4.5 Article

Efficient and Stable Carbon-Based All-Inorganic CsPbIBr2 Perovskite Solar Cells Obtained via Treatment by Biological Active Substance Additive

Related references

Note: Only part of the references are listed.
Article Engineering, Environmental

Healing soft interface for stable and high-efficiency all-inorganic CsPbIBr2 perovskite solar cells enabled by S-benzylisothiourea hydrochloride

Furi Yan et al.

Summary: In this study, a facile method to strengthen and passivate the inorganic CsPbIBr2 PSC surface with a multifunctional S-benzylisothiourea hydrochloride (SBTCl) was reported. The treatment significantly reduced detrimental defects and improved long-term air-stability, resulting in higher efficiency and stability in 50% RH conditions.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Chemistry, Multidisciplinary

Phase Control of Cs-Pb-Br Derivatives to Suppress 0D Cs4PbBr6 for High-Efficiency and Stable All-Inorganic CsPbBr3 Perovskite Solar Cells

Jingwei Zhu et al.

Summary: Precise phase control of Cs-Pb-Br derivatives and utilizing 2D transition metal dichalcogenide ReSe2 for interfacial charge extraction are effective strategies to enhance the photovoltaic performance of CsPbBr3 perovskite solar cells. This work provides a deep understanding of the phase control and the impact of derivatives on the photovoltaic performance of advanced CsPbBr3 PSCs.

SMALL (2022)

Article Chemistry, Multidisciplinary

Universal Dynamic Liquid Interface for Healing Perovskite Solar Cells

Qiyao Guo et al.

Summary: This study presents a dynamic healing interface (DHI) for highly efficient and stable perovskite solar cells (PSCs) by incorporating a low-melting-point small molecule onto the perovskite film surface. The solid-to-liquid phase conversion of DHI enhances charge extraction, passivates defects, and suppresses ion migration. Furthermore, the stability of PSCs is remarkably improved under various environmental conditions.

ADVANCED MATERIALS (2022)

Article Engineering, Environmental

Multifunctional interface modifier ammonium silicofluoride for efficient and stable all-inorganic CsPbBr3 perovskite solar cells

Lifang Cui et al.

Summary: The utilization of ammonium silicofluoride as an interfacial modifier in perovskite solar cells significantly improves efficiency and stability by reducing surface defects, adjusting energy levels, and forming hydrogen bonds.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Chemistry, Physical

PbS/CdS heterojunction thin layer affords high-performance carbon-based all-inorganic solar cells

Yuan Xu et al.

Summary: In this study, a PbS/CdS heterojunction thin layer was constructed through interface engineering, which successfully improved the stability and efficiency of carbon-based CsPbI1.5Br1.5 solar cells.

NANO ENERGY (2022)

Article Chemistry, Multidisciplinary

p-Type Charge Transfer Doping of Graphene Oxide with (NiCo)1-yFeyOx for Air-Stable, All-Inorganic CsPbIBr2 Perovskite Solar Cells

Jian Du et al.

Summary: By utilizing (NiCo)(1-y)FeyOx nanoparticle decorated graphene oxide (GO), the efficiency of all-inorganic CsPbIBr2 PSC was significantly improved, resolving the contradiction between charge extraction and localization. The top device exhibited excellent long-term stability under 10% relative humidity without encapsulation for over 70 days.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Article Chemistry, Multidisciplinary

Electrical Loss Management by Molecularly Manipulating Dopant-free Poly(3-hexylthiophene) towards 16.93 % CsPbI2Br Solar Cells

Ming-Hua Li et al.

Summary: By manipulating the interaction between the polymer and small molecule, a strategy for managing electrical losses in inorganic cesium lead halide perovskite solar cells was developed, significantly increasing carrier mobility and reducing surface defect density, while also improving stability.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Article Nanoscience & Nanotechnology

A Special Additive Enables All Cations and Anions Passivation for Stable Perovskite Solar Cells with Efficiency over 23%

Wenjing Zhao et al.

Summary: By using the BBF complex as an additive, passivation of both cation and anion defects in perovskite films was achieved, reducing trap density and recombination processes, improving crystalline quality, and enhancing energy-level alignment, leading to higher power conversion efficiency and stability for perovskite solar cells.

NANO-MICRO LETTERS (2021)

Article Chemistry, Multidisciplinary

Spontaneous interface engineering for dopant-free poly(3-hexylthiophene) perovskite solar cells with efficiency over 24%

Min Ju Jeong et al.

Summary: By incorporating gallium(iii) acetylacetonate into organic hole-transporting materials without additional surface treatment processes, the interface engineering strategy efficiently reduces the recombination loss and enhances the performance of perovskite solar cells. This method significantly improves the power conversion efficiency of PSCs and maintains stability without hygroscopic additives, showing a promising route for high performance and commercialization.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Article Chemistry, Multidisciplinary

Controlled n-Doping in Air-Stable CsPbI2Br Perovskite Solar Cells with a Record Efficiency of 16.79%

Yu Han et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Review Chemistry, Physical

Inorganic Halide Perovskite Solar Cells: Progress and Challenges

Jingjing Tian et al.

ADVANCED ENERGY MATERIALS (2020)

Article Chemistry, Physical

Dual Function of Surface Alkali-Gas Erosion on SnO2 for Efficient and Stable Perovskite Solar Cells

Hao Huang et al.

ACS APPLIED ENERGY MATERIALS (2020)

Article Materials Science, Multidisciplinary

CoBr2-doping-induced efficiency improvement of CsPbBr3 planar perovskite solar cells

Deng Wang et al.

JOURNAL OF MATERIALS CHEMISTRY C (2020)

Review Chemistry, Multidisciplinary

All-Inorganic CsPbX3 Perovskite Solar Cells: Progress and Prospects

Jingru Zhang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Article Chemistry, Multidisciplinary

Tailoring Passivation Molecular Structures for Extremely Small Open-Circuit Voltage Loss in Perovskite Solar Cells

Shuang Yang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

Article Optics

Surface passivation of perovskite film for efficient solar cells

Qi Jiang et al.

NATURE PHOTONICS (2019)

Article Chemistry, Multidisciplinary

Defect-Engineering-Enabled High-Efficiency All-Inorganic Perovskite Solar Cells

Jia Liang et al.

ADVANCED MATERIALS (2019)

Article Chemistry, Physical

Excess Cesium Iodide Induces Spinodal Decomposition of CsPbI2Br Perovskite Films

Xiangyue Meng et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2019)

Review Chemistry, Multidisciplinary

A Review of Perovskites Solar Cell Stability

Rui Wang et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Review Chemistry, Multidisciplinary

Imperfections and their passivation in halide perovskite solar cells

Bo Chen et al.

CHEMICAL SOCIETY REVIEWS (2019)

Article Chemistry, Physical

Achievable high Voc of carbon based all-inorganic CsPbIBr2 perovskite solar cells through interface engineering

Zhanglin Guo et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Review Chemistry, Physical

Untapped Potentials of Inorganic Metal Halide Perovskite Solar Cells

Anita Ho-Baillie et al.

JOULE (2019)

Review Chemistry, Multidisciplinary

Recent progress of inorganic perovskite solar cells

Qidong Tai et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

Article Chemistry, Physical

Bi-functional additive engineering for high-performance perovskite solar cells with reduced trap density

Yi Yang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Article Chemistry, Physical

Formation of binocular-like structure using graphene nanosheet and carbon nanotubes

Danhui Zhang et al.

MOLECULAR SIMULATION (2018)

Article Chemistry, Multidisciplinary

High-Purity Inorganic Perovskite Films for Solar Cells with 9.72% Efficiency

Jialong Duan et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

Article Nanoscience & Nanotechnology

Synthesis of Water-Soluble Antimony Sulfide Quantum Dots and Their Photoelectric Properties

Jiang Zhu et al.

NANOSCALE RESEARCH LETTERS (2018)

Article Nanoscience & Nanotechnology

Synthesis of Water-Soluble Antimony Sulfide Quantum Dots and Their Photoelectric Properties

Jiang Zhu et al.

NANOSCALE RESEARCH LETTERS (2018)

Article Nanoscience & Nanotechnology

Metasurface-Based Ultrathin Beam Splitter with Variable Split Angle and Power Distribution

Xingliang Zhang et al.

ACS PHOTONICS (2018)

Article Chemistry, Multidisciplinary

CsPb0.9Sn0.1IBr2 Based All-Inorganic Perovskite Solar Cells with Exceptional Efficiency and Stability

Jia Liang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)

Article Chemistry, Multidisciplinary

All-Inorganic Perovskite Solar Cells

Jia Liang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)

Article Chemistry, Multidisciplinary

Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells

Akihiro Kojima et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)

Article Thermodynamics

Thermodynamic and thermal investigation of Co(II), Ni(II) and Cu(II) complexes with adenine

MG Abd El Wahed et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2004)