially Jammed Amphiphilic Sheet

Mengmeng Cui et al.

ADVANCED MATERIALS INTERFACES (2020)

Add to Collection

Article Chemistry, Multidisciplinary

A Design and Fabrication Method for Wood-Inspired Composites by Micro X-Ray Computed Tomography and 3D Printing

Yubo Tao et al.

APPLIED SCIENCES-BASEL (2020)

Add to Collection

Article Multidisciplinary Sciences

3D printing of conducting polymers

Hyunwoo Yuk et al.

NATURE COMMUNICATIONS (2020)

Add to Collection

Article Polymer Science

Micrometer Copper-Zinc Alloy Particles-Reinforced Wood Plastic Composites with High Gloss and Antibacterial Properties for 3D Printing

Feiwen Yang et al.

POLYMERS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Perspective on Technical Lignin Fractionation

Hasan Sadeghifar et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Three-Dimensional Printing Fully Biobased Heat-Resistant Photoactive Acrylates from Aliphatic Biomass

Jia-Tao Miao et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)

Add to Collection

Article Materials Science, Multidisciplinary

3D printing vertically: Direct ink writing free-standing pillar arrays

Bo Nan et al.

MATERIALS TODAY (2020)

Add to Collection

Review Nanoscience & Nanotechnology

Structure-property-function relationships of natural and engineered wood

Chaoji Chen et al.

NATURE REVIEWS MATERIALS (2020)

Add to Collection

Article Engineering, Manufacturing

Stereolithography (SLA) 3D printing of an antihypertensive polyprintlet: Case study of an unexpected photopolymer-drug reaction

Xiaoyan Xu et al.

ADDITIVE MANUFACTURING (2020)

Add to Collection

Article Chemistry, Multidisciplinary

3D-Printed Quantum Dot Nanopixels

Jongcheon Bae et al.

ACS NANO (2020)

Add to Collection

Article Materials Science, Multidisciplinary

3D-Printed Wood-Fiber Reinforced Architected Cellular Composites

Ehsan Estakhrianhaghighi et al.

ADVANCED ENGINEERING MATERIALS (2020)

Add to Collection

Review Chemistry, Applied

A flavonoid monomer tricin in Gramineous plants: Metabolism, bio/chemosynthesis, biological properties, and toxicology

Bo Jiang et al.

FOOD CHEMISTRY (2020)

Add to Collection

Article Pharmacology & Pharmacy

3D printing: Principles and pharmaceutical applications of selective laser sintering

Atheer Awad et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)

Add to Collection

Editorial Material Nanoscience & Nanotechnology

Solutions to plastic pollution

Christine Horejs

NATURE REVIEWS MATERIALS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

On-Demand 3D Printing of Nanowire Probes for High-Aspect-Ratio Atomic Force Microscopy Imaging

Heekwon Lee et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Lignin-graphene oxide inks for 3D printing of graphitic materials with tunable density

Julien Roman et al.

NANO TODAY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Lignin-Based Direct Ink Printed Structural Scaffolds

Bo Jiang et al.

SMALL (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Combined Catalysis for Engineering Bioinspired, Lignin-Based, Long-Lasting, Adhesive, Self-Mending, Antimicrobial Hydrogels

Samson Afewerki et al.

ACS NANO (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Direct Ink Writing of Fully Bio-Based Liquid Crystalline Lignin/ Hydroxypropyl Cellulose Aqueous Inks: Optimization of Formulations and Printing Parameters

Lisa-Sophie Ebers et al.

ACS APPLIED BIO MATERIALS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Lignin in Bio-Based Liquid Crystalline Network Material with Potential for Direct Ink Writing

F. Robert Gleuwitz et al.

ACS APPLIED BIO MATERIALS (2020)

Add to Collection

Review Engineering, Multidisciplinary

A critical review on the fused deposition modeling of thermoplastic polymer composites

Pavan Kumar Penumakala et al.

COMPOSITES PART B-ENGINEERING (2020)

Add to Collection

Article Environmental Sciences

Lignin-based magnetic activated carbon for p-arsanilic acid removal: Applications and absorption mechanisms

Qiong Wu et al.

CHEMOSPHERE (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Lignin-based smart materials: a roadmap to processing and synthesis for current and future applications

Adrian Moreno et al.

MATERIALS HORIZONS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Fused deposition modeling-based additive manufacturing (3D printing): techniques for polymer material systems

S. C. Daminabo et al.

MATERIALS TODAY CHEMISTRY (2020)

Add to Collection

Article Chemistry, Physical

Direct ink writing advances in multi-material structures for a sustainable future

Victoria G. Rocha et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Review Chemistry, Multidisciplinary

3D printing of biomass-derived composites: application and characterization approaches

Anqi Ji et al.

RSC ADVANCES (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Selectively transform lignin into value-added chemicals

Qingqing Mei et al.

CHINESE CHEMICAL LETTERS (2019)

Add to Collection

Article Engineering, Chemical

A green SPEEK/lignin composite membrane with high ion selectivity for vanadium redox flow battery

Jiaye Ye et al.

JOURNAL OF MEMBRANE SCIENCE (2019)

Add to Collection

Article Materials Science, Paper & Wood

Compatibility of Kraft Lignin, Organosolv Lignin and Lignosulfonate With PLA in 3D Printing

Vebi Mimini et al.

JOURNAL OF WOOD CHEMISTRY AND TECHNOLOGY (2019)

Add to Collection

Article Multidisciplinary Sciences

Volumetric additive manufacturing via tomographic reconstruction

Brett E. Kelly et al.

SCIENCE (2019)

Add to Collection

Article Multidisciplinary Sciences

A nanofluidic ion regulation membrane with aligned cellulose nanofibers

Tian Li et al.

SCIENCE ADVANCES (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Lignin for Nano- and Microscaled Carrier Systems: Applications, Trends, and Challenges

Mika Henrikki Sipponen et al.

CHEMSUSCHEM (2019)

Add to Collection

Review Biochemical Research Methods

Lignin biosynthesis and its integration into metabolism

Ruben Vanholme et al.

CURRENT OPINION IN BIOTECHNOLOGY (2019)

Add to Collection

Review Biochemical Research Methods

Lignin-based polymers and nanomaterials

Adam Grossman et al.

CURRENT OPINION IN BIOTECHNOLOGY (2019)

Add to Collection

Review Biochemical Research Methods

Lignin structure and its engineering

John Ralph et al.

CURRENT OPINION IN BIOTECHNOLOGY (2019)

Add to Collection

Article Agricultural Engineering

Physical and chemical characteristics of pretreated slash pine sawdust influence its enzymatic hydrolysis

Julia Kruyeniski et al.

INDUSTRIAL CROPS AND PRODUCTS (2019)

Add to Collection

Article Biochemistry & Molecular Biology

Structural characterization of lignin and its carbohydrate complexes isolated from bamboo (Dendrocalamus sinicus)

Gaofeng Xu et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Microstructure and mechanical property of Cf/SiC core/shell composite fabricated by direct ink writing

Yuanlin Xia et al.

SCRIPTA MATERIALIA (2019)

Add to Collection

Article Multidisciplinary Sciences

Dynamics of pore formation during laser powder bed fusion additive manufacturing

Aiden A. Martin et al.

NATURE COMMUNICATIONS (2019)

Add to Collection

Article Pharmacology & Pharmacy

Antioxidant PLA Composites Containing Lignin for 3D Printing Applications: A Potential Material for Healthcare Applications

Juan Dominguez-Robles et al.

PHARMACEUTICS (2019)

Add to Collection

Article Engineering, Biomedical

Permeability and mechanical properties of gradient porous PDMS scaffolds fabricated by 3D-printed sacrificial templates designed with minimal surfaces

H. Montazerian et al.

ACTA BIOMATERIALIA (2019)

Add to Collection

Article Engineering, Environmental

Human Consumption of Microplastics

Kieran D. Cox et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Additive Manufacturing of 3D Structures Composed of Wood Materials

Doron Kam et al.

ADVANCED MATERIALS TECHNOLOGIES (2019)

Add to Collection

Article Engineering, Manufacturing

Selective laser sintering and multi jet fusion: Process-induced modification of the raw materials and analyses of parts performance

Francesco Sillani et al.

ADDITIVE MANUFACTURING (2019)

Add to Collection

Article Engineering, Manufacturing

A robotic cell for performing sheet lamination-based additive manufacturing

Prahar M. Bhatt et al.

ADDITIVE MANUFACTURING (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Integrating softwood biorefinery lignin into polyhydroxybutyrate composites and application in 3D printing

Alankar A. Vaidya et al.

MATERIALS TODAY COMMUNICATIONS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

3D Nanoprinting of Perovskites

Mojun Chen et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Polymer Science

Evaluation of the Compatibility of Organosolv Lignin-Graphene Nanoplatelets with Photo-Curable Polyurethane in Stereolithography 3D Printing

Fathirrahman Ibrahim et al.

POLYMERS (2019)

Add to Collection

Review Engineering, Manufacturing

Binder jetting: A review of process, materials, and methods

Mohsen Ziaee et al.

ADDITIVE MANUFACTURING (2019)

Add to Collection

Article Chemistry, Multidisciplinary

General, Vertical, Three-Dimensional Printing of Two-Dimensional Materials with Multiscale Alignment

Zhiqiang Liang et al.

ACS NANO (2019)

Add to Collection

Article Biochemistry & Molecular Biology

Structure-antioxidant activity relationship of active oxygen catalytic lignin and lignin-carbohydrate complex

Bo Jiang et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2019)

Add to Collection

Article Multidisciplinary Sciences

Voxelated soft matter via multimaterial multinozzle 3D printing

Mark A. Skylar-Scott et al.

NATURE (2019)

Add to Collection

Article Multidisciplinary Sciences

Rapid, large-volume, thermally controlled 3D printing using a mobile liquid interface

David A. Walker et al.

SCIENCE (2019)

Add to Collection

Article Chemistry, Physical

Lignin: A Biopolymer from Forestry Biomass for Biocomposites and 3D Printing

Mihaela Tanase-Opedal et al.

MATERIALS (2019)

Add to Collection

Review Materials Science, Multidisciplinary

Additive Manufacturing of Biomaterials - The Evolution of Rapid Prototyping

Maria Touri et al.

ADVANCED ENGINEERING MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Biomimetic Supertough and Strong Biodegradable Polymeric Materials with Improved Thermal Properties and Excellent UV-Blocking Performance

Xiao Zhang et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection

Article Polymer Science

Microstructure and Mechanical Performance of 3D Printed Wood-PLA/PHA Using Fused Deposition Modelling: Effect of Printing Temperature

Sofiane Guessasma et al.

POLYMERS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Stereolithography 3D Printing of Lignin-Reinforced Composites with Enhanced Mechanical Properties

Shuyang Zhang et al.

ACS OMEGA (2019)

Add to Collection

Article Materials Science, Coatings & Films

Carbonaceous mudstone and lignin-derived activated carbon and its application for supercapacitor electrode

Ling Zeng et al.

SURFACE & COATINGS TECHNOLOGY (2019)

Add to Collection

Article Multidisciplinary Sciences

Lignin-polysaccharide interactions in plant secondary cell walls revealed by solid-state NMR

Xue Kang et al.

NATURE COMMUNICATIONS (2019)

Add to Collection

Article Chemistry, Physical

3D Printing of Tunable Energy Storage Devices with Both High Areal and Volumetric Energy Densities

Tingting Gao et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

High-Performance Lignin-Based Water-Soluble Macromolecular Photoinitiator for the Fabrication of Hybrid Hydrogel

Yuan Liu et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

Add to Collection

Article Chemistry, Physical

3D printing with 2D colloids: designing rheology protocols to predict printability' of soft-materials

Andrew Corker et al.

SOFT MATTER (2019)

Add to Collection

Review Management

Additive Manufacturing Applications in Industry 4.0: A Review

Abid Haleem et al.

JOURNAL OF INDUSTRIAL INTEGRATION AND MANAGEMENT-INNOVATION AND ENTREPRENEURSHIP (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Are lignin-derived carbon fibers graphitic enough?

William J. Sagues et al.

GREEN CHEMISTRY (2019)

Add to Collection

Review Materials Science, Multidisciplinary

Photopolymerization in 3D Printing

Ali Bagheri et al.

ACS APPLIED POLYMER MATERIALS (2019)

Add to Collection

Article Polymer Science

An Acrylonitrile-Butadiene-Lignin Renewable Skin with Programmable and Switchable Electrical Conductivity for Stress/Strain-Sensing Applications

Ngoc A. Nguyen et al.

MACROMOLECULES (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Meniscus-on-Demand Parallel 3D Nanoprinting

Mojun Chen et al.

ACS NANO (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Dynamics of Cellulose Nanocrystal Alignment during 3D Printing

Michael K. Hausmann et al.

ACS NANO (2018)

Add to Collection

Review Engineering, Biomedical

A review on fabricating tissue scaffolds using vat photopolymerization

Nicholas A. Chartrain et al.

ACTA BIOMATERIALIA (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Direct 3D Printing of Ultralight Graphene Oxide Aerogel Microlattices

Yanqiu Jiang et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

3D Printing of Liquid Crystal Elastomeric Actuators with Spatially Programed Nematic Order

Arda Kotikian et al.

ADVANCED MATERIALS (2018)

Add to Collection

Review Chemistry, Multidisciplinary

Chemicals from lignin: an interplay of lignocellulose fractionation, depolymerisation, and upgrading

W. Schutyser et al.

CHEMICAL SOCIETY REVIEWS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Charge and Potential Balancing for Optimized Capacitive Deionization Using Lignin-Derived, Low-Cost Activated Carbon Electrodes

Rafael Linzmeyer Zornitta et al.

CHEMSUSCHEM (2018)

Add to Collection

Article Materials Science, Composites

High temperature rheological behavior and sintering kinetics of CF/PEEK composites during selective laser sintering

Mengxue Yan et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Preparation of a lignin-based vitrimer material and its potential use for recoverable adhesives

Shuai Zhang et al.

GREEN CHEMISTRY (2018)

Add to Collection

Article Biochemistry & Molecular Biology

Structural elucidation and antioxidant activity of lignin isolated from rice straw and alkali oxygen black liquor

Bo Jiang et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2018)

Add to Collection

Article Green & Sustainable Science & Technology

An optimization approach of selective laser sintering considering energy consumption and material cost

Feng Ma et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Add to Collection

Article Forestry

Stereo-preference in the degradation of the erythro and threo isomers of beta-O-4-type lignin model compounds in oxidation processes III: in the reaction with chlorine- and manganese-based oxidants

Pattaraporn Posoknistakul et al.

JOURNAL OF WOOD SCIENCE (2018)

Add to Collection

Article Automation & Control Systems

Control-oriented models for ink-jet 3D printing

Yijie Guo et al.

MECHATRONICS (2018)

Add to Collection

Article Multidisciplinary Sciences

Rotational 3D printing of damage-tolerant composites with programmable mechanics

Jordan R. Raney et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2018)

Add to Collection

Review Materials Science, Multidisciplinary

Properties and chemical modifications of lignin: Towards lignin-based nanomaterials for biomedical applications

Patricia Figueiredo et al.

PROGRESS IN MATERIALS SCIENCE (2018)

Add to Collection

Review Materials Science, Multidisciplinary

Additive manufacturing of metallic components - Process, structure and properties

T. DebRoy et al.

PROGRESS IN MATERIALS SCIENCE (2018)

Add to Collection

Article Multidisciplinary Sciences

Improving wood properties for wood utilization through multi-omics integration in lignin biosynthesis

Jack P. Wang et al.

NATURE COMMUNICATIONS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Metal-Free Aqueous Flow Battery with Novel Ultrafiltered Lignin as Electrolyte

Alolika Mukhopadhyay et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)

Add to Collection

Review Chemistry, Applied

Lignin in storage and renewable energy applications: A review

Jose Luis Espinoza-Acosta et al.

JOURNAL OF ENERGY CHEMISTRY (2018)

Add to Collection

Review Materials Science, Multidisciplinary

Lignin-based carbon fiber: a current overview

Felipe Souto et al.

MATERIALS RESEARCH EXPRESS (2018)

Add to Collection

Article Materials Science, Multidisciplinary

3D-printing polymer-based permanent magnets

R. Domingo-Roca et al.

MATERIALS & DESIGN (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Lignin-Containing Photoactive Resins for 3D Printing by Stereolithography

Jordan T. Sutton et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Article Chemistry, Physical

Lignin Laser Lithography: A Direct-Write Method for Fabricating 3D Graphene Electrodes for Microsupercapacitors

Wenli Zhang et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Review Engineering, Multidisciplinary

A Review of 3D Printing Technology for Medical Applications

Qian Yan et al.

ENGINEERING (2018)

Add to Collection

Article Polymer Science

Influence of Processing Parameters on Tensile Properties of SLS Polymer Product

Ana Pilipovic et al.

POLYMERS (2018)

Add to Collection

Article Multidisciplinary Sciences

A path for lignin valorization via additive manufacturing of high-performance sustainable composites with enhanced 3D printability

Ngoc A. Nguyen et al.

SCIENCE ADVANCES (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Tough and Processable Hydrogels Based on Lignin and Hydrophilic Polyurethane

Farshad Oveissi et al.

ACS APPLIED BIO MATERIALS (2018)

Add to Collection

Review Chemistry, Multidisciplinary

Carbon quantum dots from natural resource: A review

Rashmita Das et al.

MATERIALS TODAY CHEMISTRY (2018)

Add to Collection

Proceedings Paper Engineering, Multidisciplinary

Mechanical Properties of Models Prepared by SLS Technology

Czeslaw Kundera et al.

XIII INTERNATIONAL CONFERENCE ELECTROMACHINING 2018 (2018)

Add to Collection

Article Engineering, Manufacturing

Effects of pore distribution and chemistry on physical, mechanical, and biological properties of tricalcium phosphate scaffolds by binder-jet 3D printing

Dongxu Ke et al.

ADDITIVE MANUFACTURING (2018)

Add to Collection

Article Materials Science, Multidisciplinary

general method to improve 3D-printability and inter-layer adhesion in lignin-based composites

Ngoc A. Nguyen et al.

APPLIED MATERIALS TODAY (2018)

Add to Collection

Proceedings Paper Engineering, Industrial

Study of the geometrical limitations associated to the metallic part manufacturing by the LMD process

Laura Arregui et al.

19TH CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING (2018)

Add to Collection

Article Engineering, Manufacturing

3D printing a mechanically-tunable acrylate resin on a commercial DLP-SLA printer

Joseph Borrello et al.

ADDITIVE MANUFACTURING (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Direct-Write Fabrication of 4D Active Shape-Changing Structures Based on a Shape Memory Polymer and Its Nanocomposite

Hongqiu Wei et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Progress in 3D Printing of Carbon Materials for Energy-Related Applications

Kun Fu et al.

ADVANCED MATERIALS (2017)

Add to Collection

Article Chemistry, Physical

Instrumented cardiac microphysiological devices via multimaterial three-dimensional printing

Johan U. Lind et al.

NATURE MATERIALS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Comparison of the Structural Characteristics of Cellulolytic Enzyme Lignin Preparations Isolated from Wheat Straw Stem and Leaf

Bo Jiang et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2017)

Add to Collection

Editorial Material Chemistry, Multidisciplinary

Lignin-first biomass fractionation: the advent of active stabilisation strategies

T. Renders et al.

ENERGY & ENVIRONMENTAL SCIENCE (2017)

Add to Collection

Article Chemistry, Multidisciplinary

On the structure of softwood kraft lignin

Claudia Crestini et al.

GREEN CHEMISTRY (2017)

Add to Collection

Article Pharmacology & Pharmacy

Selective laser sintering (SLS) 3D printing of medicines

Fabrizio Fina et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)

Add to Collection

Review Materials Science, Multidisciplinary

3D Printing of Polymer Nanocomposites via Stereolithography

Jill Z. Manapat et al.

MACROMOLECULAR MATERIALS AND ENGINEERING (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Anisotropic mechanical performance of 3D printed fiber reinforced sustainable construction material

Biranchi Panda et al.

MATERIALS LETTERS (2017)

Add to Collection

Review Chemistry, Multidisciplinary

3D printed functional nanomaterials for electrochemical energy storage

Cheng Zhu et al.

NANO TODAY (2017)

Add to Collection

Article Chemistry, Physical

3D printed reversible shape changing soft actuators assisted by liquid crystal elastomers

Chao Yuan et al.

SOFT MATTER (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Structural Characteristics of Lignin Macromolecules from Different Eucalyptus Species

Han-Min Wang et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Chemoselective Methylation of Phenolic Hydroxyl Group Prevents Quinone Methide Formation and Repolymerization During Lignin Depolymerization

Kwang Ho Kim et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Heat Treatment of Industrial Alkaline Lignin and its Potential Application as an Adhesive for Green Wood-Lignin Composites

Yun Zhang et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2017)

Add to Collection

Article Chemistry, Multidisciplinary

3D-Printed All-Fiber Li-Ion Battery toward Wearable Energy Storage

Yibo Wang et al.

ADVANCED FUNCTIONAL MATERIALS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Hybrid 3D Printing of Soft Electronics

Alexander D. Valentine et al.

ADVANCED MATERIALS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Laser-Induced Graphene Formation on Wood

Ruquan Ye et al.

ADVANCED MATERIALS (2017)

Add to Collection

Review Chemistry, Multidisciplinary

Polymers for 3D Printing and Customized Additive Manufacturing

Samuel Clark Ligon et al.

CHEMICAL REVIEWS (2017)

Add to Collection

Article Engineering, Manufacturing

Rate limits of additive manufacturing by fused filament fabrication and guidelines for high-throughput system design

Jamison Go et al.

ADDITIVE MANUFACTURING (2017)

Add to Collection

Article Chemistry, Multidisciplinary

3D-Printed Transparent Glass

Du T. Nguyen et al.

ADVANCED MATERIALS (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Three-dimensional Printing of Silver Microarchitectures Using Newtonian Nanoparticle Inks

Sanghyeon Lee et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Article Chemistry, Applied

Lignin-coated cellulose nanocrystal filled methacrylate composites prepared via 3D stereolithography printing: Mechanical reinforcement and thermal stabilization

Xinhao Feng et al.

CARBOHYDRATE POLYMERS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Cellulose Nanocrystal Inks for 3D Printing of Textured Cellular Architectures

Gilberto Siqueira et al.

ADVANCED FUNCTIONAL MATERIALS (2017)

Add to Collection

Review Engineering, Multidisciplinary

3D printing of polymer matrix composites: A review and prospective

Xin Wang et al.

COMPOSITES PART B-ENGINEERING (2017)

Add to Collection

Review Chemistry, Multidisciplinary

Strategies for the Conversion of Lignin to High-Value Polymeric Materials: Review and Perspective

Brianna M. Upton et al.

CHEMICAL REVIEWS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Three-Dimensional Printing of Highly Conductive Carbon Nanotube Microarchitectures with Fluid Ink

Jung Hyun Kim et al.

ACS NANO (2016)

Add to Collection

Article Chemistry, Multidisciplinary

A New Class of Renewable Thermoplastics with Extraordinary Performance from Nanostructured Lignin-Elastomers

Chau D. Tran et al.

ADVANCED FUNCTIONAL MATERIALS (2016)

Add to Collection

Article Agricultural Engineering

Comparison of the substrate enzymatic digestibility and lignin structure of wheat straw stems and leaves pretreated by green liquor

Bo Jiang et al.

BIORESOURCE TECHNOLOGY (2016)

Add to Collection

Article Chemistry, Physical

Processing and characterization of low-cost electrospun carbon fibers from organosolv lignin/polyacrylonitrile blends

Rui Ding et al.

CARBON (2016)

Add to Collection

Article Chemistry, Multidisciplinary

From lignin association to nano-/micro-particle preparation: extracting higher value of lignin

Wenwen Zhao et al.

GREEN CHEMISTRY (2016)

Add to Collection

Article Chemistry, Multidisciplinary

An approach towards tailoring interfacial structures and properties of multiphase renewable thermoplastics from lignin-nitrile rubber

Tony Bova et al.

GREEN CHEMISTRY (2016)

Add to Collection

Article Chemistry, Multidisciplinary

A study of poplar organosolv lignin after melt rheology treatment as carbon fiber precursors

Qining Sun et al.

GREEN CHEMISTRY (2016)

Add to Collection

Article Materials Science, Ceramics

Robocasting of structural ceramic parts with hydrogel inks

Ezra Feilden et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2016)

Add to Collection

Article Polymer Science

Softwood Lignin-Based Methacrylate Polymers with Tunable Thermal and Viscoelastic Properties

Angela L. Holmberg et al.

MACROMOLECULES (2016)

Add to Collection

Article Chemistry, Physical

Biomimetic 4D printing

A. Sydney Gladman et al.

NATURE MATERIALS (2016)

Add to Collection

Article Physics, Multidisciplinary

Lightweight Mechanical Metamaterials with Tunable Negative Thermal Expansion

Qiming Wang et al.

PHYSICAL REVIEW LETTERS (2016)

Add to Collection

Article Polymer Science

Syringyl Methacrylate, a Hardwood Lignin-Based Monomer for High-Tg Polymeric Materials

Angela L. Holmberg et al.

ACS MACRO LETTERS (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Polymer Dielectrics for 3D-Printed RF Devices in the Ka Band

Michael Lis et al.

ADVANCED MATERIALS TECHNOLOGIES (2016)

Add to Collection

Article Agricultural Engineering

Influence of lignin addition on the enzymatic digestibility of pretreated lignocellulosic biomasses

Wangxia Wang et al.

BIORESOURCE TECHNOLOGY (2015)

Add to Collection

Review Chemistry, Multidisciplinary

Sustainable carbon materials

Maria-Magdalena Titirici et al.

CHEMICAL SOCIETY REVIEWS (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Adipic acid production from lignin

Derek R. Vardon et al.

ENERGY & ENVIRONMENTAL SCIENCE (2015)

Add to Collection

Article Engineering, Chemical

Use of Microfibrillated Cellulose/Lignosulfonate Blends as Carbon Precursors: Impact of Hydrogel Rheology on 3D Printing

Ying Shao et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Influence of Poly(ethylene oxide) (PEO) Percent and Lignin Type on the Properties of Lignin/PEO Blend Filament

Qiaozhen Yu et al.

MACROMOLECULAR MATERIALS AND ENGINEERING (2015)

Add to Collection

Article Polymer Science

Exploring the benefits of β-allyl sulfones for more homogeneous dimethacrylate photopolymer networks

Christian Gorsche et al.

POLYMER CHEMISTRY (2015)

Add to Collection

Article Multidisciplinary Sciences

Highly compressible 3D periodic graphene aerogel microlattices

Cheng Zhu et al.

NATURE COMMUNICATIONS (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Poly(ethylene oxide)-Assisted Macromolecular Self-Assembly of Lignin in ABS Matrix for Sustainable Composite Applications

Kokouvi Akato et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2015)

Add to Collection

Article Nanoscience & Nanotechnology

3D-printed microelectronics for integrated circuitry and passive wireless sensors

Sung-Yueh Wu et al.

MICROSYSTEMS & NANOENGINEERING (2015)

Add to Collection

Article Engineering, Manufacturing

Optimization of fused deposition modeling process parameters: a review of current research and future prospects

Omar A. Mohamed et al.

ADVANCES IN MANUFACTURING (2015)

Add to Collection

Article Chemistry, Multidisciplinary

3D Printing of Reduced Graphene Oxide Nanowires

Jung Hyun Kim et al.

ADVANCED MATERIALS (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Embedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers

Joseph T. Muth et al.

ADVANCED MATERIALS (2014)

Add to Collection

Article Chemistry, Multidisciplinary

3D-Printing of Lightweight Cellular Composites

Brett G. Compton et al.

ADVANCED MATERIALS (2014)

Add to Collection

Review Chemistry, Multidisciplinary

Upgrading of lignin-derived bio-oils by catalytic hydrodeoxygenation

Majid Saidi et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Add to Collection

Article Materials Science, Multidisciplinary

The rheological behaviour of concentrated dispersions of graphene oxide

Cristina Valles et al.

JOURNAL OF MATERIALS SCIENCE (2014)

Add to Collection

Review Mechanics

Yield stress fluid flows: A review of experimental data

P. Coussot

JOURNAL OF NON-NEWTONIAN FLUID MECHANICS (2014)

Add to Collection

Article Engineering, Mechanical

Selective laser sintering of Mo-CuNi composite to be used as EDM electrode

Fred L. Amorim et al.

RAPID PROTOTYPING JOURNAL (2014)

Add to Collection

Review Polymer Science

Chemical modification of lignins: Towards biobased polymers

Stephanie Laurichesse et al.

PROGRESS IN POLYMER SCIENCE (2014)

Add to Collection

Review Multidisciplinary Sciences

Lignin Valorization: Improving Lignin Processing in the Biorefinery

Arthur J. Ragauskas et al.

SCIENCE (2014)

Add to Collection

Article Chemistry, Multidisciplinary

3D Printing of Interdigitated Li-Ion Microbattery Architectures

Ke Sun et al.

ADVANCED MATERIALS (2013)

Add to Collection

Article Agricultural Engineering

Effects of green liquor pretreatment on the chemical composition and enzymatic digestibility of rice straw

Feng Gu et al.

BIORESOURCE TECHNOLOGY (2013)

Add to Collection

Article Chemistry, Multidisciplinary

Lignin depolymerization (LDP) in alcohol over nickel-based catalysts via a fragmentation-hydrogenolysis process

Qi Song et al.

ENERGY & ENVIRONMENTAL SCIENCE (2013)

Add to Collection

Article Engineering, Chemical

Extraction of Hemicellulose from Loblolly Pine Woodchips and Subsequent Kraft Pulping

Fang Huang et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2013)

Add to Collection

Article Agricultural Engineering

Hydrothermal pretreatment and enzymatic saccharification of corn stover for efficient ethanol production

Badal C. Saha et al.

INDUSTRIAL CROPS AND PRODUCTS (2013)

Add to Collection

Article Agronomy

Biomass properties from different Miscanthus species

Chenchen Liu et al.

FOOD AND ENERGY SECURITY (2013)

Add to Collection

Article Agriculture, Multidisciplinary

Structural Characterization of Wheat Straw Lignin as Revealed by Analytical Pyrolysis, 2D-NMR, and Reductive Cleavage Methods

Jose C. del Rio et al.

JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY (2012)

Add to Collection

Review Biochemistry & Molecular Biology

Deciphering the Enigma of Lignification: Precursor Transport, Oxidation, and the Topochemistry of Lignin Assembly

Chang-Jun Liu

MOLECULAR PLANT (2012)

Add to Collection

Review Multidisciplinary Sciences

Valorization of Biomass: Deriving More Value from Waste

Christopher O. Tuck et al.

SCIENCE (2012)

Add to Collection

Article Chemistry, Multidisciplinary

Three-Dimensional Writing of Conducting Polymer Nanowire Arrays by Meniscus-Guided Polymerization

Ji Tae Kim et al.

ADVANCED MATERIALS (2011)

Add to Collection

Review Biotechnology & Applied Microbiology

Poplar as a feedstock for biofuels: A review of compositional characteristics

Poulomi Sannigrahi et al.

BIOFUELS BIOPRODUCTS & BIOREFINING-BIOFPR (2010)

Add to Collection

Review Engineering, Biomedical

A review on stereolithography and its applications in biomedical engineering

Ferry P. W. Melchels et al.

BIOMATERIALS (2010)

Add to Collection

Review Chemistry, Multidisciplinary

Switchgrass as an energy crop for biofuel production: A review of its ligno-cellulosic chemical properties

Kasi David et al.

ENERGY & ENVIRONMENTAL SCIENCE (2010)

Add to Collection

Article Chemistry, Multidisciplinary

Cellulose nanowhisker aerogels

Lindy Heath et al.

GREEN CHEMISTRY (2010)

Add to Collection

Review Chemistry, Multidisciplinary

Graphene Oxide, Highly Reduced Graphene Oxide, and Graphene: Versatile Building Blocks for Carbon-Based Materials

Owen C. Compton et al.

SMALL (2010)

Add to Collection

Review Chemistry, Multidisciplinary

Carbon-based materials as supercapacitor electrodes

Li Li Zhang et al.

CHEMICAL SOCIETY REVIEWS (2009)

Add to Collection

Article Multidisciplinary Sciences

Omnidirectional Printing of Flexible, Stretchable, and Spanning Silver Microelectrodes

Bok Y. Ahn et al.

SCIENCE (2009)

Add to Collection

Article Agricultural Engineering

Physico-chemical characterization of lignins from different sources for use in phenol-formaldehyde resin synthesis

A. Tejado et al.

BIORESOURCE TECHNOLOGY (2007)

Add to Collection

Article Nanoscience & Nanotechnology

A study of the impact of short-term ageing on the mechanical properties of a stereolithography resin

S. Mansour et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)

Add to Collection

Article Materials Science, Ceramics

Direct ink writing of three-dimensional ceramic structures

Jennifer A. Lewis et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2006)

Add to Collection

Article Automation & Control Systems

Building porous biopolymeric microstructures for controlled drug delivery devices using selective laser sintering

K. F. Leong et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2006)

Add to Collection

Article Chemistry, Multidisciplinary

Direct ink writing of 3D functional materials

Jennifer A. Lewis

ADVANCED FUNCTIONAL MATERIALS (2006)

Add to Collection

Review Multidisciplinary Sciences

The path forward for biofuels and biomaterials

AJ Ragauskas et al.

SCIENCE (2006)

Add to Collection

Article Materials Science, Multidisciplinary

Diffusion-limited photopolymerization in scanning micro-stereolithography

N Fang et al.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2004)

Add to Collection

Review Plant Sciences

Lignin biosynthesis

W Boerjan et al.

ANNUAL REVIEW OF PLANT BIOLOGY (2003)

Add to Collection

Article Automation & Control Systems

Lasers and materials in selective laser sintering

JP Kruth et al.

ASSEMBLY AUTOMATION (2003)

Add to Collection

Article Forestry

Erythro/threo ratio of beta-O-4 structures as an important structural characteristic of lignin. I: Improvement of ozonation method for the quantitative analysis of lignin side-chain structure

T Akiyama et al.

JOURNAL OF WOOD SCIENCE (2002)

Add to Collection

Article Biochemistry & Molecular Biology

Lignification and lignin topochemistry - an ultrastructural view

LA Donaldson

PHYTOCHEMISTRY (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.