4.5 Article

Intense Pulsed Light Welding Process with Mechanical Roll-Pressing for Highly Conductive Silver Nanowire Transparent Electrode

Related references

Note: Only part of the references are listed.
Article Nanoscience & Nanotechnology

Flexible silver nanowire dry electrodes for long-term electrocardiographic monitoring

Kun Huang et al.

Summary: The newly developed AgPHPUS ECG electrode has a unique structure, with good flexibility and stability, accurately collecting ECG signals during long-term and repeated use.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2022)

Article Nanoscience & Nanotechnology

Aqueous flexible all-solid-state NiCo-Zn batteries with high capacity based on advanced ion-buffering reservoirs of NiCo2O4

Changwei Lai et al.

Summary: The newly developed DBS-fNiCo(2)O(4) cathodes for aqueous rechargeable Ni//Zn batteries demonstrate high specific capacity and a wide operating potential window. Additionally, the flexible all-solid-state NiCo-Zn batteries with PVA-KOH membrane show excellent electrochemical performance under different bending states and temperatures, laying the foundation for further potential applications.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2022)

Article Nanoscience & Nanotechnology

Vertically Aligned Silicon Carbide Nanowires/ Boron Nitride Cellulose Aerogel Networks Enhanced Thermal Conductivity and Electromagnetic Absorbing of Epoxy Composites

Duo Pan et al.

Summary: A cellulose aerogel with highly enhanced thermal conductivity was successfully obtained by constructing a vertically aligned silicon carbide nanowires/boron nitride network. The composite exhibited significantly increased thermal conductivity compared to pure epoxy, both in vertical and horizontal directions. Additionally, it showed good electrical insulation and excellent electromagnetic wave absorption performance.

NANO-MICRO LETTERS (2022)

Review Nanoscience & Nanotechnology

Recent progress in cathode catalyst for nonaqueous lithium oxygen batteries: a review

Congcong Dang et al.

Summary: Lithium-oxygen (Li-O-2) battery is a potential candidate for next-generation commercial batteries due to its high theoretical capacity and energy density. However, its practical electrochemical performance faces obstacles such as low discharge capacity, poor rate capability, high overpotential, and unstable cycle lifespan. This review summarizes the recent advances in the design and preparation of cathode materials for Li-O-2 batteries. It discusses the reaction mechanism, component design, structure-property relationship, and attempts to improve the electrochemical properties of Li-O-2 batteries electrode materials.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2022)

Article Nanoscience & Nanotechnology

Flexible, yet robust polyaniline coated foamed polylactic acid composite electrodes for high-performance supercapacitors

Guixing Li et al.

Summary: Polylactic acid (PLA) shows promising potential for electronic applications due to its biodegradability and biocompatibility. This study introduces a facile approach to prepare flexible and robust electrodes of polyaniline coated on foamed PLA (PANI-fo-PLA), which significantly improves energy storage performance.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2022)

Article Engineering, Chemical

An efficient bifunctional Ni-Nb2O5 nanocatalysts for the hydrodeoxygenation of anisole

Juan Xu et al.

Summary: The Ni-Nb2O5 nanocatalysts prepared by the sol-gel method were investigated for their catalytic hydrodeoxy-genation (HDO) performance of anisole. The addition of Nb2O5 increased the acidity of the catalyst and promoted Ni dispersion, but a high niobium content resulted in the formation of an inactive Nb-Ni-O mixed phase. By adjusting the Nb/Ni molar ratio, the size and morphology of Ni grains in the catalysts were varied. Among the catalysts prepared at different Nb/Ni molar ratios, the Ni0.9Nb0.1 sample showed the largest surface area, mainly composed of spherical nanoparticles and crack pores. The Ni0.9Nb0.1 catalyst exhibited higher HDO performance for anisole and higher selectivity to cyclohexane compared to Ni catalysts. The selectivity of cyclohexane increased with the increase of reaction temperature, reaching almost complete conversion of anisole to cyclohexane at 240 degrees C, 3 MPa H-2, and 4 hours.

CHINESE JOURNAL OF CHEMICAL ENGINEERING (2022)

Article Materials Science, Multidisciplinary

Highly transmitted silver nanowires-SWCNTs conductive flexible film by nested density structure and aluminum-doped zinc oxide capping layer for flexible amorphous silicon solar cells

Shunliang Gao et al.

Summary: This study developed a novel architecture of composite transparent conductive films (TCFs) by fabricating silver nanowires-SWCNTs films using ultrasonic spraying technology and capping it with aluminum-doped zinc oxide (AZO) for enhanced optical properties. The optimized ASA bilayer structure demonstrated superior optoelectronic performance and potential to replace traditional ITO.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Article Nanoscience & Nanotechnology

Flexible barium titanate@polydopamine/polyvinylidene fluoride/polymethyl methacrylate nanocomposite films with high performance energy storage

Yan Wang et al.

Summary: The introduction of high-permittivity inorganic ceramic materials into organic polymer-based dielectric materials can effectively increase the energy density and electrical properties of film capacitors.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2022)

Article Nanoscience & Nanotechnology

Honeycomb-like nitrogen-doped porous carbon decorated with Co3O4 nanoparticles for superior electrochemical performance pseudo-capacitive lithium storage and supercapacitors

Wenyue Yang et al.

Summary: The three-dimensional honeycomb-like N-doped porous carbon networks decorated with tricobalt tetraoxide nanoparticles (N-CN/Co3O4) showed excellent electrochemical performance as electrodes for lithium storage and supercapacitors, due to the unique designed configuration and optimized surface activity.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2022)

Review Green & Sustainable Science & Technology

A Review on Intense Pulsed Light Sintering Technologies for Conductive Electrodes in Printed Electronics

Yong-Rae Jang et al.

Summary: Intense pulsed light (IPL) technology allows for quick heating of materials to create conductive layers, without damage to low temperature substrates, in ambient conditions and room temperature.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2021)

Article Nanoscience & Nanotechnology

Polydopamine-coated chitosan hydrogel beads for synthesis and immobilization of silver nanoparticles to simultaneously enhance antimicrobial activity and adsorption kinetics

Taoran Wang et al.

Summary: In this study, chitosan-based hydrogel beads immobilized with silver nanoparticles were prepared to enhance antimicrobial and adsorption activity, showing potential for controlling both chemical and biological contaminants in wastewater. The presence of AgNPs improved the adsorption capacity of the beads and exhibited higher antimicrobial activity against Gram-negative bacteria compared to Gram-positive bacteria.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2021)

Review Nanoscience & Nanotechnology

Recent advances in transition metal oxides with different dimensions as electrodes for high-performance supercapacitors

Yongpeng Ma et al.

Summary: This study summarizes recent advances in transition metal oxides as electrodes for high-performance supercapacitors in different dimensions, highlighting the importance of the relationship between structure and property in designing and synthesizing high-performance transition metal oxide-based supercapacitor electrodes.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2021)

Article Nanoscience & Nanotechnology

Ultrathin flexible poly(vinylidene fluoride)/MXene/silver nanowire film with outstanding specific EMI shielding and high heat dissipation

Haoran Cheng et al.

Summary: The study prepared ultrathin flexible poly(vinylidene fluoride) (PVDF) composite films with MXenes and silver nanowires (AgNWs) through a solution casting method, showing enhanced electrical and thermal conductivity as well as EMI shielding compared to PVDF/MXene and PVDF/AgNW films. The main EMI shielding mechanism is absorption, and possible synergistic mechanisms for enhancing EMI shielding and mechanical performance are discussed. This work provides a promising solution for EMI shielding challenges in modern smaller wearable devices.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2021)

Article Nanoscience & Nanotechnology

Flexible thermally conductive and electrically insulating silicone rubber composite films with BNNS@Al2O3 fillers

Han Yan et al.

Summary: In this study, thermally conductive fillers with high thermal conductivity coefficients were prepared by combining alumina with boron nitride nanosheets, which were used to create flexible thermally conductive and electrically insulating composite films. These films exhibited excellent thermal conductivity and mechanical properties.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2021)

Article Materials Science, Multidisciplinary

Flexible perovskite solar cells based on AgNW/ATO composite transparent electrodes

Sangmo Jon et al.

SYNTHETIC METALS (2020)

Article Chemistry, Multidisciplinary

Effect of the Degree of the Gate-Dielectric Surface Roughness on the Performance of Bottom-Gate Organic Thin-Film Transistors

Michael Geiger et al.

ADVANCED MATERIALS INTERFACES (2020)

Article Materials Science, Multidisciplinary

Optical properties of silver nanowire/polymer composite films: absorption, scattering, and color difference

Takeo Tomiyama et al.

OPTICAL MATERIALS EXPRESS (2020)

Article Nanoscience & Nanotechnology

Mechanical characterization of soft substrates for wearable and washable electronic systems

S. de Mulatier et al.

APL MATERIALS (2019)

Review Materials Science, Multidisciplinary

Flexible Transparent Electrodes Based on Silver Nanowires: Material Synthesis, Fabrication, Performance, and Applications

Yuwen Zhu et al.

ADVANCED MATERIALS TECHNOLOGIES (2019)

Article Nanoscience & Nanotechnology

Selective Wavelength Plasmonic Flash Light Welding of Silver Nanowires for Transparent Electrodes with High Conductivity

Yong -Rae Jang et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Article Chemistry, Analytical

InGaZnO transistor based on porous Ag nanowire-functionalized gate electrode for detection of bio-relevant molecules

Tae-Hee Yoo et al.

SENSORS AND ACTUATORS B-CHEMICAL (2018)

Article Materials Science, Multidisciplinary

Improving light extraction of flexible OLEDs using a mechanically robust Ag mesh/ITO composite electrode and microlens array

So-Ra Shin et al.

JOURNAL OF MATERIALS CHEMISTRY C (2018)

Article Chemistry, Multidisciplinary

Electrohydrodynamic NanoDrip Printing of High Aspect Ratio Metal Grid Transparent Electrodes

Julian Schneider et al.

ADVANCED FUNCTIONAL MATERIALS (2016)

Article Chemistry, Multidisciplinary

Metal Nanowire Networks: The Next Generation of Transparent Conductors

Shengrong Ye et al.

ADVANCED MATERIALS (2014)

Article Nanoscience & Nanotechnology

Thermal annealing effects on silver nanowire networks

G. Giusti et al.

INTERNATIONAL JOURNAL OF NANOTECHNOLOGY (2014)

Article Chemistry, Multidisciplinary

Flexible Graphene Electrode-Based Organic Photovoltaics with Record-High Efficiency

Hyesung Park et al.

NANO LETTERS (2014)

Article Nanoscience & Nanotechnology

Rolling Silver Nanowire Electrodes: Simultaneously Addressing Adhesion, Roughness, and Conductivity

Tate C. Hauger et al.

ACS APPLIED MATERIALS & INTERFACES (2013)

Article Chemistry, Multidisciplinary

Uniformly Interconnected Silver-Nanowire Networks for Transparent Film Heaters

TaeYoung Kim et al.

ADVANCED FUNCTIONAL MATERIALS (2013)

Article Chemistry, Multidisciplinary

Efficient Welding of Silver Nanowire Networks without Post-Processing

Jaemin Lee et al.

SMALL (2013)

Review Engineering, Biomedical

Flexible and Stretchable Electronics for Biointegrated Devices

Dae-Hyeong Kim et al.

ANNUAL REVIEW OF BIOMEDICAL ENGINEERING, VOL 14 (2012)

Article Chemistry, Physical

Self-limited plasmonic welding of silver nanowire junctions

Erik C. Garnett et al.

NATURE MATERIALS (2012)

Article Materials Science, Multidisciplinary

Silver nanowire-polymer composite electrode for high performance solution-processed thin-film transistors

Liang-Hsiang Chen et al.

ORGANIC ELECTRONICS (2012)

Article Chemistry, Multidisciplinary

Low-Power Flexible Organic Light-Emitting Diode Display Device

Sunkook Kim et al.

ADVANCED MATERIALS (2011)

Article Chemistry, Physical

Fabrication of silver nanowire transparent electrodes at room temperature

Takehiro Tokuno et al.

NANO RESEARCH (2011)

Article Physics, Applied

Metal grid/conducting polymer hybrid transparent electrode for inverted polymer solar cells

Jingyu Zou et al.

APPLIED PHYSICS LETTERS (2010)

Article Physics, Applied

Heat generation in plasmonic nanostructures: Influence of morphology

G. Baffou et al.

APPLIED PHYSICS LETTERS (2009)

Article Chemistry, Physical

Effect of surface roughness on the optical properties of multilayer polymer films

A Larena et al.

APPLIED SURFACE SCIENCE (2002)