☆ 4.8 Article

Conformal Imidazolium 1D Perovskite Capping Layer Stabilized 3D Perovskite Films for Efficient Solar Modules

ADVANCED SCIENCE (2022)

Related references

Note: Only part of the references are listed.

Review Chemistry, Multidisciplinary

Development of encapsulation strategies towards the commercialization of perovskite solar cells

Sai Ma et al.

Summary: Despite significant progress in the efficiency of perovskite solar cells, their commercialization has been hindered by the lack of stability. Encapsulation is crucial in providing protection against outdoor aging stressors and improving device stability.

ENERGY & ENVIRONMENTAL SCIENCE (2022)

Add to Collection

Article Multidisciplinary Sciences

Metastable Dion-Jacobson 2D structure enables efficient and stable perovskite solar cells

Fei Zhang et al.

Summary: The performance of 3D perovskite solar cells can be improved by treating the surface with 2D layered perovskites that have efficient charge transport. Adjusting the arrangement of organic molecules enhances hole transport and power conversion efficiency. The use of a stable 2D surface layer also improves the performance and stability of 3D perovskite solar cells.

SCIENCE (2022)

Add to Collection

Article Energy & Fuels

Scalable Preparation of High-Performance ZnO-SnO2 Cascaded Electron Transport Layer for Efficient Perovskite Solar Modules

Ruiqin He et al.

Summary: Perovskite solar cells have seen rapid growth in recent years, but their commercialization is limited by stability, low cost, and high-quality preparation of large-area modules. This study introduces a scalable and high-performance ZnO-SnO2 cascade double-layer electron transport layer for efficient and stable perovskite modules. By combining spray pyrolysis coating with the blade coating process, the interface stability is improved while providing a smoother surface for perovskite crystallization, leading to impressive efficiencies and excellent reproducibility in large-area planar perovskite modules. The developed ETL and deposition method hold promise for industrial scalable perovskite module fabrication.

SOLAR RRL (2022)

Add to Collection

Review Energy & Fuels

Toward Commercialization of Efficient and Stable Perovskite Solar Modules

Chenquan Yang et al.

Summary: The commercialization of perovskite photovoltaic technology relies on the development of high-efficiency, stable, and large-area solar modules. Despite advancements in laboratory-scale perovskite solar cells, there are still challenges in scaling up to large-area perovskite solar modules. This review discusses recent progress in scaling-up PSMs, including preparation methods, electrode materials, device structure design, and strategies for improving environmental stability.

SOLAR RRL (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Crown Ether-Assisted Growth and Scaling Up of FACsPbI3 Films for Efficient and Stable Perovskite Solar Modules

Ruihao Chen et al.

Summary: Efficient and stable perovskite solar cell (PSC) modules have been successfully fabricated by employing crown ether to facilitate the large-scale synthesis of high-quality perovskite films with novel interaction between crown ether and metal cations.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Energy & Fuels

Intact 2D/3D halide junction perovskite solar cells via solid-phase in-plane growth

Yeoun-Woo Jang et al.

Summary: Researchers have developed a solid-phase method to grow phase-pure two-dimensional perovskites in perovskite solar cells, enhancing device efficiency and stability. By growing a stable two-dimensional film on top of a three-dimensional film using a solvent-free method, an intact 2D/3D heterojunction is formed, resulting in high photovoltage in the device.

NATURE ENERGY (2021)

Add to Collection

Article Chemistry, Physical

D-A-π-A-D-type Dopant-free Hole Transport Material for Low-Cost, Efficient, and Stable Perovskite Solar Cells

Tianqi Niu et al.

Summary: The development of low-cost and efficient hole transport materials (HTMs) is crucial for commercialization of perovskite solar cells (PSCs). DTB-FL with a D-A-pi-A-D molecular design shows promise in achieving high efficiencies and stability in PSCs, as it features excellent optoelectronic properties and efficient surface passivation effects.

JOULE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Capturing Mobile Lithium Ions in a Molecular Hole Transporter Enhances the Thermal Stability of Perovskite Solar Cells

Seul-Gi Kim et al.

Summary: A thermally stable perovskite solar cell using a new molecular hole transporter HL38 demonstrates improved power conversion efficiency when incorporating 2-(2-aminoethyl)thiophene hydroiodide for interface engineering. The study shows that HL38 exhibits higher thermal stability and lower lithium ion diffusivity compared to spiro-MeOTAD, highlighting the importance of capturing mobile Li+ in novel molecular hole transporters for enhancing PSC performance.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Grain Boundary Engineering with Self-Assembled Porphyrin Supramolecules for Highly Efficient Large-Area Perovskite Photovoltaics

Zihan Fang et al.

Summary: Grain boundary management is crucial for the performance of polycrystalline perovskite solar cells, and a designed supramolecular binder can simultaneously passivate defects and promote carrier transport, leading to improved efficiency and stability. The NiP-doped PSCs achieved a certified efficiency of 22.1% and retained over 80% initial performance after continuous illumination or heating for 3000 hours at 85 degrees C.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

Add to Collection

Article Multidisciplinary Sciences

Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes

Hanul Min et al.

Summary: By introducing an interlayer between the electron-transporting and perovskite layers in perovskite solar cells, researchers have successfully enhanced charge extraction and transport from the perovskite, leading to higher power conversion efficiency and fewer interfacial defects. The coherent interlayer allowed the fabrication of devices with a certified efficiency of 25.5%, which maintained about 90% of its initial efficiency even after continuous light exposure for 500 hours. The findings provide guidelines for designing defect-minimizing interfaces in metal halide perovskites and electron-transporting layers.

NATURE (2021)

Add to Collection

Article Multidisciplinary Sciences

Distribution control enables efficient reduced-dimensional perovskite LEDs

Dongxin Ma et al.

Summary: By using a fluorinated triphenylphosphine oxide additive to control cation diffusion and passivate surfaces, the efficiency and operating lifetimes of perovskite light-emitting diodes have been improved. Although reduced-dimensional perovskites show promise in increasing stability and photoluminescence quantum yield, challenges such as lower EQEs and inferior color purities remain.

NATURE (2021)

Add to Collection

Review Chemistry, Physical

Encapsulation of perovskite solar cells for enhanced stability: Structures, materials and characterization

Jiale Li et al.

Summary: Perovskite solar cells have achieved a certified efficiency of 25.5% within a decade, but the long-term device stability remains a significant challenge. Encapsulation technique is employed to enhance stability under ambient conditions, and modifications are needed due to the unique properties of PSCs. This review covers optimizing architecture, materials, and manufacturing process for PSCs encapsulation, demonstrating significant improvements in stability and proposing suggestions for future commercialization.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Article Multidisciplinary Sciences

Efficient perovskite solar cells via improved carrier management

Jason J. Yoo et al.

Summary: Metal halide perovskite solar cells have shown great potential to disrupt the silicon solar cell market with their improved performance, yet still face limitations in light-harvesting due to charge carrier recombination. Efforts to enhance charge carrier management offer a path to increase device performance and approach the theoretical efficiency limit of PSCs.

NATURE (2021)

Add to Collection

Article Multidisciplinary Sciences

Liquid-phase sintering of lead halide perovskites and metal-organic framework glasses

Jingwei Hou et al.

Summary: By utilizing metal-organic framework glasses, a family of scalable composites was created to stabilize lead halide perovskite's nonequilibrium phases, resulting in bright photoluminescence and high stability.

SCIENCE (2021)

Add to Collection

Article Chemistry, Physical

Selective Defect Passivation and Topographical Control of 4-Dimethylaminopyridine at Grain Boundary for Efficient and Stable Planar Perovskite Solar Cells

Seulki Song et al.

Summary: The introduction of DMAP in perovskite solar cells has been shown to improve device efficiency and stability by modifying grain boundaries and enhancing adhesion strength between materials.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Organic Ammonium Halide Modulators as Effective Strategy for Enhanced Perovskite Photovoltaic Performance

Seckin Akin et al.

Summary: This review summarizes the recent advances in improving the photovoltaic performance of PSCs by using ammonium halide-based molecular modulators, focusing on the challenges associated with hygroscopicity and ion migration, the roles of ammonium-based passivation agents on overlayers, and future prospects for application.

ADVANCED SCIENCE (2021)

Add to Collection

Article Multidisciplinary Sciences

Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells

Jaeki Jeong et al.

Summary: The research introduces a new concept of using formate anion to suppress defects in metal halide perovskite films and enhance film crystallinity, leading to improved efficiency and stability of solar cells.

NATURE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Synergistic Effects of Eu-MOF on Perovskite Solar Cells with Improved Stability

Jie Dou et al.

Summary: The introduction of an ultrathin Eu-MOF layer in perovskite solar cells has been shown to enhance device stability and light utilization by reducing defect concentration, improving carrier transport, and utilizing the Forster resonance energy transfer effect. This leads to a champion power conversion efficiency of 22.16% and excellent device stability, with 96% of original PCE retained after 2000 hours under 30% relative humidity and 91% retained after 1200 hours at 85 degrees C in N-2 environment.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Interfacial Embedding of Laser-Manufactured Fluorinated Gold Clusters Enabling Stable Perovskite Solar Cells with Efficiency Over 24%

Pengfei Guo et al.

Summary: This study presents a strategy of interfacial embedding hydrophobic fluorinated-gold-clusters (FGCs) to achieve highly efficient and stable PSCs, improving carrier dynamics and enhancing environmental stability.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Marked Passivation Effect of Naphthalene-1,8-Dicarboximides in High-Performance Perovskite Solar Cells

Zhihao Zhang et al.

Summary: This study uses two structurally similar polyaromatic molecules to improve the lifetime and efficiency of perovskite solar cells, successfully designing a more effective passivator and achieving higher device efficiency.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Sulfonate-Assisted Surface Iodide Management for High-Performance Perovskite Solar Cells and Modules

Ruihao Chen et al.

Summary: Surface iodide management using cesium sulfonate can stabilize lead halide perovskite surfaces, reduce surface defects and nonradiative recombination, and improve the efficiency and stability of perovskite solar cells.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

Add to Collection

Article Multidisciplinary Sciences

Lead halide-templated crystallization of methylamine-free perovskite for efficient photovoltaic modules

Tongle Bu et al.

Summary: Efficient and stable perovskite layers are crucial for the commercialization of perovskite solar cells. A lead halide-templated crystallization strategy has been developed to print formamidinium-cesium lead triiodide perovskite films, achieving high-quality large-area films with controlled nucleation and growth. An unencapsulated device with 23% efficiency and excellent long-term thermal stability has been achieved, showcasing the potential for practical application in the future.

SCIENCE (2021)

Add to Collection

Article Energy & Fuels

Defect compensation in formamidinium-caesium perovskites for highly efficient solar mini-modules with improved photostability

Yehao Deng et al.

Summary: The addition of excessive AX in formamidinium-caesium mixed-cation perovskites improves their photostability by compensating iodide vacancies and suppressing ion migration and defects generation during long-term illumination. This approach impedes the generation of hole traps and phase segregation, ultimately enhancing the stability and efficiency of the perovskite mini-modules.

NATURE ENERGY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

High-throughput large-area vacuum deposition for high-performance formamidine-based perovskite solar cells

Jiangshan Feng et al.

Summary: An efficient vacuum deposition approach for perovskite solar cells has been developed, enabling the fabrication of high-quality films on glass and flexible substrates. The optimization of in-vacuum annealing temperature can significantly improve the efficiency of PSCs to 21.32%, the highest value achieved through vacuum deposition, with excellent long-term stability in a solvent-free and air-free environment.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Add to Collection

Review Chemistry, Physical

Progress of Surface Science Studies on ABX3-Based Metal Halide Perovskite Solar Cells

Longbin Qiu et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Review Chemistry, Physical

Research Direction toward Scalable, Stable, and High Efficiency Perovskite Solar Cells

Nam-Gyu Park

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Review Chemistry, Physical

New Strategies for Defect Passivation in High-Efficiency Perovskite Solar Cells

Seckin Akin et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Energy & Fuels

Managing grains and interfaces via ligand anchoring enables 22.3%-efficiency inverted perovskite solar cells

Xiaopeng Zheng et al.

NATURE ENERGY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

FAPbI3-Based Perovskite Solar Cells Employing Hexyl-Based Ionic Liquid with an Efficiency Over 20% and Excellent Long-Term Stability

Seckin Akin et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Multidisciplinary Sciences

Gas chromatography-mass spectrometry analyses of encapsulated stable perovskite solar cells

Lei Shi et al.

SCIENCE (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Methylamine-Dimer-Induced Phase Transition toward MAPbI3 Films and High-Efficiency Perovskite Solar Modules

Xiaofeng Huang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Promoting Thermodynamic and Kinetic Stabilities of FA-based Perovskite by an in Situ Bilayer Structure

Alex Fan Xu et al.

NANO LETTERS (2020)

Add to Collection

Article Energy & Fuels

A holistic approach to interface stabilization for efficient perovskite solar modules with over 2,000-hour operational stability

Zonghao Liu et al.

NATURE ENERGY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Superior Carrier Lifetimes Exceeding 6 μs in Polycrystalline Halide Perovskites

Xiaoyu Yang et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Multidisciplinary Sciences

A piperidinium salt stabilizes efficient metal-halide perovskite solar cells

Yen-Hung Lin et al.

SCIENCE (2020)

Add to Collection

Article Multidisciplinary Sciences

Impact of strain relaxation on performance of α-formamidinium lead iodide perovskite solar cells

Gwisu Kim et al.

SCIENCE (2020)

Add to Collection

Article Chemistry, Multidisciplinary

An in situ cross-linked 1D/3D perovskite heterostructure improves the stability of hybrid perovskite solar cells for over 3000 h operation

Ning Yang et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Add to Collection

Article Chemistry, Physical

Moisture-tolerant and high-quality α-CsPbI3 films for efficient and stable perovskite solar modules

Ruihao Chen et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Multidisciplinary Sciences

Efficient, stable and scalable perovskite solar cells using poly(3-hexylthiophene)

Eui Hyuk Jung et al.

NATURE (2019)

Add to Collection

Article Optics

Surface passivation of perovskite film for efficient solar cells

Qi Jiang et al.

NATURE PHOTONICS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Achieving Long-Term Operational Stability of Perovskite Solar Cells with a Stabilized Efficiency Exceeding 20% after 1000 h

Tae-Youl Yang et al.

ADVANCED SCIENCE (2019)

Add to Collection

Article Multidisciplinary Sciences

Atomic-level passivation mechanism of ammonium salts enabling highly efficient perovskite solar cells

Essa A. Alharbi et al.

NATURE COMMUNICATIONS (2019)

Add to Collection

Article Chemistry, Physical

Improved Environmental Stability and Solar Cell Efficiency of (MA,FA)PbI3 Perovskite Using a Wide-Band-Gap 1D Thiazolium Lead Iodide Capping Layer Strategy

Lili Gao et al.

ACS ENERGY LETTERS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Interfacial Engineering at the 2D/3D Heterojunction for High-Performance Perovskite Solar Cells

Tianqi Niu et al.

NANO LETTERS (2019)

Add to Collection

Article Chemistry, Physical

Optimal Interfacial Engineering with Different Length of Alkylammonium Halide for Efficient and Stable Perovskite Solar Cells

Hyeonwoo Kim et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

High-Efficiency, Hysteresis-Less, UV-Stable Perovskite Solar Cells with Cascade ZnO-ZnS Electron Transport Layer

Ruihao Chen et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Efficient and Stable Low-Bandgap Perovskite Solar Cells Enabled by a CsPbBr3-Cluster Assisted Bottom-up Crystallization Approach

Liqiang Xie et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

Add to Collection

Article Multidisciplinary Sciences

Constructive molecular configurations for surface-defect passivation of perovskite photovoltaics

Rui Wang et al.

SCIENCE (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Controllable CsxFA1-xPbI3 Single-Crystal Morphology via Rationally Regulating the Diffusion and Collision of Micelles toward High-Performance Photon Detectors

Huamin Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Editorial Material Chemistry, Physical

Perovskite Solar Cell: Research Direction for Next 10 Years

Nam-Gyu Park

ACS ENERGY LETTERS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

An interface stabilized perovskite solar cell with high stabilized efficiency and low voltage loss

Jason J. Yoo et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

Add to Collection

Article Chemistry, Physical

Efficient Perovskite Solar Cell Modules with High Stability Enabled by Iodide Diffusion Barriers

Enbing Bi et al.

JOULE (2019)

Add to Collection

Article Chemistry, Multidisciplinary

In Situ Growth of 2D Perovskite Capping Layer for Stable and Efficient Perovskite Solar Cells

Peng Chen et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Simultaneous Improvement of Photovoltaic Performance and Stability by In Situ Formation of 2D Perovskite at (FAPbI(3))(0.88)(CsPbBr3)(0.12)/CuSCN Interface

Jiangzhao Chen et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Energy & Fuels

Suppression of atomic vacancies via incorporation of isovalent small ions to increase the stability of halide perovskite solar cells in ambient air

Makhsud I. Saidaminov et al.

NATURE ENERGY (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Functional Scanning Force Microscopy for Energy Nanodevices

Xi Chen et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Multidisciplinary Sciences

Perovskite light-emitting diodes with external quantum efficiency exceeding 20 per cent

Kebin Lin et al.

NATURE (2018)

Add to Collection

Article Chemistry, Multidisciplinary

All-Vacuum-Deposited Stoichiometrically Balanced Inorganic Cesium Lead Halide Perovskite Solar Cells with Stabilized Efficiency Exceeding 11%

Chien-Yu Chen et al.

ADVANCED MATERIALS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Thermal degradation of CH3NH3PbI3 perovskite into NH3 and CH3I gases observed by coupled thermogravimetry-mass spectrometry analysis

Emilio J. Juarez-Perez et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

Add to Collection

Review Chemistry, Multidisciplinary

Organometal halide perovskite solar cells: degradation and stability

Taame Abraha Berhe et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Ligand-Stabilized Reduced-Dimensionality Perovskites

Li Na Quan et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)

Add to Collection

Article Multidisciplinary Sciences

Low trap-state density and long carrier diffusion in organolead trihalide perovskite single crystals

Dong Shi et al.

SCIENCE (2015)

Add to Collection

Article Chemistry, Multidisciplinary

SHELXT - Integrated space-group and crystal-structure determination

George M. Sheldrick

ACTA CRYSTALLOGRAPHICA A-FOUNDATION AND ADVANCES (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Crystal structure refinement with SHELXL

George M. Sheldrick

ACTA CRYSTALLOGRAPHICA SECTION C-STRUCTURAL CHEMISTRY (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Efficient and Uniform Planar-Type Perovskite Solar Cells by Simple Sequential Vacuum Deposition

Chang-Wen Chen et al.

ADVANCED MATERIALS (2014)

Add to Collection

Article Chemistry, Multidisciplinary

ShelXle: a Qt graphical user interface for SHELXL

Christian B. Huebschle et al.

JOURNAL OF APPLIED CRYSTALLOGRAPHY (2011)

Add to Collection

Software Review Chemistry, Multidisciplinary

OLEX2: a complete structure solution, refinement and analysis program

Oleg V. Dolomanov et al.

JOURNAL OF APPLIED CRYSTALLOGRAPHY (2009)

Add to Collection

© Peeref 2019-2024. All rights reserved.