4.5 Article

Lead Telluride Nanowires for Surface Passivation in Cadmium Telluride Photovoltaics

Related references

Note: Only part of the references are listed.
Article Energy & Fuels

Copper iodide nanoparticles as a hole transport layer to CdTe photovoltaics: 5.5 % efficient back-illuminated bifacial CdTe solar cells

Dipendra Pokhrel et al.

Summary: The study investigated the utilization of copper iodide nanoparticles as a hole transport layer in cadmium sulfide/cadmium telluride photovoltaics, achieving significant improvements in device efficiency and fill factor. Solar cells with a CuI/ITO back contact demonstrated photoconversion efficiencies of 11.6% under front illumination and 5.5% under back illumination.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2022)

Article Energy & Fuels

Improving CdSeTe Devices With a Back Buffer Layer of CuxAlOy

Manoj K. Jamarkattel et al.

Summary: The study demonstrates enhanced performance in CdTe devices by incorporating solution-processed CuxAlOy to form a back-buffer layer, resulting in increased efficiency and improved current characteristics. Reduction in carrier recombination can lead to improved performance in photovoltaic devices.

IEEE JOURNAL OF PHOTOVOLTAICS (2022)

Article Energy & Fuels

Understanding the Interplay Between CdSe Thickness and Cu Doping Temperature in CdSe/CdTe Devices

Ebin Bastola et al.

Summary: CdSe thickness and Cu doping are crucial for achieving high efficiency in CdTe solar cells. CdSe thickness plays a significant role in device performance, with a critical thickness determined at 120 nm. Increasing the Cu doping process temperature can lead to an increase in CdSe thickness and overall device efficiency improvement.

IEEE JOURNAL OF PHOTOVOLTAICS (2022)

Article Chemistry, Physical

Evaluation of PbTe and SnTe as ohmic contact layers in CdTe solar cell devices

C. H. Swartz et al.

Summary: For solar cells based on CdTe, we investigated p-type PbTe and SnTe as ohmic contacts. The results showed that the highest doped PbTe resulted in desirable band alignment with CdTe, leading to improved performance of the CdTe solar cells, primarily from increased fill factor.

APPLIED SURFACE SCIENCE (2022)

Review Energy & Fuels

Back contacts materials used in thin film CdTe solar cells-A review

Ralph Stephen Hall et al.

Summary: CdTe is currently the leading commercial thin film photovoltaic technology, but there is much potential for progress towards the Shockley-Queisser limit. Back contact optimization and material choice are critical factors in improving efficiency. Research has explored various back contact materials and processes to identify the most promising groups for further development. Comparisons are drawn with back contact materials used in other thin film photovoltaics like perovskites and kesterites.

ENERGY SCIENCE & ENGINEERING (2021)

Article Chemistry, Physical

Enabling bifacial thin film devices by developing a back surface field using CuxAlOy

Kamala Khanal Subedi et al.

Summary: Bifacial solar cells have the potential to increase energy yield and reduce costs, but thin film bifacial solar cells lag behind crystalline silicon cells. Introducing CuxAlOy as a back buffer layer can improve efficiency.

NANO ENERGY (2021)

Proceedings Paper Energy & Fuels

Solution Processed Lead Telluride Nanowires as a Passivating Layer to CdTe Photovoltaics

Dipendra Pokhrel et al.

Summary: Lead telluride nanowires were used as a passivating layer on cadmium telluride solar cells, enhancing device performance by reducing back surface recombination. The improved open-circuit voltage and fill factor in devices fabricated with these nanowires confirm the desired effects of surface passivation.

2021 IEEE 48TH PHOTOVOLTAIC SPECIALISTS CONFERENCE (PVSC) (2021)

Article Energy & Fuels

Solar cell efficiency tables (Version 55)

Martin A. Green et al.

PROGRESS IN PHOTOVOLTAICS (2020)

Article Chemistry, Physical

Maximize CdTe solar cell performance through copper activation engineering

Deng-Bing Li et al.

NANO ENERGY (2020)

Article Materials Science, Multidisciplinary

Aspect ratio controlled synthesis of tellurium nanowires for photovoltaic applications

Dipendra Pokhrel et al.

MATERIALS ADVANCES (2020)

Proceedings Paper Energy & Fuels

Doping of CdTe using CuCl2 Solution for Highly Efficient Photovoltaic Devices

Ebin Bastola et al.

2019 IEEE 46TH PHOTOVOLTAIC SPECIALISTS CONFERENCE (PVSC) (2019)

Article Chemistry, Physical

The Role of Back Buffer Layers and Absorber Properties for >25% Efficient CdTe Solar Cells

Geethika K. Liyanage et al.

ACS APPLIED ENERGY MATERIALS (2019)

Article Energy & Fuels

Interfaces Between CdTe and ALD Al2O3

Craig L. Perkins et al.

IEEE JOURNAL OF PHOTOVOLTAICS (2018)

Article Chemistry, Physical

Interface Engineering for 25% CdTe Solar Cells

Tursun Ablekim et al.

ACS APPLIED ENERGY MATERIALS (2018)

Article Energy & Fuels

Co-sublimation of CdSexTe1-x layers for CdTe solar cells

Drew E. Swanson et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2017)

Article Chemistry, Multidisciplinary

Environmentally Benign Synthesis of Ultrathin Metal Telluride Nanowires

Haoran Yang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)

Article Physics, Applied

A comprehensive picture of Cu doping in CdTe solar cells

J. Perrenoud et al.

JOURNAL OF APPLIED PHYSICS (2013)

Review Materials Science, Coatings & Films

Status and prospects of Al2O3-based surface passivation schemes for silicon solar cells

Gijs Dingemans et al.

JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A (2012)

Article Physics, Multidisciplinary

Twisted ZB-CdTe/RS-PbTe (111) heterojunction as a metastable interface structure

Shuqiang Jin et al.

NEW JOURNAL OF PHYSICS (2012)

Article Chemistry, Multidisciplinary

Unit Cell Structure of Crystal Polytypes in InAs and InSb Nanowires

Dominik Kriegner et al.

NANO LETTERS (2011)

Article Materials Science, Multidisciplinary

Cu-related recombination in CdS/CdTe solar cells

S. H. Demtsu et al.

THIN SOLID FILMS (2008)

Article Physics, Applied

Centrosymmetric PbTe/CdTe quantum dots coherently embedded by epitaxial precipitation

W. Heiss et al.

APPLIED PHYSICS LETTERS (2006)

Article Physics, Applied

Electrical and optical properties of PbTe p-n junction infrared sensors -: art. no. 024904

AS Barros et al.

JOURNAL OF APPLIED PHYSICS (2006)