☆ 4.6 Article

A general synthesis of inorganic nanotubes as high-rate anode materials of sodium ion batteries

JOURNAL OF ENERGY CHEMISTRY (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Applied

A hollow tubular NiCo layacknered double hydroxide@Ag nanowire structure for high-power-density flexible aqueous Ni//Zn battery

Xiaoyang Xuan et al.

Summary: Flexible aqueous Ni//Zn batteries have been recognized as potential candidates for energy storage in flexible electronics. A new hollow tubular structure comprising a conductive silver nanowire (AgNW) wrapped by active NiCo layered double hydroxide (LDH) was designed to enhance the electrical conductivity, improve charge/mass transfer kinetics, and facilitate ion penetration. The optimized composite showed higher specific capacity and power density, demonstrating its promising potentials for flexible energy storage applications.

JOURNAL OF ENERGY CHEMISTRY (2022)

Add to Collection

Article Chemistry, Applied

Nitrogen and fluorine co-doped TiO2/carbon microspheres for advanced anodes in sodium-ion batteries: High volumetric capacity, superior power density and large areal capacity

Dan Lv et al.

Summary: In this study, N/F co-doped TiO2/carbon microspheres were synthesized as an anode material for Na-ion batteries, achieving high tap density and large volumetric capacity while exhibiting excellent rate performance and cycling stability.

JOURNAL OF ENERGY CHEMISTRY (2022)

Add to Collection

Article Chemistry, Physical

Mechanistic insights into the electrochemical Li/Na/K-ion storage for aqueous bismuth anode

Tingting Qin et al.

Summary: In this study, the interaction mechanism between bismuth (Bi) and alkali metal ions (Li+, Na+ and K+) in aqueous alkali-metal ion batteries (ARABs) was investigated using various experimental and theoretical methods. It was found that Bi exhibited high specific capacity for Na+ and K+ storage, but lower capacity for Li+ storage. The irreversibility of Li+ dealloying from Bi matrix due to large adsorption energy resulted in poor rate performance and cycling stability. The large volume expansion caused by the largest radius of K+ contributed to the poor cycling stability for K+ storage. Bi showed superior performance for Na+ storage due to the appropriate interaction strength between Bi and Na+.

ENERGY STORAGE MATERIALS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Nitrogen and phosphorous co-doped hierarchical meso-microporous carbon nanospheres with extraordinary lithium storage for high-performance lithium-ion capacitors

Tong Li et al.

Summary: Lithium-ion capacitors (LICs) with hierarchical meso-microporous carbon nanospheres as the anode exhibit improved energy density, rate capability, and cycle stability. The carbon nanosphere anode enables a high reversible capability and the LIC demonstrates high energy density, extremely high power density, and long-term cyclability.

SCIENCE CHINA-MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Highly Durable and Ultrafast Cycling of Dual-Ion Batteries via In Situ Construction of Cathode-Electrolyte Interphase

Zhenjie Cheng et al.

Summary: Dual-ion batteries with graphite as the cathode suffer from structural damage and electrode/electrolyte interface instability, leading to poor electrochemical performance. Adding TMSP as an electrolyte additive can scavenge deleterious species and create a uniform cathode-electrolyte interphase layer on graphite, greatly improving the electrochemical performance.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

TiO2 bunchy hierarchical structure with effective enhancement in sodium storage behaviors

Shen Liu et al.

Summary: The study demonstrates that by stringing porous TiO2(B) nanosheets on one-dimensional TiO2 nanowires, a novel bunchy hierarchical structure is achieved, resulting in higher sodium storage capacity and cycling stability. The sodium storage mechanism analysis confirms the high structural stability of this structure during sodiation/desodiation processes.

CARBON ENERGY (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Controllable Synthesis of Hollow Microtubular Covalent Organic Frameworks as an Enzyme-Immobilized Platform for Enhancing Catalytic Activity

Chao Zhong et al.

Summary: This study introduces a simple template-free strategy for the controllable synthesis of hollow microtubular COFs with high crystallinity and surface area, serving as an ideal host material for enzymes. The resulting biocomposites exhibit high catalytic performance and can be effectively utilized for rapid and efficient protein hydrolysis. This work paves the way for the controllable synthesis of hollow microtubular COFs and expands their application as a promising platform for enzyme immobilization.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Hydrogen Bubble-Directed Tubular Structure: A Novel Mechanism to Facilely Synthesize Nanotube Arrays with Controllable Wall Thickness

Yanfang Shen et al.

Summary: This study discusses the fabrication of nanowire and nanotube arrays using electrodeposition methods and anodized alumina oxide templates, as well as the growth mechanism of metallic nanotubes controlled by conductive salts to improve H-2 concentration. It also explores the structural and functional differences between nanotube and nanowire arrays, and the impact of varying wall thickness on their magnetic properties.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Materials Science, Multidisciplinary

General Strategy for Fabrication of Ordered One Dimensional Inorganic Structures by Electrospinning: Structural Evolution From Belt to Solid via Hollow Tubes

Anitha Senthamizhan et al.

Summary: A general route to prepare structurally well-defined 1D zinc oxide (ZnO) structures by a single-spinneret electrospinning method coupled with thermal treatment is demonstrated for the first time, showing high-performance materials for catalytic application. The method allows for chronological structural evolution from tubular to solid fiber structures composed of nanograins, showcasing excellent photocatalytic performance.

ADVANCED ENGINEERING MATERIALS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Promises and Challenges of Next-Generation Beyond Li-ion Batteries for Electric Vehicles and Grid Decarbonization

Yaosen Tian et al.

Summary: The significant advancements in performance and cost of lithium-ion batteries have made them the preferred technology for electrical energy storage, but they may not meet all the requirements for large-scale applications. Hence, exploration of beyond lithium-ion technologies including sodium-ion batteries, potassium-ion batteries, all-solid-state batteries, and multivalent batteries is accelerating.

CHEMICAL REVIEWS (2021)

Add to Collection

Article Chemistry, Physical

Synergistic Effect of Nitrogen and Sulfur Dual-Doping Endows TiO2 with Exceptional Sodium Storage Performance

Mengna Fan et al.

Summary: Nitrogen and sulfur dual-doping in TiO2 significantly enhances electronic conductivity and sodium ion transfer kinetics, leading to improved rate performance and cycling stability in sodium-ion batteries.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Ultra-low-density digitally architected carbon with a strutted tube-in-tube structure

Jianchao Ye et al.

Summary: The study demonstrates that by designing tube-in-tube beam structures, low-density structural materials can be strengthened, slowing down the decrease of stiffness with decreasing density, achieving large deformation recovery and high specific damping merit index.

NATURE MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Templating Synthesis of Metal-Organic Framework Nanofiber Aerogels and Their Derived Hollow Porous Carbon Nanofibers for Energy Storage and Conversion

Wang Zhang et al.

Summary: By utilizing MOF nanofiber aerogels as carbon precursors, well-dispersed hollow porous carbon nanofibers can be efficiently synthesized to serve as hosts for sulfur encapsulation and electrocatalysts for ORR. The dispersed HPCNs exhibit enhanced electrochemical performance, indicating that the dispersion state of nanomaterials significantly influences their final properties and potential applications in energy storage and conversion.

SMALL (2021)

Add to Collection

Article Multidisciplinary Sciences

Morphology and mechanism of highly selective Cu(II) oxide nanosheet catalysts for carbon dioxide electroreduction

Xingli Wang et al.

Summary: Copper oxides (CuO) selectively catalyze the electrochemical reduction of CO2 to hydrocarbons and oxygenates. Here, the authors study the activity and morphological evolution of 2D CuO nanosheets under applied electrode potentials to conclude the primacy of dendritic shapes and involvement of a new coupling pathway.

NATURE COMMUNICATIONS (2021)

Add to Collection

Article Engineering, Environmental

Accurate design of hollow/tubular porous g-C3N4 from melamine-cyanuric acid supramolecular prepared with mechanochemical method

Hongyun Niu et al.

Summary: The melamine-cyanuric acid (MA-CA) supramolecular is considered an ideal starting material for preparing tubular or hollow g-C3N4, with diverse morphologies being achieved depending on preparation conditions. Using a mechanochemical technique, g-C3N4 samples with hollow nanorods, nanotubes, and porous nanosheets shapes were obtained, showing varied photocatalytic performance. The differences in photocatalytic activity are attributed to factors such as surface area and photogenerated carrier separation ability.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Chemistry, Physical

Electrostatic self-assembly construction of 2D MoS2 wrapped hollow Fe3O4 nanoflowers@1D carbon tube hybrids for self-cleaning highperformance microwave absorbers

Xiang Zhang et al.

Summary: Recent research has shown an urgent need for high-performance microwave absorbers to tackle electromagnetic pollution. By constructing heterostructure materials through stacking low dimensional materials, superior microwave absorption performance can be achieved.

CARBON (2021)

Add to Collection

Article Chemistry, Physical

Photonic split-second induced mesoporous TiO2-Graphene architectures for efficient sodium-ion batteries

Rohan B. Ambade et al.

Summary: This study demonstrated the fabrication of a rechargeable sodium-ion battery anode material using fast intense pulsed light processing at room temperature, showing excellent performance and providing new possibilities for energy storage applications.

CARBON (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Precisely Designed Mesoscopic Titania for High-Volumetric-Density Pseudocapacitance

Kun Lan et al.

Summary: The mesoscale TiO2 structure with precisely controlled mesoporous frameworks offers high density pseudocapacitance, achieving maximized specific and volumetric capacities as well as commercially comparable areal capacity. This design allows for fast sodiation in dense nanostructures, providing implications for high-power applications and pseudocapacitive electrode design.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Multi-Path Electron Transfer in 1D Double-Shelled Sn@Mo2C/C Tubes with Enhanced Dielectric Loss for Boosting Microwave Absorption Performance

Xiang Qian et al.

Summary: 1D tubular micro-nano structural materials with unique double-shelled Sn@Mo2C/C tubes demonstrate favorable microwave absorption performance through multiple mechanisms, showcasing effective absorption bandwidth and reflection loss capability. The rational design and construction of the hierarchical structure contribute to optimizing the dielectric constant and enhancing the capacity of electromagnetic wave energy dissipation.

SMALL (2021)

Add to Collection

Article Chemistry, Applied

Interwoven scaffolded porous titanium oxide nanocubes/carbon nanotubes framework for high-performance sodium-ion battery

Wen-Bei Yu et al.

Summary: Superconductor-like Na-ion batteries using TiO2 as anode material suffer from low electrical conductivity and slow diffusion of sodium ions. This study combines porous TiO2 nanocubes with carbon nanotubes to enhance conductivity and diffusivity, resulting in improved electrochemical performance. The combination of TiO2 with CNTs significantly increases the utilization efficiency and enhances sodium storage capacity.

JOURNAL OF ENERGY CHEMISTRY (2021)

Add to Collection

Article Polymer Science

Fluorinated nanotubes: synthesis and self-assembly of cyclic peptide-poly(vinylidene fluoride) conjugates

Enrique Folgado et al.

Summary: This study presents the synthesis of cyclic peptide-poly(vinylidene fluoride) (CP-PVDF) conjugates using (d-alt-l)-cyclopeptides as building blocks and their self-assembly into tube-like structures. The conjugates were prepared with high purity through a grafting-from strategy and controlled self-assembly was achieved by addition of THF, resulting in the formation of long tube-like structures. The unprecedented formation of long tubular peptide-polymer aggregates is believed to be due to synergetic effects between the stacking of cyclic peptides and interactions of the fluoropolymer-peptide conjugates.

POLYMER CHEMISTRY (2021)

Add to Collection

Article Chemistry, Physical

Structure-induced partial phase transformation endows hollow TiO2/TiN heterostructure fibers stacked with nanosheet arrays with extraordinary sodium storage performance

Pan Xue et al.

Summary: By utilizing a structure-induced partial phase transformation method, hierarchical hollow TiO2/TiN heterostructure fibers with a high specific surface area were successfully synthesized as an anode material. The interfacial effect of the heterostructures improved charge transfer capability for the anode materials.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Bimetallic Sulfide Sb2S3@FeS2 Hollow Nanorods as High-Performance Anode Materials for Sodium-Ion Batteries

Liang Cao et al.

ACS NANO (2020)

Add to Collection

Review Multidisciplinary Sciences

Hollow structured cathode materials for rechargeable batteries

Xiaobo Zhu et al.

SCIENCE BULLETIN (2020)

Add to Collection

Review Chemistry, Applied

Polysaccharides/Halloysite nanotubes for smart bionanocomposite materials

Vanessa Bertolino et al.

CARBOHYDRATE POLYMERS (2020)

Add to Collection

Article Chemistry, Physical

Deactivated-desulfurizer-derived hollow copper sulfide as anode materials for advanced sodium ion batteries

Lujing Wu et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Fluorine Triggered Surface and Lattice Regulation in Anatase TiO2-xFx Nanocrystals for Ultrafast Pseudocapacitive Sodium Storage

Mingzhu Ni et al.

SMALL (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Hierarchical Microtubes Constructed by MoS2 Nanosheets with Enhanced Sodium Storage Performance

Peiyuan Wang et al.

ACS NANO (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Metal-organic tube or layered assembly: reversible sheet-to-tube transformation and adaptive recognition

Jiayue Tian et al.

CHEMICAL SCIENCE (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Rayleigh-Instability-Induced Bismuth Nanorod@Nitrogen-Doped Carbon Nanotubes as A Long Cycling and High Rate Anode for Sodium-Ion Batteries

Pan Xue et al.

NANO LETTERS (2019)

Add to Collection

Article Multidisciplinary Sciences

Evolution of the electrochemical interface in sodium ion batteries with ether electrolytes

Kaikai Li et al.

NATURE COMMUNICATIONS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Galvanic Replacement Synthesis of Highly Uniform Sb Nanotubes: Reaction Mechanism and Enhanced Sodium Storage Performance

Yan Liu et al.

ACS NANO (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Defect-Assisted Selective Surface Phosphorus Doping to Enhance Rate Capability of Titanium Dioxide for Sodium Ion Batteries

Qingmeng Gan et al.

ACS NANO (2019)

Add to Collection

Article Chemistry, Multidisciplinary

In Situ Observation of Dynamic Galvanic Replacement Reactions in Twinned Metallic Nanowires by Liquid Cell Transmission Electron Microscopy

Chunqiang Zhuang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Add to Collection

Article Chemistry, Physical

Boosting the rate capability of multichannel porous TiO2 nanofibers with well-dispersed Cu nanodots and Cu2+-doping derived oxygen vacancies for sodium-ion batteries

Ying Wu et al.

NANO RESEARCH (2019)

Add to Collection

Review Cell Biology

Lipid transfer proteins: the lipid commute via shuttles, bridges and tubes

Louise H. Wong et al.

NATURE REVIEWS MOLECULAR CELL BIOLOGY (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Crystallization of TiO2 Nanotubes by In Situ Heating TEM

Alberto Casu et al.

NANOMATERIALS (2018)

Add to Collection

Article Chemistry, Physical

beta-SnSb for Sodium Ion Battery Anodes: Phase Transformations Responsible for Enhanced Cycling Stability Revealed by In Situ TEM

Hezhen Xie et al.

ACS ENERGY LETTERS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Shell-Induced Ostwald Ripening: Simultaneous Structure, Composition, and Morphology Transformations during the Creation of Hollow Iron Oxide Nanocapsules

Lei Yu et al.

ACS NANO (2018)

Add to Collection

Review Chemistry, Multidisciplinary

Intricate Hollow Structures: Controlled Synthesis and Applications in Energy Storage and Conversion

Liang Zhou et al.

ADVANCED MATERIALS (2017)

Add to Collection

Review Chemistry, Multidisciplinary

Complex Hollow Nanostructures: Synthesis and Energy-Related Applications

Le Yu et al.

ADVANCED MATERIALS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

An Enantiopure Hydrogen-Bonded Octameric Tube: Self-Sorting and Guest-Induced Rearrangement

Dovile Rackauskaite et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Double-Walled Sb@TiO2-x Nanotubes as a Superior High-Rate and Ultralong-Lifespan Anode Material for Na-Ion and Li-Ion Batteries

Nana Wang et al.

ADVANCED MATERIALS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Fabrication of Hollow Materials by Fast Pyrolysis of Cellulose Composite Fibers with Heterogeneous Structures

Yue Dong et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2016)

Add to Collection

Article Chemistry, Physical

Layer-by-Layer Na3V2(PO4)3 Embedded in Reduced Graphene Oxide as Superior Rate and Ultralong-Life Sodium-Ion Battery Cathode

Yanan Xu et al.

ADVANCED ENERGY MATERIALS (2016)

Add to Collection

Article Multidisciplinary Sciences

Hierarchical MoS2 tubular structures internally wired by carbon nanotubes as a highly stable anode material for lithium-ion batteries

Yu Ming Chen et al.

SCIENCE ADVANCES (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Polyaromatic molecular tubes with a subnanometer pore and the guest-induced emission enhancement behavior

Keita Hagiwara et al.

CHEMICAL COMMUNICATIONS (2015)

Add to Collection

Article Chemistry, Physical

A fractal-like electrode based on double-wall nanotubes of anatase exhibiting improved electrochemical behaviour in both lithium and sodium batteries

Jose R. Gonzalez et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2015)

Add to Collection

Article Chemistry, Physical

Unfolding the Mechanism of Sodium Insertion in Anatase TiO2 Nanoparticles

Liming Wu et al.

ADVANCED ENERGY MATERIALS (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Encapsulating MWNTs into Hollow Porous Carbon Nanotubes: A Tube-in-Tube Carbon Nanostructure for High-Performance Lithium-Sulfur Batteries

Yi Zhao et al.

ADVANCED MATERIALS (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Double-Shelled CoMn2O4 Hollow Microcubes as High-Capacity Anodes for Lithium-Ion Batteries

Liang Zhou et al.

ADVANCED MATERIALS (2012)

Add to Collection

Article Chemistry, Multidisciplinary

Fabrication of Metallic Microtubes Using Self-Rolled Polymer Tubes as Templates

Kamlesh Kumar et al.

LANGMUIR (2009)

Add to Collection

© Peeref 2019-2024. All rights reserved.