☆ 4.7 Article

An Experimental Investigation into Mechanical and Thermal Properties of Hybrid Woven Rattan/Glass-Fiber-Reinforced Epoxy Composites

POLYMERS (2022)

Related references

Note: Only part of the references are listed.

Article Materials Science, Textiles

Investigation of the impact and post-impact behaviour of glass and glass/natural fibre hybrid composites made with various stacking sequences: Experimental and theoretical analysis

Erdem Selver et al.

Summary: In this study, the impact and post-impact response of thermoset composite laminates made from different fabrics were investigated. The results showed that glass composites had higher impact resistance and hybrids with glass fabric layers on the exterior had better impact resistance. Natural and hybrid composites absorbed more energy between 20 and 40 J. Glass composites exhibited higher compression and compression after impact strength, while hybrid composites had higher compression after impact strength retention due to less fiber damages. Numerical analysis showed good agreement with experimental results.

JOURNAL OF INDUSTRIAL TEXTILES (2022)

Add to Collection

Article Materials Science, Textiles

Fabrication of Automobile Component Using Hybrid Natural Fiber Reinforced Polymer Composite

Rajkumar Ramasubbu et al.

Summary: In recent years, natural fibers have been increasingly used for their lower weight to strength ratio, low cost, and environmental-friendly attributes. In this study, a hybrid composite (HC) was manufactured using sisal/kenaf fiber reinforced with epoxy matrix, and its mechanical properties were compared with sisal fiber composite (SFC) and kenaf fiber composite (KFC). The results showed that HC exhibited better properties, making it suitable for lightweight automobile applications.

JOURNAL OF NATURAL FIBERS (2022)

Add to Collection

Article Forestry

Mechanical properties of bamboo fiber bundle-reinforced bamboo powder composite materials

Shinji Ochi

Summary: This paper investigates the mechanical properties of bamboo fiber bundle-reinforced bamboo powder composite materials. The water content of the bamboo powder and the molding temperature were studied to determine their effects on the strength characteristics. The results show that a molding temperature of 180 degrees C is the most suitable for fiber bundle reinforcement, with the highest tensile and flexural strengths achieved at a fiber bundle content of 70%.

EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Effect of Stacking Sequences, Fabric Orientations, and Chemical Treatment on the Mechanical Properties of Hybrid Woven Jute-Ramie Composites

C. Tezara et al.

Summary: The research analyzed the effect of stacking sequences, fibre orientations, and alkali treatment on the mechanical properties of hybrid jute and ramie reinforced vinyl ester composites. It was found that composites with 0 degrees fibre orientation showed significantly higher tensile and flexural strength, and combining fibre orientation with lower alkali treatment concentration can improve the mechanical properties of the composites.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2022)

Add to Collection

Article Chemistry, Physical

Performance Evaluation of Jute/Glass-Fiber-Reinforced Polybutylene Succinate (PBS) Hybrid Composites with Different Layering Configurations

Muhammad Usman Ghani et al.

Summary: The effect of stacking sequence on the performance of glass-jute hybrid composites was studied. Composites with glass fiber layers on their outer surfaces showed the best mechanical, thermal, and water resistance properties.

MATERIALS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of stacking sequence and fiber content on mechanical and morphological properties of woven kenaf/polyester fiber reinforced polylactic acid (PLA) hybrid laminated composites

M. N. M. Azlin et al.

Summary: Hybrid laminated composites consisting of woven kenaf, woven polyester, and polylactic acid (PLA) were fabricated using the hot compression method. The composition and stacking sequence of the hybrid composites significantly influenced their mechanical properties. Increasing the content of woven kenaf improved the flexural properties of the hybrid composites, while the composition of woven kenaf and woven polyester had an effect on flexural strength. Additionally, the tensile fracture surface morphology was evaluated using field emission scanning electron microscopy (FESEM), providing insights for industrial applications.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

Add to Collection

Article Polymer Science

Modification of Ramie Fiber via Impregnation with Low Viscosity Bio-Polyurethane Resins Derived from Lignin

Muhammad Adly Rahandi Lubis et al.

Summary: The aim of this study was to enhance the thermal and mechanical properties of ramie fiber through impregnation with low-viscosity lignin-based polyurethane (LPU) resins. The LPU resins were synthesized by dissolving lignin in 20% NaOH and adding polymeric 4,4-methane diphenyl diisocyanate (pMDI) with a mole ratio of 0.3 NCO/OH. Impregnation of ramie fiber with LPU resins led to the formation of urethane bonds, increasing thermal stability by an average of 6% and mechanical properties by an average of 100% compared to untreated fiber. The best results were obtained with LPU-ethyl acetate, with a residual weight of 22% and tensile strength of 648.7 MPa after 30 minutes of impregnation.

POLYMERS (2022)

Add to Collection

Article Polymer Science

The Influence of Filler Loading and Alkaline Treatment on the Mechanical Properties of Palm Kernel Cake Filler Reinforced Epoxy Composites

Tezara Cionita et al.

Summary: This study aims to explore the application of palm kernel cake filler in reinforced epoxy composites. The effects of filler loading and alkaline treatment on the mechanical properties of the composites were investigated. The results showed that palm kernel cake is a promising material for use as a filler in polymer composites.

POLYMERS (2022)

Add to Collection

Article Polymer Science

Thermal Stability, Dynamic Mechanical Analysis and Flammability Properties of Woven Kenaf/Polyester-Reinforced Polylactic Acid Hybrid Laminated Composites

M. N. M. Azlin et al.

Summary: This paper investigates the thermal and flammability properties of woven kenaf/polyester-reinforced polylactic acid hybrid laminated composites. Through thermal analysis and flammability testing, the study confirms the impact of hybridization on the thermal stability, viscoelastic properties, and burning rate of the laminates.

POLYMERS (2022)

Add to Collection

Article Engineering, Chemical

Experimental Investigation on Mechanical Properties of Glass Fiber Hybridized Natural Fiber Reinforced Penta-Layered Hybrid Polymer Composite

Manjunathan Karthick et al.

Summary: This article investigates the impact of fiber composition, sequence, and stacking pattern on the mechanical features of hybrid composites. It is found that increasing the number of bamboo fiber layers can improve the strain and toughness of the materials.

INTERNATIONAL JOURNAL OF CHEMICAL ENGINEERING (2022)

Add to Collection

Article Engineering, Chemical

Experimental Investigation on Mechanical Properties of Glass Fiber Hybridized Natural Fiber Reinforced Penta-Layered Hybrid Polymer Composite

Manjunathan Karthick et al.

Summary: This study examines the impact of fiber composition, sequence, and stacking pattern on the mechanical properties of hybrid composites. It found that samples with a higher number of bamboo fiber layers exhibited increased strain and toughness, while the glass fiber as the main and covering layer had a greater impact on the mechanical properties of the composites.

INTERNATIONAL JOURNAL OF CHEMICAL ENGINEERING (2022)

Add to Collection

Review Polymer Science

A Comprehensive Review on Advanced Sustainable Woven Natural Fibre Polymer Composites

H. A. Aisyah et al.

Summary: The progressive application of natural fibres in polymer composites has alleviated environmental impacts. There is a growing interest in developing green materials using woven natural fibres for various applications. Woven materials have better mechanical properties and can be tailored to specific needs, making them promising materials for natural fibre polymer composites.

POLYMERS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Thermal analysis of Kevlar/basalt reinforced hybrid polymer composite

V Ramesh et al.

Summary: This study investigates the thermal properties of hybrid composites with different combinations of reinforcement fibers, and reveals that basalt fibers have a significant influence on thermal properties. Composites with a mix of Kevlar and basalt fibers show variations in thermal conductance and linear thermal expansion coefficient, with the composition of layers impacting the overall performance. The laminate with basalt as the core and Kevlar as the outer layer exhibited the highest decomposition weight loss and peak decomposition rate compared to other compositions.

MATERIALS RESEARCH EXPRESS (2021)

Add to Collection

Review Polymer Science

Delamination and Manufacturing Defects in Natural Fiber-Reinforced Hybrid Composite: A Review

M. J. Suriani et al.

Summary: Most boat fabrication companies now use 100% synthetic fiber-reinforced composite materials, but recent research shows a shift towards more cost-effective natural fibers. Hybridization is recommended as a solution to natural fiber's weaknesses and to reduce the use of environmentally unfriendly synthetic fibers.

POLYMERS (2021)

Add to Collection

Review Polymer Science

A Review on Mechanical Performance of Hybrid Natural Fiber Polymer Composites for Structural Applications

N. M. Nurazzi et al.

Summary: Hybrid natural fiber polymer composites have been the focus of recent research and innovation in the field of structural applications, aiming to improve mechanical properties by combining different materials, including natural fibers, synthetic fibers, and carbonaceous materials. These composite materials are manufactured from a variety of materials, such as rubber, elastomer, metal, ceramics, glasses, and plants, and have diverse shapes and applications in aerospace interiors, naval, civil building, industrial, and sporting goods sectors.

POLYMERS (2021)

Add to Collection

Article Polymer Science

The Effect of Hybridisation on Mechanical Properties and Water Absorption Behaviour of Woven Jute/Ramie Reinforced Epoxy Composites

Cionita Tezara et al.

Summary: This study investigates the mechanical properties of epoxy composites reinforced by jute-ramie hybridisation, finding that the hybrid composite outperforms pure jute composites. However, exposure to aqueous environments leads to a reduction in mechanical properties, although they remain higher than those of pure epoxy resin. The appropriate stacking sequence and material selection significantly impact mechanical properties and water absorption behavior of the composites.

POLYMERS (2021)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Tensile attributes and material analysis of kevlar and date palm fibers reinforced epoxy composites for automotive bumper applications

R. Muthalagu et al.

Summary: Bumper beam is a crucial component in the automotive industry for passenger safety, and in this study, Kevlar and date palm fibers were used to enhance its mechanical properties. Through tensile testing and finite element analysis, the composite material showed promising results, validating its potential advantages in real-world applications.

MATERIALS TODAY-PROCEEDINGS (2021)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Experimental investigation on the mechanical properties of woven hybrid fiber reinforced epoxy composite

V Santhanam et al.

Summary: The study developed a hybrid fiber reinforced composite and investigated the effects of hybridization, stacking sequence, and surface treatment on mechanical properties. It was found that the stacking arrangement of woven glass fiber and banana fiber had a significant impact on flexural and impact strength.

MATERIALS TODAY-PROCEEDINGS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Reinforcing Microwave Absorption Multiwalled Carbon Nanotube-Epoxy Composites Using Glass Fibers for Multifunctional Applications

Kuo Li et al.

ADVANCED ENGINEERING MATERIALS (2020)

Add to Collection

Article Materials Science, Composites

Synthesis of developed rice straw sheets and glass fiber-reinforced polyester composites

M. Megahed et al.

JOURNAL OF COMPOSITE MATERIALS (2020)

Add to Collection

Article Forestry

Tensile Properties of Natural and Synthetic Rattan Strips Used as Furniture Woven Materials

Yanting Gu et al.

FORESTS (2020)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Mechanical properties of hybrid glass fiber/rice husk reinforced polymer composite

Mawarnie Ismail et al.

MATERIALS TODAY-PROCEEDINGS (2020)

Add to Collection

Review Automation & Control Systems

Mechanical evaluation of hybrid natural fibre-reinforced polymeric composites for automotive bumper beam: a review

O. T. Adesina et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

Add to Collection

Article Materials Science, Textiles

Mechanical behavior of woven natural fiber fabric composites: Effect of weaving architecture, intra-ply hybridization and stacking sequence of fabrics

M. Rajesh et al.

JOURNAL OF INDUSTRIAL TEXTILES (2018)

Add to Collection

Review Materials Science, Composites

Review of natural fibre-reinforced hybrid composites

Chensong Dong

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2018)

Add to Collection

Article Mechanics

Thermal properties of sugar palm/glass fiber reinforced thermoplastic polyurethane hybrid composites

A. Atiqah et al.

COMPOSITE STRUCTURES (2018)

Add to Collection

Review Engineering, Multidisciplinary

Impact behaviour of hybrid composites for structural applications: A review

Syafiqah Nur Azrie Safri et al.

COMPOSITES PART B-ENGINEERING (2018)

Add to Collection

Article Engineering, Multidisciplinary

Mechanical Properties of Natural Fiber Braided Yarn Woven Composite: Comparison with Conventional Yarn Woven Composite

Murugan Rajesh et al.

JOURNAL OF BIONIC ENGINEERING (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Thermogravimetric characterization of polyester matrix composites reinforced with eucalyptus fibers

Marcos Vinicius Fonseca Ferreira et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2017)

Add to Collection

Article Materials Science, Paper & Wood

Partial Replacement of Glass Fiber by Woven Kenaf in Hybrid Composites and its Effect on Monotonic and Fatigue Properties

Mohaiman Jaffar Sharba et al.

BioResources (2016)

Add to Collection

Article Mechanics

Thermal behaviour and dynamic mechanical analysis of Pennisetum purpureum/glass-reinforced epoxy hybrid composites

M. J. M. Ridzuan et al.

COMPOSITE STRUCTURES (2016)

Add to Collection

Article Thermodynamics

Wood biomass characterization by DSC or FT-IR spectroscopy

Andrzej Brys et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Layering pattern effects on vibrational behavior of coconut sheath/banana fiber hybrid composites

K. Senthil Kumar et al.

MATERIALS & DESIGN (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Analyses of woven hemp fabric characteristics for composite reinforcement

M. I. Misnon et al.

MATERIALS & DESIGN (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of layering sequence and chemical treatment on the mechanical properties of woven kenaf-aramid hybrid laminated composites

R. Yahaya et al.

MATERIALS & DESIGN (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Mechanical properties of banana/kenaf fiber-reinforced hybrid polyester composites: Effect of woven fabric and random orientation

A. Alavudeen et al.

MATERIALS & DESIGN (2015)

Add to Collection

Article Materials Science, Biomaterials

Analysis of the Mechanical and thermal properties of jute and glass fiber as reinforcement epoxy hybrid composites

R. A. Braga et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2015)

Add to Collection

Article Polymer Science

Characterization on the Properties of Jute Fiber at Different Portions

Sweety Shahinur et al.

INTERNATIONAL JOURNAL OF POLYMER SCIENCE (2015)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Study on Mechanical Properties of Natural - Glass Fibre Reinforced Polymer Hybrid Composites: A Review

M. R. Sanjay et al.

MATERIALS TODAY-PROCEEDINGS (2015)

Add to Collection

Article Engineering, Multidisciplinary

Development of kenaf-glass reinforced unsaturated polyester hybrid composite for structural applications

A. Atiqah et al.

COMPOSITES PART B-ENGINEERING (2014)

Add to Collection

Article Materials Science, Composites

Mechanical properties of woven jute-glass hybrid-reinforced epoxy composite

Raghavendra Gujjala et al.

JOURNAL OF COMPOSITE MATERIALS (2014)

Add to Collection

Proceedings Paper Engineering, Multidisciplinary

Fabrication and Property Evaluation of Banana-Hemp-Glass Fiber Reinforced Composites

R. Bhoopathi et al.

12TH GLOBAL CONGRESS ON MANUFACTURING AND MANAGEMENT (GCMM - 2014) (2014)

Add to Collection

Article Materials Science, Composites

Tensile and interfacial properties of unidirectional flax/glass fiber reinforced hybrid composites

Yongli Zhang et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2013)

Add to Collection

Article Polymer Science

Mechanical and Thermo-Physical Properties of Fish Tail Palm Tree Natural Fiber-Reinforced Polyester Composites

K. Ramanaiah et al.

INTERNATIONAL JOURNAL OF POLYMER ANALYSIS AND CHARACTERIZATION (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Evaluation of mechanical properties of abaca-jute-glass fibre reinforced epoxy composite

B. Vijaya Ramnath et al.

MATERIALS & DESIGN (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Design of an impact resistant glass fibre/epoxy composites using short silk fibres

Mei-po Ho et al.

MATERIALS & DESIGN (2012)

Add to Collection

Article Materials Science, Multidisciplinary

Date palm wood flour/glass fibre reinforced hybrid composites of recycled polypropylene: Mechanical and thermal properties

Mariam A. AlMaadeed et al.

MATERIALS & DESIGN (2012)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of glass hybridization and staking sequence on mechanical behaviour of interply coir-glass hybrid laminate

S. Jayabal et al.

BULLETIN OF MATERIALS SCIENCE (2011)

Add to Collection

Review Chemistry, Applied

Cellulosic/synthetic fibre reinforced polymer hybrid composites: A review

M. Jawaid et al.

CARBOHYDRATE POLYMERS (2011)

Add to Collection

Article Materials Science, Multidisciplinary

Concept selection of car bumper beam with developed hybrid bio-composite material

M. M. Davoodi et al.

MATERIALS & DESIGN (2011)

Add to Collection

Article Materials Science, Multidisciplinary

Mechanical properties of hybrid kenaf/glass reinforced epoxy composite for passenger car bumper beam

M. M. Davoodi et al.

MATERIALS & DESIGN (2010)

Add to Collection

Article Materials Science, Multidisciplinary

Influence of fibre-surface treatment on structural, thermal and mechanical properties of jute fibre and its composite

E. Sinha et al.

BULLETIN OF MATERIALS SCIENCE (2009)

Add to Collection

Article Materials Science, Composites

Low velocity impact damage characterization of woven jute-glass fabric reinforced isothalic polyester hybrid composites

K. Sabeel Ahmed et al.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2007)

Add to Collection

Article Engineering, Industrial

A note on the conceptual design of polymeric composite automotive bumper system

SM Sapuan et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2005)

Add to Collection

Article Materials Science, Composites

Lignocellulose-based hybrid bilayer laminate composite: Part I - Studies on tensile and impact behavior of oil palm fiber-glass fiber-reinforced epoxy resin

ABA Hariharan et al.

JOURNAL OF COMPOSITE MATERIALS (2005)

Add to Collection

Article Materials Science, Composites

The mechanical performance of hybrid phenol-formaldehyde-based composites reinforced with glass and oil palm fibres

MS Sreekala et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.