☆ 4.5 Review

Advances in Hydraulic Fracture Propagation Research in Shale Reservoirs

MINERALS (2022)

Related references

Note: Only part of the references are listed.

Article Energy & Fuels

Experimental study on relationship between fracture propagation and pumping parameters under constant pressure injection conditions

Yu Zhao et al.

Summary: Laboratory fracturing experiments under constant pressure injection conditions reveal that hydraulic fractures exhibit prolonged extension periods and more complex morphology compared to constant flow injection. The relationship between pumping parameters and fracture behavior is closely correlated, providing a reliable reflection of the hydraulic fracturing process.

FUEL (2022)

Add to Collection

Article Energy & Fuels

Hydraulic fracturing characteristics and evaluation of fracturing effectiveness under different anisotropic angles and injection rates: An experimental investigation in absence of confining pressure

Yu Zhao et al.

Summary: This study investigates the effects of shale laminate anisotropic angles and injection rates on fracture propagation in low-permeability gas reservoirs. Results show that under uniaxial stress, changing the anisotropic angle close to 45 degrees and reducing the injection rate contribute to a more tortuous fracture path and larger stimulated fracture volume. The findings suggest that samples with low injection rate and large anisotropic angle (>45 degrees) could achieve optimal fracturing results.

JOURNAL OF NATURAL GAS SCIENCE AND ENGINEERING (2022)

Add to Collection

Article Energy & Fuels

Numerical simulation of the non-Newtonian fracturing fluid influences on the fracture propagation

Min Wen et al.

Summary: This paper analyzes the influencing factors of fracture propagation of non-Newtonian fluid fracturing fluid, establishes a fracture propagation model considering the rheology and filtration of the fracturing fluid, and provides specific parameters affecting fracture propagation. The research shows that fracture length and width gradually increase during the process of propagation, and factors such as fluid properties, rock physical properties, and injection parameters have a significant impact on fracture propagation.

ENERGY SCIENCE & ENGINEERING (2022)

Add to Collection

Review Energy & Fuels

Review of pseudo-three-dimensional modeling approaches in hydraulic fracturing

Hai T. Nguyen et al.

Summary: The pseudo-three-dimensional (P3D) approach serves as an efficient computational tool in hydraulic fracture modeling, bridging the gap between two-dimensional and three-dimensional models. The evolution of P3D modeling and its application in complex fracture network models for shale oil and gas reservoirs has been discussed, with simulations showing good validation of the numerical algorithm and the impact of variable injection rates on fracture propagation.

JOURNAL OF PETROLEUM EXPLORATION AND PRODUCTION TECHNOLOGY (2022)

Add to Collection

Article Energy & Fuels

Murree Clay Problems and Water-Based Drilling Mud Optimization: A Case Study from the Kohat Basin in Northwestern Pakistan

S. M. Talha Qadri et al.

Summary: Drilling mud optimization is necessary to address the negative effects of the Murree clay on rheological properties. Adding KCl significantly improves the mud's rheological properties and performance.

ENERGIES (2022)

Add to Collection

Article Geosciences, Multidisciplinary

Influence of natural fractures on propagation of hydraulic fractures in tight reservoirs during hydraulic fracturing

Yueliang Liu et al.

Summary: This study investigates the influence of natural fractures on the propagation of hydraulic fractures during hydraulic fracturing in tight reservoirs. The experimental results show that the presence of pre-existing fractures with different dip angles and distances from the wellbore can affect the propagation of hydraulic fractures. The study also validates the laboratory results through microseismic monitoring technology. This research provides valuable insights into the impact of natural fractures on the hydraulic fracturing process in tight reservoirs.

MARINE AND PETROLEUM GEOLOGY (2022)

Add to Collection

Article Energy & Fuels

Study on fracture initiation pressure of a horizontal well considering the influence of stress shadow in tight sand reservoirs

Liang Fu et al.

Summary: This study developed a model to investigate the impact of stress shadow on fracture initiation pressure and evaluated key parameters using a neural network. The results showed that stress shadow increases the magnitude of the fracture initiation pressure.

JOURNAL OF NATURAL GAS SCIENCE AND ENGINEERING (2022)

Add to Collection

Article Energy & Fuels

Integrated wireline log and seismic attribute analysis for the reservoir evaluation: A case study of the Mount Messenger Formation in Kaimiro Field, Taranaki Basin, New Zealand

A. K. M. Eahsanul Haque et al.

Summary: This study integrates well log and seismic attribute analyses to identify the characteristics of target horizons and improve understanding of the reservoir. The petrophysical analysis reveals the porosity, shale volume, and hydrocarbon content of the Mount Messenger Formation. Seismic attributes help quantify the reservoir property, and contour maps show significant reservoir zones. The study can be extended to a global scale for detailed analysis.

JOURNAL OF NATURAL GAS SCIENCE AND ENGINEERING (2022)

Add to Collection

Article Energy & Fuels

Experimental study on hydraulic fracture propagation behavior on dolomite rocks with open-hole completion

Xian Shi et al.

Summary: The study found that the geometry of fractures in dolomite can affect the overall fracture network formation during hydraulic fracturing operations. By controlling parameters such as fluid viscosity and injection rate, the breakdown pressure can be influenced once the fracture types are determined. The filling material of natural fractures and the fracture width also play a role in the fracture conductivity of hydraulic fractures.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2022)

Add to Collection

Article Engineering, Geological

Phase-Field Modelling of Interactions Between Hydraulic Fractures and Natural Fractures

Xiaoxuan Li et al.

Summary: Hydraulic fracturing is a widely used technique in unconventional reservoirs. The interactions between hydraulic fracture and natural fracture can have a significant impact on the fracture patterns and subsequent productivity. In this study, a phase-field model is used to investigate the influence of in-situ stress, fracturing operational parameters, and natural fracture orientation and strength on the fracture propagation path. The results provide insights into the mechanism behind different propagation patterns and factors affecting fracture complexity.

ROCK MECHANICS AND ROCK ENGINEERING (2022)

Add to Collection

Article Energy & Fuels

Brittleness evaluation based on shale fracture morphology

Zhihong Zhao et al.

Summary: The fracture morphology of shales plays a vital role in determining their brittleness and fracturing network complexity. This research focuses on the Longmaxi Formation shale in China's Weiyuan area and analyzes the morphological characteristics of shale fractures under triaxial compression. The study establishes a method to characterize fracture complexity using fractal theory and analyzes the correlation between rock mechanics parameters, mineral composition, stress-strain curve, dilatability, and shale fracture complexity. The research also establishes a novel brittleness evaluation method based on shale fracture morphology. Results show that certain rock mechanics parameters have a strong correlation with fracture morphology, while others have little correlation. The established brittleness evaluation method shows good correlation with seismic events and reconstruction volume in a shale horizontal well.

JOURNAL OF NATURAL GAS SCIENCE AND ENGINEERING (2022)

Add to Collection

Article Geosciences, Multidisciplinary

Microseismic Monitoring of Hydraulic Fracture Propagation and Seismic Risks in Shale Reservoir with a Steep Dip Angle

Zhaohui Lu et al.

Summary: This paper presents a case study on hydraulic fracturing in a shale reservoir with a steep dip angle. The study validates the feasibility of using microseismic monitoring to track hydraulic fracture propagation in such reservoirs. Additionally, the paper highlights the significance of microseismic monitoring in understanding the complex fracture propagation pathways induced by varying shale reservoir depths.

NATURAL RESOURCES RESEARCH (2022)

Add to Collection

Article Energy & Fuels

Experimental study of hydraulic fracture initiation and propagation in deep shale with different injection methods

Xin Chang et al.

Summary: The study investigates the impact of injection scenarios on deep shale hydraulic fracturing through a series of laboratory fracturing tests. The results reveal that different injection schemes lead to different energy evolution and fracture geometries. Cyclic injection and pulse pressurization injection can reduce rock breakdown pressure and enhance fracture complexity.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2022)

Add to Collection

Article Energy & Fuels

The impact of changes in natural fracture fluid pressure on the creation of fracture networks

Meng Cao et al.

Summary: In this paper, a DDM-based hydraulic fracturing simulator is developed to investigate the effect of changes in fluid pressure in natural fractures on fracture behavior and the resulting geometry of complex fracture networks.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2022)

Add to Collection

Review Energy & Fuels

Research progress on evaluation methods and factors influencing shale brittleness: A review

Hu Li

Summary: This paper comprehensively analyzes and discusses the evaluation methods and factors influencing shale brittleness. The methods for evaluating shale brittleness mainly include the rock stress-strain relationship, brittle minerals, and comprehensive evaluation methods. The factors influencing shale brittleness include internal geological and external environmental factors.

ENERGY REPORTS (2022)

Add to Collection

Article Energy & Fuels

Progress and prospects of horizontal well fracturing technology for shale oil and gas reservoirs

Lei Qun et al.

Summary: This article systematically summarizes the horizontal well fracturing technology for shale oil and gas reservoirs abroad since the 13th Five-Year Plan, and elaborates on new features in 3D development of stacked shale reservoirs, small well spacing and dense well pattern, horizontal well re-fracturing, fracturing parameters optimization and cost control. Based on the requirements for horizontal well fracturing technology in China, the technological progress in multi-fracture propagation simulation, horizontal well frac-design, electric-drive fracturing equipment, soluble tools and low-cost downhole materials, and factory-like operation are summarized. The article also suggests strengthening research and development in seven aspects for the 14th Five-Year Plan.

PETROLEUM EXPLORATION AND DEVELOPMENT (2022)

Add to Collection

Article Engineering, Geological

Observation of Hydraulic Fracture Morphology for Laboratory Experiments by Using Multiple Methods

Peng Tan et al.

Summary: This paper reviews and compares four main monitoring methods for fracture initiation and propagation, including tracer labeling, acoustic emission (AE) monitoring, computerized tomography (CT) scanning and visual fracturing method. Each method has its advantages and limitations, and it is recommended to combine multiple methods in laboratory experiment studies.

GEOTECHNICAL AND GEOLOGICAL ENGINEERING (2021)

Add to Collection

Article Engineering, Geological

Stick-slip like behavior in shear fracture propagation including the effect of fluid flow

Tim Hageman et al.

Summary: The study investigates shear-based fracture propagation in fluid-saturated porous materials using a displacement-pressure formulation that includes acceleration and inertial effects of the fluid. Pressure-dependent plasticity with a nonassociated flow rule is adopted to accurately represent the stresses in the material. The results show that acceleration-driven fluid flow leads to pressure build-up near the fracture tip, causing stick-slip behavior in fracture propagation, especially for high permeability materials.

INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS (2021)

Add to Collection

Article Mechanics

Peridynamic simulation on hydraulic fracture propagation in shale formation

Chengxuan Li et al.

Summary: A new peridynamic fluid-solid coupling model was developed for numerical simulation of hydraulic fracturing in bedding shale formations, incorporating a modified bond-based peridynamic theory and pressure driven fluid transport in porous medium. Validation was done through numerical discretization and three-point bending tests, and results showed that horizontal stress ratio has a greater impact on fracturing pressure, while dip angle plays a crucial role in fracture network shape.

ENGINEERING FRACTURE MECHANICS (2021)

Add to Collection

Article Mechanics

The effect of fracture growth rate on fracture process zone development in quasi-brittle rock

Lei Chen et al.

Summary: This study investigated the influence of fracture growth rate on the length and shape of the fracture process zone (FPZ). The results showed that FPZ characteristics varied in different stages of fracture growth, with higher fracture propagation rates leading to longer FPZ lengths.

ENGINEERING FRACTURE MECHANICS (2021)

Add to Collection

Review Energy & Fuels

A state - of - art review on waterless gas shale fracturing technologies

Muhammed Rashik Mojid et al.

Summary: Waterless fracturing technologies, particularly Sc-CO2, are environmentally friendly and have the potential to replace traditional water-based fracturing, but a thorough understanding of their mechanisms and limitations is necessary.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2021)

Add to Collection

Article Geochemistry & Geophysics

Experimental Investigation on the Initiation of Hydraulic Fractures from a Simulated Wellbore in Laminated Shale

Yang Liu et al.

Summary: Understanding the formation mechanisms of complex fracture networks is crucial for hydraulic fracturing operations in shale formations. An experiment was conducted to investigate the impact of bedding plane angle, borehole size, and injection rate on fracture initiation behaviors of laminated shale rock. The results showed that anisotropic characteristics of shale rock have a significant influence on fracture initiation behaviors, with fracture initiation pressure decreasing as bedding plane dip angle and borehole size increase. Additionally, hydraulic fractures tend to grow along mechanically favorable directions and interact with bedding planes, leading to fracture arrest.

LITHOSPHERE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Hydraulic Fracture Propagation Near the Cavity in a Poroelastic Media

Anton Azarov et al.

Summary: This paper investigates the propagation of hydraulic fractures in a poroelastic medium with a circular cavity and finds that the path of the fracture is strongly influenced by the hydrostatic stress in the medium and the distance between the crack and the cavity. It also shows that the cracks are less curved when considering the coupled problem of poroelasticity.

APPLIED SCIENCES-BASEL (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Geochemistry and Organic Petrology of Middle Permian Source Rocks in Taibei Sag, Turpan-Hami Basin, China: Implication for Organic Matter Enrichment

Huan Miao et al.

Summary: This study focused on the organic petrology, organic geochemistry, sedimentary environment, and hydrocarbon generation potential of the Taodonggou group in the Taibei sag of the Turpan-Hami basin. The research revealed that the Middle Permian source rocks in this region have good hydrocarbon generation potential and are mainly composed of sapropelite and exinite. The study provides important theoretical guidance for the exploration of deep oil and gas resources.

ACS OMEGA (2021)

Add to Collection

Article Energy & Fuels

Effects of Fracturing Parameters on Fracture Unevenness During Large-Stage Multi-Cluster Fracturing in Horizontal Wells

Rui Yong et al.

Summary: Horizontal wells with multi-cluster fracturing technology are effective for exploiting unconventional hydrocarbon reservoirs. The study found that reducing fracture spacing increases stress interference, while reducing the number of perforations per cluster promotes more uniform fracture propagation. Increasing fluid injection intensity can lead to longer fractures but also increases unevenness.

FRONTIERS IN ENERGY RESEARCH (2021)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Complex hydraulic-fracture-network propagation in a naturally fractured reservoir

Junpeng Zou et al.

Summary: The distribution and cementation strength of pre-existing natural fractures significantly affect the formation of complex hydraulic fracture networks, and hydraulic fracture branches both restrict fracture length development and promote the formation of complex networks.

COMPUTERS AND GEOTECHNICS (2021)

Add to Collection

Review Mechanics

A review on phase-field modeling of hydraulic fracturing

Yousef Heider

Summary: This paper reviews the significant scientific works utilizing PFM to model hydraulic fracturing since 2012, covering different phase-field evolution formulations, stiffness degradation functions, crack driving forces, and methods for estimating crack aperture width. It also discusses various numerical approaches and implementations, concluding with open topics and challenges for future research.

ENGINEERING FRACTURE MECHANICS (2021)

Add to Collection

Article Energy & Fuels

Effect of different types of stimulation fluids on fracture propagation behavior in naturally fractured carbonate rock through CT scan

Bo Gou et al.

Summary: The study investigates the effect of different types of fracturing fluids on hydraulic fracture propagation in fractured carbonate rock. It finds that natural fractures and fluid types have a significant impact on fracture propagation behavior. Results show that reactive fracturing fluids are more conducive to connecting natural fractures and forming complex fracture networks during acid fracturing.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2021)

Add to Collection

Review Energy & Fuels

Recent advances in waterless fracturing technology for the petroleum industry: An overview

Li Nianyin et al.

Summary: This review discusses comprehensive waterless fracturing technologies, proposes a potential waterless fracturing technology, and provides recent field applications for intuitive understanding of the technology.

JOURNAL OF NATURAL GAS SCIENCE AND ENGINEERING (2021)

Add to Collection

Article Engineering, Geological

Characterization of Anisotropic Fracture Properties of Silurian Longmaxi Shale

L. Ren et al.

Summary: The study investigates the fracture properties of Lower Silurian Longmaxi shale by conducting three-point bend tests in three principal fracture orientations. The results show the critical shape coefficient depends on the anisotropic elasticity of the investigated shale, and using a critical shape coefficient for isotropic rock could lead to a maximum error in the calculated fracture toughness. Additionally, the mode I fracture toughness varies across different fracture orientations, with a progressive decrease in fracture energy observed.

ROCK MECHANICS AND ROCK ENGINEERING (2021)

Add to Collection

Article Engineering, Geological

On the hydraulic fracturing in naturally-layered porous media using the phase field method

Xiaoying Zhuang et al.

ENGINEERING GEOLOGY (2020)

Add to Collection

Article Computer Science, Interdisciplinary Applications

On the initiation, propagation and reorientation of simultaneously-induced multiple hydraulic fractures

Kang Duan et al.

COMPUTERS AND GEOTECHNICS (2020)

Add to Collection

Article Mechanics

Study on the interaction between hydraulic fracture and natural fracture based on extended finite element method

Heng Zheng et al.

ENGINEERING FRACTURE MECHANICS (2020)

Add to Collection

Article Engineering, Geological

Experimental and Numerical Investigation of the Effect of Bedding Layer Orientation on Fracture Toughness of Shale Rocks

Yu Suo et al.

ROCK MECHANICS AND ROCK ENGINEERING (2020)

Add to Collection

Article Energy & Fuels

Stress shadow effects and microseismic events during hydrofracturing of multiple vertical wells in tight reservoirs: A three-dimensional numerical model

Yang Ju et al.

JOURNAL OF NATURAL GAS SCIENCE AND ENGINEERING (2020)

Add to Collection

Article Engineering, Geological

Modeling of Borehole Hydraulic Fracture Initiation and Propagation with Pre-existing Cracks Using the Displacement Discontinuity Method

Wan Cheng et al.

GEOTECHNICAL AND GEOLOGICAL ENGINEERING (2020)

Add to Collection

Article Energy & Fuels

Numerical simulation of hydraulic fracture propagation in laminated shale reservoirs

Zhou Tong et al.

PETROLEUM EXPLORATION AND DEVELOPMENT (2020)

Add to Collection

Review Energy & Fuels

Laboratory characterisation of fracture compressibility for coal and shale gas reservoir rocks: A review

Yuling Tan et al.

INTERNATIONAL JOURNAL OF COAL GEOLOGY (2019)

Add to Collection

Article Energy & Fuels

Numerical investigation of multizone hydraulic fracture propagation in porous media: New insights from a phase field method

Kaichun Li et al.

JOURNAL OF NATURAL GAS SCIENCE AND ENGINEERING (2019)

Add to Collection

Article Geosciences, Multidisciplinary

Application of 3D static modeling for optimal reservoir characterization

Adewunmi O. Adelu et al.

JOURNAL OF AFRICAN EARTH SCIENCES (2019)

Add to Collection

Article Mathematics, Interdisciplinary Applications

Modeling the dynamic and quasi-static compression-shear failure of brittle materials by explicit phase field method

Tao Wang et al.

COMPUTATIONAL MECHANICS (2019)

Add to Collection

Review Energy & Fuels

Waterless fluids in hydraulic fracturing - A review

Chunkai Fu et al.

JOURNAL OF NATURAL GAS SCIENCE AND ENGINEERING (2019)

Add to Collection

Article Energy & Fuels

Study on the Interaction Mechanism of Hydraulic Fracture and Natural Fracture in Shale Formation

Heng Zheng et al.

ENERGIES (2019)

Add to Collection

Article Thermodynamics

Relationship between pore structure and mechanical properties of shale on supercritical carbon dioxide saturation

Yiyu Lu et al.

ENERGY (2019)

Add to Collection

Article Energy & Fuels

Understanding hydraulic fracture propagation behavior in tight sandstone-coal interbedded formations: an experimental investigation

Peng Tan et al.

PETROLEUM SCIENCE (2019)

Add to Collection

Article Engineering, Geological

Investigation of Influence Factors of the Fracture Toughness of Shale: A Case Study of the Longmaxi Formation Shale in Sichuan Basin, China

Jian Xiong et al.

GEOTECHNICAL AND GEOLOGICAL ENGINEERING (2019)

Add to Collection

Article Energy & Fuels

Numerical simulation of hydraulic fracture propagation in naturally fractured formations using the cohesive zone model

Arash Dahi Taleghani et al.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2018)

Add to Collection

Article Energy & Fuels

XFEM modeling of multistage hydraulic fracturing in anisotropic shale formations

Mao Sheng et al.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2018)

Add to Collection

Article Energy & Fuels

Analysis of hydraulic fracture initiation and propagation in deep shale formation with high horizontal stress difference

Bing Hou et al.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2018)

Add to Collection

Review Energy & Fuels

Numerical methods for hydraulic fracture propagation: A review of recent trends

Brice Lecampion et al.

JOURNAL OF NATURAL GAS SCIENCE AND ENGINEERING (2018)

Add to Collection

Article Energy & Fuels

Extended finite element simulation of fracture network propagation in formation containing frictional and cemented natural fractures

XiaoLong Wang et al.

JOURNAL OF NATURAL GAS SCIENCE AND ENGINEERING (2018)

Add to Collection

Article Energy & Fuels

Numerical investigation of effect of natural fractures on hydraulic-fracture propagation in unconventional reservoirs

Jun Xie et al.

JOURNAL OF NATURAL GAS SCIENCE AND ENGINEERING (2018)

Add to Collection

Article Energy & Fuels

Reservoir description and characterization of Eni field Offshore Niger Delta, southern Nigeria

Olawale Olakunle Osinowo et al.

JOURNAL OF PETROLEUM EXPLORATION AND PRODUCTION TECHNOLOGY (2018)

Add to Collection

Article Engineering, Geological

An approximate nonlinear modified Mohr-Coulomb shear strength criterion with critical state for intact rocks

Baotang Shen et al.

JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING (2018)

Add to Collection

Article Engineering, Geological

3D Numerical Modeling of the Propagation of Hydraulic Fracture at Its Intersection with Natural (Pre-existing) Fracture

Ali Naghi Dehghan et al.

ROCK MECHANICS AND ROCK ENGINEERING (2017)

Add to Collection

Article Mechanics

An XFEM-based method with reduction technique for modeling hydraulic fracture propagation in formations containing frictional natural fractures

Fang Shi et al.

ENGINEERING FRACTURE MECHANICS (2017)

Add to Collection

Article Energy & Fuels

Analysis of hydraulic fracture initiation and vertical propagation behavior in laminated shale formation

Peng Tan et al.

FUEL (2017)

Add to Collection

Article Energy & Fuels

Experimental study on fracture initiation and propagation in shale using supercritical carbon dioxide fracturing

Xinwei Zhang et al.

FUEL (2017)

Add to Collection

Article Engineering, Geological

Effect of discontinuity stress shadows on hydraulic fracture re-orientation

Qingyuan He et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2017)

Add to Collection

Article Engineering, Geological

Experimental Investigation of the Effect of Bedding Planes on Hydraulic Fracturing Under True Triaxial Stress

Bingxiang Huang et al.

ROCK MECHANICS AND ROCK ENGINEERING (2017)

Add to Collection

Article Engineering, Petroleum

Pore Compressibility of Shale Formations

Yuzheng Lan et al.

SPE JOURNAL (2017)

Add to Collection

Article Energy & Fuels

Numerical and experimental investigation of the interaction of natural and propagated hydraulic fracture

Hassan Fatahi et al.

JOURNAL OF NATURAL GAS SCIENCE AND ENGINEERING (2017)

Add to Collection

Article Energy & Fuels

Hydraulic fracture propagation geometry and acoustic emission interpretation: A case study of Silurian Longmaxi Formation shale in Sichuan Basin, SW China

Ma Xinfang et al.

PETROLEUM EXPLORATION AND DEVELOPMENT (2017)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Finite element analysis of blast-induced fracture propagation in hard rocks

Marko Bendezu et al.

COMPUTERS & STRUCTURES (2017)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Investigation of directional hydraulic fracturing based on true tri-axial experiment and finite element modeling

J. Q. Deng et al.

COMPUTERS AND GEOTECHNICS (2016)

Add to Collection

Article Energy & Fuels

Modeling and simulation of complex fracture network propagation with SRV fracturing in unconventional shale reservoirs

Long Ren et al.

JOURNAL OF NATURAL GAS SCIENCE AND ENGINEERING (2016)

Add to Collection

Article Energy & Fuels

Numerical simulation of hydraulic fracturing in orthotropic formation based on the extended finite element method

XiaoLong Wang et al.

JOURNAL OF NATURAL GAS SCIENCE AND ENGINEERING (2016)

Add to Collection

Article Geosciences, Multidisciplinary

Determination of the continuous stress-dependent permeability, compressibility and poroelasticity of shale

Marte Gutierrez et al.

MARINE AND PETROLEUM GEOLOGY (2015)

Add to Collection

Article Energy & Fuels

Reactivation mechanism of natural fractures by hydraulic fracturing in naturally fractured shale reservoirs

Wan Cheng et al.

JOURNAL OF NATURAL GAS SCIENCE AND ENGINEERING (2015)

Add to Collection

Article Engineering, Geological

The Importance of Geochemical Parameters and Shale Composition on Rock Mechanical Properties of Gas Shale Reservoirs: a Case Study From the Kockatea Shale and Carynginia Formation From the Perth Basin, Western Australia

Mohammad Mahdi Labani et al.

ROCK MECHANICS AND ROCK ENGINEERING (2015)

Add to Collection

Article Energy & Fuels

The mechanical properties of shale based on micro-indentation test

Chen Ping et al.

PETROLEUM EXPLORATION AND DEVELOPMENT (2015)

Add to Collection

Article Engineering, Multidisciplinary

A higher-order phase-field model for brittle fracture: Formulation and analysis within the isogeometric analysis framework

Michael J. Borden et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2014)

Add to Collection

Article Mechanics

A coupled finite element method for the numerical simulation of hydraulic fracturing with a condensation technique

J. Q. Bao et al.

ENGINEERING FRACTURE MECHANICS (2014)

Add to Collection

Article Energy & Fuels

Experimental study of hydraulic fracturing for shale by stimulated reservoir volume

Tiankui Guo et al.

FUEL (2014)

Add to Collection

Article Geosciences, Multidisciplinary

The composition and its impact on the methane sorption of lacustrine shales from the Upper Triassic Yanchang Formation, Ordos Basin, China

Huijuan Guo et al.

MARINE AND PETROLEUM GEOLOGY (2014)

Add to Collection

Article Engineering, Geological

Analysis of the Influence of a Natural Fracture Network on Hydraulic Fracture Propagation in Carbonate Formations

Zhiyuan Liu et al.

ROCK MECHANICS AND ROCK ENGINEERING (2014)

Add to Collection

Article Energy & Fuels

The shale characteristics and shale gas exploration prospects of the Lower Silurian Longmaxi shale, Sichuan Basin, South China

Chao Liang et al.

JOURNAL OF NATURAL GAS SCIENCE AND ENGINEERING (2014)

Add to Collection

Article Energy & Fuels

A criterion for identifying hydraulic fractures crossing natural fractures in 3D space

Cheng Wan et al.

PETROLEUM EXPLORATION AND DEVELOPMENT (2014)

Add to Collection

Article Engineering, Multidisciplinary

Coupling schemes for modeling hydraulic fracture propagation using the XFEM

Elizaveta Gordeliy et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2013)

Add to Collection

Article Engineering, Multidisciplinary

Implicit level set schemes for modeling hydraulic fractures using the XFEM

Elizaveta Gordeliy et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2013)

Add to Collection

Article Engineering, Geological

Numerical Modeling of Hydraulic Fractures Interaction in Complex Naturally Fractured Formations

Olga Kresse et al.

ROCK MECHANICS AND ROCK ENGINEERING (2013)

Add to Collection

Article Mechanics

Numerical modeling of hydraulic fracture problem in permeable medium using cohesive zone model

Benoit Carrier et al.

ENGINEERING FRACTURE MECHANICS (2012)

Add to Collection

Article Engineering, Petroleum

Parameters Affecting the Interaction Among Closely Spaced Hydraulic Fractures

A. P. Bunger et al.

SPE JOURNAL (2012)

Add to Collection

Article Engineering, Geological

A fixed grid algorithm for simulating the propagation of a shallow hydraulic fracture with a fluid lag

E. Gordeliy et al.

INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS (2011)

Add to Collection

Article Engineering, Petroleum

Numerical Modeling of Multistranded-Hydraulic-Fracture Propagation: Accounting for the Interaction Between Induced and Natural Fractures

Arash Dahi-Taleghani et al.

SPE JOURNAL (2011)

Add to Collection

Article Engineering, Geological

Analysis of fracture propagation behavior and fracture geometry using a tri-axial fracturing system in naturally fractured reservoirs

Jian Zhou et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2008)

Add to Collection

Review Engineering, Geological

Computer simulation of hydraulic fractures

A. Adachi et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2007)

Add to Collection

Article Materials Science, Multidisciplinary

Modelling cohesive crack growth using a two-step finite element-scaled boundary finite element coupled method

Z. J. Yang et al.

INTERNATIONAL JOURNAL OF FRACTURE (2007)

Add to Collection

Article Materials Science, Multidisciplinary

Toughness-dominated hydraulic fracture with leak-off

AP Bunger et al.

INTERNATIONAL JOURNAL OF FRACTURE (2005)

Add to Collection

© Peeref 2019-2024. All rights reserved.