Related references
Note: Only part of the references are listed.
Article
Thermodynamics
Kunal Sandip Garud et al.
Summary: The grey relational based Taguchi analysis was used to evaluate the effect of influential factors on the heat transfer performances of a direct oil spray cooling system for electric vehicle driving motor. The study considered different nozzle types, coolant temperature, heating capacity, flow rate, and distance between nozzle spray and heating source. The analysis provided insights into the influential factors and their contributions to the system's heat transfer performances.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
(2023)
Article
Thermodynamics
Yang Li et al.
Summary: This study proposes and tests a liquid immersion cooling scheme based on SF33 for cooling different types of cylindrical lithium-ion batteries (LIBs) during fast charging. The results show that SF33 immersion cooling has a significant advantage in controlling battery temperature, ensuring stability and safety during fast charging. The heat transfer mechanism and bubble behavior during SF33 cooling process are analyzed.
THERMAL SCIENCE AND ENGINEERING PROGRESS
(2023)
Review
Thermodynamics
Gang Zhao et al.
Summary: This paper reviews the effectiveness and efficiency of the liquid-cooling battery thermal management system (BTMS) for electric vehicles. It highlights the recent research on design improvements and optimization for the liquid-cooling BTMSs, emphasizing the most effective approaches to better cooling performance. The paper also discusses the current gaps and future directions in the research of liquid-cooling BTMS designs for the EV industry.
APPLIED THERMAL ENGINEERING
(2023)
Article
Thermodynamics
Shangquan Wu et al.
Summary: This study has successfully developed an oil-immersed battery system with high integration ratio and excellent safety, providing a feasible solution for the demand of high safety and high specific energy of electric vehicle battery systems.
APPLIED THERMAL ENGINEERING
(2022)
Review
Thermodynamics
Xinghui Zhang et al.
Summary: Electric vehicles powered by lithium-ion batteries have great potential in alleviating energy and environmental issues, but temperature management is crucial for their development and propagation. Both high and low temperature environments can negatively impact battery performance and safety, requiring proper handling.
Review
Chemistry, Physical
Fazil Qureshi et al.
Summary: Hydrogen-based energy solutions, particularly derived from glycerol reforming, offer clean and efficient alternatives for energy production. This review explores the advancements in glycerol reforming techniques for H2 production, highlighting GSR as the most promising method with limited drawbacks. However, challenges including high-temperature reaction and catalyst coking hinder commercialization.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
(2022)
Review
Chemistry, Physical
Charlotte Roe et al.
Summary: Battery thermal management systems are critical for high-performance electric vehicles. Immersion cooling can significantly increase heat transfer rate, but system complexity and fluid stability should be considered.
JOURNAL OF POWER SOURCES
(2022)
Article
Thermodynamics
Mohamed Omri et al.
Summary: This study presents a numerical analysis of nanofluid enhanced heat transfer in a micro heat exchanger with triangular fins. The results show that the performance of the heat exchanger is significantly improved using CNT nanofluid and triangular fins.
CASE STUDIES IN THERMAL ENGINEERING
(2022)
Article
Thermodynamics
Yang Li et al.
Summary: This study examines and discusses the use of fluorinated liquid immersion cooling as a new cooling scheme for the 18650 lithium-ion battery. The results demonstrate that immersion cooling is more effective than forced air cooling in cooling the battery under various conditions, with temperature control within a lower range.
CASE STUDIES IN THERMAL ENGINEERING
(2022)
Article
Chemistry, Physical
R. Cagtay Sahin et al.
Summary: Lithium-ion battery packs are preferred in electrical vehicles (EVs) for their efficient and stable characteristics. This study offers a novel design method for cylindrical cells by evaluating the effect of various baffles on the cooling performance and pressure drop of an air-cooled battery module.
JOURNAL OF POWER SOURCES
(2022)
Article
Thermodynamics
Qin Le et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
(2022)
Article
Energy & Fuels
Qingkai Gu et al.
Summary: In this study, composite phase change materials (CPCM) were prepared using paraffin (PA) and expanded graphite (EG). The optimal thickness of CPCM was determined through experimental study. A new structure of BTMS was proposed to reduce overall weight, based on which the cooling performance requirements of Li-ion batteries were met without additional energy. Simulation results showed that the new structure had better cooling performance and decreased flow dead zone. The weight of the module was reduced using fins. The research results provide research ideas for the application of CPCM to electric vehicles.
JOURNAL OF ENERGY STORAGE
(2022)
Article
Multidisciplinary Sciences
Huiqiao Liu et al.
Summary: This study introduces an improved LightGBM-based framework for battery RUL prediction, which achieves enhanced accuracy and speed by adaptively adjusting to multiple HIs and improving the loss function, validated with database testing for optimal performance.
Article
Thermodynamics
Kunal Sandip Garud et al.
Summary: In this study, thermodynamic, environmental, and economic analyses were conducted on photovoltaic/thermal (PV/T) and photovoltaic/thermal-thermoelectric generator (PV/T-TEG) systems. The results showed that the PV/T-TEG system outperformed the PV/T system, and Al2O3/Cu nanofluid and oblate spheroid-shaped nanoparticles exhibited superior performances in both systems.
Article
Thermodynamics
Kunal Sandip Garud et al.
Summary: This study experimentally investigated the performance characteristics of a direct spray oil cooling system, and explored the effects of nozzle type, cooling oil type, and flow rate on the performance characteristics. The results showed that the combination of dielectric oil and full cone-1 nozzle exhibited superior performance characteristics.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
(2022)
Article
Multidisciplinary Sciences
Jeong-Woo Han et al.
Summary: The rapidly growing commercialization of electric vehicles has led to a demand for higher capacity lithium-ion batteries with higher heat generation. This study focuses on the thermal management of batteries using direct liquid cooling, as the currently widely used indirect liquid cooling methods have disadvantages. The experimental investigation examines the discharge and heat transfer characteristics of lithium-ion batteries with direct liquid cooling under various conditions. The results show the impact of discharge rates, inlet temperatures, and volume flow rates of coolant on discharge voltage and capacity, maximum temperature, temperature difference, average temperature, heat absorbed, and heat transfer coefficient.
Article
Thermodynamics
Yuqi Huang et al.
Summary: This paper investigates the impact of structural optimization of the cooling plate on the temperature distribution uniformity of the battery pack in the liquid-cooled system of electrical vehicle. Numerical analysis and experimental validation are conducted to propose and analyze three structural design schemes. The results demonstrate that the temperature distribution uniformity of the battery pack can be effectively improved after the structural optimization of the cooling plate. This optimization method can serve as a reference for the structural design of the cooling plate.
APPLIED THERMAL ENGINEERING
(2022)
Article
Thermodynamics
Mohsen Akbarzadeh et al.
Summary: This study compared the effect of air type and liquid type thermal management systems on a high-energy lithium-ion battery module, investigating the parasitic power consumption and cooling performance of a 48V module. The results showed that the liquid type thermal management system can achieve lower module temperatures and better temperature uniformity under a certain power consumption. This research represents a step towards the development of energy-efficient battery thermal management systems.
APPLIED THERMAL ENGINEERING
(2021)
Article
Thermodynamics
Ziqiang Liu et al.
Summary: By utilizing a heat dissipation module based on a composite phase change material (CPCM) and liquid cooling, the thermal management of battery packs can be improved, making it more suitable for cyclic charging and discharging. Rapid realization of different heat dissipation solutions for battery pack modules with the coupling of CPCM and liquid cooling can be achieved by simply adjusting the hose connection. Furthermore, increasing the flow rate and decreasing the temperature of input cold water can enhance the heat dissipation effect of the battery pack.
APPLIED THERMAL ENGINEERING
(2021)
Article
Energy & Fuels
Prahit Dubey et al.
Summary: The study evaluates the thermal performance of immersion cooling for an EV battery module and compares it with cold-plate cooling. Immersion cooling leads to lower cell temperature and temperature gradients at high discharge rates, but higher temperature non-uniformity. At low discharge rates, both cooling methods show similar performance.
Article
Thermodynamics
Mahesh Suresh Patil et al.
Summary: This study investigated the direct cooling performance of Li-ion batteries and battery packs for electric vehicles using dielectric fluid immersion cooling technology. Experimental results showed improved cooling performance with a 46.8% reduction in temperature using flowing dielectric fluid assisted with tab cooling. The development of an electrochemical-thermal model and its validation through numerical study and experimental data demonstrated the effectiveness of this cooling technology.
ENERGY CONVERSION AND MANAGEMENT
(2021)
Review
Thermodynamics
Jiayuan Lin et al.
Summary: This article summarizes thermal management models from literature and categorizes multi-physical battery thermal management systems. Emergency battery thermal management methods are also discussed. A novel digital solution based on the CHAIN framework is proposed to improve temperature control strategy for EV power systems.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
(2021)
Article
Thermodynamics
Weichao Zhuang et al.
Summary: A new battery thermal management system is developed in this study by optimizing the battery pack structure and cooling strategy, achieving significant energy savings and temperature stability through improved cooling performance, enhanced temperature uniformity, and intelligent control of cooling intensity.
APPLIED THERMAL ENGINEERING
(2021)
Article
Thermodynamics
Fei Dong et al.
Summary: In this study, a novel double helix cooling structure was designed for an 18650 lithium battery, and numerical simulation was used to investigate the effects of coolant mass flow rate, helix groove pitch, and flow diameter on cooling performance. By using Kriging approximate model method and Non-dominated Sorting Genetic Algorithm II, the optimal solutions were obtained. The results showed that increasing mass flow rate can effectively lower the maximum temperature of the battery within a certain range, while the pitch and diameter also have an impact on the cooling performance.
APPLIED THERMAL ENGINEERING
(2021)
Article
Multidisciplinary Sciences
Kunal Sandip Garud et al.
Summary: The study evaluates the heat transfer characteristics of water, Al2O3, and Al2O3/Cu nanofluids, analyzing the effects of Reynolds number, volume fraction, and nanoparticle composition on heat transfer properties. Hybrid nanofluids show superior thermophysical properties compared to single particle nanofluids and water, with increasing heat transfer coefficient, Nusselt number, and pressure drop with higher Reynolds number and volume fraction. Overall, 2.0% Al2O3/Cu with equal composition of nanoparticles presented the best heat transfer characteristics among all fluids.
Article
Thermodynamics
Xiaojun Tan et al.
Summary: This paper proposes a novel direct liquid battery cooling system for fast-charging battery packs based on a hydrofluoroether coolant. Through high-fidelity CFD simulations, it is found that optimizing channel design and coolant velocity can improve energy density and reduce power consumption, while a multilayer structure and cross-flowing configuration can reduce temperature difference and standard deviation.
APPLIED THERMAL ENGINEERING
(2021)
Article
Thermodynamics
E. Jiaqiang et al.
Summary: A heat pipe heat dissipation model for a lithium-ion battery pack in central and southern China was established, investigating the effects of different fin spacing and thickness on heat transfer. Optimal fin structure parameters were determined based on heat dissipation changes, and battery temperature distribution under different discharge rates was analyzed. The battery pack using the HP showed effective temperature control under various discharge rates.
Article
Engineering, Chemical
Amjad Ali et al.
Summary: Saudi Arabia has set a target to deploy 58.7 gigawatts of renewable energy by 2030, and the renewable portfolio standard (RPS) may play a significant role in achieving this goal.
Article
Energy & Fuels
Mahesh Suresh Patil et al.
Summary: Structural and flow parameters significantly impact the thermal and hydraulic performance of a lithium-ion battery and cooling system. An orthogonal test and multi-objective optimization with genetic algorithm are used to determine the key factors influencing thermal behavior and optimize cooling system for optimal battery performance, achieving minimized objective functions for key parameters.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH
(2021)
Article
Multidisciplinary Sciences
Moo-Yeon Lee et al.
Article
Thermodynamics
Mahesh Suresh Patil et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
(2020)
Article
Chemistry, Physical
Haikuo Zhou et al.
JOURNAL OF POWER SOURCES
(2020)
Article
Energy & Fuels
Liu Cheng et al.
JOURNAL OF ENERGY STORAGE
(2020)
Article
Engineering, Electrical & Electronic
David W. Sundin et al.
IEEE OPEN JOURNAL OF VEHICULAR TECHNOLOGY
(2020)
Article
Energy & Fuels
Mahesh Suresh Patil et al.
Review
Thermodynamics
Huaqiang Liu et al.
ENERGY CONVERSION AND MANAGEMENT
(2017)
Article
Thermodynamics
Mushtaq Ismael Hasan
APPLIED THERMAL ENGINEERING
(2014)
Review
Chemistry, Physical
Languang Lu et al.
JOURNAL OF POWER SOURCES
(2013)
