☆ 4.6 Article

Constructing a 700 Wh kg-1-level rechargeable lithium-sulfur pouch cell

JOURNAL OF ENERGY CHEMISTRY (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Multidisciplinary

An encapsulating lithium-polysulfide electrolyte for lithium-sulfur batteries

Li-Peng Hou et al.

Summary: This study proposes an encapsulating LiPS electrolyte (EPSE) to suppress parasitic reactions between lithium metal anodes and soluble LiPS based on a nano-heterogeneous solvation structure design. The addition of reduction-stable DIPS in the outer solvent shell significantly inhibits the parasitic reactions between encapsulated LiPS and lithium metal. Experimental results show that a lithium-sulfur battery with EPSE can undergo 103 cycles under demanding conditions.

CHEM (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Toward Practical High-Energy-Density Lithium-Sulfur Pouch Cells: A Review

Zi-Xian Chen et al.

Summary: This review provides a comprehensive overview of the development of high-energy-density Li-S pouch cells over the past 7 years and points out further research directions. The key design parameters for achieving actual high energy density are discussed, followed by an analysis of the progress made and the gap towards practical applications. Failure analysis and promotion strategies at the pouch cell level are also discussed. Lastly, the challenges and opportunities of high-performance Li-S pouch cells are presented.

ADVANCED MATERIALS (2022)

Add to Collection

Article Chemistry, Applied

Evaluation on a 400 Wh kg-1 lithium-sulfur pouch cell

Ge Ye et al.

Summary: This paper systematically evaluates high-energy-density Li-S pouch cells, revealing the working and failure mechanism of Li-S batteries under practical conditions. The study found considerable lithium polysulfides in the electrolyte with high capacity retention in sulfur redox reactions, and identified severe morphology change in lithium metal anode with substantial active lithium supporting subsequent cycles.

JOURNAL OF ENERGY CHEMISTRY (2022)

Add to Collection

Article Chemistry, Physical

Thermal runaway routes of large-format lithium-sulfur pouch cell batteries

Lang Huang et al.

Summary: By investigating the thermal runaway behavior of Li-S pouch cells, this study reveals that the thermal runaway route starts from cathode-induced reactions and then gets accelerated by reactions from the anode. Moreover, solvent vaporization is found to dominate pressure building up during thermal runaway. The in-depth description of the thermal runaway routes will inspire the mitigation of safety issues in next-generation batteries.

JOULE (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Regulating Lithium Salt to Inhibit Surface Gelation on an Electrocatalyst for High-Energy-Density Lithium-Sulfur Batteries

Xi-Yao Li et al.

Summary: This study identified that the commonly used lithium salt LiTFSI aggravates surface gelation on the MoS2 electrocatalyst. By introducing the Lewis basic salt LiI, the gelation is successfully inhibited, leading to a higher energy density in Li-S batteries.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2022)

Add to Collection

Article Chemistry, Physical

Tailoring polysulfide trapping and kinetics by engineering hollow carbon bubble nanoreactors for high-energy Li-S pouch cells

Lei Wang et al.

Summary: A novel carbon foam integrated by hollow carbon bubble nanoreactors with ultrahigh pore volume was designed for high sulfur content and tailored polysulfide trapping and ion/electron transport kinetics. In-situ Raman spectroscopy further enhanced the understanding of electrochemical reaction mechanism for the cathode, leading to high specific capacitances and exceptional practical energy density in Li-S pouch cells.

NANO RESEARCH (2021)

Add to Collection

Article Chemistry, Multidisciplinary

An Organodiselenide Comediator to Facilitate Sulfur Redox Kinetics in Lithium-Sulfur Batteries

Meng Zhao et al.

Summary: This study introduces diphenyl diselenide (DPDSe) as a redox co-mediator to accelerate the sulfur redox kinetics in lithium-sulfur batteries, improving rate performance and cycle stability. The use of DPDSe leads to faster sulfur redox kinetics, increased lithium sulfide deposition, and enhanced overall battery performance, demonstrating potential for high-energy density battery applications.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Semi-Immobilized Molecular Electrocatalysts for High-Performance Lithium-Sulfur Batteries

Chang-Xin Zhao et al.

Summary: This study presents a designed semi-immobilized molecular electrocatalyst to improve the sulfur redox reactions in Li-S batteries, enhancing redox kinetics and regulating phase transition mode. The efficiency of this method is demonstrated in practical Li-S batteries with superior performance, including high rate capability, long lifespan, and high energy density.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

A Robust Ternary Heterostructured Electrocatalyst with Conformal Graphene Chainmail for Expediting Bi-Directional Sulfur Redox in Li-S Batteries

Jingsheng Cai et al.

Summary: The ternary graphene-TiO2/TiN heterostructure is an efficient and robust electrocatalyst for accelerating sulfur redox kinetics, providing abundant anchoring points and sustained active sites for smooth bi-directional electrocatalysis.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Enhanced Electrochemical Kinetics with Highly Dispersed Conductive and Electrocatalytic Mediators for Lithium-Sulfur Batteries

Ji Qian et al.

Summary: A hierarchical Mo2C nanocluster/carbon nanosheets hybrid based hollow spherical material (Mo2C/CHS) is designed and prepared to improve the performance of practical Li-S batteries, showing enhanced electrochemical kinetics and cycling stability. The Li-S batteries with Mo2C/CHS added exhibit high discharge capacity even under lean electrolyte conditions, maintaining high capacity after cycling. This work provides a fundamental understanding of the electrochemical processes and guides the rational design of host and additive materials for practical Li-S batteries.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Low-Density Fluorinated Silane Solvent Enhancing Deep Cycle Lithium-Sulfur Batteries' Lifetime

Tao Liu et al.

Summary: The research introduces a bifunctional fluorinated silane-based electrolyte with a density of 1.0 g mL(-1), which reduces lithium metal loss rate and extends the cycle life of lithium-sulfur batteries. Compared with conventional electrolytes, this electrolyte not only lowers the electrolyte/cell capacity ratio, but also enhances stability under limited lithium amounts.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Ultralight Electrolyte for High-Energy Lithium-Sulfur Pouch Cells

Tao Liu et al.

Summary: The introduction of an ultralight electrolyte with a weakly-coordinating and Li-compatible monoether greatly reduces the weight fraction of electrolyte in Li-S batteries, enabling pouch cell functionality under lean-electrolyte conditions and achieving significant improvements in specific energy. Our ultralight electrolyte could achieve an ultralow electrolyte weight/capacity ratio and realize a substantial increase in specific energy, even exceeding 20% improvement at various E/S ratios.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Article Electrochemistry

Promoting the sulfur redox kinetics by mixed organodiselenides in high-energy-density lithium-sulfur batteries

Meng Zhao et al.

Summary: The study introduces a mixed organodiselenides promoter to enhance the sulfur redox kinetics in lithium-sulfur batteries. This promoter enables high discharge capacity, energy density, and stability under practical working conditions, showcasing the potential for constructing high-energy-density Li-S batteries with improved performance.

ESCIENCE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

An artificial hybrid interphase for an ultrahigh-rate and practical lithium metal anode

Anjun Hu et al.

Summary: An artificial hybrid SEI layer composed of lithium-antimony alloy and lithium fluoride was constructed to reduce electron tunneling between the Li anode and SEI, resulting in uniform Li deposition and stable Li plating/stripping behaviors at an ultrahigh rate. This work uncovers the internal mechanism of Li+ transport within the SEI component, providing a pathway to stabilize the Li anode under practical high-rate conditions.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Add to Collection

Article Engineering, Environmental

A faster lithium ion diffusion pathway constructed by uniform distribution of sulfur using simple one step spray drying method

Zhenpu Shi et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Electrochemistry

S@CNT-graphene-TiN multi-dimensional composites with high sulfur content as the high-performance lithium-sulfur battery cathode materials

Rong Yang et al.

JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Semi-Flooded Sulfur Cathode with Ultralean Absorbed Electrolyte in Li-S Battery

Yong Xie et al.

ADVANCED SCIENCE (2020)

Add to Collection

Article Chemistry, Physical

In-Situ Assembled VS4 as a Polysulfide Mediator for High-Loading Lithium-Sulfur Batteries

Liu Luo et al.

ACS ENERGY LETTERS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Boosting High-Performance in Lithium-Sulfur Batteries via Dilute Electrolyte

Feixiang Wu et al.

NANO LETTERS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Promoted Deposition of Three-Dimensional Li2S on Catalytic Co Phthalocyanine Nanorods for Stable High-Loading Lithium-Sulfur Batteries

Xiao-Xia Yang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Chemistry, Multidisciplinary

A Perspective toward Practical Lithium-Sulfur Batteries

Meng Zhao et al.

ACS CENTRAL SCIENCE (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Molybdenum Boride as an Efficient Catalyst for Polysulfide Redox to Enable High-Energy-Density Lithium-Sulfur Batteries

Jiarui He et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

The Dr Jekyll and Mr Hyde of lithium sulfur batteries

Patrick Bonnick et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Guidelines and trends for next-generation rechargeable lithium and lithium-ion batteries

Feixiang Wu et al.

CHEMICAL SOCIETY REVIEWS (2020)

Add to Collection

Review Energy & Fuels

Pathways for practical high-energy long-cycling lithium metal batteries

Jun Liu et al.

NATURE ENERGY (2019)

Add to Collection

Article Energy & Fuels

Intercalation-conversion hybrid cathodes enabling Li-S full-cell architectures with jointly superior gravimetric and volumetric energy densities

Weijiang Xue et al.

NATURE ENERGY (2019)

Add to Collection

Review Chemistry, Physical

Commercialization of Lithium Battery Technologies for Electric Vehicles

Xiaoqiao Zeng et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Article Chemistry, Applied

Towards full demonstration of high areal loading sulfur cathode in lithium-sulfur batteries

Long Kong et al.

JOURNAL OF ENERGY CHEMISTRY (2019)

Add to Collection

Review Energy & Fuels

How Far Away Are Lithium-Sulfur Batteries From Commercialization?

Kunlei Zhu et al.

FRONTIERS IN ENERGY RESEARCH (2019)

Add to Collection

Article Chemistry, Physical

Lithium phosphorus oxynitride as an efficient protective layer on lithium metal anodes for advanced lithium-sulfur batteries

Weiwen Wang et al.

ENERGY STORAGE MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Polysulfide Electrocatalysis on Framework Porphyrin in High-Capacity and High-Stable Lithium-Sulfur Batteries

Bo-Quan Li et al.

CCS CHEMISTRY (2019)

Add to Collection

Article Multidisciplinary Sciences

A high-energy-density lithium-oxygen battery based on a reversible four-electron conversion to lithium oxide

C. Xia et al.

SCIENCE (2018)

Add to Collection

Review Chemistry, Multidisciplinary

Before Li Ion Batteries

Martin Winter et al.

CHEMICAL REVIEWS (2018)

Add to Collection

Review Engineering, Multidisciplinary

Recent Advances in Energy Chemical Engineering of Next-Generation Lithium Batteries

Xue-Qiang Zhang et al.

ENGINEERING (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Electrically Rechargeable Zinc-Air Batteries: Progress, Challenges, and Perspectives

Jing Fu et al.

ADVANCED MATERIALS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Improving Lithium-Sulfur Battery Performance under Lean Electrolyte through Nanoscale Confinement in Soft Swellable Gels

Junzheng Chen et al.

NANO LETTERS (2017)

Add to Collection

Review Nanoscience & Nanotechnology

Reviving the lithium metal anode for high-energy batteries

Dingchang Lin et al.

NATURE NANOTECHNOLOGY (2017)

Add to Collection

Review Chemistry, Physical

Review on High-Loading and High-Energy Lithium-Sulfur Batteries

Hong-Jie Peng et al.

ADVANCED ENERGY MATERIALS (2017)

Add to Collection

Article Chemistry, Physical

LiNO3-free electrolyte for Li-S battery: A solvent of choice with low Ksp of polysulfide and low dendrite of lithium

Chao Qu et al.

NANO ENERGY (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Toward Practical High-Energy Batteries: A Modular-Assembled Oval-Like Carbon Microstructure for Thick Sulfur Electrodes

Yusheng Ye et al.

ADVANCED MATERIALS (2017)

Add to Collection

Review Chemistry, Physical

A Toolbox for Lithium-Sulfur Battery Research: Methods and Protocols

Ge Zhang et al.

SMALL METHODS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Enhanced Electrochemical Kinetics on Conductive Polar Mediators for Lithium-Sulfur Batteries

Hong-Jie Peng et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Mechanism and Kinetics of Li2S Precipitation in Lithium-Sulfur Batteries

Frank Y. Fan et al.

ADVANCED MATERIALS (2015)

Add to Collection

Article Multidisciplinary Sciences

The synergetic effect of lithium polysulfide and lithium nitrate to prevent lithium dendrite growth

Weiyang Li et al.

NATURE COMMUNICATIONS (2015)

Add to Collection

Article Multidisciplinary Sciences

Lithium Sulfur Primary Battery with Super High Energy Density: Based on the Cauliflower-like Structured C/S Cathode

Yiwen Ma et al.

SCIENTIFIC REPORTS (2015)

Add to Collection

Review Chemistry, Multidisciplinary

Rechargeable Lithium-Sulfur Batteries

Arumugam Manthiram et al.

CHEMICAL REVIEWS (2014)

Add to Collection

Article Chemistry, Physical

V2O5 Polysulfide Anion Barrier for Long-Lived Li-S Batteries

Wen Li et al.

CHEMISTRY OF MATERIALS (2014)

Add to Collection

Article Chemistry, Multidisciplinary

The Li-Ion Rechargeable Battery: A Perspective

John B. Goodenough et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2013)

Add to Collection

Article Chemistry, Physical

A highly ordered nanostructured carbon-sulphur cathode for lithium-sulphur batteries

Xiulei Ji et al.

NATURE MATERIALS (2009)

Add to Collection

Article Multidisciplinary Sciences

Building better batteries

M. Armand et al.

NATURE (2008)

Add to Collection

© Peeref 2019-2024. All rights reserved.