☆ 4.6 Article

Microfluidic Chip Fabrication of Fused Silica Using Microgrinding

MICROMACHINES (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Multidisciplinary

A Study of Microdrilling of Fused Silica Using EDMed PCD Tools

Pyeong An Lee et al.

Summary: This study investigates the microdrilling of fused silica using polycrystalline diamond tools fabricated by electrical discharge machining. By adjusting drilling conditions to reduce peak forces and crack formations, some progress was made in this research.

APPLIED SCIENCES-BASEL (2022)

Add to Collection

Article Mechanics

High-throughput nanoscale liposome formation via electrohydrodynamic-based micromixer

L. Trabzon et al.

Summary: This study aims to simulate the high-throughput formation of nanoscale liposomes using an active electrohydrodynamic-based micromixer. The presence of an electrical field inside the microchannel generates chaotic advection, leading to an increase in the formation of liposomes. The Taguchi method is used to optimize the experimental design, resulting in a 5.3% error between the predicted and simulated results.

PHYSICS OF FLUIDS (2022)

Add to Collection

Article Mechanics

Experimental study on the performance of a mini-scale Y-type mixer with two liquid metal-enabled pumps

A. Mohammad Jafarpour et al.

Summary: This study experimentally investigated the mixing process of two liquids inside an open minichannel in the presence of liquid metal and an electric field. The effects of mixing angle, applied voltage, and Reynolds number on the mixing process were analyzed. The results showed that increasing the voltage signal led to an increase in mixing intensity, creating chaotic advection in the minichannel. The input angle also played a crucial role in the mixing process.

PHYSICS OF FLUIDS (2022)

Add to Collection

Review Engineering, Manufacturing

Fabrication Methods for Microscale 3D Structures on Silicon Carbide

Younghak Cho et al.

Summary: Silicon carbide (SiC) is a promising material for various industrial applications due to its wide bandgap, high thermal stability, and wear resistance. However, fabricating micro-features on SiC is costly and time-consuming. This paper reviews the state-of-the-art processes for fabricating micro-3D structures on SiC and discusses their advantages and limitations to guide process selection.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Machining characteristics of glass substrates containing chemical components in femtosecond laser helical drilling

Hyeon-Min Lee et al.

Summary: In this study, the machining characteristics of glass substrates containing chemical components were investigated for femtosecond laser helical drilling. The research found that the drilling conditions for each glass substrate were affected by its chemical components, particularly the percentage of Al(2)O(3) and MgO components. Increasing the percentage of Al(2)O(3) and MgO components in the glass substrates resulted in a decrease in ablation threshold energy and greater vertical speed of the laser head.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Experimental Study on Micro-Grinding of Ceramics for Micro-Structuring

Yung Na et al.

Summary: In this study, micro-grinding was conducted to investigate the machining performance of alumina and zirconia. The use of polycrystalline diamond (PCD) as the tool material and micro-electrical discharge machining (EDM) for fabricating PCD micro-tools were effective in machining hard and brittle ceramics. Controlling the working capacitance in micro-EDM allowed for achieving different edge radii and tool surface roughness, resulting in reduced cutting force and improved surface finish.

APPLIED SCIENCES-BASEL (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Interface study of the fluids in passive micromixers by altering the geometry of inlets

S. Rahbarshahlan et al.

Summary: This study investigated the improvement of mixing process in a T-shape micromixer, emphasizing the significance of mixing process in microfluidics system. The results showed that an increase in Reynolds number generally increased the mixing coefficient, but specific conditions could disrupt this trend. Factors influencing mixing quality include location, rotation direction, vortexes, and Reynolds number.

MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2021)

Add to Collection

Article Green & Sustainable Science & Technology

An Analytical Model for Grinding Force Prediction in Ultra-Precision Machining of WC with PCD Micro Grinding Tool

Sangjin Maeng et al.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2020)

Add to Collection

Review Engineering, Manufacturing

Microchannel Fabrication on Glass Materials for Microfluidic Devices

Jihong Hwang et al.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2019)

Add to Collection

Article Automation & Control Systems

Experimental investigation of machinability and surface quality of sapphire machined with polycrystalline diamond micro-milling tool

Kazutoshi Katahira et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Surface polishing of quartz-based microfluidic channels using CO2 laser

Seungman Jung et al.

MICROFLUIDICS AND NANOFLUIDICS (2016)

Add to Collection

Article Engineering, Manufacturing

Fabrication of microchannels: A review

Shashi Prakash et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2015)

Add to Collection

Article Engineering, Manufacturing

Hybrid Micromachining of Glass Using ECDM and Micro Grinding

Xuan Doan Cao et al.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2013)

Add to Collection

Article Engineering, Industrial

A study on microgrinding of brittle and difficult-to-cut glasses using on-machine fabricated poly crystalline diamond (PCD) tool

Asma Perveen et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2012)

Add to Collection

Article Engineering, Electrical & Electronic

Ultradeep fused silica glass etching with an HF-resistant photosensitive resist for optical imaging applications

John M. Nagarah et al.

JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2012)

Add to Collection

Article Engineering, Industrial

Cutting process of glass with inclined ball end mill

Takashi Matsumura et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)

Add to Collection

Article Engineering, Electrical & Electronic

Micro machining glass with polycrystalline diamond tools shaped by micro electro discharge machining

CJ Morgan et al.

JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2004)

Add to Collection

Article Multidisciplinary Sciences

Monolithic microfabricated valves and pumps by multilayer soft lithography

MA Unger et al.

SCIENCE (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.