☆ 4.6 Article

Efficient Utilization of Macropores as Artificial Solid-Electrolyte Interphase Channels for High-Capacity Silicon/Graphite Anode Materials

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Applied

The optimization of porosity and particle size for micron-size porous silicon in high energy pre-lithiated silicon-graphite composite for Li-ion batteries

Yiteng Luo et al.

Summary: To improve the performance of Li-ion batteries, researchers synthesized a p-Si/G@C composite, in which porous silicon was coated on graphite and encapsulated in carbon. It was found that porous silicon with higher porosity and smaller particle size displayed better cycle stability and rate performance in the electrode. With optimized design, the p-Si/G@C composite exhibited excellent cycle stability and high capacity retention.

MICROPOROUS AND MESOPOROUS MATERIALS (2022)

Add to Collection

Article Multidisciplinary Sciences

Interfacial reactions in lithia-based cathodes depending on the binder in the electrode and salt in the electrolyte

Hee Jeong Im et al.

Summary: Lithia-based cathodes exhibit higher capacity than commercial cathodes, but suffer from side reactions that limit their commercialization. This study replaces the binder and salt in the electrolyte to reduce these side reactions, resulting in increased available capacity and cyclic performance.

SCIENTIFIC REPORTS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

The Pitfalls and Opportunities of Impedance Spectroscopy of Lithium Sulfur Batteries

Sara Drvaric Talian et al.

Summary: The article summarizes the application of electrochemical impedance spectroscopy in studying lithium-sulfur batteries, highlighting potential pitfalls related to measurement parameters, impedance response interpretation, and spectra fitting. It critically evaluates available information on Li-S battery impedance response and discusses the methodology of impedance spectra fitting.

ADVANCED MATERIALS INTERFACES (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Investigation of SiOx anode fading mechanism with limited capacity cycling

Haiqing Xiao et al.

Summary: Silicon suboxide (SiOx) is a promising anode material for lithium-ion batteries, but it suffers from severe capacity fading during cycling. This study investigates the fading mechanisms of SiOx anode materials, revealing the role of surface instability.

APL MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Expandable crosslinked polymer coatings on silicon nanoparticle anode toward high-rate and long-cycle-life lithium-ion battery

Gwanghyun Lee et al.

Summary: The use of ultra-thin polyacrylonitrile layer as a coating has been demonstrated to effectively mitigate the volume expansion of silicon nanoparticles anode in Li-ion batteries, leading to improved cycling stability and capacity retention.

APPLIED SURFACE SCIENCE (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Origin of Lithiophilicity of Lithium Garnets: Compositing or Cleaning?

Hongpeng Zheng et al.

Summary: This research demonstrated the lithiophobicity of garnet-type solid-state electrolyte LLZTO and revealed its close relationship with the surface compositions of lithium and LLZTO. By employing a simple and effective polishing-and-spreading strategy, the wettability between lithium metal and LLZTO can be improved, leading to stable Li/LLZTO interfaces.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Electrochemistry

Vulcanized polyisoprene-graft-maleic anhydride as an efficient binder for silicon anodes in lithium-ion batteries

Satish Bolloju et al.

Summary: This study investigates the use of vulcanized polyisoprene-graft-maleic anhydride (VPI-g-MA) as an in situ cross-linked binder for silicon (Si) anodes. The VPI-g-MA binder was found to significantly enhance the cycle-life performance of the Si anodes, exhibiting high initial charge capacity and improved adhesion strength compared to other binders. Scanning electron microscopy images confirmed the ability of the VPI-g-MA binder to maintain the integrity of the Si electrode throughout the cycling process.

ELECTROCHIMICA ACTA (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Enabling Long-Cycling Life of Si-on-Graphite Composite Anodes via Fabrication of a Multifunctional Polymeric Artificial Protective

Mozaffar Abdollahifar et al.

Summary: In this study, a multifunctional polymeric artificial solid-electrolyte interphase (A-SEI) protective layer was developed on carbon-coated Si@Gr anode particles to solve the long cycling stability challenge of Si@Gr composites. The coating made of sulfonated chitosan (SCS) was found to enhance ionic conduction and mechanical strength, leading to a superior long cycle life performance of the anodes.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection

Article Chemistry, Physical

Effects of carbon coating on calendered nano-silicon graphite composite anodes of LiB

Jannes Mueller et al.

Summary: This study scaled up the production process of silicon/graphite composites and investigated the effects of carbon coating and calendering on the particle level. The study found that carbon coating reduces surface area, stabilizes the composite, and enhances electrical conductivity. The electrochemical performance of the composites showed improved capacity retention with carbon coating, especially after calendering.

JOURNAL OF POWER SOURCES (2022)

Add to Collection

Review Energy & Fuels

Insights into Enhancing Electrochemical Performance of Li-Ion Battery Anodes via Polymer Coating

Mozaffar Abdollahifar et al.

Summary: This article reviews the attempts to use polymer coatings on the anode active materials to enhance the performance of lithium-ion batteries. The prominent examples of anodes with different mechanisms are discussed, and the future developments in this field are provided.

ENERGIES (2022)

Add to Collection

Article Engineering, Environmental

Si-on-Graphite fabricated by fluidized bed process for high-capacity anodes of Li-ion batteries

Jannes Mueller et al.

Summary: The study reports the fabrication of silicon-on-graphite composites using fluidized bed granulation for the first time, showing the formation of core-shell microstructure. By using a suitable binder during the process, the carbon-coated composites exhibit high capacity, high rate capability, and long cycle stability.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Electrochemistry

Lithium polyacrylate polymer coating enhances the performance of graphite/silicon/carbon composite anodes

Thi BeTa Truong et al.

Summary: In this study, LiPAA-coated Gr/Si/C composite materials were prepared and showed improved capacity retentions during cycling tests. The LiPAA polymer coating stabilized the interface structure between the electrode and the electrolyte during the cycling process.

ELECTROCHIMICA ACTA (2021)

Add to Collection

Article Electrochemistry

Modelling capacity fade in silicon-graphite composite electrodes for lithium-ion batteries

Shweta Dhillon et al.

Summary: Numerical simulations were used to study the electrochemical and morphological behavior of silicon-based composite electrodes during galvanostatic cycling. The study revealed that changes in electrode porosity and growth of solid electrolyte interphase layer play a crucial role in influencing electrode performance.

ELECTROCHIMICA ACTA (2021)

Add to Collection

Article Chemistry, Physical

Regulating lithium deposition via bifunctional regular-random cross-linking network solid polymer electrolyte for Li metal batteries

Fang Fu et al.

Summary: A bifunctional regular-random dual cross-linking network solid polymer electrolyte (RRa-SPE) is proposed for dendrite-free all-solid-state lithium metal batteries, effectively regulating lithium deposition and facilitating the generation of a highly homogeneous and robust solid-electrolyte interphase (SEI) layer. The RRa-SPE exhibits good ionic conductivity, high lithium ion transference number, and enhanced mechanical strength, leading to low voltage polarization and excellent cycle performance in LiFePO4/RRa-SPE/Li cells.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Article Multidisciplinary Sciences

Replacing conventional battery electrolyte additives with dioxolone derivatives for high-energy-density lithium-ion batteries

Sewon Park et al.

Summary: The study introduces a new method using electrolyte additives to form a stable electrode-electrolyte interface architecture with spatial flexibility, which enhances the performance and stability of lithium-ion batteries, allowing for fast charging capabilities.

NATURE COMMUNICATIONS (2021)

Add to Collection

Article Electrochemistry

Novel design of uniform Si@graphite@C composite as high-performance Li-ion battery anodes

Sijia Zhu et al.

Summary: A novel Si@graphite@C composite was designed through the pretreatment of graphite, subsequent deposition of Si nanoparticles via chemical vapor deposition, and finally the coating of carbon layer. The composite shows good electrical conductivity and can accommodate volume changes during charge/discharge processes, resulting in good electrochemical performance. The study also investigates the relationship between pore size distribution, Si particle distribution, and electrode performance.

ELECTROCHIMICA ACTA (2021)

Add to Collection

Article Electrochemistry

Improved Low Temperature Performance of Graphite/Li Cells Using Isoxazole as a Novel Cosolvent in Electrolytes

Nuwanthi D. Rodrigo et al.

Summary: Investigation on novel electrolyte formulations using isoxazole as a co-solvent in Li/graphite half cells shows significant improvement in low temperature performance. The addition of FEC enhances the stability of the anode SEI, preventing further decomposition of the isoxazole solvent and improving cycling performance.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Facile synthesis of core-shell structured Si@graphene balls as a high-performance anode for lithium-ion batteries

Anif Jamaluddin et al.

NANOSCALE (2020)

Add to Collection

Article Multidisciplinary Sciences

Towards maximized volumetric capacity via pore-coordinated design for large-volume-change lithium-ion battery anodes

Jiyoung Ma et al.

NATURE COMMUNICATIONS (2019)

Add to Collection

Article Chemistry, Physical

Robust Pitch on Silicon Nanolayer-Embedded Graphite for Suppressing Undesirable Volume Expansion

Seong-Hyeon Choi et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Interfacially Induced Cascading Failure in Graphite-Silicon Composite Anodes

Seoung-Bum Son et al.

ADVANCED SCIENCE (2019)

Add to Collection

Article Multidisciplinary Sciences

An ultrathin ionomer interphase for high efficiency lithium anode in carbonate based electrolyte

Yu-Ting Weng et al.

NATURE COMMUNICATIONS (2019)

Add to Collection

Article Chemistry, Physical

High Polarity Poly(vinylidene difluoride) Thin Coating for Dendrite-Free and High-Performance Lithium Metal Anodes

Jing Luo et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

A novel approach to synthesize micrometer-sized porous silicon as a high performance anode for lithium-ion batteries

Haiping Jia et al.

NANO ENERGY (2018)

Add to Collection

Review Energy & Fuels

Performance and cost of materials for lithium-based rechargeable automotive batteries

Richard Schmuch et al.

NATURE ENERGY (2018)

Add to Collection

Review Chemistry, Physical

Review on modeling of the anode solid electrolyte interphase (SEI) for lithium-ion batteries

Aiping Wang et al.

NPJ COMPUTATIONAL MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Nanoparticle Synthesis via Electrostatic Adsorption Using Incipient Wetness Impregnation

Sonia Eskandari et al.

ACS CATALYSIS (2018)

Add to Collection

Article Multidisciplinary Sciences

Silicon Surface Tethered Polymer as Artificial Solid Electrolyte Interface

Brian H. Shen et al.

SCIENTIFIC REPORTS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Self-Templating Construction of 3D Hierarchical Macro-/Mesoporous Silicon from OD Silica Nanoparticles

Xiuxia Zuo et al.

ACS NANO (2017)

Add to Collection

Article Electrochemistry

The Development and Future of Lithium Ion Batteries

George E. Blomgren

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)

Add to Collection

Review Electrochemistry

Lithium ion, lithium metal, and alternative rechargeable battery technologies: the odyssey for high energy density

Tobias Placke et al.

JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2017)

Add to Collection

Article Engineering, Chemical

Poly-dopamine coated graphite oxide/silicon composite as anode of lithium ion batteries

Jing Wu et al.

POWDER TECHNOLOGY (2017)

Add to Collection

Article Chemistry, Multidisciplinary

A dimensionally stable and fast-discharging graphite-silicon composite Li-ion battery anode enabled by electrostatically self-assembled multifunctional polymer-blend coating

Fu-Sheng Li et al.

CHEMICAL COMMUNICATIONS (2015)

Add to Collection

Review Chemistry, Multidisciplinary

Recent Developments in the Synthesis of Supported Catalysts

Peter Munnik et al.

CHEMICAL REVIEWS (2015)

Add to Collection

Article Chemistry, Physical

Synthesis and viscoelastic characterization of sulfonated chitosan solutions

Syang-Peng Rwei et al.

COLLOID AND POLYMER SCIENCE (2014)

Add to Collection

Article Electrochemistry

Compositional Change of Surface Film Deposited on LiNi0.5Mn1.5O4 Positive Electrode

Taeho Yoon et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2014)

Add to Collection

Article Chemistry, Physical

Interface layer formation in solid polymer electrolyte lithium batteries: an XPS study

Chao Xu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2014)

Add to Collection

Article Electrochemistry

Study of the Cathode-Electrolyte Interface of LiMn1.5Ni0.5O4 Synthesized by a Sol-Gel Method for Li-Ion Batteries

Hugues Duncan et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2010)

Add to Collection

Article Pharmacology & Pharmacy

The Sorption of Ketotifen Fumarate by Chitosan

Khouloud A. Alkhamis et al.

AAPS PHARMSCITECH (2008)

Add to Collection

Article Electrochemistry

Alloy design for lithium-ion battery anodes

M. N. Obrovac et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2007)

Add to Collection

Article Physics, Applied

Energy structures and chemical reactions at the Al/LiF/Alq3 interfaces studied by synchrotron-radiation photoemission spectroscopy -: art. no. 212108

CI Wu et al.

APPLIED PHYSICS LETTERS (2005)

Add to Collection

Article Physics, Applied

Role of active species in surface cleaning by an Ar-N2 atmospheric pressure post-discharge

T Belmonte et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.