☆ 4.6 Article

Enabling structural and interfacial stability of 5 V spinel LiNi0.5Mn1.5O4 cathode by a coherent interface

JOURNAL OF ENERGY CHEMISTRY (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

LiF-doped Li3Al0.3Ti1.7(PO4)3 superionic conductors with enhanced ionic conductivity for all-solid-state lithium-ion batteries

Chang Miao et al.

Summary: Doping LiF into LATP solid electrolyte significantly enhances its performance, with LATP-0.15 showing higher compacted density, ionic conductivity, and lower activation energy compared to pure LATP. The assembled LiCoO2/LATP-0.15/Li coin cell exhibits high discharge specific capacity and excellent capacity retention ratio, indicating the potential of LATP-0.15 solid electrolyte for future all-solid-state lithium-ion batteries.

IONICS (2022)

Add to Collection

Article Multidisciplinary Sciences

Epitaxial growth of an atom-thin layer on a LiNi0.5Mn1.5O4 cathode for stable Li-ion battery cycling

Xiaobo Zhu et al.

Summary: Transition metal dissolution in cathode materials limits the cycle life of Li-ion batteries. This study demonstrates the use of an atomic-thin protecting layer on the surface of a high-voltage cathode material, enabling long-term cycling of Li-ion batteries.

NATURE COMMUNICATIONS (2022)

Add to Collection

Article Chemistry, Physical

Spinel-related Li2Ni0.5Mn1.5O4 cathode for 5-V anode-free lithium metal batteries

Liangdon Lin et al.

Summary: This study proposes using a Li-rich cathode, Li2Ni0.5Mn1.5O4, as a replacement for the LiNi0.5Mn1.5O4 cathode in anode-free lithium metal batteries. The Li-rich cathode can release a large amount of Li ions during the first charge to extend the battery's lifespan without introducing inactive components. Experimental results show that the anode-free battery with a Li-rich cathode maintains high energy density and capacity retention after 50 cycles.

ENERGY STORAGE MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Kinetic Origin of Planar Gliding in Single-Crystalline Ni-Rich Cathodes

Xin-Hai Meng et al.

Summary: This study investigates the origin and evolution of the gliding phenomenon in single-crystalline Ni-rich cathodes and reveals the forms of gliding, including discrete or continuous forms. It is demonstrated that the gliding process is the in-plane migration of transition metal ions, and reducing oxygen vacancies can restrain gliding and microcracking. The designed cathode with less oxygen deficiency exhibits outstanding cycling performance.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2022)

Add to Collection

Article Chemistry, Physical

Structural Stability of Single-Crystalline Ni-Rich Layered Cathode upon Delithiation

Gi-Mun Han et al.

Summary: Single-crystalline NCM cathodes are effective in countering interparticle cracking, but high nickel content SC cathodes may experience internal strain and microscopic cracking during the charging process.

ACS ENERGY LETTERS (2022)

Add to Collection

Review Electrochemistry

Fluorine-Free Electrolytes for Lithium and Sodium Batteries

Guiomar Hernandez et al.

Summary: This review outlines the importance of fluorine in battery electrolytes, the problems it causes, and strategies to eliminate it. The examples provided demonstrate the possibility of creating fully fluorine-free electrolytes with similar performance, but improvements are still needed.

BATTERIES & SUPERCAPS (2022)

Add to Collection

Article Energy & Fuels

Reactive boride infusion stabilizes Ni-rich cathodes for lithium-ion batteries

Moonsu Yoon et al.

Summary: The use of engineered polycrystalline electrodes in lithium-ion batteries is crucial for cycling stability and safety, but achieving high-quality coatings at both the primary and secondary particle levels can be challenging. A coating-and-infusion approach using cobalt boride metallic glass on a Ni-rich layered cathode has been shown to significantly enhance performance, including rate capability and cycling stability under various conditions. The success of this approach is attributed to the simultaneous suppression of microstructural degradation and side reactions, as well as the critical role of strong selective interfacial bonding in ensuring uniform reactive wetting and facilitating infusion.

NATURE ENERGY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Limitations of Ultrathin Al2O3 Coatings on LNMO Cathodes

Elise R. Ostli et al.

Summary: The study demonstrates that even a 1 nm thick Al2O3 coating is detrimental to the cycling performance of LNMO. Complete coverage of LNMO particles by the coating may lead to high overpotentials and reduced reversible capacity. The Al2O3 coating does not provide long-term protection from HF attack, as indicated by severe signs of pitting dissolution in Al2O3-coated LNMO particles.

ACS OMEGA (2021)

Add to Collection

Article Energy & Fuels

High-nickel layered oxide cathodes for lithium-based automotive batteries

Wangda Li et al.

NATURE ENERGY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Enhanced Electrochemical Performance of Ni-Rich Cathode Materials with Li1.3Al0.3Ti1.7(PO4)3 Coating

Xingyu Qu et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)

Add to Collection

Article Chemistry, Physical

High-Temperature Chemical Stability of Li1.4Al0.4Ti1.6(PO4)3 Solid Electrolyte with Various Cathode Materials for Solid-State Batteries

Chan-Yeop Yu et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2020)

Add to Collection

Article Chemistry, Physical

Sulfur doped Li1.3Al0.3Ti1.7(PO4)3solid electrolytes with enhanced ionic conductivity and a reduced activation energy barrier

Abdulkadir Kizilaslan et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Phase Control on Surface for the Stabilization of High Energy Cathode Materials of Lithium Ion Batteries

Jun-Yu Piao et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

Add to Collection

Article Chemistry, Physical

Lattice deformation of LiNia5Mn1.5O4 spinel cathode for Li-ion batteries by ball milling

Takahiro Kozawa

JOURNAL OF POWER SOURCES (2019)

Add to Collection

Article Chemistry, Physical

Improved electrochemical cycling performance of high-voltage spinel LiNi0.5Mn1.5O4 cathode materials by coating with spinel MgAl2O4

Ai-min Wang et al.

SOLID STATE IONICS (2019)

Add to Collection

Article Electrochemistry

Additives for Cycle Life Improvement of High-Voltage LNMO-Based Li-Ion Cells

Andreas Hofmann et al.

CHEMELECTROCHEM (2019)

Add to Collection

Review Chemistry, Physical

Research and development of advanced battery materials in China

Yaxiang Lu et al.

ENERGY STORAGE MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Stabilizing a high-voltage LiNi0.5Mn1.5O4 cathode towards all solid state batteries: a Li-Al-Ti-P-O solid electrolyte nano-shell with a host material

Li Li et al.

NANOSCALE (2019)

Add to Collection

Article Materials Science, Ceramics

LaF3 nanolayer surface modified spinel LiNi0.5Mn1.5O4 cathode material for advanced lithium-ion batteries

Yaping Li et al.

CERAMICS INTERNATIONAL (2018)

Add to Collection

Review Chemistry, Multidisciplinary

Reviving lithium cobalt oxide-based lithium secondary batteries-toward a higher energy density

Longlong Wang et al.

CHEMICAL SOCIETY REVIEWS (2018)

Add to Collection

Article Chemistry, Physical

Li3BO3-Li2CO3: Rationally Designed Buffering Phase for Sulfide All Solid-State Li-Ion Batteries

Sung Hoo Jung et al.

CHEMISTRY OF MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Nanoscale TiO2 membrane coating spinel LiNi0.5Mn1.5O4 cathode material for advanced lithium-ion batteries

Shi Tao et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Add to Collection

Article Chemistry, Applied

NASICON type ordered mesoporous lithium-aluminum-titanium-phosphate as electrode materials for lithium-ion batteries

Piyali Bhanja et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Water-Soluble Sericin Protein Enabling Stable Solid-Electrolyte Interphase for Fast Charging High Voltage Battery Electrode

Yuxin Tang et al.

ADVANCED MATERIALS (2017)

Add to Collection

Review Chemistry, Physical

Surface and Interface Issues in Spinel LiNi0.5Mn1.5O4: Insights into a Potential Cathode Material for High Energy Density Lithium Ion Batteries

Jun Ma et al.

CHEMISTRY OF MATERIALS (2016)

Add to Collection

Article Electrochemistry

High performance LiNi0.5Mn1.5O4 cathode by Al-coating and Al3+-doping through a physical vapor deposition method

Peng Sun et al.

ELECTROCHIMICA ACTA (2016)

Add to Collection

Article Chemistry, Physical

Effect of temperature of Li2O-Al2O3-TiO2-P2O5 solid-state electrolyte coating process on the performance of LiNi0.5Mn1.5O4 cathode materials

Yu-Feng Deng et al.

JOURNAL OF POWER SOURCES (2015)

Add to Collection

Article Chemistry, Physical

Lithium diffusivity in antimony-based intermetallic and FeSb-TiC composite anodes as measured by GITT

Eric Allcorn et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2015)

Add to Collection

Article Chemistry, Physical

Ultrathin Lithium-Ion Conducting Coatings for Increased Interfacial Stability in High Voltage Lithium-Ion Batteries

Joong Sun Park et al.

CHEMISTRY OF MATERIALS (2014)

Add to Collection

Article Chemistry, Multidisciplinary

A perspective on the high-voltage LiMn1.5Ni0.5O4 spinel cathode for lithium-ion batteries

Arumugam Manthiram et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Add to Collection

Article Chemistry, Physical

Ethanol-assisted hydrothermal synthesis of LiNi0.5Mn1.5O4 with excellent long-term cyclability at high rate for lithium-ion batteries

Yuan Xue et al.

JOURNAL OF MATERIALS CHEMISTRY A (2014)

Add to Collection

Review Chemistry, Multidisciplinary

Roles of Surface Chemistry on Safety and Electrochemistry in Lithium Ion Batteries

Kyu Tae Lee et al.

ACCOUNTS OF CHEMICAL RESEARCH (2013)

Add to Collection

Article Chemistry, Physical

Enhanced Li+ ion transport in LiNi0.5Mn1.5O4 through control of site disorder

Jianming Zheng et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2012)

Add to Collection

Article Chemistry, Physical

Effects of protecting layer [Li,La]TiO3 on electrochemical properties of LiMn2O4 for lithium batteries

Kwang Hee Jung et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2011)

Add to Collection

Article Chemistry, Multidisciplinary

An Advanced Lithium Ion Battery Based on High Performance Electrode Materials

Jusef Hassoun et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2011)

Add to Collection

Review Chemistry, Physical

Challenges for Rechargeable Li Batteries

John B. Goodenough et al.

CHEMISTRY OF MATERIALS (2010)

Add to Collection

Article Chemistry, Physical

Improved electrochemical performance of AlPO4-coated LiMn1.5Ni0.5O4 electrode for lithium-ion batteries

Jin Yi Shi et al.

JOURNAL OF POWER SOURCES (2010)

Add to Collection

Article Electrochemistry

Effects of the nanostructured SiO2 coating on the performance of LiNi0.5Mn1.5O4 cathode materials for high-voltage Li-ion batteries

Yukai Fan et al.

ELECTROCHIMICA ACTA (2007)

Add to Collection

Article Electrochemistry

Electrochemical properties of nonstoichiometric LiNi0.5Mn1.5O4-delta thin-film electrodes prepared by pulsed laser deposition

H. Xia et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2007)

Add to Collection

Article Multidisciplinary Sciences

Electrodes with high power and high capacity for rechargeable lithium batteries

KS Kang et al.

SCIENCE (2006)

Add to Collection

Article Electrochemistry

Novel synthesis of layered LiNi1/2Mn1/2O2 as cathode material for lithium rechargeable cells

S Gopukumar et al.

ELECTROCHIMICA ACTA (2004)

Add to Collection

Article Chemistry, Multidisciplinary

Accurate description of van der Waals complexes by density functional theory including empirical corrections

S Grimme

JOURNAL OF COMPUTATIONAL CHEMISTRY (2004)

Add to Collection

Article Electrochemistry

The cathode-electrolyte interface in the Li-ion battery

K Edström et al.

ELECTROCHIMICA ACTA (2004)

Add to Collection

Article Chemistry, Physical

Li ion kinetic studies on spinel cathodes, Li(M1/6Mn11/6)O-4 (M = Mn, Co, CoAl) by GITT and EIS

KM Shaju et al.

JOURNAL OF MATERIALS CHEMISTRY (2003)

Add to Collection

Article Electrochemistry

Surface characterization of electrodes from high power lithium-ion batteries

AM Andersson et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.