☆ 4.6 Article

Application of Extended Set Pair Analysis on Wear Risk Evaluation of Backfill Pipeline

SUSTAINABILITY (2022)

Related references

Note: Only part of the references are listed.

Article Engineering, Chemical

Effect of cement-to-tailings ratio and flow rate on the wear performance of filling pipeline

Yingying Wang et al.

Summary: Pipeline wear is a common issue in filling mines, and it is influenced by the cement-to-tailings ratio and flow rate of the filling slurry. A pipeline wear loop test system was developed to investigate the effects of different ratios and rates on wear. The results show that wear rate decreases with higher mass concentration and increases with increased flow rate, with the cement-to-tailings ratio significantly affecting wear rate at high flow rates. Mathematical models were established to describe the relationships between wear rate and slurry mass concentration, as well as between wear rate and flow rate, revealing the influence mechanism of cement-to-tailings ratio, mass concentration, and flow rate on block wear through the movement of solid particles.

POWDER TECHNOLOGY (2022)

Add to Collection

Review Green & Sustainable Science & Technology

Development, Application and Challenges of Set Pair Analysis in Environmental Science from 1989 to 2020: A Bibliometric Review

Weiqi Xiang et al.

Summary: This paper studies the development, application, and challenges of set pair analysis in environmental science over the past 32 years. The analysis reveals that the development process of set pair analysis can be divided into three stages: initial stage, rapid development stage, and steady development stage. The algorithm is mainly used for environmental assessment, diagnosis, and prediction, with the development of partial connection numbers being a new research trend. However, there are still deficiencies in set pair analysis, such as subjectivity, an imperfect theoretical system, and unbalanced development, which need to be solved in order to promote its further development in environmental science.

SUSTAINABILITY (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Deformation Analysis of an Ultra-High Arch Dam under Different Water Level Conditions Based on Optimized Dynamic Panel Clustering

Yongtao Liu et al.

Summary: During the operation period, the deformation of an ultra-high arch dam is affected by the large fluctuation of the reservoir water level. The panel data clustering theory is used to construct a spatio-temporal characteristic model of dam deformation, and three displacement component indexes are proposed to characterize dam deformation. The objective weight coefficient of clustering comprehensive distance is calculated to optimize the panel clustering deformation model. The zoning rules of the ultra-high arch dam are established using the CSP index, and the complex water level of the reservoir is simulated. Finally, the dynamic cluster analysis of dam deformation is realized.

APPLIED SCIENCES-BASEL (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Construction Risk Assessment of Deep Foundation Pit Projects Based on the Projection Pursuit Method and Improved Set Pair Analysis

Long Zhang et al.

Summary: This research proposes a novel construction risk assessment method for deep foundation pit projects. By establishing an evaluation index system and improving the calculation method, it effectively deals with the complex risks of deep foundation pit construction and has been validated in a real case study.

APPLIED SCIENCES-BASEL (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Knowledge Representation and Reasoning with an Extended Dynamic Uncertain Causality Graph under the Pythagorean Uncertain Linguistic Environment

Yu-Jie Zhu et al.

Summary: This article proposes a new type of DUCG model by integrating PULSs and the EDAS method, which can overcome the shortcomings of the traditional model and provide more accurate representation of expert knowledge, as well as handling conflicting opinions among experts.

APPLIED SCIENCES-BASEL (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Risk Assessment Model Based on Set Pair Analysis Applied to Airport Bird Strikes

Rui Wang et al.

Summary: This study constructs a risk assessment index system for bird strikes at airports from five perspectives and uses the AHP and entropy weight method to obtain comprehensive weights. The SPA is introduced to establish a bird strike risk assessment model and analyze the risk trend. The results show that the weighting method is accurate and the model can predict the risk trend effectively.

SUSTAINABILITY (2022)

Add to Collection

Article Environmental Sciences

Assessment of red tide risk by integrating CRITIC weight method, TOPSIS-ASSETS method, and Monte Carlo simulation

Yu-Lin Chen et al.

Summary: This study proposes a red tide risk assessment method using a combination of different methods, which can effectively evaluate the risk of red tides and align with the real situation.

ENVIRONMENTAL POLLUTION (2022)

Add to Collection

Article Mining & Mineral Processing

Proposing a novel comprehensive evaluation model for the coal burst liability in underground coal mines considering uncertainty factors

Jian Zhou et al.

Summary: A robust unascertained combination model is proposed to study coal burst hazard in underground coal mines, incorporating four assessment indexes, four membership functions, and weights determined through information entropy, analysis hierarchy process, and synthetic weights. The model is validated with test samples showing 100% accuracy, indicating its potential for coal burst hazard evaluation in underground coal mines.

INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Mining Method Optimization of Gently Inclined and Soft Broken Complex Ore Body Based on AHP and TOPSIS: Taking Miao-Ling Gold Mine of China as an Example

Qinqiang Guo et al.

Summary: By combining AHP and TOPSIS methods, a comprehensive evaluation system was established and successfully applied to the mining method optimization of the Miao-ling gold mine, achieving good results and providing valuable reference for similar ore bodies optimization.

SUSTAINABILITY (2021)

Add to Collection

Article Environmental Sciences

Classification of water quality in low-lying area in Vietnamese Mekong delta using set pair analysis method and Vietnamese water quality index

Nguyen Thanh Giao et al.

Summary: A study was conducted to evaluate and classify surface water quality in Dong Thap province, Vietnam using SPA and WQI_VN methods. The results showed that microbiological, nutrient, and organic matter were the main constraints on water quality, and the overall water quality was classified as medium to poor.

ENVIRONMENTAL MONITORING AND ASSESSMENT (2021)

Add to Collection

Article Engineering, Environmental

Assessing the risk degree of goafs by employing hybrid TODIM method under uncertainty

Weizhang Liang et al.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2019)

Add to Collection

Article Engineering, Civil

Adaptive Management of Coastal Aquifers Using Entropy-Set Pair Analysis-Based Three-Dimensional Sequential Monitoring Network Design

Dilip Kumar Roy et al.

JOURNAL OF HYDROLOGIC ENGINEERING (2019)

Add to Collection

Review Engineering, Chemical

A review on particulate slurry erosive wear of industrial materials: In context with pipeline transportation of mineral-slurry

Shobha Lata Sinha et al.

PARTICULATE SCIENCE AND TECHNOLOGY (2017)

Add to Collection

Article Engineering, Industrial

Application of set pair analysis method on occupational hazard of coal mining

Tan Chong et al.

SAFETY SCIENCE (2017)

Add to Collection

Article Environmental Sciences

In situ investigation of mine backfill distribution system wear rates in Canadian mines

K. J. Creber et al.

INTERNATIONAL JOURNAL OF MINING RECLAMATION AND ENVIRONMENT (2017)

Add to Collection

Article Engineering, Chemical

Flow characteristics and wear prediction of Herschel-Bulkley non-Newtonian paste backfill in pipe elbows

Nima Gharib et al.

CANADIAN JOURNAL OF CHEMICAL ENGINEERING (2017)

Add to Collection

Article Computer Science, Information Systems

Novel basic operational laws for linguistic terms, hesitant fuzzy linguistic term sets and probabilistic linguistic term sets

Xunjie Gou et al.

INFORMATION SCIENCES (2016)

Add to Collection

Article Computer Science, Information Systems

Probabilistic linguistic linguistic term sets in multi-attribute group decision making

Qi Pang et al.

INFORMATION SCIENCES (2016)

Add to Collection

Article Environmental Sciences

State-of-the-art review of backfill practices for sublevel stoping system

Muhammad Zaka Emad et al.

INTERNATIONAL JOURNAL OF MINING RECLAMATION AND ENVIRONMENT (2015)

Add to Collection

Article Geosciences, Multidisciplinary

Integrated risk assessment of flood disaster based on improved set pair analysis and the variable fuzzy set theory in central Liaoning Province, China

Enliang Guo et al.

NATURAL HAZARDS (2014)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Wear mechanism and serious wear position of casing pipe in vertical backfill drill-hole

Zhang Qin-li et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2011)

Add to Collection

Article Engineering, Mechanical

Dependence of wear behaviors of hardmetal YG8B on coarse abrasive types and their slurry concentrations

Huiyong Rong et al.

WEAR (2011)

Add to Collection

Article Mining & Mineral Processing

Development of the long-distance pipeline transport for backfill mixes in terms of Oktyabrsky Mine

A. P. Tapsiev et al.

JOURNAL OF MINING SCIENCE (2009)

Add to Collection

Article Engineering, Chemical

Pipe lining abrasion testing for paste backfill operations

David Hewitt et al.

MINERALS ENGINEERING (2009)

Add to Collection

Article Engineering, Chemical

WEAR-RESISTANT SURFACING ON THE INNER SURFACES OF PIPELINES AND VESSELS

A. I. Igolkin et al.

CHEMICAL AND PETROLEUM ENGINEERING (2009)

Add to Collection

Article Engineering, Mechanical

Nominal particle size of multi-sized particulate slurries for evaluation of erosion wear and effect of fine particles

BK Gandhi et al.

WEAR (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.