☆ 4.6 Article

A Biodegradable Bioactive Glass-Based Hydration Sensor for Biomedical Applications

MICROMACHINES (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Ceramics

Evaluation of novel composition (SiO2-CaO-Na2O-P2O5, SrO-CuO) degradable amorphous silicate glasses properties and comprehensive characterization of the thermal features

Ali Can Ozarslan et al.

Summary: This study comprehensively examines the structural, chemical, and thermal properties of a novel composition of SiO2-CaO-Na2O-P2O5 amorphous silicate glass with the incorporation of SrO and CuO. The experimental density, oxygen density, hardness, and chemical and phase composition of the glasses were determined. The thermal behavior, including viscosity flow and crystallization kinetics, was investigated using non-isothermal methods. The study found that the incorporation of Sr and Cu affected the glass stability and initial dissolution, and the glasses had different crystallization mechanisms.

CERAMICS INTERNATIONAL (2023)

Add to Collection

Review Polymer Science

Implantable application of polymer-based biosensors

Xiangyuan Mei et al.

Summary: This article systematically reviews the development of implantable electronic sensors based on polymer materials, introducing their unique properties and applications in device fabrication. Strategies for integrating polymers with implantable sensors are summarized, along with the biosensing applications of polymer-based implantable devices. The article also envisions how advances in polymer materials may facilitate the development of intelligent sensors with broader applications in vivo.

JOURNAL OF POLYMER SCIENCE (2022)

Add to Collection

Review Chemistry, Analytical

Current state and future prospects of sensors for evaluating polymer biodegradability and sensors made from biodegradable polymers: A review

Lai Mun Koh et al.

Summary: This paper compares and contrasts sensors capable of identifying biodegradable polymers and discusses their advantages and limitations. The use of sensors for biodegradability detection represents an innovative approach, and there is a wide range of sensor materials with different types and applications.

ANALYTICA CHIMICA ACTA (2022)

Add to Collection

Article Engineering, Biomedical

Brain-on-a-chip: Recent advances in design and techniques for microfluidic models of the brain in health and disease

Leyla Amirifar et al.

Summary: Recent advances in biomaterials, microfabrication, microfluidics, and cell biology have led to the development of organ-on-a-chip devices that can replicate key functions of various organs. These platforms promise to provide novel insights into physiological events, including disease mechanisms, and evaluate the impact of external interventions such as drug administration. Therefore, the neuroscience field is expected to benefit greatly from these innovative tools.

BIOMATERIALS (2022)

Add to Collection

Article Chemistry, Applied

Porous and conductive cellulose nanofiber/carbon nanotube foam as a humidity sensor with high sensitivity

Penghui Zhu et al.

Summary: In this study, a humidity sensor with high sensitivity based on cellulose nanofiber/carbon nano tube hybrid foam was developed. The sensor utilizes a porous structure design to provide more contact interface for water molecules adsorption and adjust the conductivity of the foam, resulting in high humidity sensitivity, excellent linearity, and good long-term stability. It can find applications in human breath and fingertip humidity monitoring.

CARBOHYDRATE POLYMERS (2022)

Add to Collection

Review Critical Care Medicine

Intracranial pressure: current perspectives on physiology and monitoring

Gregory W. J. Hawryluk et al.

Summary: Intracranial pressure (ICP) monitoring is essential in the clinical care of life-threatening brain insults. It helps warn of expanding intracranial mass lesions, prevent or treat herniation events, and facilitate the calculation of cerebral perfusion pressure. However, controversies still exist regarding indications for monitoring, treatment thresholds, and management of intracranial hypertension.

INTENSIVE CARE MEDICINE (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Study the structural, physical, and optical properties of CaO-MgO-SiO2-CaF2 bioactive glasses with Na2O and P2O5 dopants

Ebrahim A. Mahdy et al.

Summary: A new bioactive CaO-MgO-CaF2-SiO2 glass system with Na2O/MgO and P(2)O5/SiO2 substitutions was synthesized. Different properties of the synthesized glasses were characterized, including structural, mechanical, physical, and optical properties. The results showed that the Na2O and P2O5 dopants influenced the glass structure and associated physical properties.

MATERIALS CHEMISTRY AND PHYSICS (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Biodegradable Implantable Sensors: Materials Design, Fabrication, and Applications

Nureddin Ashammakhi et al.

Summary: The ability to monitor diseases, therapies, and their effects on the body is crucial in modern healthcare. Biodegradable sensors offer a potential solution to issues with traditional implantable sensors, but they are currently limited by size and material selection.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Review Engineering, Biomedical

Recent Advances in Printing Technologies of Nanomaterials for Implantable Wireless Systems in Health Monitoring and Diagnosis

Robert Herbert et al.

Summary: The development of wireless implantable sensors and integrated systems, enabled by advances in flexible and stretchable electronics technologies, is emerging to advance human health monitoring, diagnosis, and treatment. Progress in material and fabrication strategies allows for implantable electronics for unobtrusive monitoring via seamlessly interfacing with tissues and wirelessly communicating. Combining new nanomaterials and customizable printing processes offers unique possibilities for high-performance implantable electronics. This report summarizes recent progress and advances in nanomaterials and printing technologies for the development of wireless implantable sensors and electronics, reviewing challenges in implantable applications and discussing demonstrations of wireless implantable electronics and their advantages.

ADVANCED HEALTHCARE MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Hydrogel-Enabled Transfer-Printing of Conducting Polymer Films for Soft Organic Bioelectronics

Shiming Zhang et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Inorganic materials for transient electronics in biomedical applications

Yeonsik Choi et al.

MRS BULLETIN (2020)

Add to Collection

Article Chemistry, Analytical

The Effect of Diclofenac Sodium-Loaded Poly(Lactide-co-Glycolide) Rods on Bone Formation and Inflammation: A Histological and Histomorphometric Study in the Femora of Rats

Karoline M. Reich et al.

MICROMACHINES (2020)

Add to Collection

Article Multidisciplinary Sciences

Bioresorbable optical sensor systems for monitoring of intracranial pressure and temperature

Jiho Shin et al.

SCIENCE ADVANCES (2019)

Add to Collection

Article Engineering, Biomedical

Bioresorbable pressure sensors protected with thermally grown silicon dioxide for the monitoring of chronic diseases and healing processes

Jiho Shin et al.

NATURE BIOMEDICAL ENGINEERING (2019)

Add to Collection

Review Nanoscience & Nanotechnology

Tissue-electronics interfaces: from implantable devices to engineered tissues

Ron Feiner et al.

NATURE REVIEWS MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Degradation behavior and mechanical strength of Mg-Zn-Ca bulk metallic glass composites with Ti particles as biodegradable materials

Pei-Chun Wong et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Add to Collection

Review Chemistry, Multidisciplinary

Wearable Chemical Sensors: Present Challenges and Future Prospects

Amay J. Bandodkar et al.

ACS SENSORS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Biodegradable Materials for Multilayer Transient Printed Circuit Boards

Xian Huang et al.

ADVANCED MATERIALS (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Density-structure correlations in fluoride-containing bioactive glasses

D. S. Brauer et al.

MATERIALS CHEMISTRY AND PHYSICS (2011)

Add to Collection

Article Engineering, Biomedical

Fluoride-containing bioactive glasses: Effect of glass design and structure on degradation, pH and apatite formation in simulated body fluid

Delia S. Brauer et al.

ACTA BIOMATERIALIA (2010)

Add to Collection

Review Chemistry, Physical

Bioactive Glass and Glass-Ceramic Scaffolds for Bone Tissue Engineering

Lutz-Christian Gerhardt et al.

MATERIALS (2010)

Add to Collection

Article Chemistry, Physical

MgZnCa glasses without clinically observable hydrogen evolution for biodegradable implants

Bruno Zberg et al.

NATURE MATERIALS (2009)

Add to Collection

Article Materials Science, Multidisciplinary

Design strategy for microalloyed ultra-ductile magnesium alloys

A. C. Haenzi et al.

PHILOSOPHICAL MAGAZINE LETTERS (2009)

Add to Collection

Article Engineering, Electrical & Electronic

Development of microfluidic device for electrical/physical characterization of single cell

YH Cho et al.

JOURNAL OF MICROELECTROMECHANICAL SYSTEMS (2006)

Add to Collection

Article Engineering, Biomedical

Formation of hydroxyapatite onto glasses of the CaO-MgO-SiO2 system with B2O3, Na2O, CaF2 and P2O5 additives

S Agathopoulos et al.

BIOMATERIALS (2006)

Add to Collection

Review Orthopedics

Oxygen and reactive oxygen species in cartilage degradation: friends or foes?

Y Henrotin et al.

OSTEOARTHRITIS AND CARTILAGE (2005)

Add to Collection

Article Materials Science, Multidisciplinary

Fluoride release from dental resin composites

G Furtos et al.

MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS (2005)

Add to Collection

Article Chemistry, Physical

Electrical conductivity and relaxation frequency of lithium borosilicate glasses

LF Maia et al.

SOLID STATE IONICS (2004)

Add to Collection

Article Materials Science, Ceramics

Mechanism of crystallization of pyroxene-based glass-ceramic glazes

FJ Torres et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2004)

Add to Collection

Article Biochemistry & Molecular Biology

Impedance-based detection of DNA sequences using a silicon transducer with PNA as the probe layer

A Macanovic et al.

NUCLEIC ACIDS RESEARCH (2004)

Add to Collection

Article Chemistry, Physical

Synthesis routes for bioactive sol-gel glasses:: Alkoxides versus nitrates

A Rámila et al.

CHEMISTRY OF MATERIALS (2002)

Add to Collection

Article Chemistry, Physical

Electric conductivity and relaxation in fluoride, fluorophosphate and phosphate glasses: analysis by impedance spectroscopy

S Lanfredi et al.

SOLID STATE IONICS (2002)

Add to Collection

Article Materials Science, Ceramics

Development of glass-ceramics by sintering and crystallization of fine powders of calcium-magnesium-aluminosilicate glass

DU Tulyaganov et al.

CERAMICS INTERNATIONAL (2002)

Add to Collection

Article Engineering, Biomedical

Dose-dependent behavior of bioactive glass dissolution

JR Jones et al.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.