☆ 4.7 Review

Recent Progress in Morphology-Tuned Nanomaterials for the Electrochemical Detection of Heavy Metals

NANOMATERIALS (2022)

Related references

Note: Only part of the references are listed.

Article Chemistry, Analytical

Bismuth nanoparticles decorated on Na-montmorillonite-multiwall carbon nanotube for simultaneous determination of heavy metal ions- electrochemical methods

Ceren Yildiz et al.

Summary: This study presents a electrochemical sensor based on pencil graphite electrode and its application in the quantification of heavy metals. The sensor has a high conductive surface area, capable of producing high signals, making it more suitable for electrochemical analysis compared to unmodified electrodes.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Electrochemical sensor based on metal-free materials composed of graphene and graphene oxide for sensitive detection of cadmium ions in water

Qian Shan et al.

Summary: In this study, a high-speed dispersive homogenizer was used to exfoliate graphite oxide and prepare graphene oxide metal-free composite materials. These materials were then used for electrochemical detection of cadmium ions in water. The fabricated composite had enhanced hydrophilicity and conductivity, leading to improved contact and response with the cadmium ions. The assembled electrochemical sensor based on the composite exhibited superior analysis performance and satisfactory detection accuracy for tap water samples.

MATERIALS CHEMISTRY AND PHYSICS (2022)

Add to Collection

Article Chemistry, Analytical

Engineering Co2+/Co3+ redox activity of Ni-mediated porous Co3O4 nanosheets for superior Hg(II) electrochemical sensing: Insight into the effect of valence change cycle and oxygen vacancy on electroanalysis

Shan-Shan Li et al.

Summary: Transition metal oxides (TMOs) have been recognized as promising sensing materials for heavy metal ions (HMIs) detection, mainly due to strong adsorption of HMIs on surface oxygen vacancies (OVs) of TMOs. However, the role of valence change induced redox activity of TMOs in HMIs detection has not received sufficient attention, hindering further development. This study proposes a facile strategy to co-engineer the redox activity and surface OVs of porous Co3O4 nanosheets by Ni doping, achieving enhanced redox activity and adsorption simultaneously. The results demonstrate that the valence change cycle of Co cations plays a more important role in electrochemical detection than the adsorption of Hg(II) on OVs, and Ni-doping facilitates this valence change cycle. This work provides a feasible way to develop TMOs-based sensing materials by synergizing their redox activity and adsorption ability towards HMIs.

SENSORS AND ACTUATORS B-CHEMICAL (2022)

Add to Collection

Article Engineering, Environmental

Carbon-supported X-manganate (X--Ni, Zn, and Cu) nanocomposites for sensitive electrochemical detection of trace heavy metal ions

Peng Lei et al.

Summary: A simple and efficient method for preparing carbon-supported X-manganate nanocomposites was explored for the individual and simultaneous electrochemical detection of Pb(II) and Hg(II). The nanocomposites showed excellent electrochemical performance, with NMO-GR exhibiting the best results. The electrochemical sensor based on NMO-GR displayed the widest linear ranges and the lowest detection limits.

JOURNAL OF HAZARDOUS MATERIALS (2022)

Add to Collection

Article Chemistry, Analytical

Star-shaped porous nitrogen-doped metal-organic framework carbon as an electrochemical platform for sensitive determination of Cd(II) in environmental and tobacco samples

Ruihua Huang et al.

Summary: In this study, cetyltrimethylammonium bromide and zeolitic imidazolate framework-8 (ZIF-8) were assembled via chemical co-precipitation, and high-quality carbon-based metal-free nanomaterials were synthesized using heat treatment. The internal and morphological characteristics of hexagonal Star ZIF-8 were investigated. An electrochemical sensor with a good response to Cd(II) was prepared using Star ZIF-8 nanomaterial-modified electrodes. The sensitivity of the sensor was increased by five orders of magnitude.

ANALYTICA CHIMICA ACTA (2022)

Add to Collection

Article Engineering, Environmental

Hazardous ions decontamination: From the element to the material

Yeisy C. Lopez et al.

Summary: This article provides an overview of the strategies for the decontamination of toxic ions from different perspectives. It discusses the physicochemical properties and hazardous effects of these ions, as well as their impact on the environment and human health. Additionally, it explores the design of more efficient and selective materials for ion removal and offers insights into the future direction of materials science in this field.

CHEMICAL ENGINEERING JOURNAL ADVANCES (2022)

Add to Collection

Review Chemistry, Analytical

2D Transition Metal Carbides (MXene) for Electrochemical Sensing: A Review

Faisal Shahzad et al.

Summary: MXene, a promising material with outstanding characteristics, has been widely used in various sensing applications. It can form composites with other nanomaterials and help immobilize target molecules. Previous studies have shown that MXene has been increasingly utilized in sensing diverse types of analytes. This review summarizes the recent updates in MXene modified materials for sensing and discusses its synthesis approaches, properties, challenges, and future research directions.

CRITICAL REVIEWS IN ANALYTICAL CHEMISTRY (2022)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Simple fabrication of a hexagonal prisms with hexagonal pyramid tips V2O5@MOF(V, Co) and its application as electrochemical sensor for Pb2+

Baitong Niu et al.

Summary: A V2O5@MOF(V, Co) composite material was prepared and used for electrochemical detection of Pb2+ in aqueous solution, with optimized operational parameters, providing a feasible research method and practical strategy for sensitive and online detection of lead ions.

INORGANIC CHEMISTRY COMMUNICATIONS (2021)

Add to Collection

Article Chemistry, Physical

Materials Approaches for Improving Electrochemical Sensor Performance

Kevin Beaver et al.

Summary: Electrochemical sensors have become important diagnostic tools in recent years due to their simplicity and ease of use, showing promise for real-time applications such as pharmaceutical testing and medical diagnostics. Materials used for electrodes and chemically selective layers have been evolving to optimize analytical performance. Future research will focus on addressing existing challenges and proposing new strategies.

JOURNAL OF PHYSICAL CHEMISTRY B (2021)

Add to Collection

Article Chemistry, Analytical

Highly sensitive mercury detection using electroactive gold-decorated polymer nanofibers

Farideh Hosseini Narouei et al.

Summary: A novel conductive nanofibrillar structure with a high number of nitrogen binding sites enhances detection sensitivity of electrodes for mercury ions. The sensor has a detection limit of 0.23 nM, a linear dynamic range, and is selective for Hg2+. The method provides a broadly applicable strategy for increasing sensitivity of electrochemical sensors for field monitoring of heavy metal ion pollution.

SENSORS AND ACTUATORS B-CHEMICAL (2021)

Add to Collection

Review Chemistry, Analytical

Recent Trends in the Improvement of the Electrochemical Response of Screen-Printed Electrodes by Their Modification with Shaped Metal Nanoparticles

Karina Torres-Rivero et al.

Summary: Novel sensing technologies need to be simple, fast, inexpensive, and reliable for wastewater treatment plants, the food industry, and environmental control agencies. Electrochemical analysis based on SPEs is an excellent miniaturized and portable alternative that can be enhanced using nanoparticles.

SENSORS (2021)

Add to Collection

Article Chemistry, Applied

Rapid detection of cadmium ions in meat by a multi-walled carbon nanotubes enhanced metal-organic framework modified electrochemical sensor

Xin Wang et al.

Summary: The electrochemical sensor based on UiO-66-NH2@MWCNTs composites showed excellent linear relationship and detection limit for Cd2+. It was successfully applied for detecting Cd2+ in meat samples with high recovery rates and no significant difference compared to the certified method.

FOOD CHEMISTRY (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Recent developments in voltammetric and amperometric sensors for cysteine detection

Somayeh Tajik et al.

Summary: This review article provides an overview of recent advances in voltammetric and amperometric sensing of cysteine (Cys), discussing its important role as an essential amino acid, sensing techniques, and utilization of electrochemical methods. The main focus is on the use of various electrocatalytic materials to modify electrodes for voltammetric and amperometric sensing of Cys. The conclusion highlights current challenges in Cys determination and future perspectives.

RSC ADVANCES (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Electrochemical Sensors, a Bright Future in the Fabrication of Portable Kits in Analytical Systems

Hassan Karimi-Maleh et al.

CHEMICAL RECORD (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Preparation and Application of Bismuth/MXene Nano-Composite as Electrochemical Sensor for Heavy Metal Ions Detection

Ying He et al.

NANOMATERIALS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Application of Zero-Dimensional Nanomaterials in Biosensing

Zhengdi Wang et al.

FRONTIERS IN CHEMISTRY (2020)

Add to Collection

Article Chemistry, Analytical

Morphology-controlled electrochemical sensing of environmental Cd2+ and Pb2+ ions on expanded graphite supported CeO2 nanomaterials

Wenjie Huang et al.

ANALYTICA CHIMICA ACTA (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Current Trends in Nanomaterials for Metal Oxide-Based Conductometric Gas Sensors: Advantages and Limitations. Part 1: 1D and 2D Nanostructures

Ghenadii Korotcenkov

NANOMATERIALS (2020)

Add to Collection

Article Chemistry, Analytical

Electrochemical and density functional theory investigation on the differential behaviors of core-ring structured NiCo2O4 nanoplatelets toward heavy metal ions

Jianjun Liao et al.

ANALYTICA CHIMICA ACTA (2018)

Add to Collection

Article Electrochemistry

Facile one-step fabrication of a novel 3D honeycomb-like bismuth nanoparticles decorated N-doped carbon nanosheet frameworks: Ultrasensitive electrochemical sensing of heavy metal ions

Zhiwei Lu et al.

ELECTROCHIMICA ACTA (2018)

Add to Collection

Article Chemistry, Physical

One pot synthesis of dandelion-like polyaniline coated gold nanoparticles composites for electrochemical sensing applications

Zhiwei Lu et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2018)

Add to Collection

Article Electrochemistry

Insights into diverse performance for the electroanalysis of Pb(II) on Fe2O3 nanorods and hollow nanocubes: Toward analysis of adsorption sites

Shan-Shan Li et al.

ELECTROCHIMICA ACTA (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Zinc oxide nanopillars as an electrocatalyst for direct redox sensing of cadmium

Gaurav Bhanjana et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2017)

Add to Collection

Review Biophysics

A review on various electrochemical techniques for heavy metal ions detection with different sensing platforms

BabanKumar Bansod et al.

BIOSENSORS & BIOELECTRONICS (2017)

Add to Collection

Article Chemistry, Physical

Morphology-dependent NiO modified glassy carbon electrode surface for lead(II) and cadmium(II) detection

Xuewu Li et al.

APPLIED SURFACE SCIENCE (2016)

Add to Collection

Article Electrochemistry

Facile and green fabrication of size-controlled AuNPs/CNFs hybrids for the highly sensitive simultaneous detection of heavy metal ions

Bin Zhang et al.

ELECTROCHIMICA ACTA (2016)

Add to Collection

Article Chemistry, Applied

A sensitive and selective sensing platform based on CdTe QDs in the presence of L-cysteine for detection of silver, mercury and copper ions in water and various drinks

Tingting Gong et al.

FOOD CHEMISTRY (2016)

Add to Collection

Article Materials Science, Biomaterials

Multicolour fluorescent carbon nanoparticle probes for live cell imaging and dual palladium and mercury sensors

Vinay Sharma et al.

JOURNAL OF MATERIALS CHEMISTRY B (2016)

Add to Collection

Article Electrochemistry

Graphene quantum dots functionalized gold nanoparticles for sensitive electrochemical detection of heavy metal ions

Siong Luong Ting et al.

ELECTROCHIMICA ACTA (2015)

Add to Collection

Article Electrochemistry

Sno2 quantum dots as novel platform for electrochemical sensing of cadmium

Gaurav Bhanjana et al.

ELECTROCHIMICA ACTA (2015)

Add to Collection

Article Chemistry, Analytical

Fe3O4 with novel nanoplate-stacked structure: Surfactant-free hydrothermal synthesis and application in detection of heavy metal ions

Wen-Juan Li et al.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2015)

Add to Collection

Article Chemistry, Analytical

Graphene/CeO2 hybrid materials for the simultaneous electrochemical detection of cadmium(II), lead (II), copper(II), and mercury(II)

Yu-Long Xie et al.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2015)

Add to Collection

Article Chemistry, Analytical

Silica sequentially modified with polyhexamethylene guanidine and Arsenazo I for preconcentration and ICP-OES determination of metals in natural waters

Vladimir N. Losev et al.

MICROCHEMICAL JOURNAL (2015)

Add to Collection

Article Chemistry, Analytical

Ultrasensitive and simultaneous detection of heavy metal ions based on three-dimensional graphene-carbon nanotubes hybrid electrode materials

Hui Huang et al.

ANALYTICA CHIMICA ACTA (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Unique Lead Adsorption Behavior of Activated Hydroxyl Group in Two-Dimensional Titanium Carbide

Qiuming Peng et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)

Add to Collection

Article Chemistry, Analytical

Nanomaterial/Ionophore-Based Electrode for Anodic Stripping Voltammetric Determination of Lead: An Electrochemical Sensing Platform toward Heavy Metals

Dawei Pan et al.

ANALYTICAL CHEMISTRY (2009)

Add to Collection

Article Chemistry, Physical

Graphene-Metal Particle Nanocomposites

Chao Xu et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2008)

Add to Collection

Article Materials Science, Multidisciplinary

Classification of nanostructures by dimensionality and concept of surface forms engineering in nanomaterial science

V. V. Pokropivny et al.

MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS (2007)

Add to Collection

Review Chemistry, Analytical

Atomic spectroscopy

Nicolas H. Bings et al.

ANALYTICAL CHEMISTRY (2006)

Add to Collection

Article Chemistry, Physical

Nano-scale effects in electrochemistry

J Meier et al.

CHEMICAL PHYSICS LETTERS (2004)

Add to Collection

Review Materials Science, Multidisciplinary

Nanostructured materials: Basic concepts and microstructure

H Gleiter

ACTA MATERIALIA (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.