☆ 4.5 Article

Dithieno[2,3-e:3′,2′-g]isoindole-7,9(8H)-Dione and Dithieno[3′,2′:5,6;2,3:7,8]naphtho[2,3-d]imidazol-9(10H)-One-Based Wide Bandgap Copolymer for Efficient Polymer Solar Cells

ENERGY TECHNOLOGY (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Multidisciplinary

Realizing 19.05% Efficiency Polymer Solar Cells by Progressively Improving Charge Extraction and Suppressing Charge Recombination

Kaien Chong et al.

Summary: This work demonstrates highly efficient polymer solar cells by improving charge extraction and suppressing charge recombination through side-chain engineering, adopting ternary blends, and introducing volatilizable solid additives. The optimized molecular structure and blend morphology lead to improved fill factor and power conversion efficiency.

ADVANCED MATERIALS (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Printing fabrication of large-area non-fullerene organic solar cells

Peiyao Xue et al.

Summary: Organic solar cells (OSCs) based on a bulk heterojunction structure have inherent advantages, but face efficiency loss challenges when scaling up to large areas. Research on large-area OSCs using non-fullerene acceptors has increased recently. Fabrication technology, equipment development, and device component processing strategy are crucial in upscaling OSCs.

MATERIALS HORIZONS (2022)

Add to Collection

Article Chemistry, Physical

Tandem Organic Solar Cell with 20.2% Efficiency

Zhong Zheng et al.

Summary: A advanced interconnecting layer for tandem organic solar cell is developed in this study. By controlling the O-2 flux during evaporation, efficient electron extraction and low Schottky barrier are obtained, enabling effective charge recombination between two subcells. The tandem cell with the interconnecting layer shows a high efficiency of 20.27%.

JOULE (2022)

Add to Collection

Article Chemistry, Physical

High fill factor organic solar cells with increased dielectric constant and molecular packing density

Xuning Zhang et al.

Summary: This study reveals the impact of dielectric properties on the fill factor and photovoltaic efficiency of organic solar cells. By increasing the molecular packing density and dielectric constant, the fill factor and efficiency can be improved.

JOULE (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Single-Junction Organic Solar Cells with 19.17% Efficiency Enabled by Introducing One Asymmetric Guest Acceptor

Rui Sun et al.

Summary: The ternary strategy is an effective approach to achieve high-efficiency OSCs, but the nonradiative voltage loss limits further efficiency improvements. By incorporating an asymmetric guest acceptor BTP-2F2Cl, the OSCs show improved photoluminescence quantum yield, exciton diffusion length, and absorption spectrum, leading to enhanced power conversion efficiency.

ADVANCED MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

n-Doping of photoactive layer in binary organic solar cells realizes over 18.3% efficiency

Danqin Li et al.

Summary: In this study, an organic solar cell was developed with improved power conversion efficiency by doping DMBI-BDZC into the photoactive layer. The doped layer exhibited enhanced carrier mobilities, effective exciton dissociation, longer carrier lifetime, and suppressed charge recombination.

NANO ENERGY (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Benzo[1,2-b:4,5-b′]dithiophene-Based Conjugated Polymers for Highly Efficient Organic Photovoltaics

Cunbin An et al.

Summary: In recent years, advancements in photovoltaic materials, particularly polymer donors and nonfullerene acceptors, have greatly increased the power conversion efficiencies of bulk heterojunction single-junction organic photovoltaic cells. The rational design of polymer donors is crucial for achieving high efficiencies by ensuring matching energy levels and absorption spectra with nonfullerene acceptors, as well as optimizing the morphology and electroluminescence quantum efficiency of the cells. Among various polymer donors, benzo[1,2-b:4,5-b']dithiophene-containing conjugated polymers have shown promising results. This review emphasizes the molecular design strategies of these polymer donors and discusses their impact on the photovoltaic efficiencies of organic photovoltaic cells.

ACCOUNTS OF MATERIALS RESEARCH (2022)

Add to Collection

Article Chemistry, Physical

18.42% efficiency polymer solar cells enabled by terpolymer donors with optimal miscibility and energy levels

Zhihui Liao et al.

Summary: Researchers synthesized a series of terpolymer donors with varying fractions of ester-substituted thiazole (E-Tz) units using random ternary copolymerization. They found that fine-tuning the E-Tz content can optimize the energy levels, electrostatic potentials, molecular aggregation, miscibility, and morphology, resulting in improved performance parameters for photovoltaic devices.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Add to Collection

Article Chemistry, Multidisciplinary

On the Understandings of Dielectric Constant and Its Impacts on the Photovoltaic Efficiency in Organic Solar Cells

Zihao Fu et al.

Summary: Dielectric constant is a crucial parameter affecting the power conversion efficiency of organic solar cells, and increasing ε of bulk heterojunctions can reduce the impact of charge-transfer states and bimolecular recombination on OSC performance. Current understandings on the impacts of ε on exciton dissociation and voltage losses in OSCs are well-established, with efforts to modify the dielectric properties of OSC materials ongoing through synthetic approaches.

CHINESE JOURNAL OF CHEMISTRY (2021)

Add to Collection

Article Physics, Condensed Matter

Post-sulphuration enhances the performance of a lactone polymer donor

Yufan Jiang et al.

JOURNAL OF SEMICONDUCTORS (2021)

Add to Collection

Article Physics, Condensed Matter

18.69% PCE from organic solar cells

Ke Jin et al.

JOURNAL OF SEMICONDUCTORS (2021)

Add to Collection

Article Chemistry, Physical

Organic Solar Cells-The Path to Commercial Success

Moritz Riede et al.

Summary: Organic solar cells have the potential to be the cheapest form of electricity, surpassing silicon photovoltaics. However, challenges remain in increasing efficiency and long-term stability. The technology could be used in building integrated photovoltaics and portable electronics, with the potential to have the lowest carbon footprint of all energy generation technologies.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

A Quinoxaline-Based D-A Copolymer Donor Achieving 17.62% Efficiency of Organic Solar Cells

Can Zhu et al.

Summary: Side-chain engineering is a crucial strategy for enhancing the power conversion efficiency of organic solar cells. In this study, two copolymers were designed and synthesized, with PBQ6 exhibiting superior performance and achieving a high efficiency of 17.62% for organic solar cells.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Synergistic Effect of Dielectric Property and Energy Transfer on Charge Separation in Non-Fullerene-Based Solar Cells

Pandeng Li et al.

Summary: In this study, a modified approach was developed to estimate the dielectric constants of PM6 donor and non-fullerene acceptors, revealing higher dielectric constants in most non-fullerene acceptors and blend films, along with significant differences in dielectric constants at optical frequencies. These results are likely associated with reduced exciton binding energy and bimolecular recombination. Furthermore, the overlap between the emission spectrum of the donor and absorption spectrum of the non-fullerene acceptors facilitates energy transfer and efficient charge separation, suggesting a synergistic effect contributing to the physical working mechanism in non-fullerene-based photovoltaic devices.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Article Chemistry, Physical

Flexible organic solar cells: Materials, large-area fabrication techniques and potential applications

Chunhui Liu et al.

Summary: Organic solar cells (OSCs) have achieved power conversion efficiencies (PCEs) over 18% through continuous research, demonstrating flexibility for special applications. Flexible OSCs (F-OSCs) have made progress in materials, fabrication techniques, and applications, achieving PCEs over 15% but still facing challenges.

NANO ENERGY (2021)

Add to Collection

Article Physics, Condensed Matter

A wide-bandgap copolymer donor with a 5-methyl-4H-dithieno[3,2-e:2′,3′-g]isoindole-4,6(5H)-dione unit

Anxin Sun et al.

JOURNAL OF SEMICONDUCTORS (2021)

Add to Collection

Article Chemistry, Physical

High-performance and eco-friendly semitransparent organic solar cells for greenhouse applications

Di Wang et al.

Summary: This study developed high-performance spectrally engineered semitransparent organic solar cells using green fabrication methods for greenhouse applications. Empowered by the newly designed quaternary blends, the solar cells achieved excellent power conversion efficiency and maintained good photovoltaic properties during fabrication with non-halogenated solvents to meet the needs of plant photon absorption.

JOULE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Nanographene-Osmapentalyne Complexes as a Cathode Interlayer in Organic Solar Cells Enhance Efficiency over 18%

Longzhu Liu et al.

Summary: Interface engineering through conjugated extension of metal-nanographene molecules as cathode interlayer materials has successfully enhanced the photovoltaic performance of nonfullerene solar cells. Modified hexabenzocoronenes-styryl can effectively improve the performance of organic solar cells by facilitating carrier transport and impeding carrier recombination through better interfacial contacts and morphology regulation.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

High-performance polymer solar cells with efficiency over 18% enabled by asymmetric side chain engineering of non-fullerene acceptors

Shihao Chen et al.

Summary: The research suggests that asymmetric side-chain engineering can effectively tune the properties of non-fullerene small-molecule acceptors (NFSMAs) and improve the power conversion efficiency for binary non-fullerene polymer solar cells (NFPSCs). Introducing proper asymmetric side chains in NFSMAs can induce favorable face-on molecule orientation, enhance carrier mobilities, balance charge transport, and reduce recombination losses, leading to improved overall performance in NFPSCs.

SCIENCE CHINA-CHEMISTRY (2021)

Add to Collection

Article Multidisciplinary Sciences

Light intensity dependence of organic solar cell operation and dominance switching between Shockley-Read-Hall and bimolecular recombination losses

Shinyoung Ryu et al.

Summary: The study found systematic variations in the J-V characteristics of organic solar cells under different light intensities. Through simulation studies, researchers were able to separate current losses into SRH and bimolecular recombination components, with competition between these currents responsible for variations in J(sc), V-oc, and FF.

SCIENTIFIC REPORTS (2021)

Add to Collection

Article Chemistry, Physical

Reduced non-radiative charge recombination enables organic photovoltaic cell approaching 19% efficiency

Pengqing Bi et al.

Summary: Introducing HDO-4Cl increased the exciton diffusion length in the acceptor phase, reducing non-radiative charge recombination and improving photon utilization efficiency in PBDB-TF: eC9-based OPV cells. This led to achieving a high-efficiency OPV cell with outstanding power conversion efficiency, demonstrating the effectiveness of regulating exciton behaviors in reducing energy loss.

JOULE (2021)

Add to Collection

Review Nanoscience & Nanotechnology

Flexible Organic Solar Cells: Progress and Challenges

Yanna Sun et al.

Summary: Compared with inorganic photovoltaics, organic solar cells have the advantage of flexibility, but their power conversion efficiencies still need to be improved through optimization of electrodes, materials, and device structure.

SMALL SCIENCE (2021)

Add to Collection

Article Physics, Condensed Matter

A chlorinated copolymer donor demonstrates a 18.13% power conversion efficiency

Jianqiang Qin et al.

JOURNAL OF SEMICONDUCTORS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

High Efficiency Polymer Solar Cells with Efficient Hole Transfer at Zero Highest Occupied Molecular Orbital Offset between Methylated Polymer Donor and Brominated Acceptor

Chenkai Sun et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

Add to Collection

Article Multidisciplinary Sciences

18% Efficiency organic solar cells

Qishi Liu et al.

SCIENCE BULLETIN (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Progress of the key materials for organic solar cells

Yang Tong et al.

SCIENCE CHINA-CHEMISTRY (2020)

Add to Collection

Editorial Material Multidisciplinary Sciences

The new era for organic solar cells: polymer donors

Chunhui Duan et al.

SCIENCE BULLETIN (2020)

Add to Collection

Article Multidisciplinary Sciences

Space-charge-limited electron and hole currents in hybrid organic-inorganic perovskites

Mohammad Sajedi Alvar et al.

NATURE COMMUNICATIONS (2020)

Add to Collection

Editorial Material Multidisciplinary Sciences

Over 16% efficiency from thick-film organic solar cells

Jianqiang Qin et al.

SCIENCE BULLETIN (2020)

Add to Collection

Article Energy & Fuels

New Conjugated Polymers Based on Dithieno[2,3-e:3′,2′-g]Isoindole-7,9(8H)-Dione Derivatives for Applications in Nonfullerene Polymer Solar Cells

Mukhamed L. Keshtov et al.

SOLAR RRL (2020)

Add to Collection

Article Chemistry, Physical

Synthesis and Photovoltaic Investigation of 8,10-Bis(2-octyldodecyl)-8,10-dihydro-9H-bisthieno[2′,3′:7,8;3,2:5,6] naphtho[2,3-d]imidazol-9-one Based Conjugated Polymers Using a Nonfullerene Acceptor

Mukhamed L. Keshtov et al.

ACS APPLIED ENERGY MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Achieving over 16% efficiency for single-junction organic solar cells

Baobing Fan et al.

SCIENCE CHINA-CHEMISTRY (2019)

Add to Collection

Article Polymer Science

What can we learn from model systems: Impact of polymer backbone structure on performance and stability of organic photovoltaics

Alexander Akkuratov et al.

POLYMER (2019)

Add to Collection

Editorial Material Multidisciplinary Sciences

Thiolactone copolymer donor gifts organic solar cells a 16.72% efficiency

Ji Xiong et al.

SCIENCE BULLETIN (2019)

Add to Collection

Article Multidisciplinary Sciences

Revealing the Critical Role of the HOMO Alignment on Maximizing Current Extraction and Suppressing Energy Loss in Organic Solar Cells

Jianyun Zhang et al.

ISCIENCE (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Improved Efficiency of Polymer Solar Cells by Modifying the Side Chain of Wide-Band Gap Conjugated Polymers Containing Pyrrolo[3,4-f]benzotriazole-5,7(6H)-dione Moiety

Peng Zhu et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Determining the Dielectric Constants of Organic Photovoltaic Materials Using Impedance Spectroscopy

Michael P. Hughes et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Over 14% Efficiency in Polymer Solar Cells Enabled by a Chlorinated Polymer Donor

Shaoqing Zhang et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Multidisciplinary Sciences

A low cost and high performance polymer donor material for polymer solar cells

Chenkai Sun et al.

NATURE COMMUNICATIONS (2018)

Add to Collection

Article Chemistry, Physical

Exciton Binding Energies of Nonfullerene Small Molecule Acceptors: Implication for Exciton Dissociation Driving Forces in Organic Solar Cells

Lingyun Zhu et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Donor Conjugated Polymers with Polar Side Chain Groups: The Role of Dielectric Constant and Energetic Disorder on Photovoltaic Performance

Bing Xu et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Efficient Nonfullerene Organic Solar Cells with Small Driving Forces for Both Hole and Electron Transfer

Shangshang Chen et al.

ADVANCED MATERIALS (2018)

Add to Collection

Review Chemistry, Physical

High dielectric constant conjugated materials for organic photovoltaics

Jeroen Brebels et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Constructing D-A copolymers based on thiophene-fused benzotriazole units containing different alkyl side-chains for non-fullerene polymer solar cells

Xiu Jiang et al.

JOURNAL OF MATERIALS CHEMISTRY C (2017)

Add to Collection

Review Chemistry, Multidisciplinary

Molecular Design of Benzodithiophene-Based Organic Photovoltaic Materials

Huifeng Yao et al.

CHEMICAL REVIEWS (2016)

Add to Collection

Article Polymer Science

A heptacyclic acceptor unit developed for D-A copolymers used in polymer solar cells

Jiamin Cao et al.

POLYMER CHEMISTRY (2016)

Add to Collection

Article Chemistry, Multidisciplinary

A Large-Bandgap Conjugated Polymer for Versatile Photovoltaic Applications with High Performance

Maojie Zhang et al.

ADVANCED MATERIALS (2015)

Add to Collection

Article Chemistry, Physical

High-performance inverted PThTPTI:PC71BM solar cells

Hui Li et al.

NANO ENERGY (2015)

Add to Collection

Review Chemistry, Multidisciplinary

Bulk Heterojunction Solar Cells: Morphology and Performance Relationships

Ye Huang et al.

CHEMICAL REVIEWS (2014)

Add to Collection

Article Chemistry, Physical

Thiophene-Fused Benzothiadiazole: A Strong Electron-Acceptor Unit to Build D-A Copolymer for Highly Efficient Polymer Solar Cells

Pengcheng Zhou et al.

CHEMISTRY OF MATERIALS (2014)

Add to Collection

Article Polymer Science

A Fused-Ring Acceptor Unit in D-A Copolymers Benefits Photovoltaic Performance

Chuantian Zuo et al.

MACROMOLECULAR RAPID COMMUNICATIONS (2014)

Add to Collection

Article Chemistry, Physical

High-Dielectric Constant Side-Chain Polymers Show Reduced Non-Geminate Recombination in Heterojunction Solar Cells

Namchul Cho et al.

ADVANCED ENERGY MATERIALS (2014)

Add to Collection

Review Polymer Science

Designing π-conjugated polymers for organic electronics

Xin Guo et al.

PROGRESS IN POLYMER SCIENCE (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Fluorine substituted thiophene-quinoxaline copolymer to reduce the HOMO level and increase the dielectric constant for high open-circuit voltage organic solar cells

Yunzhang Lu et al.

JOURNAL OF MATERIALS CHEMISTRY C (2013)

Add to Collection

Article Polymer Science

Rational Design of High Performance Conjugated Polymers for Organic Solar Cells

Huaxing Zhou et al.

MACROMOLECULES (2012)

Add to Collection

Article Chemistry, Multidisciplinary

Simultaneous Enhancement of Open-Circuit Voltage, Short-Circuit Current Density, and Fill Factor in Polymer Solar Cells

Zhicai He et al.

ADVANCED MATERIALS (2011)

Add to Collection

Article Physics, Applied

Effect of self-organization in polymer/fullerene bulk heterojunctions on solar cell performance

Vishal Shrotriya et al.

APPLIED PHYSICS LETTERS (2006)

Add to Collection

Article Physics, Applied

Light intensity dependence of open-circuit voltage of polymer:fullerene solar cells -: art. no. 123509

LJA Koster et al.

APPLIED PHYSICS LETTERS (2005)

Add to Collection

Article Chemistry, Multidisciplinary

Effect of temperature and illumination on the electrical characteristics of polymer-fullerene bulk-heterojunction solar cells

I Riedel et al.

ADVANCED FUNCTIONAL MATERIALS (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.