☆ 4.7 Article

Effects of Polyoxymethylene Fiber on Fresh and Hardened Properties of Seawater Sea-Sand Concrete

POLYMERS (2022)

Related references

Note: Only part of the references are listed.

Article Construction & Building Technology

Seismic resistance of the corroded bimetallic steel bar under different strain amplitudes

Jianmin Hua et al.

Summary: The study evaluated the seismic resistance of concrete structures with bimetallic steel bars over the entire life cycle by clarifying the effects of corrosion ratio and fatigue strain amplitude on low-cycle fatigue properties. The experimental results showed that corrosion had little effect on the shape of hysteretic curve of BSB specimens, but increases in fatigue strain amplitude and corrosion ratio decreased the cycles to failure and total energy densities. The study also found that fatigue strain amplitude had a higher impact on low-cycle fatigue properties of the BSB specimens compared to corrosion ratio.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Engineering, Civil

Mechanical properties of stainless-clad bimetallic steel bars exposed to elevated temperatures

Jianmin Hua et al.

Summary: This article investigates the residual resistance of stainless-clad bimetallic steel bar (SCBSB) concrete structures exposed to fire. Experimental results show that no cracking occurs in the cladding layer during heating and cooling. The tensile coupon test is conducted to study the stress-strain properties of SCBSB specimens exposed to elevated temperature and cooled with different methods.

FIRE SAFETY JOURNAL (2022)

Add to Collection

Article Construction & Building Technology

Bond properties of bimetallic steel bar in seawater sea-sand concrete at different ages

Jianmin Hua et al.

Summary: This study investigates the bond properties between bimetallic steel bars and seawater sea-sand concrete, with Polyoxymethylene (POM) fibre selected to enhance the bond properties. The test results indicate that POM fibre has an adverse effect on the growth rate of bond properties between bimetallic steel bars and seawater sea-sand concrete.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Engineering, Mechanical

Fatigue properties of bimetallic steel bar: An experimental and numerical study

Jianmin Hua et al.

Summary: The corrosion of reinforcement greatly affects the life cycle service performance of reinforced concrete structures. To improve durability, the use of bimetallic steel bars, composed of stainless-steel cladding and carbon steel substrate, is suggested. Research shows that the peak stress in the stable hysteretic curve of the bimetallic steel bars gradually increases with an increase in strain amplitude.

ENGINEERING FAILURE ANALYSIS (2022)

Add to Collection

Article Construction & Building Technology

Post-fire mechanical properties of titanium-clad bimetallic steel in different cooling approaches

Yu Shi et al.

Summary: The study investigates the post-fire mechanical properties of Titanium-clad bimetallic steel (TCBS) to accurately predict the residual service capacity of steel structures after a fire. Different failure modes were determined in the TCBS depending on the fractured order. The effects of exposure temperature and cooling method on the mechanical properties are quantified and compared to reveal the post-fire performance of TCBS comprehensively.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2022)

Add to Collection

Article Construction & Building Technology

Effects of exposure temperature on low-cycle fatigue properties of Q690 high-strength steel

Jianmin Hua et al.

Summary: This paper investigates the low-cycle fatigue properties of Q690 HSS at different elevated temperatures through experimental study. The results show that the hysteretic curve tends to be fuller when the exposure temperature ranges from 700 to 900 degrees C. The effects of exposure temperature and strain amplitude on cycles to failure and total dissipated energy density are analyzed. Additionally, stress and strain coefficients are selected to analyze the stress and strain properties of post-fire Q690 HSS under low-cycle fatigue loading. A fatigue model is proposed to quantify the relation between total strain amplitude and cycles to failure, and predictive equations are suggested to quantify the effects of exposure temperature on the coefficients beta and alpha.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2022)

Add to Collection

Article Construction & Building Technology

Post-fire performance of bonding interface in explosion-welded stainless-clad bimetallic steel

Yu Shi et al.

Summary: Corrosion has a significant negative impact on the durability of structural steel, but the use of stainless-clad bimetallic steel (SCBS) can help mitigate this issue. The shear resistant properties of the bonding interface play a crucial role in the mechanical performance of SCBS. An experiment was conducted to study the effects of exposure temperature and cooling method on the bonding interface properties of SCBS. Predictive equations were suggested based on the experimental results, allowing for effective prediction of the shear resistant properties of SCBS.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2022)

Add to Collection

Article Engineering, Civil

Bond behaviour of stainless-clad bimetallic rebar in concrete

Huiyong Ban et al.

Summary: This study investigates the bond behavior of stainless-clad bimetallic rebar in concrete through a series of tests. The results provide valuable insights into the failure modes, bond-slip curves, bonding strength, and residual strength of bond. Comparisons with other types of rebars are also made. Furthermore, a constitutive relationship model and design suggestions are proposed for the practical use of stainless-clad bimetallic rebar.

STRUCTURES (2022)

Add to Collection

Article Engineering, Civil

Study on fatigue properties of post-fire bimetallic steel bar with different cooling methods

Jianmin Hua et al.

Summary: This study investigates the fatigue performances of bimetallic steel bars (BSBs) in reinforced concrete structures subject to fire incidents. The effects of different exposure temperatures and cooling methods on the structures and failure performances of BSBs are examined. A predictive model is proposed to quantify the low-cycle fatigue properties of BSBs.

STRUCTURES (2022)

Add to Collection

Article Construction & Building Technology

Relation between the Metallographic Structure and Mechanical Properties of a Bimetallic Steel Bar after Fire

Jianmin Hua et al.

Summary: Bimetallic steel bar is suitable for RC structures in corrosive environments due to its outstanding durability. The mechanical properties of BSB were found to be affected by the metallographic structure and exposure temperature, with different cooling methods resulting in changes in the substrate structure.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2022)

Add to Collection

Article Construction & Building Technology

Post-fire performance of high-strength steel plate girders developing post-buckling capacity

Jianmin Hua et al.

Summary: This study investigates the residual resistance of Q690 HSS plate girder after fire and discusses the effects of exposure temperature on its mechanical properties. Experimental and numerical investigations are performed to assess the post-fire mechanical properties of Q690 HSS and its appearance characteristics under different exposure temperatures. The results show that the exposure temperature has certain effects on the nonlinear characteristics and post-buckling capacity of Q690 HSS plate girder.

JOURNAL OF BUILDING ENGINEERING (2022)

Add to Collection

Article Construction & Building Technology

Low-cycle fatigue performance of bimetallic steel bar considering the effect of inelastic buckling

Fei Wang et al.

Summary: Reinforcement corrosion is a major factor affecting the durability of reinforced concrete structures in corrosive environments. This study proposes a bimetallic steel bar composed of stainless-steel cladding and a carbon steel substrate to address the corrosion issue. The low-cycle fatigue properties of the bimetallic steel bar were investigated, including the effect of inelastic buckling. Experimental results showed that the cyclic curves of the specimens exhibited a shuttle shape, and predictive equations were suggested to quantify the effects of slenderness ratio and fatigue strain on the fatigue properties.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Polymer Science

Effects of Polyoxymethylene Fiber on Mechanical Properties of Seawater Sea-Sand Concrete with Different Ages

Fei Wang et al.

Summary: The workability and mechanical properties of seawater sea-sand concrete (SWSSC) are similar to those of ordinary concrete. Adding polyoxymethylene (POM) fibers to SWSSC enhances its mechanical properties. The early-age mechanical properties of concrete have significant effects on the construction phase.

POLYMERS (2022)

Add to Collection

Article Construction & Building Technology

Residual monotonic mechanical properties of bimetallic steel bar with fatigue damage

Jianmin Hua et al.

Summary: This study investigates the residual bearing capacity of a reinforced concrete structure reinforced with stainless-clad bimetallic steel bars (BSBs) following an earthquake. The study explores the stress-strain nonlinear performance, failure behavior, and residual mechanical properties of BSBs with fatigue damage. The results show that fatigue damage significantly decreases the yield strength and deformation capacity of the BSB, while the ultimate strength is barely affected. This study provides valuable insights for the engineering application of BSBs in the post-earthquake evaluation of concrete structures.

JOURNAL OF BUILDING ENGINEERING (2022)

Add to Collection

Article Construction & Building Technology

Low-cycle fatigue properties of bimetallic steel bars after exposure to elevated temperature

Jianmin Hua et al.

Summary: The BSB shows promising application prospects in RC structures, with a focus on investigating the low-cycle fatigue properties after exposure to fire. The relationship between mechanical performance and metallographic structures of BSB after elevated temperatures is crucial for predicting its fatigue properties.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2021)

Add to Collection

Article Construction & Building Technology

Post- fi re mechanical properties of Q620 high-strength steel with different cooling methods

Xuhong Zhou et al.

Summary: This study investigates the post-fire mechanical properties of Q620 HSS exposed to elevated temperatures and cooled with different methods through experiments. The results show that the exposed temperature and cooling method have significant effects on the post-fire mechanical properties, leading to the proposal of predictive equations to quantify these effects.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2021)

Add to Collection

Article Construction & Building Technology

Ultimate shear resistance of S600E high-strength stainless steel plate girders

Xuan Yi Xue et al.

Summary: The S600E high-strength stainless steel exhibits higher yield strength and faster strain hardening compared to traditional stainless steel, but material property differences impact the postbuckling capacity of plate girders. Traditional design formulas are found to be too conservative for predicting the ultimate shear resistance of S600E HSSS plate girders, necessitating the proposal of modified formulas to account for these effects.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2021)

Add to Collection

Article Construction & Building Technology

Tensile and low-cycle fatigue performance of bimetallic steel bars with corrosion

Jianmin Hua et al.

Summary: The study investigated the tensile and low-cycle fatigue performance of bimetallic steel bars in a corrosive environment, finding that increasing the corrosion ratio reduced the tensile performance and proposing predictive equations for the corroded specimens. Corrosion adversely affected the low-cycle fatigue performance, shortening the steady stages of maximum loads. Increasing the corrosion ratio also influenced the fracture development zones under low-cycle fatigue loading.

JOURNAL OF BUILDING ENGINEERING (2021)

Add to Collection

Article Construction & Building Technology

Effect of carbon fiber on mechanical properties of reactive powder concrete exposed to elevated temperatures

Syed Safdar Raza et al.

Summary: The study shows that a hybrid fiber combination of carbon fiber and conventional steel fiber can improve the mechanical properties of RPC, especially under high temperature conditions. CFRPC exhibits higher residual compressive, tensile, and flexural strength at 800 degrees Celsius. Carbon fiber shows significant advantages in compressive strength and strength-per-unit weight of RPC.

JOURNAL OF BUILDING ENGINEERING (2021)

Add to Collection

Article Construction & Building Technology

Experimental and numerical investigations on corroded stainless-clad bimetallic steel bar with artificial damage

Jianmin Hu et al.

Summary: This study investigated the effects of artificial damage on the corrosion performance and mechanical properties of stainless-clad bimetallic steel bars through experimental and numerical analysis, proposing predictive equations and stress-strain models to quantify these influences accurately.

JOURNAL OF BUILDING ENGINEERING (2021)

Add to Collection

Article Construction & Building Technology

Experimental study on mechanical properties of corroded stainless-clad bimetallic steel bars

Jianmin Hua et al.

Summary: The mechanical and corrosion properties of stainless-clad bimetallic steel bars were experimentally investigated, showing that an increase in corrosion degree led to a decrease in strength and elongation. Linear and nonlinear formulas were proposed to quantify the effects of corrosion on material properties, with specified limitation ranges for corrosion degrees.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Engineering, Civil

Compressive stress?strain behaviour of stainless steel reinforcing bars with the effect of inelastic buckling

J. Limbert et al.

Summary: This paper focuses on the stress-strain behavior of stainless steel reinforcing bars, comparing the performance differences of austenitic and duplex stainless steel reinforcing bars in tension and compression tests, and proposes a new compressive stress-strain constitutive model.

ENGINEERING STRUCTURES (2021)

Add to Collection

Article Construction & Building Technology

The effect of chloride ingress in reinforced geopolymer concrete exposed in the marine environment

Kirubajiny Pasupathy et al.

Summary: This paper investigates the durability of slag-based geopolymer concrete in the marine environment and finds that it has lower resistance to chloride penetration compared to ordinary Portland Cement concrete. The study also shows that the microstructural changes due to chloride attack in the geopolymer concrete differ from those in the OPC concrete.

JOURNAL OF BUILDING ENGINEERING (2021)

Add to Collection

Article Construction & Building Technology

Characterization of the mechanical properties of eco-friendly concrete made with untreated sea sand and seawater based on statistical analysis

Menghuan Guo et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Construction & Building Technology

Tests and modelling on cyclic behaviour of stainless-clad bimetallic steel

Huiyong Ban et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Corrosion behavior of austenitic 304L and 316LN stainless steel clad reinforcing bars in cracked concrete

Ibrahim G. Ogunsanya et al.

MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2020)

Add to Collection

Article Construction & Building Technology

Investigation on early-age hydration, mechanical properties and microstructure of seawater sea sand cement mortar

Peiran Li et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Review Construction & Building Technology

A review of mechanical properties of fibre reinforced concrete at elevated temperatures

Heyang Wu et al.

CEMENT AND CONCRETE RESEARCH (2020)

Add to Collection

Article Construction & Building Technology

Effects of incorporating hybrid fibres on rheological and mechanical properties of fibre reinforced concrete

Souvik Das et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Construction & Building Technology

Mechanical properties of seawater sea-sand concrete reinforced with discrete BFRP-Needles

Zhiqiang Dong et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Experimental Research on Uniaxial Compression Constitutive Model of Hybrid Fiber-Reinforced Cementitious Composites

Tao Cui et al.

MATERIALS (2019)

Add to Collection

Article Construction & Building Technology

Mechanical behavior of concrete using seawater and sea-sand with recycled coarse aggregates

Jianzhuang Xiao et al.

STRUCTURAL CONCRETE (2019)

Add to Collection

Article Construction & Building Technology

Life cycle cost analysis of structural concrete using seawater, recycled concrete aggregate, and GFRP reinforcement

Adel Younis et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Construction & Building Technology

Corrosion characteristics of S23043 duplex stainless steel bars

Xun Wu et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Construction & Building Technology

Experimental investigation on static and dynamic mechanical properties of steel fiber reinforced ultra-high-strength concretes

Liu Jin et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Construction & Building Technology

Effects of steel fiber content and type on static mechanical properties of UHPCC

G. M. Ren et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Construction & Building Technology

Fresh and hardened properties of seawater-mixed concrete

Adel Younis et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Restrained Shrinkage Cracking of Fiber-Reinforced High-Strength Concrete

Ashkan Saradar et al.

FIBERS (2018)

Add to Collection

Review Construction & Building Technology

Use of sea-sand and seawater in concrete construction: Current status and future opportunities

Jianzhuang Xiao et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Add to Collection

Article Mechanics

Mechanical performance of novel cement-based composites prepared with nano-fibres, and hybrid nano- and micro-fibres

S. Alrekabi et al.

COMPOSITE STRUCTURES (2017)

Add to Collection

Article Engineering, Multidisciplinary

Mechanical and micromechanical tensile strength of eucalyptus bleached fibers reinforced polyoxymethylene composites

Francesc X. Espinach et al.

COMPOSITES PART B-ENGINEERING (2017)

Add to Collection

Article Green & Sustainable Science & Technology

Mechanical behavior of self-compacting concrete pavements incorporating recycled tire rubber crumb and reinforced with polypropylene fiber

Saeid Hesami et al.

JOURNAL OF CLEANER PRODUCTION (2016)

Add to Collection

Article Construction & Building Technology

Basalt fiber ropes and rods: Durability tests for their use in building engineering

Enrico Quagliarini et al.

JOURNAL OF BUILDING ENGINEERING (2016)

Add to Collection

Article Construction & Building Technology

Mechanical properties of steel fiber reinforced high strength lightweight self-compacting concrete (SHLSCC)

Shahid Iqbal et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Add to Collection

Article Construction & Building Technology

Combined effect of metakaolin and sea water on performance and microstructures of concrete

Zhiguang Shi et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Add to Collection

Article Construction & Building Technology

Corrosion effects on the mechanical properties of reinforcing steel bars. Fatigue and σ-ε behavior

Ignasi Fernandez et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Add to Collection

Article Construction & Building Technology

Three-dimensional corrosion pit measurement and statistical mechanical degradation analysis of deformed steel bars subjected to accelerated corrosion

Fujian Tang et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

Add to Collection

Article Materials Science, Composites

Free vibration analysis of angle-ply laminate composite beams by mixed finite element formulation using the Gateaux differential

Atilla Ozutok et al.

SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS (2014)

Add to Collection

Article Engineering, Multidisciplinary

Effect of poly(ethylene oxide) on tribological performance and impact fracture behavior of polyoxymethylene/polytetrafluoroethylene fiber composites

Yang Gao et al.

COMPOSITES PART B-ENGINEERING (2011)

Add to Collection

Article Engineering, Civil

Temperature as an Accelerating Factor for Long-Term Durability Testing of FRPs: Should There Be Any Limitations?

Mathieu Robert et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2010)

Add to Collection

Article Engineering, Civil

Durability prediction for GFRP reinforcing bars using short-term data of accelerated aging tests

Yi Chen et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2006)

Add to Collection

© Peeref 2019-2024. All rights reserved.