4.6 Review

Determining Spatial Variability of Elastic Properties for Biological Samples Using AFM

Related references

Note: Only part of the references are listed.
Article Microscopy

Is it mathematically correct to fit AFM data (obtained on biological materials) to equations arising from Hertzian mechanics?

S. V. Kontomaris et al.

Summary: This paper provides conclusive answers to the mathematical question regarding the fitting approach in testing soft biological samples and introduces a new tool, depth-dependent mechanical properties maps, for nanomechanical characterization of biological samples.

MICRON (2023)

Article Chemistry, Physical

Nano-structural stiffness measure for soft biomaterials of heterogeneous elasticity

Shu-Wen W. Chen et al.

Summary: Measuring the structural stiffness is a method to study the elastic response of materials under external indentation, with the goal of revealing how nanostructured components or physiological circumstances affect the material's elastic behavior. In this study, atomic force microscopy (AFM) was used with a nano-scale pyramidal tip to indent the surfaces of polyacrylamide gels and Arabidopsis thaliana seedling roots with different softness. The stiffness-depth curve derived from the measured force showed heterogeneous elasticity. The responding force was decomposed into depth-impact, Hookean, and tip-shape components, called trimechanic, allowing the researchers to observe how these three restoring nanomechanics change with depth. The trimechanic theory provides insights into the restoring nanomechanics of indented materials and can differentiate the softness between different gel categories.

NANOSCALE HORIZONS (2023)

Article Engineering, Biomedical

Modulation of the biophysical and biochemical properties of collagen by glycation for tissue engineering applications

Mina Vaez et al.

Summary: The presence of intramolecular and intermolecular crosslinks modulates the structural and functional properties of collagen. Advanced Glycation End-products (AGEs) can form intermolecular crosslinks by binding to neighboring proteins. This research investigates the hypothesis that the accumulation of AGEs in collagen decreases its proteolytic degradation rates while increasing its stiffness. Through various techniques, including fluorescence lifetime imaging and Fourier-transform infrared spectroscopy, the researchers detect biochemical changes in collagen scaffolds during the glycation process. Results show that the accumulation of AGEs leads to enhanced water sorption, differential elastic modulus, and slower proteolytic degradation behavior in collagen fibrils and scaffolds.

ACTA BIOMATERIALIA (2023)

Article Education, Scientific Disciplines

Revisiting the theory behind AFM indentation procedures. Exploring the physical significance of fundamental equations

Stylianos-Vasileios Kontomaris et al.

Summary: This paper introduces the fundamental contact mechanics models used in atomic force microscopy (AFM) indentation methods, which involve the interaction between an axisymmetric indenter and an elastic half-space. A simplified 'equivalent' physical system is proposed to correlate basic magnitudes such as applied force, Young's modulus, contact radius, and indentation depth. The equations representing these relationships are derived using fundamental physics, providing a strong theoretical background for AFM indentation theory for students and non-specialists in contact mechanics.

EUROPEAN JOURNAL OF PHYSICS (2022)

Article Microscopy

The Hertzian theory in AFM nanoindentation experiments regarding biological samples: Overcoming limitations in data processing

S. V. Kontomaris et al.

Summary: This review discusses the procedures for accurately processing force-indentation curves in biological sample experiments, including the avoidance methods for common errors such as the shape of the AFM tip, the range of data of the sample's approximate linear elastic response, the sample's viscoelasticity, the sample's shape, and the substrate effects.

MICRON (2022)

Review Chemistry, Physical

Atomic Force Microscopy Nanoindentation Method on Collagen Fibrils

Stylianos Vasileios Kontomaris et al.

Summary: Atomic Force Microscopy nanoindentation method is a powerful technique for the nano-mechanical characterization of bio-samples. There are inconsistencies in determining the Young's modulus of collagen fibrils at the nanoscale, possibly due to parameters such as the heterogeneous structure of the fibrils, water content, data processing errors, and uncertainties in probe calibration.

MATERIALS (2022)

Article Engineering, Biomedical

Mechanical properties of collagen fibrils determined by buckling analysis

Emilie Gachon et al.

Summary: The bending properties of individual collagen fibrils at the nanometer scale were determined using the theory of column-buckling. The results showed that this simple approach can quickly and accurately determine mechanical properties, avoiding some issues of other methods.

ACTA BIOMATERIALIA (2022)

Article Chemistry, Physical

Nanomechanical Mapping of Hard Tissues by Atomic Force Microscopy: An Application to Cortical Bone

Marco Bontempi et al.

Summary: This study proposes a method to construct elasticity maps of hard tissues using AFM nanoindentation, and successfully applies it to sheep cortical bone. The method allows for simultaneous processing of elastic and inelastic sample deformation, and quantitatively assesses differences between sample regions with different structures and compositions.

MATERIALS (2022)

Article Engineering, Biomedical

Revealing Layer-Specific Ultrastructure and Nanomechanics of Fibrillar Collagen in Human Aorta via Atomic Force Microscopy Testing: Implications on Tissue Mechanics at Macroscopic Scale

Meisam Asgari et al.

Summary: This study investigates the ultrastructural and nanomechanical properties of arterial tissues using atomic force microscopy and quasistatic tensile tests. The stiffness of the tissue layers and their correspondence to small-scale mechanical properties and macroscopic behavior are explored. The study also examines stiffness gradients across different layers and the effects of deformation rate. This methodology can be applied to investigate ECM remodeling associated with vascular diseases.

ADVANCED NANOBIOMED RESEARCH (2022)

Article Engineering, Biomedical

A matter of size? Material, structural and mechanical strategies for size adaptation in the elytra of Cetoniinae beetles

Meisam Asgari et al.

Summary: The study revealed the morphological and mechanical characteristics of beetle elytra and its natural adaptation strategies to body size. By comparing different species, the research lays the foundation for future systematic, comparative analyses of beetle biomechanics, scaling, and phylogenetics.

ACTA BIOMATERIALIA (2021)

Article Education, Scientific Disciplines

A novel approximate method to calculate the force applied on an elastic half space by a rigid sphere

S. Kontomaris et al.

Summary: This paper discusses the calculation method of the applied force on an elastic half space when a rigid sphere is pushed towards it, under the condition that the deformation depth is significantly smaller compared to the sphere's radius. It also addresses the scenario when the deformation depth is larger and provides a relative discussion on the application of the results.

EUROPEAN JOURNAL OF PHYSICS (2021)

Article Chemistry, Analytical

Nano-Scale Stiffness and Collagen Fibril Deterioration: Probing the Cornea Following Enzymatic Degradation Using Peakforce-QNM AFM

Ahmed Kazaili et al.

Summary: This study investigates the ultrastructure and nanomechanical properties of porcine cornea following incubation with alpha-amylase and collagenase. The research found that collagen fibril diameters were decreased following incubation with amylase, but elastic modulus, diameter, and D-periodicity were greatly reduced in collagenase-treated samples. The enzymatic treatment may help in understanding keratoconus and potentially developing an animal model for this eye disorder.

SENSORS (2021)

Article Multidisciplinary Sciences

3D mechanical characterization of single cells and small organisms using acoustic manipulation and force microscopy

Nino F. Laeubli et al.

Summary: The authors combined a micro-force sensor with an acoustically controlled manipulation device to rotate biological samples and quantify mechanical properties at multiple regions of interest within a specimen. The versatility of this tool was demonstrated through the analysis of single Lilium longiflorum pollen grains and Caenorhabditis elegans nematodes, revealing local variations in apparent stiffness and providing previously inaccessible information on mechanical properties for biophysical modeling.

NATURE COMMUNICATIONS (2021)

Article Engineering, Biomedical

Microstructural and mechanical characterization of the layers of human descending thoracic aortas

Marco Amabili et al.

Summary: The mechanical properties of human aortas are closely related to the layered tissue and microstructure at different length scales. Collagen fibers carry most of the load at larger strains, while their orientation distributions differ depending on the observation direction.

ACTA BIOMATERIALIA (2021)

Article Materials Science, Multidisciplinary

The average Young's modulus as a physical quantity for describing the depth-dependent mechanical properties of cells

S. Kontomaris et al.

Summary: Hertzian mechanics is a useful tool for data processing in AFM nanoindentation experiments on cells, but results may vary significantly between research groups. Developing novel methods for assessing the mechanical properties of cells is crucial.

MECHANICS OF MATERIALS (2021)

Article Multidisciplinary Sciences

Triangular correlation (TrC) between cancer aggressiveness, cell uptake capability, and cell deformability

Yifat Brill-Karniely et al.

SCIENCE ADVANCES (2020)

Article Materials Science, Multidisciplinary

Hertz model or Oliver & Pharr analysis? Tutorial regarding AFM nanoindentation experiments on biological samples

S. Kontomaris et al.

MATERIALS RESEARCH EXPRESS (2020)

Article Multidisciplinary Sciences

Non-invasive imaging of Young's modulus and Poisson's ratio in cancers in vivo

Md Tauhidul Islam et al.

SCIENTIFIC REPORTS (2020)

Article Gastroenterology & Hepatology

Tracking Fenestrae Dynamics in Live Murine Liver Sinusoidal Endothelial Cells

Bartlomiej Zapotoczny et al.

HEPATOLOGY (2019)

Article Biochemical Research Methods

Hydration and nanomechanical changes in collagen fibrils bearing advanced glycation end-products

Orestis G. Andriotis et al.

BIOMEDICAL OPTICS EXPRESS (2019)

Article Engineering, Biomedical

Material anisotropy and elasticity of cortical and trabecular bone in the adult mouse femur via AFM indentation

Meisam Asgari et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2019)

Review Instruments & Instrumentation

Atomic Force Microscopy on Biological Materials Related to Pathological Conditions

Andreas Stylianou et al.

SCANNING (2019)

Review Physics, Applied

Atomic force microscopy-based mechanobiology

Michael Krieg et al.

NATURE REVIEWS PHYSICS (2019)

Article Biochemical Research Methods

A comparison of methods to assess cell mechanical properties

Pei-Hsun Wu et al.

NATURE METHODS (2018)

Article Chemistry, Multidisciplinary

AFM Identification of Beetle Exocuticle: Bouligand Structure and Nanofiber Anisotropic Elastic Properties

Ruiguo Yang et al.

ADVANCED FUNCTIONAL MATERIALS (2017)

Article Multidisciplinary Sciences

Measuring nanoscale viscoelastic parameters of cells directly from AFM force-displacement curves

Yuri M. Efremov et al.

SCIENTIFIC REPORTS (2017)

Article Multidisciplinary Sciences

Standardized Nanomechanical Atomic Force Microscopy Procedure (SNAP) for Measuring Soft and Biological Samples

Hermann Schillers et al.

SCIENTIFIC REPORTS (2017)

Article Chemistry, Multidisciplinary

Nano-mechanical signature of brain tumours

Gabriele Ciasca et al.

NANOSCALE (2016)

Article Materials Science, Biomaterials

Discrimination Between Normal and Cancerous Cells Using AFM

Malgorzata Lekka

BIONANOSCIENCE (2016)

Article Multidisciplinary Sciences

Fast, multi-frequency, and quantitative nanomechanical mapping of live cells using the atomic force microscope

Alexander X. Cartagena-Rivera et al.

SCIENTIFIC REPORTS (2015)

Article Engineering, Biomedical

Nanomechanics of Cells and Biomaterials Studied by Atomic Force Microscopy

Jason I. Kilpatrick et al.

ADVANCED HEALTHCARE MATERIALS (2015)

Article Instruments & Instrumentation

The Effects of UV Irradiation on Collagen D-band Revealed by Atomic Force Microscopy

Stylianos V. Kontomaris et al.

SCANNING (2015)

Article Engineering, Biomedical

Nanomechanical assessment of human and murine collagen fibrils via atomic force microscopy cantilever-based nanoindentation

Orestis G. Andriotis et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2014)

Article Instruments & Instrumentation

AtomicJ: An open source software for analysis of force curves

Pawel Hermanowicz et al.

REVIEW OF SCIENTIFIC INSTRUMENTS (2014)

Article Biophysics

The effects of confluency on cell mechanical properties

Yu. M. Efremov et al.

JOURNAL OF BIOMECHANICS (2013)

Article Biochemistry & Molecular Biology

Cancer cell detection in tissue sections using AFM

Malgorzata Lekka et al.

ARCHIVES OF BIOCHEMISTRY AND BIOPHYSICS (2012)

Article Biophysics

Depth-sensing analysis of cytoskeleton organization based on AFM data

Katarzyna Pogoda et al.

EUROPEAN BIOPHYSICS JOURNAL WITH BIOPHYSICS LETTERS (2012)

Review Microscopy

Cancer cell recognition - Mechanical phenotype

Malgorzata Lekka et al.

MICRON (2012)

News Item Nanoscience & Nanotechnology

ATOMIC FORCE MICROSCOPY A tip for diagnosing cancer

Malgorzata Lekka

NATURE NANOTECHNOLOGY (2012)

Article Nanoscience & Nanotechnology

Mapping nanomechanical properties of live cells using multi-harmonic atomic force microscopy

A. Raman et al.

NATURE NANOTECHNOLOGY (2011)

Article Biochemistry & Molecular Biology

Nanoscale measurements of the assembly of collagen to fibrils

Vamsi K. Yadavalli et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2010)

Article Nanoscience & Nanotechnology

Mechanics of nanowire/nanotube in-surface buckling on elastomeric substrates

J. Xiao et al.

NANOTECHNOLOGY (2010)

Article Nanoscience & Nanotechnology

Early detection of aging cartilage and osteoarthritis in mice and patient samples using atomic force microscopy

Martin Stolz et al.

NATURE NANOTECHNOLOGY (2009)

Letter Nanoscience & Nanotechnology

Applicability of AFM in cancer detection

M. Lekka et al.

NATURE NANOTECHNOLOGY (2009)

Review Nanoscience & Nanotechnology

Atomic force microscopy and indentation force measurement of bone

Philipp J. Thurner

WILEY INTERDISCIPLINARY REVIEWS-NANOMEDICINE AND NANOBIOTECHNOLOGY (2009)

Article Physics, Applied

Effects of hydration on the mechanical response of individual collagen fibrils

Colin A. Grant et al.

APPLIED PHYSICS LETTERS (2008)

Article Biochemistry & Molecular Biology

AFM indentation study of breast cancer cells

Q. S. Li et al.

BIOCHEMICAL AND BIOPHYSICAL RESEARCH COMMUNICATIONS (2008)

Article Biophysics

Mechanical properties of collagen fibrils

Marco P. E. Wenger et al.

BIOPHYSICAL JOURNAL (2007)

Article Physics, Applied

Determination of the elastic modulus of native collagen fibrils via radial indentation

August J. Heim et al.

APPLIED PHYSICS LETTERS (2006)

Article Orthopedics

Viscoelastic properties of zonal articular chondrocytes measured by atomic force microscopy

E. M. Darling et al.

OSTEOARTHRITIS AND CARTILAGE (2006)

Article Orthopedics

The split-line pattern of the distal femur: A consideration in the orientation of autologous cartilage grafts

S Below et al.

ARTHROSCOPY-THE JOURNAL OF ARTHROSCOPIC AND RELATED SURGERY (2002)