4.6 Article

Analysis of a Combined Solar Drying System for Wood-Chips, Sawdust, and Pellets

Related references

Note: Only part of the references are listed.
Article Energy & Fuels

Energy analysis of a combined solar wood drying system

Ahmed Khouya

Summary: This study proposed a hybrid solar dryer model combining a heat pump and concentrated photovoltaic thermal system, using air as a cooling fluid for the solar cells. Results showed that the proposed system reduced drying time significantly, improved system performance and efficiency.

SOLAR ENERGY (2022)

Article Energy & Fuels

Modeling of sawdust drying in spouted beds using solar energy and phase change materials

A. Reyes et al.

Summary: This study focuses on the modeling and simulation of continuous drying of sawdust using spouted beds connected in series and a solar energy accumulator panel. The modeling approach is based on energy balances for the solar energy accumulator panel and a combination of residence time distribution, drying kinetics, and micro-mixing models for the dryer. Model parameters were adjusted and validated using experimental data. The results showed that the increase in spouted bed units has a greater impact on moisture content leaving the dryer.

JOURNAL OF ENERGY STORAGE (2022)

Article Computer Science, Information Systems

Wood Products Manufacturing Optimization: A Survey

Seyed Mohsen Hosseini et al.

Summary: This review explores the opportunities, challenges, and methodologies of optimizing decision-making processes in wood manufacturing. It provides references and guidelines for researchers and manufacturers interested in the topic, as well as recommendations for future research directions.

IEEE ACCESS (2022)

Article Engineering, Multidisciplinary

Design, realization and comparison of three passive solar dryers. Orange drying application for the Rabat site (Morocco)

H. Krabch et al.

Summary: This research conducted experiments on drying orange slices using three indirect solar dryers. The results showed that the third solar dryer had the best thermal performance and drying duration, and its design was more cost-effective. This research is beneficial for promoting the use of solar dryers among local producers.

RESULTS IN ENGINEERING (2022)

Article Engineering, Chemical

Thermal performance and economic analysis of an indirect solar dryer of wood integrated with packed-bed thermal energy storage system: A case study of solar thermal applications

Bilal Lamrani et al.

Summary: This study investigated the thermal performance and economic feasibility of an indirect solar wood dryer integrated with a thermal energy storage system. A new numerical model was developed and simulations showed that integrating the storage system can significantly reduce drying time and payback period. Results indicated that the system is most suitable for Zone 6 with a payback period of 1.85 years.

DRYING TECHNOLOGY (2021)

Article Thermodynamics

Modelling and analysis of a hybrid solar dryer for woody biomass

Ahmed Khouya

Summary: This study evaluated the energy and performance of a hybrid solar dryer for woody biomass, developing a mathematical model to predict heat and mass transfer during the drying process. Results showed that the combined use of a solar air collector and a heat pump can effectively reduce energy consumption and improve thermal performance during biomass drying.

ENERGY (2021)

Article Green & Sustainable Science & Technology

Design and performance evaluation of an evacuated tube solar dryer for drying garlic clove

Santanu Malakar et al.

Summary: The study designed and developed an evacuated tube collector-based solar dryer with heat pipe for drying garlic cloves. Experimental results showed that the dryer performed best at an air flow velocity of 2 m/s, capable of efficiently drying garlic cloves within 8 hours with a short payback period of 1.3 years.

RENEWABLE ENERGY (2021)

Article Multidisciplinary Sciences

Estimation of moisture ratio for apple drying by convective and microwave methods using artificial neural network modeling

Vali Rasooli Sharabiani et al.

Summary: The study compared the effects and performance of convective drying and microwave drying methods for dehydration of apples. The results showed that microwave drying technology was more efficient than convective drying, performing better overall and showing significant differences in aspects such as moisture diffusion rate, activation energy, and specific energy consumption. Artificial neural network models effectively predicted the moisture ratio of apple slices under different drying methods.

SCIENTIFIC REPORTS (2021)

Article Green & Sustainable Science & Technology

Trendline Assessment of Solar Energy Potential in Hungary and Current Scenario of Renewable Energy in the Visegrad Countries for Future Sustainability

Baibhaw Kumar et al.

Summary: This article explores opportunities for improved solar energy utilization in Visegrad Countries by increasing the share of renewables in energy generation. The focus is on Hungary, investigating various facets of solar energy demand and supply using geographical maps, technical analysis, and temperature distribution profiles. The analysis reveals Hungary's significant solar potential and efforts towards sustainable solar energy utilization.

SUSTAINABILITY (2021)

Article Green & Sustainable Science & Technology

Sawdust drying process in a large-scale pellets facility: An energy and exergy analysis

Joao Silva et al.

Summary: Biomass is a vital renewable resource that can be directly used or transformed into biofuels, with its thermochemical properties affecting system efficiency. Energy and exergy analysis of a sawdust drying process reveals the importance of optimizing operating conditions for improved facility efficiency.

CLEANER ENVIRONMENTAL SYSTEMS (2021)

Review Engineering, Chemical

Drying efficiency and product quality of biomass drying: a review

Junpeng Yi et al.

DRYING TECHNOLOGY (2020)

Article Energy & Fuels

Feasibility of Solar-Enhanced Drying of Woody Biomass

Jyrki Raitila et al.

BIOENERGY RESEARCH (2020)

Article Green & Sustainable Science & Technology

Energy and exergy analysis of an indirect solar dryer based on a dynamic model

S. Hatami et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Article Engineering, Chemical

Design and performance evaluation of a passive flat plate collector solar dryer for agricultural products

Onkar A. Babar et al.

JOURNAL OF FOOD PROCESS ENGINEERING (2020)

Article Agricultural Engineering

Future potentials of sustainable wood fuel from forests in Switzerland

Oliver Thees et al.

BIOMASS & BIOENERGY (2020)

Article Green & Sustainable Science & Technology

A New Methodology for the Development of Appropriate Technology: A Case Study for the Development of a Wood Solar Dryer

Luis Bernardo Lopez-Sosa et al.

SUSTAINABILITY (2019)

Article Engineering, Chemical

Potential of integrating Na2SO4 center dot 10H(2)O pellets in solar drying system

Macmanus C. Ndukwu et al.

DRYING TECHNOLOGY (2018)

Review Engineering, Chemical

Drying of biofuels from the forest-A review

Stig Stenstrom

DRYING TECHNOLOGY (2017)

Article Green & Sustainable Science & Technology

Solar greenhouse dryer system for wood chips improvement as biofuel

Alberto-Jesus Perea-Moreno et al.

JOURNAL OF CLEANER PRODUCTION (2016)

Review Green & Sustainable Science & Technology

From wood pellets to wood chips, risks of degradation and emissions from the storage of woody biomass - A short review

Esa Alakoski et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)

Article Energy & Fuels

Mechanical properties of sawdust and woodchips

Mateusz Stasiak et al.

Article Green & Sustainable Science & Technology

Energy and exergy analysis of different solar air collector systems with forced convection

D. Bahrehmand et al.

RENEWABLE ENERGY (2015)

Article Thermodynamics

Multi-shelf domestic solar dryer

PP Singh et al.

ENERGY CONVERSION AND MANAGEMENT (2006)

Article Green & Sustainable Science & Technology

Efficiency and exergy analysis of a new solar air heater

I Kurtbas et al.

RENEWABLE ENERGY (2004)

Article Thermodynamics

Mathematical modelling and experimental verification of wood drying process

HSF Awadalla et al.

ENERGY CONVERSION AND MANAGEMENT (2004)