☆ 4.6 Review

Circular Design Principles Applied on Dye-Sensitized Solar Cells

SUSTAINABILITY (2022)

Related references

Note: Only part of the references are listed.

Review Environmental Sciences

Review on fabrication methodologies and its impacts on performance of dye-sensitized solar cells

Geetam Richhariya et al.

Summary: This review highlights the impact of different fabrication processes on the efficiency of dye-sensitized solar cells (DSSCs), with a specific focus on the application of natural dyes. The use of optimized photoanodes and doping with Ta element has shown significant improvements in power conversion efficiency. The absorbance of betalain and anthocyanin pigments in visible range has also been explored. Overall, the use of natural dyes in DSSCs offers economic, readily available, and environmentally friendly alternatives.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2022)

Add to Collection

Article Energy & Fuels

Carbon Nanotubes in Emerging Photovoltaics: Progress and Limitations

Sakshi Sharma et al.

Summary: This article provides an overview of the use of carbon nanotubes (CNTs) in various types of solar cells, highlighting their importance in improving efficiency and stability, and discussing their future prospects in the commercial solar cell market.

IEEE JOURNAL OF PHOTOVOLTAICS (2022)

Add to Collection

Article Green & Sustainable Science & Technology

The aluminium demand risk of terawatt photovoltaics for net zero emissions by 2050

Alison Lennon et al.

Summary: Greater deployment of photovoltaics is crucial for reducing global greenhouse gas emissions, but the demand for aluminium poses a significant threat to global warming. To mitigate emissions, it is important to reduce the carbon emissions from aluminium production and decrease the use of primary aluminium. According to recent photovoltaics roadmaps, to rapidly reduce emissions to 'net zero' and limit global warming to below 2 degrees C by 2050, over 60 TW of photovoltaics must be installed and an additional capacity of up to 4.5 TW per year must be produced. However, as of the end of 2020, only slightly over 700 GW peak of photovoltaic power was installed, making the manufacturing task ahead enormous and demanding various minerals. It is predicted that the growth to 60 TW of photovoltaics could require up to 486 Mt of aluminium by 2050. The significant aluminium demand raises concerns about its global warming potential, highlighting the need to maximize the use of secondary aluminum and rapidly decarbonize the electricity grid within 10 years to keep cumulative emissions below 1,000 Mt of CO2 equivalent by 2050.

NATURE SUSTAINABILITY (2022)

Add to Collection

Article Multidisciplinary Sciences

PV in the circular economy, a dynamic framework analyzing technology evolution and reliability impacts

Silvana Ovaitt et al.

Summary: Researchers propose the PV ICE framework to track material flows of PV modules and provide dynamic baselines for analyzing module material lifecycles. The results show that manufacturing efficiencies significantly impact material demand, while reliability and circular pathways present the best opportunities to reduce waste.

ISCIENCE (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Investigating the Remanufacturing Potential of Dye-Sensitized Solar Cells

Fabian Schoden et al.

Summary: This article discusses the urgent situation of resource crisis and the importance of renewable energy technologies. It mentions dye-sensitized solar cells as an emerging technology that can serve as an environmentally friendly and renewable energy solution. The research found that by remanufacturing old DSSCs, their lifespan can be extended and they can be rebuilt multiple times.

SUSTAINABILITY (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Transition Metal Coordination Compounds as Novel Materials for Dye-Sensitized Solar Cells

Klaudia Pawlus et al.

Summary: This paper presents examples of compounds containing transition metals in dye-sensitized solar cells and provides their basic photovoltaic parameters.

APPLIED SCIENCES-BASEL (2022)

Add to Collection

Review Energy & Fuels

Importance and Advancement of Modification Engineering in Perovskite Solar Cells

Xiang Wu et al.

Summary: This review summarizes various ionic materials utilized in perovskite solar cells (PSCs) in recent years and discusses their mechanisms to improve device performance, including defect passivation, energy-level alignment improvement, and crystal structure modulation. Future research trends are also proposed.

SOLAR RRL (2022)

Add to Collection

Review Green & Sustainable Science & Technology

Sustainable PV Module Design-Review of State-of-the-Art Encapsulation Methods

Anna Katharina Schnatmann et al.

Summary: In the era of climate change and resource scarcity, the importance of sustainable renewable energy technologies is increasing. However, the photovoltaic industry faces issues such as linear economy structures, energy-intensive production, and limited sustainability. This paper provides an overview of the current state of encapsulation methods in the PV industry, including production, materials, and recycling. It also discusses alternative encapsulation technologies and emphasizes the need for research to focus on sustainability and recyclability.

SUSTAINABILITY (2022)

Add to Collection

Review Green & Sustainable Science & Technology

Global Challenges and Prospects of Photovoltaic Materials Disposal and Recycling: A Comprehensive Review

Hui Fang Yu et al.

Summary: This paper provides an overview of end-of-life management of photovoltaic (PV) modules, focusing on the challenges faced in PV recycling. It discusses the regulatory frameworks implemented in different countries regarding PV waste and proposes recommendations to improve the EoL management of PV modules. The establishment of a sustainable PV waste management framework requires legislations promoting the extended producer responsibility principle, presence of suitable infrastructure, research and development, and cooperation of various governmental and private bodies.

SUSTAINABILITY (2022)

Add to Collection

Review Materials Science, Multidisciplinary

Perovskite Solar Cells: A Review of the Recent Advances

Priyanka Roy et al.

Summary: Perovskite solar cells have great potential in improving photovoltaic performance with low fabrication costs and high tunability. However, stability and manufacturing scalability remain challenges.

COATINGS (2022)

Add to Collection

Review Energy & Fuels

Recent advances in polymer structures for organic solar cells: A review

Taihana Paula et al.

Summary: This article discusses the importance of photovoltaic technology as an alternative energy source, with a particular focus on the development of organic solar cells. Organic solar cells have higher power conversion efficiency and durability, and are easier to manufacture and process.

AIMS ENERGY (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Eco-design for dye solar cells: From hazardous waste to profitable recovery

Kati Miettunen et al.

Summary: Recycling is rarely considered in the field of dye solar cells, but it should be a critical part of eco-design to ensure sustainability. The economic incentive plays a major role in determining whether recycling will occur, and using alternative materials can support economically motivated recycling efforts.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Recent advances in perovskite/organic integrated solar cells

Qiang Guo et al.

Summary: This review discusses the recent developments, working mechanism, and charge dynamic in integrated perovskite/organic solar cells (IPOSC), as well as the potential to improve device performance.

RARE METALS (2021)

Add to Collection

Article Chemistry, Physical

Investigating the Recycling Potential of Glass Based Dye-Sensitized Solar Cells-Melting Experiment

Fabian Schoden et al.

Summary: The effects of climate change are increasingly clear, and the urgency of solving the energy and resource crisis has been recognized by politicians and society. Sustainable energy technologies, such as dye-sensitized solar cells (DSSCs), are important solutions with high potential due to their low production costs and non-toxic components.

MATERIALS (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Life cycle assessment of semi-transparent photovoltaic window applied on building

Zihao Li et al.

Summary: The research on the Semi-Transparent Photovoltaic (STPV) Window revealed that its EPBT is 13.8 years and GPBT is 10.4 years, both less than the preset service life of 25 years. Optimization analysis can make the STPV window more economical and sustainable.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Review Engineering, Electrical & Electronic

Dye-Sensitized Solar Cell for Indoor Applications: A Mini-Review

Dheeraj Devadiga et al.

Summary: In recent years, lightweight computing technologies such as the Internet of Things and flexible wearable systems have exponentially penetrated everyday life. The running of electronic devices poses a major energy problem, which can potentially be solved by using self-sustainable power sources like photovoltaic cells such as dye-sensitized solar cells to meet the energy demands of indoor electronics.

JOURNAL OF ELECTRONIC MATERIALS (2021)

Add to Collection

Article Polymer Science

Cobalt selenide decorated polyaniline composite nanofibers as a newer counter electrode for dye-sensitized solar cell

Elindjeane Sheela Sowbakkiyavathi et al.

Summary: The research involved preparing cobalt selenide nanoparticles and polyaniline nanofibers, then combining them as a new photocathode for dye-sensitized solar cells. The composite material exhibited excellent electrochemical properties, attributed to the synergistic effects of cobalt selenide and polyaniline.

POLYMERS FOR ADVANCED TECHNOLOGIES (2021)

Add to Collection

Review Energy & Fuels

Review of State of the Art Recycling Methods in the Context of Dye Sensitized Solar Cells

Fabian Schoden et al.

Summary: In the face of climate change and diminishing fossil resources, the demand for sustainable renewable energy technologies is increasing. Dye sensitized solar cells (DSSC) have the potential to supplement existing green energy technologies in the future, despite their lack of efficiency and stability. The low production costs and lack of toxic compounds make DSSCs a potential product to circulate in the loops of a circular economy.

ENERGIES (2021)

Add to Collection

Article Energy & Fuels

Updated sustainability status of crystalline silicon-based photovoltaic systems: Life-cycle energy and environmental impact reduction trends

Vasilis Fthenakis et al.

Summary: This paper provides a comprehensive assessment of the current life-cycle sustainability status of crystalline-based photovoltaic systems, showing significant environmental improvement and reduced energy demand in the production process.

PROGRESS IN PHOTOVOLTAICS (2021)

Add to Collection

Review Green & Sustainable Science & Technology

A Systematic Literature Review of the Solar Photovoltaic Value Chain for a Circular Economy

Maria A. Franco et al.

Summary: This study aims to identify areas along the PV value chain where circular strategies could be implemented to advance the transition of the PV industry towards circularity. Results show that current research primarily focuses on technological aspects, with limited attention to circular design, circular business models, and PV reuse.

SUSTAINABILITY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Investigation of the Long-Term Stability of Different Polymers and Their Blends with PEO to Produce Gel Polymer Electrolytes for Non-Toxic Dye-Sensitized Solar Cells

Marius Dotter et al.

Summary: The study investigated the potential of gel polymer electrolyte (GPE) systems based on DMSO for low-cost, non-toxic, and environmentally friendly DSSCs. It was found that blending polymers with PEO can lead to improved long-term stability and overall efficiency, with mixtures containing PAN and PVDF showing minimal signs of deterioration after 120 days of measurement.

APPLIED SCIENCES-BASEL (2021)

Add to Collection

Review Energy & Fuels

Towards a circular supply chain for PV modules: Review of today's challenges in PV recycling, refurbishment and re-certification

John A. Tsanakas et al.

PROGRESS IN PHOTOVOLTAICS (2020)

Add to Collection

Article Optics

Glycerin-based electrolyte for reduced drying of dye-sensitized solar cells

Katrin Gossen et al.

OPTIK (2020)

Add to Collection

Article Optics

Optimization of the TiO2 layer in DSSCs by a nonionic surfactant

Suphawit Udomrungkhajornchai et al.

OPTIK (2020)

Add to Collection

Article Energy & Fuels

The use of recycled semiconductor material in crystalline silicon photovoltaic modules production - A life cycle assessment of environmental impacts

Ewa Klugmann-Radziemska et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Building a Wind Power Plant from Scrap and Raising Public Awareness for Renewable Energy Technology in a Circular Economy

Fabian Schoden et al.

SUSTAINABILITY (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Prospective life cycle assessment of third-generation photovoltaics at the pre-industrial scale: A long-term scenario approach

M. L. Parisi et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Combined LCA and Green Metrics Approach for the Sustainability Assessment of an Organic Dye Synthesis on Lab Scale

Maria Laura Parisi et al.

FRONTIERS IN CHEMISTRY (2020)

Add to Collection

Article Energy & Fuels

Major challenges and opportunities in silicon solar module recycling

Meng Tao et al.

PROGRESS IN PHOTOVOLTAICS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Mixed bulky cations for efficient and stable Ruddlesden-Popper perovskite solar cells

Jishan Shi et al.

APL MATERIALS (2020)

Add to Collection

Article Polymer Science

Long-Term Stability Improvement of Non-Toxic Dye-Sensitized Solar Cells via Poly(ethylene oxide) Gel Electrolytes for Future Textile-Based Solar Cells

Jan Lukas Storck et al.

POLYMERS (2020)

Add to Collection

Article Energy & Fuels

Pathway toward market entry of perovskite solar cells: A detailed study on the research trends and collaboration networks through bibliometrics

Jun-Seok Yeo et al.

ENERGY REPORTS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Recent advances in eco-friendly and cost-effective materials towards sustainable dye-sensitized solar cells

Nicole Mariotti et al.

GREEN CHEMISTRY (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Dye-Sensitized Solar Cells (DSSCs) Based on Extracted Natural Dyes

Ahmed M. Ammar et al.

JOURNAL OF NANOMATERIALS (2019)

Add to Collection

Article Engineering, Environmental

Resource efficient recovery of critical and precious metals from waste silicon PV panel recycling

Fulvio Ardente et al.

WASTE MANAGEMENT (2019)

Add to Collection

Article Energy & Fuels

Environmental performance of window-integrated systems using dye sensitised solar module technology in Malaysia

Nur Ifthitah Mustafa et al.

SOLAR ENERGY (2019)

Add to Collection

Article Energy & Fuels

Building an Organic Solar Cell: Fundamental Procedures for Device Fabrication

Katerina Anagnostou et al.

ENERGIES (2019)

Add to Collection

Article Green & Sustainable Science & Technology

Raising reproducibility in dye-sensitized solar cells under laboratory conditions

Florian Hoelscher et al.

JOURNAL OF RENEWABLE AND SUSTAINABLE ENERGY (2018)

Add to Collection

Article Optics

Influence of dyes and dying process parameters on the electrical properties of dye-sensitized solar cells

Bastian Bohnenkamp et al.

OPTIK (2018)

Add to Collection

Article Optics

Refilling DSSCs as a method to ensure longevity

Iren Juhasz Junger et al.

OPTIK (2018)

Add to Collection

Article Energy & Fuels

Outdoor testing and ageing of dye-sensitized solar cells for building integrated photovoltaics

Huihui Yuan et al.

SOLAR ENERGY (2018)

Add to Collection

Review Green & Sustainable Science & Technology

Prospects of life cycle assessment of renewable energy from solar photovoltaic technologies: A review

Norasikin Ahmad Ludin et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)

Add to Collection

Article Green & Sustainable Science & Technology

Sustainability of artisanal mining of cobalt in DR Congo

Celestin Banza Lubaba Nkulu et al.

NATURE SUSTAINABILITY (2018)

Add to Collection

Article Chemistry, Multidisciplinary

A technoeconomic analysis of perovskite solar module manufacturing with low-cost materials and techniques

Zhaoning Song et al.

ENERGY & ENVIRONMENTAL SCIENCE (2017)

Add to Collection

Review Engineering, Environmental

Conceptualizing the circular economy: An analysis of 114 definitions

Julian Kirchherr et al.

RESOURCES CONSERVATION AND RECYCLING (2017)

Add to Collection

Article Engineering, Environmental

Environmental impact of PV cell waste scenario

M. Bogacka et al.

WASTE MANAGEMENT (2017)

Add to Collection

Article Energy & Fuels

Rehydrating dye sensitized solar cells

Christian Hellert et al.

AIMS ENERGY (2017)

Add to Collection

Review Green & Sustainable Science & Technology

Manufacturing metrology for c-Si module reliability and durability Part III: Module manufacturing

Eric J. Schneller et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)

Add to Collection

Article Energy & Fuels

Life Cycle Assessment (LCA) of perovskite PV cells projected from lab to fab

Ilke Celik et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2016)

Add to Collection

Review Green & Sustainable Science & Technology

The evolution of the dye sensitized solar cells from Gratzel prototype to up-scaled solar applications: A life cycle assessment approach

Maria Laura Parisi et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2014)

Add to Collection

Article Green & Sustainable Science & Technology

Ecodesign maturity model: a management framework to support ecodesign implementation into manufacturing companies

Daniela C. A. Pigosso et al.

JOURNAL OF CLEANER PRODUCTION (2013)

Add to Collection

Article Energy & Fuels

Critical metals in strategic photovoltaic technologies: abundance versus recyclability

Annick Anctil et al.

PROGRESS IN PHOTOVOLTAICS (2013)

Add to Collection

Article Chemistry, Physical

Role of Carbon Nanotubes in Dye-Sensitized TiO2-Based Solar Cells

Jiazang Chen et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2012)

Add to Collection

Review Materials Science, Coatings & Films

Commercialization of dye sensitized solar cells: Present status and future research needs to improve efficiency, stability, and manufacturing

Jason B. Baxter

JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A (2012)

Add to Collection

Article Electrochemistry

Highly efficient quasi-solid-state quantum-dot-sensitized solar cell based on hydrogel electrolytes

Zhexun Yu et al.

ELECTROCHEMISTRY COMMUNICATIONS (2010)

Add to Collection

Article Chemistry, Physical

Oligomer approaches for solid-state dye-sensitized solar cells employing polymer electrolytes

Moon-Sung Kang et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2007)

Add to Collection

© Peeref 2019-2024. All rights reserved.