☆ 4.7 Review

All-Inorganic Perovskite Quantum Dot-Based Blue Light-Emitting Diodes: Recent Advances and Strategies

NANOMATERIALS (2022)

Related references

Note: Only part of the references are listed.
Article Chemistry, Multidisciplinary

Negligible Ion Migration in Tin-Based and Tin-Doped Perovskites

Kester O. Ighodalo et al.

Summary: This study reveals that ion migration and phase segregation are not observed in tin halide perovskites unlike lead halide perovskites. The stronger Sn-halide bond and higher ion migration activation energy in tin halide perovskites contribute to the absence of ion migration under illumination. The threshold activation energy for the absence of ion migration is determined to be around 0.65 eV.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2023)

Add to Collection
Article Nanoscience & Nanotechnology

Efficient Pure Blue Light-Emitting Diodes Based on CsPbBr3 Quantum-Confined Nanoplates

Wei Shen et al.

Summary: This study demonstrates the improvement of stability and efficiency in high-performance blue perovskite LEDs through four-aminobenzenesulfonic acid (SA) compensation and suitable MABr treatment. The coverage and thickness of the NPL layer were improved using an alternate droplet/spin coating method to prevent hole transport layer emission and increase the reproducibility of LED performance and spectra. Moreover, hole transport layers were designed to improve energy-level alignment.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection
Article Engineering, Environmental

Ionic liquid assisted pure blue emission CsPbBr3 quantum dots with improved optical properties and alkyl chain regulated stability

Hao Luo et al.

Summary: The study successfully prepared high color purity blue-emitting CsPbBr3 QDs using hydrophobic ionic liquids, enhancing their photoluminescence quantum yields through passivation. QDs with longer alkyl chain ILs showed better stability, possibly due to the higher hydrophobicity of the alkyl chains. The ILs passivation strategy is an effective method for preparing blue-emitting perovskite QDs with high PLQYs and stability.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection
Article Chemistry, Physical

Suppression of Photoinduced Phase Segregation in Mixed-Halide Perovskite Nanocrystals for Stable Light-Emitting Diodes

Feixiang Xu et al.

Summary: A new strategy combining precursor and surface engineering has been developed to achieve improved red-light emission stability and suppression of halide segregation in mixed-halide perovskite nanocrystals.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2022)

Add to Collection
Article Nanoscience & Nanotechnology

Tuning optical properties of CsPbBr3 by mixing Nd3+ trivalent lanthanide halide cations for blue light emitting devices

Muhammad Amin Padhiar et al.

Summary: In this study, we successfully fabricated efficient blue-emitting devices by tuning the optical properties of CsPbBr3 and doping Nd3+ into perovskite quantum dots. The incorporation of Nd3+ efficiently reduced non-radiative recombination and significantly increased the photoluminescence quantum yield in the blue-emitting region. Furthermore, the Nd3+-doped PQDs exhibited excellent long-term stability against the external environment.

NANOTECHNOLOGY (2022)

Add to Collection
Article Chemistry, Physical

Color tunable emission from Eu3+ and Tm3+ co-doped CsPbBr3 quantum dot glass nanocomposites

Erdinc Erol et al.

Summary: Eu3+ and Tm3+ co-doped CsPbBr3 QD glass nanocomposites have been successfully synthesized to achieve tunable emission colors covering the entire visible spectrum. These nanocomposites exhibit high photoluminescence quantum yield and stability, making them potential light convertor materials for multi-color LED or warm white LED applications.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2022)

Add to Collection
Article Materials Science, Multidisciplinary

Suppression of halide migration and immobile ionic surface passivation for blue perovskite light-emitting diodes

Chan Beom Park et al.

Summary: Cs-based perovskite nanocrystals (PeNCs) are excellent emitters for perovskite light-emitting diodes (PeLEDs) due to their remarkable optoelectronic properties. In this study, a surface passivation strategy using potassium thiocyanate was proposed to improve the structure and optical properties of PeNCs. The strategy significantly enhanced the photoluminescence quantum yield and colloidal stability of PeNCs, leading to high efficiency and long lifetime PeLEDs.

JOURNAL OF MATERIALS CHEMISTRY C (2022)

Add to Collection
Article Nanoscience & Nanotechnology

Accelerating Energy Funnel and Charge Transport of Quasi-2D Perovskites for Efficient Sky Blue- and White-Light-Emitting Devices

Ye Yang et al.

Summary: Additive engineering using hypophosphorous acid (HPA) is an effective strategy to enhance the performance of perovskite light-emitting devices. HPA can passivate metallic Pb defects, enhance crystallinity, and increase the three-dimensional phase content in quasi-two-dimensional perovskites, resulting in improved luminescence efficiency and charge transport ability.

ACS PHOTONICS (2022)

Add to Collection
Article Chemistry, Multidisciplinary

Highly Emissive Blue Quantum Dots with Superior Thermal Stability via In Situ Surface Reconstruction of Mixed CsPbBr3-Cs4PbBr6 Nanocrystals

Hyeonjung Kim et al.

Summary: A novel strategy for highly efficient and stable cesium lead bromide (CsPbBr3) quantum dots (QDs) was reported, achieved by controlling the ratio of CsPbBr3 to Cs4PbBr6 nanocrystals (NCs) and removing surface defects. The defect-engineered QDs exhibited high colloidal stability and retained over 90% of their initial photoluminescence quantum yield (PLQY) after more than 120 days of ambient storage. Blue LEDs fabricated from CsPbBr3 QDs with reconstructed surfaces showed a maximum external quantum efficiency of 4.65% at 480 nm and excellent spectral stability.

ADVANCED SCIENCE (2022)

Add to Collection
Article Nanoscience & Nanotechnology

Stable CsPbX3 (Br/Cl) Perovskite Nanocrystal Layer Passivated with Al-Doped CdSe for Blue Light-Emitting Diodes

Muhammad Amin Padhiar et al.

Summary: Perovskite nanocrystals (PNCs) with adjustable emission bands and high photoluminescence are ideal for optical devices. This study introduces a simple strategy to enhance the stability of blue-light emitting PNCs, achieving highly stable PNCs with changes in bandgaps and PLQY values. The doped PNCs show potential for use as color converters in liquid crystal displays (LCDs) and demonstrate remarkable stability under various ambient conditions.

ACS APPLIED NANO MATERIALS (2022)

Add to Collection
Article Chemistry, Multidisciplinary

In Situ Inorganic Ligand Replenishment Enables Bandgap Stability in Mixed-Halide Perovskite Quantum Dot Solids

Ya-Kun Wang et al.

Summary: The issue of instability in mixed-halide perovskites (MHPs) has been addressed by introducing inorganic ligands, resulting in improved colloidal and photo-stability. The new materials exhibit high efficiency and narrow emission spectrum in light-emitting diodes (LEDs), with enhanced operating stability.

ADVANCED MATERIALS (2022)

Add to Collection
Article Optics

Enhanced photoluminescence efficiencies of CsPbCl3-xBrx nanocrystals by incorporating neodymium ions

Jiamin Xiong et al.

Summary: This study presents an effective strategy to enhance the photoluminescence quantum yield (PLQY) and stability of blue and violet perovskite nanocrystals (NCs) by incorporating Nd3+ ions. The results show that Nd3+ doping reduces defect states and improves the water stability of the NCs. Further post-treatment with anion exchange reaction leads to an extended emission range and significantly increased maximum PLQY.

JOURNAL OF LUMINESCENCE (2022)

Add to Collection
Article Optics

Stable and multicolor solid-state luminescence of Mn doped CsPb(Cl/Br)3 perovskite quantum dots and its application in light-emitting diodes

Kewei Ma et al.

Summary: Mn2+ doping in CsPbCl3 perovskite quantum dots affects their photoluminescence, with stable properties observed at certain doping concentrations. Anion exchange reactions between stable CsPb0.796Mn0.204Cl3 and CsPbBr3 PQDs result in a wide fluorescence color gamut for Mn:CsPb(Cl/Br)3 PQDs.

JOURNAL OF LUMINESCENCE (2022)

Add to Collection
Article Materials Science, Multidisciplinary

A Synergetic Codoping Strategy Enabling Performance Improvement of Pure-Blue Perovskite Quantum Dots Light-Emitting Diodes

Jiangyong Pan et al.

Summary: By codoping Mn2+ and Ni2+ in CsPb(Br1.8Cl1.2), the photoluminescence quantum yield (PLQY) and thermal stability of blue PeQDLEDs are improved, and the hole injection barrier is reduced, providing a new pathway for achieving efficient and stable pure blue PeQDLEDs.

ADVANCED OPTICAL MATERIALS (2022)

Add to Collection
Article Materials Science, Multidisciplinary

Electron Delocalization in CsPbI3 Quantum Dots Enables Efficient Light-Emitting Diodes with Improved Efficiency Roll-Off

Shixu Yang et al.

Summary: To address the issue of quantum dot charging during LED operation, researchers introduced PEA(+) as an electron attractor, which improved electron delocalization and charge transportation, leading to improved performance of quantum dot LEDs.

ADVANCED OPTICAL MATERIALS (2022)

Add to Collection
Article Chemistry, Physical

High brightness and stability pure-blue perovskite light-emitting diodes based on a novel structural quantum-dot film

Zhiwei Yao et al.

Summary: Researchers have developed a novel structure for perovskite quantum dot (QD) films to enhance the stability and brightness of pure-blue emission in perovskite light-emitting diodes (PeLEDs). By incorporating an ultrathin interlayer into the QD film, the charge recombination is effectively controlled, reducing exciton quenching and Auger recombination. The PeLEDs based on this structure exhibit stabilized pure-blue emission and high external quantum efficiency, maintaining high brightness even at high luminance.

NANO ENERGY (2022)

Add to Collection
Article Chemistry, Multidisciplinary

All-in-One Process for Color Tuning and Patterning of Perovskite Quantum Dot Light-Emitting Diodes

Junho Kim et al.

Summary: In this study, a novel all-in-one process for exchanging ligands and halide anions in film-state is proposed to achieve facile color tuning and patterning of PeQD LEDs. The performance of PeQD LEDs is significantly enhanced by passivating the PeQD with shorter ligands. The all-in-one process is more stable in the film state and facilitates rapid color change in localized areas, enabling the fabrication of fine patterns using simple contact masks.

ADVANCED SCIENCE (2022)

Add to Collection
Review Engineering, Electrical & Electronic

Perovskite light-emitting diodes

Azhar Fakharuddin et al.

Summary: Light-emitting diodes based on halide perovskites have achieved significant progress in recent years, with external quantum efficiencies surpassing 23%. However, their practical application is still limited due to factors such as low efficiency in blue-emitting devices, inability to access emission wavelengths above 800 nm, decreased external quantum efficiency at high current density, lack of understanding of the electric field's effect on mobile ions in perovskite materials, and short device lifetimes. This review explores the development of perovskite light-emitting diodes, examining the key challenges in creating efficient and stable devices.

NATURE ELECTRONICS (2022)

Add to Collection
Article Chemistry, Multidisciplinary

All Solution-Processed High Performance Pure-Blue Perovskite Quantum-Dot Light-Emitting Diodes

Aqiang Liu et al.

Summary: This study demonstrates highly efficient and stable pure-blue perovskite light-emitting diodes (PeLEDs) achieved through an all-solution process. By using difunctional zinc oxide (D-ZnO) nanocrystals, the damaged perovskite surface is repaired and balanced charge injection is achieved to improve the luminous efficiency. The fabricated PeLEDs showed pure-blue emission at a wavelength of 470 nm, with high luminance and external quantum efficiency, as well as a long continuous operation time.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection
Article Chemistry, Multidisciplinary

Enriched-Bromine Surface State for Stable Sky-Blue Spectrum Perovskite QLEDs With an EQE of 14.6%

Hanwen Zhu et al.

Summary: Enriched-bromine surface state is achieved through anion exchange with PbBr2 stock solution in Cd-doped perovskite quantum dots, leading to improved efficiency and stability of perovskite QLEDs.

ADVANCED MATERIALS (2022)

Add to Collection
Article Chemistry, Multidisciplinary

Blue Perovskite Nanocrystal Light-Emitting Diodes: Overcoming Ruddlesden-Popper Fault-Induced Nonradiative Recombination via Post-Halide Exchange

Ah-young Lee et al.

Summary: This study investigates the reasons behind the decrease in efficiency of blue-emitting perovskite nanocrystals after mixing halides, and finds that Ruddlesden-Popper faults can induce nonradiative recombination pathways. By introducing a halide exchange treatment, high-efficiency pure blue-emitting PNC LEDs are obtained.

SMALL (2022)

Add to Collection
Article Optics

Bi3+ and Eu3+ co-doped CsPbCl3 perovskite quantum dots with efficient controllable blue emission via energy transfer

Wenzhi Wang et al.

Summary: This study investigates the co-doping of different metal ions in halide perovskite quantum dots, resulting in the successful synthesis of low-lead content Cs(Pb1-xBix)Cl-3 and Cs(Pb(0.95-y)Bi(0.0)5Eu(y))Cl-3 perovskite quantum dots with cubic morphologies. The doping of metal ions does not alter the crystal structure but affects the particle size. Under UV excitation, the doped perovskite quantum dots exhibit their respective emission bands, and the emission color can be tuned by changing the content of the metal ions.

JOURNAL OF LUMINESCENCE (2022)

Add to Collection
Article Chemistry, Multidisciplinary

Anion-Exchange Blue Perovskite Quantum Dots for Efficient Light-Emitting Devices

Wei-Kuan Hung et al.

Summary: In this study, blue perovskite quantum dots were prepared using DDAB to passivate surface defects and improve film quality. The resulting device showed stable performance with high efficiency.

NANOMATERIALS (2022)

Add to Collection
Review Chemistry, Applied

Developments and challenges ahead in blue perovskite light-emitting devices

Lin Zhang et al.

Summary: Perovskite light-emitting diodes (PeLEDs) have rapidly developed in green, red, and near-infrared light emissions, but efficiency improvement in blue (especially deep-blue) PeLEDs still faces challenges.

JOURNAL OF ENERGY CHEMISTRY (2022)

Add to Collection
Review Crystallography

Challenges and Opportunities for the Blue Perovskite Quantum Dot Light-Emitting Diodes

Shuchen Weng et al.

Summary: This review explores the unique characteristics and potential solutions for the bottleneck issues of PQD-LEDs.

CRYSTALS (2022)

Add to Collection
Article Multidisciplinary Sciences

Controlling the nucleation and growth kinetics of lead halide perovskite quantum dots

Quinten A. Akkerman et al.

Summary: In this study, the authors report a room-temperature synthesis method for monodisperse, isolable, spheroidal APbBr3 QDs. By controlling the equilibrium between the precursor and the solute, as well as the kinetics of nucleation and growth, size tunable QDs were obtained.

SCIENCE (2022)

Add to Collection
Article Nanoscience & Nanotechnology

Highly efficient and blue-emitting CsPbBr3 quantum dots synthesized by two-step supersaturated recrystallization

Bowang Shu et al.

Summary: Efficient and blue-emitting CsPbBr3 quantum dots were successfully synthesized by two-step supersaturated recrystallization method, demonstrating outstanding optical properties with highest photoluminescence quantum yield of 87.20% and longest photoluminescence lifetime of 12.24 ns. The blue light-emitting diode made from these quantum dots exhibited CIE coordinate of (0.14, 0.10), in good agreement with the standard blue CIE coordinate (0.14, 0.08) of National Television System Committee (NTSC).

NANOTECHNOLOGY (2021)

Add to Collection
Article Multidisciplinary Sciences

Mixed halide perovskites for spectrally stable and high-efficiency blue light-emitting diodes

Max Karlsson et al.

Summary: Achieving bright and efficient blue emission in metal halide perovskite light-emitting diodes has been challenging, but the authors demonstrate high EQE and spectrally stable blue light-emitting diodes based on mixed halide perovskites, with emission from 490 to 451nm by using a vapour-assisted crystallization technique.

NATURE COMMUNICATIONS (2021)

Add to Collection
Article Materials Science, Multidisciplinary

Deep Blue Layered Lead Perovskite Light-Emitting Diode

Siyu Yan et al.

Summary: The two-dimensional layered lead perovskite with high deep blue photoluminescence quantum yield provides a route to fabricate stable and high-performance deep blue emission PeLEDs, surpassing previously reported devices in brightness and efficiency.

ADVANCED OPTICAL MATERIALS (2021)

Add to Collection
Article Chemistry, Multidisciplinary

Highly Stable and Spectrally Tunable Gamma Phase RbxCs1-xPbI3 Gradient-Alloyed Quantum Dots in PMMA Matrix through A Sites Engineering

Fei Li et al.

Summary: Perovskite quantum dots have emerged as new functional materials for display applications, with the issue of red wall obstruction being successfully addressed through the fabrication of alloyed quantum dots. The photoluminescence emission wavelength of the quantum dots can be tuned effectively, and they exhibit high quantum yields and good stability in aging tests. When integrated into LCD backlights, they achieve a color space of approximately 130% of the NTSC 1931 standard with a matching rate of 100%.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection
Article Chemistry, Multidisciplinary

Perovskite Quantum Dots with Ultralow Trap Density by Acid Etching-Driven Ligand Exchange for High Luminance and Stable Pure-Blue Light-Emitting Diodes

Chenghao Bi et al.

Summary: The research achieved pure-blue emitting small-sized CsPbBr3 perovskite quantum dots with high quantum efficiency and stability through a novel acid etching-driven ligand exchange strategy. The PeLEDs based on these quantum dots demonstrated significant progress in brightness, pure blue electroluminescence, and durability.

ADVANCED MATERIALS (2021)

Add to Collection
Article Materials Science, Multidisciplinary

Blue light-emitting diodes based on halide perovskites: Recent advances and strategies

Jianfeng Zhang et al.

Summary: Metal halide perovskites have been widely used in optoelectronic devices, with green, red, and near-infrared PeLEDs achieving high external quantum efficiencies. However, blue PeLEDs face challenges such as low quantum yields, emission spectrum instability, and difficulties in charge injection. Research is ongoing to improve the efficiency of blue PeLEDs and address these challenges.

MATERIALS TODAY (2021)

Add to Collection
Article Chemistry, Multidisciplinary

Enhanced Optical Properties and Stability of CsPbBr3 Nanocrystals Through Nickel Doping

Hayeong Kim et al.

Summary: By optimizing the structural and optical properties of CsPbBr3 perovskite nanocrystals through Ni doping, the Ni-doped PNCs demonstrate stronger light emission, higher quantum efficiency, and longer lifetimes. The doped divalent element acts as a defect in the perovskite structure, reducing the recombination rate of electrons and holes and improving stability. Ni:CsPbBr3 PNCs exhibit better efficiency and superior luminance compared to CsPbBr3 PNCs, showing promise for future improvements in display device performance.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection
Article Engineering, Environmental

Ultrastable Gd3+ doped CsPbBrI2 nanocrystals red glass for high efficiency WLEDs

Qingyun He et al.

Summary: Gd-doped CsPbBrI2 nanocrystals in borosilicate glass were synthesized successfully, showing improved photoluminescence quantum yields and stability. A high-performance WLED device was fabricated, providing a new strategy for metal ion doped perovskite NCs in the field of LEDs.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection
Article Optics

A novel in-situ process for high performance blue CsPbBr3 perovskite quantum dots via Cs ion-exchange in Sodium Titanium Silicate

Ming Wang et al.

Summary: In this study, high quality and stable inorganic perovskite blue CsPbBr3 QDs were synthesized using crystalline silicotitanate (CST) as a matrix. The as-prepared QDs exhibited a brilliant blue emission peak with a narrow FWHM, high photoluminescent quantum yield, and good air and thermal stability. The color gamut of CST: CsPbBr3 QDS was calculated to be 114.12% of the NTSC standard, indicating a potential application as a backlight source for display devices.

JOURNAL OF LUMINESCENCE (2021)

Add to Collection
Article Materials Science, Multidisciplinary

Ultrasmall CsPbBr3 Quantum Dots with Bright and Wide Blue Emissions

Xiaobo Kong et al.

Summary: This study successfully synthesized blue-emission CsPbBr3 quantum dots with a crystal size of only 1-2 nm and a high photoluminescence quantum yield of 72.4% using a new surface ligand. The blue emission was found to originate from band-edge radiation and exciton recombination, with exciton localization and quantum size confinement being important factors for the efficient and wide blue emissions.

PHYSICA STATUS SOLIDI-RAPID RESEARCH LETTERS (2021)

Add to Collection
Article Multidisciplinary Sciences

Stabilizing electroluminescence color of blue perovskite LEDs via amine group doping

Fengjuan Zhang et al.

Summary: Color-stable blue PeLEDs were achieved through a hydrogen-bonded amine-group doping strategy, with emission peaks fixed at 490.5 (GA) and 492.5 (FA) nm without any obvious shift as the voltage increases. The maximum external quantum efficiency was also significantly improved.

SCIENCE BULLETIN (2021)

Add to Collection
Article Chemistry, Physical

Highly Efficient Sky-Blue Perovskite Light-Emitting Diode Via Suppressing Nonradiative Energy Loss

Zhaohua Zhu et al.

Summary: This study presents a highly efficient sky-blue PeLED based on a quasi-two-dimensional structure with an external quantum efficiency of 13.8%. The high efficiency is achieved by suppressing both triplet and trap-assisted nonradiative energy loss using a ligand with high-triplet-energy and dual-functional passivation groups, proposing a universal strategy to improve the efficiency of sky-blue PeLEDs.

CHEMISTRY OF MATERIALS (2021)

Add to Collection
Article Chemistry, Physical

Color-Stable Blue Light-Emitting Diodes Enabled by Effective Passivation of Mixed Halide Perovskites

Hongling Yu et al.

Summary: Bandgap tuning through mixing halide anions is an attractive feature for metal halide perovskites, but mixed halide perovskites often exhibit phase segregation under electrical biases. By effectively passivating surface defects, researchers have achieved color-stable blue electroluminescence from mixed bromide/chloride perovskite LEDs, providing new insights into the color instability issue and encouraging further development of high-performance and color-stable blue PeLEDs.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2021)

Add to Collection
Article Materials Science, Multidisciplinary

Cryogenic-Temperature Thermodynamically Suppressed and Strongly Confined CsPbBr3 Quantum Dots for Deeply Blue Light-Emitting Diodes

Jingjing Cao et al.

Summary: This study introduces a cryogenic temperature synthetic strategy to obtain ultrasmall CsPbBr3 quantum dots, which exhibit strong deeply blue emission with high quantum yield and excellent spectra stability, paving the way for the development of next generation solid-state lighting and displays.

ADVANCED OPTICAL MATERIALS (2021)

Add to Collection
Article Optics

Ultrastable Gd3+ doped CsPbCl1.5Br1.5 nanocrystals blue glass for regulated and low thresholds amplified spontaneous emission

Qingyun He et al.

Summary: By doping Gd into CsPbCl1.5Br1.5 NCs glasses, the photoluminescence intensity can be increased and the glasses exhibit excellent water stability and thermal cycling performance. The influence of doping concentrations and heat-treatment temperatures on the amplified spontaneous emission (ASE) thresholds of CsPbCl1.5Br1.5 NCs glasses was studied, achieving controllable ASE thresholds as low as 0.39 mJ/cm(2) at room temperature.

PHOTONICS RESEARCH (2021)

Add to Collection
Article Materials Science, Multidisciplinary

Nucleation-controlled growth of ultra-small perovskite quantum dots for bright blue light-emitting diodes

Shuhua Tu et al.

Summary: An effective synthesis strategy for ultra-small blue CsPbBr3 quantum dots (QDs) was reported, using PbBr2 clusters as nucleation sites and reacting with Cs-oleate at relatively low temperatures. The emission wavelength of CsPbBr3 QDs can be easily tuned by the amount of Cs-oleate or reaction temperature, with a maximum photoluminescence quantum yield reaching above 64%. The CsPbBr3 QDs were further coated with superhydrophobic fluorinated silica and successfully applied in blue light-emitting diodes (LEDs), providing a new synthesis strategy for efficient and stable blue PQDs.

JOURNAL OF MATERIALS CHEMISTRY C (2021)

Add to Collection
Article Materials Science, Multidisciplinary

Conjugated amidine ligands enhance the performance of perovskite nanocrystal blue light-emitting diodes prepared in air with green solvents

Teng Li et al.

Summary: Introducing amidine ligands has been shown to enhance the performance of blue PeLEDs based on perovskite NCs, reducing nonradiative recombination and improving charge transport.

JOURNAL OF MATERIALS CHEMISTRY C (2021)

Add to Collection
Article Materials Science, Multidisciplinary

Luminance efficiency roll-off mechanism in CsPbBr3-xClx mixed-halide perovskite quantum dot blue light-emitting diodes

Young Ran Park et al.

Summary: Efficiency roll-off in blue light-emitting diodes is attributed to a combination of factors, including luminescence quenching, charge transfer processes at the core/shell interface, and imbalanced charge injection at the heterointerface.

JOURNAL OF MATERIALS CHEMISTRY C (2021)

Add to Collection
Article Engineering, Electrical & Electronic

All-Inorganic Perovskite Quantum Dots Based on InX3-Trioctylphosphine Oxide Hybrid Passivation Strategies for High-Performance and Full-Colored Light-Emitting Diodes

Yanni Sun et al.

Summary: This study focused on the preparation of highly stable CsPbX3 PeQD films using InX3 and TOPO as surface passivation ligands, which resulted in PeQDs with high photoluminance quantum yields and long-term stability. Full-colored perovskite QLEDs based on InX3-TOPO-CsPbX3 PeQDs achieved high EQE and luminance, showcasing a promising strategy for efficient, stable, and color-tunable perovskite QLEDs.

ACS APPLIED ELECTRONIC MATERIALS (2021)

Add to Collection
Article Nanoscience & Nanotechnology

Highly efficient Mn-doped CsPb(Cl/Br)3 quantum dots for white light-emitting diodes

Chun Sun et al.

NANOTECHNOLOGY (2020)

Add to Collection
Article Materials Science, Multidisciplinary

Postdeposition Ligand Exchange Allows Tuning the Transport Properties of Large-Scale CuInSe2 Quantum Dot Solids

Friederieke E. S. Gorris et al.

ADVANCED OPTICAL MATERIALS (2020)

Add to Collection
Article Nanoscience & Nanotechnology

Bright Blue Light Emission of Ni2+ Ion-Doped CsPbClxBr3-x Perovskite Quantum Dots Enabling Efficient Light-Emitting Devices

Gencai Pan et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection
Article Chemistry, Multidisciplinary

Efficient and Spectrally Stable Blue Perovskite Light-Emitting Diodes Based on Potassium Passivated Nanocrystals

Fei Yang et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection
Article Chemistry, Physical

Chlorine Vacancy Passivation in Mixed Halide Perovskite Quantum Dots by Organic Pseudohalides Enables Efficient Rec. 2020 Blue Light-Emitting Diodes

Xiaopeng Zheng et al.

ACS ENERGY LETTERS (2020)

Add to Collection
Article Chemistry, Physical

Spectral Tuning of Efficient CsPbBrxCl3-x Blue Light-Emitting Diodes via Halogen Exchange Triggered by Benzenesulfonates

Fanghao Ye et al.

CHEMISTRY OF MATERIALS (2020)

Add to Collection
Article Materials Science, Multidisciplinary

Highly Stable All-Inorganic Perovskite Quantum Dots Using a ZnX2-Trioctylphosphine-Oxide: Application for High-Performance Full-Color Light-Emitting Diode

Seungmin Baek et al.

ADVANCED OPTICAL MATERIALS (2020)

Add to Collection
Article Chemistry, Multidisciplinary

Dual Passivation of CsPbI3 Perovskite Nanocrystals with Amino Acid Ligands for Efficient Quantum Dot Solar Cells

Donglin Jia et al.

SMALL (2020)

Add to Collection
Article Materials Science, Multidisciplinary

Surface Regulation of CsPbBr3 Quantum Dots for Standard Blue-Emission with Boosted PLQY

Shasha Shi et al.

ADVANCED OPTICAL MATERIALS (2020)

Add to Collection
Article Materials Science, Multidisciplinary

Blue Perovskite Nanocrystal Light-Emitting Devices via the Ligand Exchange with Adamantane Diamine

Takayuki Chiba et al.

ADVANCED OPTICAL MATERIALS (2020)

Add to Collection
Article Chemistry, Multidisciplinary

Eco-Friendly Strategy To Improve Durability and Stability of Zwitterionic Capping Ligand Colloidal CsPbBr3 Nanocrystals

Siyu Guo et al.

LANGMUIR (2020)

Add to Collection
Review Chemistry, Multidisciplinary

Multifunctional Charge Transporting Materials for Perovskite Light-Emitting Diodes

Ji-Eun Jeong et al.

ADVANCED MATERIALS (2020)

Add to Collection
Article Chemistry, Multidisciplinary

In Situ Ligand Bonding Management of CsPbI3Perovskite Quantum Dots Enables High-Performance Photovoltaics and Red Light-Emitting Diodes

Junwei Shi et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Add to Collection
Article Nanoscience & Nanotechnology

Bipolar-shell resurfacing for blue LEDs based on strongly confined perovskite quantum dots

Yitong Dong et al.

NATURE NANOTECHNOLOGY (2020)

Add to Collection
Article Materials Science, Ceramics

Enhanced stability of red-emitting CsPbI3:Yb3+ nanocrystal glasses: A potential luminescent material

Lin Yuan et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2020)

Add to Collection
Article Chemistry, Multidisciplinary

Highly Efficient Blue-Emitting CsPbBr3Perovskite Nanocrystals through Neodymium Doping

Yujun Xie et al.

ADVANCED SCIENCE (2020)

Add to Collection
Article Nanoscience & Nanotechnology

Neodymium Chloride-Doped Perovskite Nanocrystals for Efficient Blue Light-Emitting Devices

Takayuki Chiba et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection
Article Chemistry, Physical

Enhancing quantum yield of CsPb(BrxCl1-x)3 nanocrystals through lanthanum doping for efficient blue light-emitting diodes

Shuai Zhang et al.

NANO ENERGY (2020)

Add to Collection
Article Materials Science, Multidisciplinary

Multiple Cations Enhanced Defect Passivation of Blue Perovskite Quantum Dots Enabling Efficient Light-Emitting Diodes

Jiangyong Pan et al.

ADVANCED OPTICAL MATERIALS (2020)

Add to Collection
Article Chemistry, Multidisciplinary

Nanocrystalline structure control and tunable luminescence mechanism of Eu-doped CsPbBr3 quantum dot glass for WLEDs

Panpan Li et al.

NANOSCALE (2020)

Add to Collection
Article Chemistry, Multidisciplinary

High brightness blue light-emitting diodes based on CsPb(Cl/Br)(3) perovskite QDs with phenethylammonium chloride passivation

He Shao et al.

NANOSCALE (2020)

Add to Collection
Article Chemistry, Physical

Thermally Stable Copper(II)-Doped Cesium Lead Halide Perovskite Quantum Dots with Strong Blue Emission

Chenghao Bi et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2019)

Add to Collection
Article Multidisciplinary Sciences

On the degradation mechanisms of quantum-dot light-emitting diodes

Song Chen et al.

NATURE COMMUNICATIONS (2019)

Add to Collection
Article Multidisciplinary Sciences

Modulation of recombination zone position for quasi-two-dimensional blue perovskite light-emitting diodes with efficiency exceeding 5%

Zhenchao Li et al.

NATURE COMMUNICATIONS (2019)

Add to Collection
Article Materials Science, Multidisciplinary

Surface Halogen Compensation for Robust Performance Enhancements of CsPbX3 Perovskite Quantum Dots

Dandan Yang et al.

ADVANCED OPTICAL MATERIALS (2019)

Add to Collection
Article Chemistry, Multidisciplinary

Short-Chain Ligand-Passivated Stable α-CsPbI3 Quantum Dot for All-Inorganic Perovskite Solar Cells

Keqiang Chen et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection
Article Chemistry, Multidisciplinary

Improved Stability and Photodetector Performance of CsPbI3 Perovskite Quantum Dots by Ligand Exchange with Aminoethanethiol

Chenghao Bi et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection
Article Materials Science, Multidisciplinary

Enhancing the exciton emission of CsPbCl3 perovskite quantum dots by incorporation of Rb+ ions

Zhenyu Zhao et al.

MATERIALS RESEARCH BULLETIN (2019)

Add to Collection
Article Chemistry, Multidisciplinary

Ultrastable CsPbBr3 Perovskite Quantum Dot and Their Enhanced Amplified Spontaneous Emission by Surface Ligand Modification

Dongdong Yan et al.

SMALL (2019)

Add to Collection
Article Nanoscience & Nanotechnology

Engineering Color-Stable Blue Light-Emitting Diodes with Lead Halide Perovskite Nanocrystals

Stefan T. Ochsenbein et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection
Article Nanoscience & Nanotechnology

Vivid and Fully Saturated Blue Light-Emitting Diodes Based on Ligand-Modified Halide Perovskite Nanocrystals

Yun Seop Shin et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection
Article Nanoscience & Nanotechnology

Stable and Strong Emission CsPbBr3 Quantum Dots by Surface Engineering for High-Performance Optoelectronic Films

Chao Zheng et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection
Article Chemistry, Physical

14.1% CsPbI3 Perovskite Quantum Dot Solar Cells via Cesium Cation Passivation

Xufeng Ling et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection
Article Chemistry, Multidisciplinary

General Mild Reaction Creates Highly Luminescent Organic-Ligand-Lacking Halide Perovskite Nanocrystals for Efficient Light-Emitting Diodes

Bin-Bin Zhang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

Add to Collection
Article Materials Science, Multidisciplinary

Spectrally Tunable and Stable Electroluminescence Enabled by Rubidium Doping of CsPbBr3 Nanocrystals

Petar Todorovic et al.

ADVANCED OPTICAL MATERIALS (2019)

Add to Collection
Article Chemistry, Physical

Enhanced Charge Injection and Recombination of CsPbBr3 Perovskite Nanocrystals upon Internal Heterovalent Substitution

Jingna Jia et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2019)

Add to Collection
Article Chemistry, Physical

Direct Synthesis of Quaternary Alkylammonium-Capped Perovskite Nanocrystals for Efficient Blue and Green Light-Emitting Diodes

Yevhen Shynkarenko et al.

ACS ENERGY LETTERS (2019)

Add to Collection
Article Chemistry, Physical

Engineering Green-to-Blue Emitting CsPbBr3 Quantum-Dot Films with Efficient Ligand Passivation

Maowei Jiang et al.

ACS ENERGY LETTERS (2019)

Add to Collection
Article Chemistry, Physical

Cesium Lead Chloride/Bromide Perovskite Quantum Dots with Strong Blue Emission Realized via a Nitrate-Induced Selective Surface Defect Elimination Process

Shixun Wang et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2019)

Add to Collection
Article Nanoscience & Nanotechnology

Anion- and Cation-Codoped All-Inorganic Blue-Emitting Perovskite Quantum Dots for Light-Emitting Diodes

Mohammad Zirak et al.

ACS APPLIED NANO MATERIALS (2019)

Add to Collection
Article Chemistry, Multidisciplinary

Water-stable and ion exchange-free inorganic perovskite quantum dots encapsulated in solid paraffin and their application in light emitting diodes

Haishan Wu et al.

NANOSCALE (2019)

Add to Collection
Article Nanoscience & Nanotechnology

Interfacial Energy-Level Alignment for High-Performance All Inorganic Perovskite CsPbBr3 Quantum Dot-Based Inverted Light Emitting Diodes

Alagesan Subramanian et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection
Article Nanoscience & Nanotechnology

Balancing the Electron and Hole Transfer for Efficient Quantum Dot Light-Emitting Diodes by Employing a Versatile Organic Electron-Blocking Layer

Xiao Jin et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection
Article Chemistry, Multidisciplinary

Reducing Architecture Limitations for Efficient Blue Perovskite Light-Emitting Diodes

Mahesh K. Gangishetty et al.

ADVANCED MATERIALS (2018)

Add to Collection
Article Chemistry, Multidisciplinary

Charge Transport between Coupling Colloidal Perovskite Quantum Dots Assisted by Functional Conjugated Ligands

Jinfei Dai et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

Add to Collection
Article Chemistry, Physical

Room-Temperature Construction of Mixed-Halide Perovskite Quantum Dots with High Photoluminescence Quantum Yield

Chenghao Bi et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2018)

Add to Collection
Article Chemistry, Multidisciplinary

Doping-Enhanced Short-Range Order of Perovskite Nanocrystals for Near-Unity Violet Luminescence Quantum Yield

Zi-Jun Yong et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

Add to Collection
Article Chemistry, Multidisciplinary

Considerably enhanced exciton emission of CsPbCl3 perovskite quantum dots by the introduction of potassium and lanthanide ions

Yanan Liu et al.

NANOSCALE (2018)

Add to Collection
Article Materials Science, Multidisciplinary

Development of Mixed-Cation CsxRb1-xPbX3 Perovskite Quantum Dots and Their Full-Color Film with High Stability and Wide Color Gamut

Seungmin Baek et al.

ADVANCED OPTICAL MATERIALS (2018)

Add to Collection
Article Chemistry, Physical

Colloidal CsPbX3 (X = CI, Br, I) Nanocrystals 2.0: Zwitterionic Capping Ligands for Improved Durability and Stability

Franziska Krieg et al.

ACS ENERGY LETTERS (2018)

Add to Collection
Article Chemistry, Physical

Original Core-Shell Structure of Cubic CsPbBr3@Amorphous CsPbBrx Perovskite Quantum Dots with a High Blue Photoluminescence Quantum Yield of over 80%

Shixun Wang et al.

ACS ENERGY LETTERS (2018)

Add to Collection
Article Chemistry, Multidisciplinary

Near ultra-violet to mid-visible band gap tuning of mixed cation RbxCs1-xPbX3 (X = Cl or Br) perovskite nanoparticles

Daniel Amgar et al.

NANOSCALE (2018)

Add to Collection
Article Nanoscience & Nanotechnology

Ultrafast Spectral Dynamics of CsPb(BrxCl1-x)3 Mixed-Halide Nanocrystals

Naiya Soetan et al.

ACS PHOTONICS (2018)

Add to Collection
Article Chemistry, Physical

Postsynthesis Doping of Mn and Yb into CsPbX3 (X = CI, Br, or I) Perovskite Nanocrystals for Downconversion Emission

Wasim J. Mir et al.

CHEMISTRY OF MATERIALS (2018)

Add to Collection
Article Chemistry, Physical

Efficient Blue and White Perovskite Light-Emitting Diodes via Manganese Doping

Shaocong Hou et al.

JOULE (2018)

Add to Collection
Article Chemistry, Multidisciplinary

Highly Emissive Divalent-Ion-Doped Colloidal CsPb1-xMxBr3 Perovskite Nanocrystals through Cation Exchange

Ward van der Stam et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)

Add to Collection
Article Chemistry, Multidisciplinary

Aluminum-Doped Cesium Lead Bromide Perovskite Nanocrystals with Stable Blue Photoluminescence Used for Display Backlight

Ming Liu et al.

ADVANCED SCIENCE (2017)

Add to Collection
Review Multidisciplinary Sciences

Lead halide perovskites: Crystal-liquid duality, phonon glass electron crystals, and large polaron formation

Kiyoshi Miyata et al.

SCIENCE ADVANCES (2017)

Add to Collection
Article Chemistry, Multidisciplinary

High-Brightness Blue and White LEDs based on Inorganic Perovskite Nanocrystals and their Composites

En-Ping Yao et al.

ADVANCED MATERIALS (2017)

Add to Collection
Article Nanoscience & Nanotechnology

Shape-Controlled Synthesis of All-Inorganic CsPbBr3 Perovskite Nanocrystals with Bright Blue Emission

Zhiqin Liang et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Add to Collection
Article Nanoscience & Nanotechnology

Ultrastable Quantum-Dot Light-Emitting Diodes by Suppression of Leakage Current and Exciton Quenching Processes

Han Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Add to Collection
Article Chemistry, Multidisciplinary

CsPbX3 Quantum Dots for Lighting and Displays: Room-Temperature Synthesis, Photoluminescence Superiorities, Underlying Origins and White Light-Emitting Diodes

Xiaoming Li et al.

ADVANCED FUNCTIONAL MATERIALS (2016)

Add to Collection
Article Chemistry, Multidisciplinary

Highly Efficient Perovskite Nanocrystal Light-Emitting Diodes Enabled by a Universal Crosslinking Method

Guangru Li et al.

ADVANCED MATERIALS (2016)

Add to Collection
Article Chemistry, Multidisciplinary

Highly Efficient Perovskite-Quantum-Dot Light-Emitting Diodes by Surface Engineering

Jun Pan et al.

ADVANCED MATERIALS (2016)

Add to Collection
Article Chemistry, Multidisciplinary

Quantum Dot Light-Emitting Diodes Based on Inorganic Perovskite Cesium Lead Halides (CsPbX3)

Jizhong Song et al.

ADVANCED MATERIALS (2015)

Add to Collection
Article Chemistry, Multidisciplinary

Nanocrystals of Cesium Lead Halide Perovskites (CsPbX3, X = Cl, Br, and I): Novel Optoelectronic Materials Showing Bright Emission with Wide Color Gamut

Loredana Protesescu et al.

NANO LETTERS (2015)

Add to Collection
Article Multidisciplinary Sciences

Solution-processed, high-performance light-emitting diodes based on quantum dots

Xingliang Dai et al.

NATURE (2014)

Add to Collection
Webinars Posters Questions Hubs Funding Journals Papers Connect Collections Reviewers About Us FAQs Mobile App Privacy Policy Terms of Use
© Peeref 2019-2024. All rights reserved.