☆ 4.7 Review

Recent Advances in Limiting Fatigue Damage Accumulation Induced by Self-Heating in Polymer-Matrix Composites

POLYMERS (2022)

Related references

Note: Only part of the references are listed.

Review Thermodynamics

Thermal management of polymer electrolyte membrane fuel cells: A critical review of heat transfer mechanisms, cooling approaches, and advanced cooling techniques analysis

Yicheng Huang et al.

Summary: Thermal management is crucial for improving the efficiency and durability of PEMFCs. This paper comprehensively reviews the heat transfer mechanisms and cooling techniques available for PEMFCs. It is found that adopting proper cooling methods/thermal management strategies can significantly enhance the performance of fuel cell systems.

ENERGY CONVERSION AND MANAGEMENT (2022)

Add to Collection

Article Engineering, Mechanical

Fatigue and fracture of ultrasonically welded aluminum alloys to carbon fiber reinforced thermoplastics

Florian Staab et al.

Summary: This study evaluates the fatigue behavior of ultrasonically welded aluminum to fiber reinforced thermoplastic joints, identifying characteristic stress levels, investigating damage behavior and failure mechanisms, and observing a drop in stiffness close to failure. The applied maximum force for a fatigue limit of 2×10^6 cycles corresponds to 35% of the maximum lap shear force for monotonic testing.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2022)

Add to Collection

Article Engineering, Mechanical

High-cycle and very-high-cycle fatigue properties of CFRP-aramid honeycomb sandwich structure in three-point bending

Changkai Wang et al.

Summary: This study investigated the high-cycle and very-high-cycle fatigue properties of CFRP aramid honeycomb sandwich structure under two different core directions. The study revealed different trends in the fatigue stiffness degradation curve and a double-linear decline feature in the S-N curve. The main failure modes of the specimens were core wrinkles, core cracks, and face delamination.

INTERNATIONAL JOURNAL OF FATIGUE (2022)

Add to Collection

Article Engineering, Mechanical

A rate-dependent constitutive model predicting the double yield phenomenon, self-heating and thermal softening in semi-crystalline polymers

P. Hao et al.

Summary: In this paper, an explicit semi-crystalline polymer (ESCP) model is proposed to study the double yield phenomenon and temperature-dependent thermomechanical response below the glass transition temperature. The model represents the yield kinetics due to morphological changes using a rheological analogue and includes viscoelastic response and network resistance. The model is validated against experimental data for nylon 101, LDPE, and PA6.

INTERNATIONAL JOURNAL OF PLASTICITY (2022)

Add to Collection

Review Engineering, Electrical & Electronic

Spray Cooling on Enhanced Surfaces: A Review of the Progress and Mechanisms

Ruina Xu et al.

Summary: The rapid development of high-power electronic, energy, and propulsion systems has led to the need for more efficient cooling techniques. Spray cooling has been proven effective in various applications, but its cooling capacity and efficiency need further improvement for next-generation ultrahigh-power applications. Surface engineering using state-of-the-art manufacturing techniques has shown promise in enhancing spray cooling, but the mechanisms of surface-enhanced spray cooling are still not well understood. This review evaluates and compares the performances of different surface structures in spray cooling and proposes a clear map of enhancement mechanisms to guide engineered surface design.

JOURNAL OF ELECTRONIC PACKAGING (2022)

Add to Collection

Article Polymer Science

Mechanical and Thermal Properties of Basalt Fibre Reinforced Polymer Lamellas for Renovation of Concrete Structures

Szymon Grzesiak et al.

Summary: This research explores the possibility of using basalt fiber reinforced plastics as energy-efficient structural reinforcements in building constructions, replacing highly energy-intensive carbon fiber reinforced polymers. The study investigates the properties of basalt fiber reinforced polymer composites with different matrix formulations.

POLYMERS (2022)

Add to Collection

Article Engineering, Mechanical

Fracture and fatigue of entangled and unentangled polymer networks

Dongchang Zheng et al.

Summary: In this paper, the effects of chain entanglement on fracture and fatigue of polymer networks are studied using polyacrylamide hydrogels as a model material. The study reveals that entangled polymer networks exhibit significantly enhanced fracture toughness, possibly due to the pull-out of chains and/or delocalized damage of chains around the crack tip.

EXTREME MECHANICS LETTERS (2022)

Add to Collection

Review Materials Science, Multidisciplinary

Review on polymer composites with high thermal conductivity and low dielectric properties for electronic packaging

R. Li et al.

Summary: This review discusses in detail how to balance the thermal conductivity and dielectric properties in polymer composites. The recent progress of thermally conductive fillers is summarized, and the challenges and outlooks of polymers with high thermal conductivity and low dielectric properties are outlined.

MATERIALS TODAY PHYSICS (2022)

Add to Collection

Article Materials Science, Composites

Engineering of polymer-based materials for thermal management solutions

Muhammad Maqbool et al.

Summary: The article discusses the fast development in demand for thermal management tools and the research on polymer materials. It explores the application of polymer materials for thermal management through discussions on thermal transfer phenomena and polymer engineering strategies. The article concludes by presenting research opportunities for designing new materials to meet the demand for advanced applications.

COMPOSITES COMMUNICATIONS (2022)

Add to Collection

Article Materials Science, Composites

Metal/Carbon-Fiber Hybrid Composites-Damage Evolution and Monitoring of Isothermal Fatigue at Low and Elevated Temperatures

Bilal Khatri et al.

Summary: This paper discusses the benefits of using metal/carbon-fiber hybrid composites (MCFRPs) and presents the results of fatigue experiments on these materials. The addition of steel fibers improves the performance and failure behavior of the hybrid composites under fatigue loads. The study also observes the effect of the chemical composition of the steel fibers on the material's phase transformation, potentially enabling non-destructive structural health monitoring.

JOURNAL OF COMPOSITES SCIENCE (2022)

Add to Collection

Article Engineering, Multidisciplinary

A hybrid method for determination of fatigue limit and non-destructive evaluation of composite structures after low-velocity impact loading

Andrzej Katunin et al.

Summary: This paper presents a hybrid method that combines fatigue limit evaluation with non-destructive evaluation to predict the behavior of composite structures with low-velocity impact damage. The results demonstrate the high sensitivity of the proposed method to impact damage and its ability to evaluate the fatigue life of tested structures. Recommendations for measurement setup and testing parameters are also provided.

COMPOSITES PART B-ENGINEERING (2022)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Numerical investigation of inertial, viscous, and capillary effects on the drainage process in porous media

Yuto Takeuchi et al.

Summary: This study numerically simulates the drainage process in porous media and investigates the inertial effects on saturation, interfacial lengths, and capillary pressure. The results show that larger inertia increases the saturation and interfacial length of the invading non-wetting fluid, and produces larger capillary pressure. Inertial effects are found to be minor for smaller capillary numbers.

COMPUTERS & FLUIDS (2022)

Add to Collection

Article Mechanics

An accelerated fatigue test method of polymer gears based on thermostress conversion relation

Zehua Lu et al.

Summary: This study derived a thermostress conversion relation of polymer gears and developed an accelerated fatigue test method, which reduced the test time by 45% with an average error of 10.64%.

ENGINEERING FRACTURE MECHANICS (2022)

Add to Collection

Article Mechanics

Mechanical responses of Semi-crystalline thermoplastic polymers at various temperatures

Ruyue Song et al.

Summary: This study investigates the mechanical responses of three semi-crystalline POM polymers under different loading conditions, observing permanent deformations and hysteretic responses even at low strain levels. The microstructural changes in the polymers are attributed to these mechanical loadings, with tensile and compressive loadings leading to different changes and elevated temperatures accelerating them. The POM polymers also exhibit pronounced viscoelastic responses. A mathematical model based on a multi-network approach is proposed to describe their macroscopic thermo-mechanical response, incorporating the net effect of microstructural changes.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2022)

Add to Collection

Article Chemistry, Physical

Influence of Pulse-Pause Sequences on the Self-Heating Behavior in Continuous Carbon Fiber-Reinforced Composites under Ultrasonic Cyclic Three-Point Bending Loads

Aravind Premanand et al.

Summary: This study analyzes the influence of pulse-pause combinations in ultrasonic fatigue tests on the self-heating behavior of carbon fiber reinforced polymer (CFRP) materials. The results show that the specimen heating phenomenon depends on variables such as cyclic loading amplitude, pulse-pause combination, and material damage state. It is proposed that designing experiments based on the self-heating characteristic of the composite and the glass transition temperature (Tg) of the polymer matrix can further optimize the test procedure and testing time.

MATERIALS (2022)

Add to Collection

Article Polymer Science

Numerical Study on the Effect of Matrix Self-Heating on the Thermo-Visco-Plastic Response of Continuous Fiber-Reinforced Polymers under Transverse Tensile Loading

Ruben D. B. Sevenois et al.

Summary: Fiber-reinforced thermoplastic polymers (FRP) have gained attention as attractive alternatives to thermoset-based polymers due to their recyclability and suitability for high-volume production. However, their behavior is more susceptible to environmental conditions such as humidity, temperature, and strain rate, which can trigger self-heating and thermal softening effects.

POLYMERS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

An Overview of Self-Heating Phenomena and Theory Related to Damping and Fatigue of Metals

Xijia Wu et al.

Summary: This paper gives an overview of the self-heating phenomena and the continuum thermodynamics framework related to the damping and fatigue of metals. It discusses the three phases of the self-heating process under cyclic loading, the use of infrared thermographic techniques for temperature measurement, and the introduction of the Tanaka-Mura-Wu model to describe fatigue crack nucleation. The paper also proposes a unified framework of deformation, damping, fatigue, and self-heating for structural design.

APPLIED SCIENCES-BASEL (2022)

Add to Collection

Review Engineering, Multidisciplinary

Recent applications of carbon-based composites in defence industry: A review

M. M. Harussani et al.

Summary: Carbon-based composites have attracted a lot of attention in defense technologies due to their significant physical capabilities, superior thermal and mechanical stability, and eco-friendly nature. This review article discusses the characteristics and applications of carbon-based materials and composites in defense sectors such as aerospace, maritime, automotive, electronics, energy storage, electromagnetic interference shielding, and structures. Carbon-based composites have a promising future in defense technology, particularly in chemical sensors, drug delivery agents, radar technologies, and nano-composites.

DEFENCE TECHNOLOGY (2022)

Add to Collection

Article Thermodynamics

A new thermal conductivity relational expression for polymer composites with constructal design fillers

Xiaojian Wang et al.

Summary: In this study, a new relational expression is established to reveal the thermal conductivity performance of constructal fillers and the effect of filler shape. The thermal conductivity of the composite material goes through different stages with the increase of thermal contact resistance.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2022)

Add to Collection

Article Engineering, Mechanical

Experimental investigation on in-plane shear fatigue failure criteria of ± 45° angle-ply carbon epoxy composite

Sepanta Mandegarian et al.

Summary: This paper focuses on the response of materials under different loading conditions, particularly fatigue, in the design of load-bearing composite elements. By studying the variation of in-plane shear properties, a strain-based fatigue life criterion is proposed, which is validated through fatigue experiments.

INTERNATIONAL JOURNAL OF FATIGUE (2022)

Add to Collection

Article Chemistry, Physical

Estimating Low- and High-Cyclic Fatigue of Polyimide-CF-PTFE Composite through Variation of Mechanical Hysteresis Loops

Sergey V. Panin et al.

Summary: The fatigue properties of neat polyimide and polyimide composite were studied under different cyclic loading conditions. The accumulation of cyclic damage was analyzed by calculating parameters of mechanical hysteresis loops.

MATERIALS (2022)

Add to Collection

Article Polymer Science

Influence of Stress Level and Fibre Volume Fraction on Fatigue Performance of Glass Fibre-Reinforced Polyester Composites

Mahmoud Yousry Zaghloul et al.

Summary: Fibre-reinforced polymeric composite materials are increasingly being used in the repair and replacement of metallic materials due to their high stiffness. This study investigates the effects of fibre volume fraction and stress level on the fatigue performance of glass fibre-reinforced polyester (GFRP) composites, and validates prediction models for fatigue life.

POLYMERS (2022)

Add to Collection

Article Materials Science, Characterization & Testing

Time-resolved ex situ Raman/FT-IR spectroscopic study of structural changes in polymeric gears during operation: Towards the development of operando spectroscopic systems for polymer gears

H. Okubo et al.

Summary: This study used time-resolved ex situ Raman and FT-IR spectroscopy to monitor structural changes in a PA66 gear during operation and revealed the failure mechanisms of the material.

POLYMER TESTING (2022)

Add to Collection

Article Materials Science, Composites

Fatigue behavior of hybrid continuous-discontinuous fiber-reinforced sheet molding compound composites under application-related loading conditions

M. Bartkowiak et al.

Summary: This paper presents an experimental study on the bending fatigue behavior of hybrid continuous-discontinuous sheet molding compound (SMC) composites. The results show that the hybrid composite has higher ultimate flexural strength and fatigue strength compared to the discontinuous SMC, while the relative stiffness degradation is smaller. This indicates the potential of hybrid SMC composites for structural automotive applications.

COMPOSITES PART C: OPEN ACCESS (2022)

Add to Collection

Article Engineering, Multidisciplinary

Mechanical properties and thermal conductivity of pristine and functionalized carbon nanotube reinforced metallic glass composites: A molecular dynamics approach

Sumit Sharma et al.

Summary: This study utilized molecular dynamics to investigate the effects of functionalized carbon nanotubes on the mechanical properties of metallic glass, revealing that an increase in CNT volume fraction leads to higher Young's modulus and thermal conductivity, yet functionalized SWCNT reduces the thermal conductivity of the composites.

DEFENCE TECHNOLOGY (2021)

Add to Collection

Article Instruments & Instrumentation

Vibro-thermography of calibrated defects in hybrid plates focusing on viscoelastic heat generation

Xingwang Guo et al.

Summary: Ultrasound excited vibro-thermography is utilized to detect defects in hybrid plates containing viscoelastic material. The study reveals that viscoelastic loss is the main factor causing local temperature increase over defects, and the excitation frequency and defect characteristic frequency play pivotal roles in defect detection.

QUANTITATIVE INFRARED THERMOGRAPHY JOURNAL (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Very high cycle and gigacycle fatigue of fiber-reinforced composites: A review on experimental approaches and fatigue damage mechanisms

Peyman Shabani et al.

Summary: This comprehensive review focuses on the high cycle and gigacycle fatigue of fiber-reinforced composite materials, categorizing different test methods and fatigue behavior, as well as presenting models for predicting fatigue behavior in VHC and GC regimes. The study also highlights the need for further investigation in certain areas to deepen understanding in the field.

PROGRESS IN MATERIALS SCIENCE (2021)

Add to Collection

Article Engineering, Mechanical

Fatigue-driven failure criterion for progressive damage modelling and fatigue life prediction of composite structures

Jun-jiang Xiong et al.

Summary: This study aims to assess the fatigue lifetime of a full-scale composite cabin through experimental and numerical methods. A new fatigue-driven failure criterion was devised based on multiaxial fatigue-induced residual strength. Experimental observations showed that fatigue damage initiated at a specific location and led to the failure of the cabin.

INTERNATIONAL JOURNAL OF FATIGUE (2021)

Add to Collection

Article Engineering, Multidisciplinary

Simulation and measurement of the self-heating phenomenon of carbon/epoxy laminated composites under fatigue loading

A. H. Mirzaei et al.

Summary: The study developed a generated-dissipated energy model and coupled it with a progressive fatigue damage model to create a self-heating model, successfully simulating the self-heating phenomenon in laminated composites under fatigue loading. Experimental validation demonstrated the model's accurate prediction of temperature rise in composite specimens.

COMPOSITES PART B-ENGINEERING (2021)

Add to Collection

Article Thermodynamics

Numerical studies on effective thermal conductivities of the glass/polyimide composite materials under the conditions of conduction & radiation

Mingyue Liu et al.

Summary: This study investigated the thermal properties of glass/polyimide composite materials through numerical simulations, revealing the effects of different factors on the effective thermal conductivity of composite materials and proposing potential applications in aviation and space.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Thermodynamics

Exergoeconomic analysis of a Peltier effect air cooler using experimental data

Hazim Moria et al.

Summary: This research comprehensively studied the economic characteristics of Peltier module as an air cooler through experimental investigation, revealing the variation of economic features under different working conditions.

APPLIED THERMAL ENGINEERING (2021)

Add to Collection

Article Materials Science, Composites

Enhanced thermal conductivity of carbon nitride-doped graphene/polyimide composite film via a deciduous-like strategy

Yanyan Wang et al.

Summary: By doping reduced graphene oxide with carbon nitride into polyimide film, a high thermal conductivity and excellent electrical insulation at low filler loading were achieved.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Characterization & Testing

High cycle fatigue behaviour of autoclave-cured woven carbon fibre-reinforced polymer composite gears

Damijan Zorko et al.

Summary: The study investigated high cycle fatigue behavior of autoclave-cured carbon fiber-reinforced polymer (CFRP) composite gears, identifying epoxy matrix microcracking as the main mechanism leading to final delamination failure. CFRP gears showed significantly improved performance and longer fatigue lifespan compared to other materials.

POLYMER TESTING (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of carbon fiber content on thermal and electrical conductivity, EMI shielding efficiency, and radiation energy of CMC/PVA composite papers with carbon fibers

Bo-Kyung Choi et al.

Summary: The study examined the properties of CMC/PVA/CF composite paper fabricated by a wet-laid process, with the most efficient CF3 composition found to contain 92% CMC, 5% CF, and 3% PVA.

SYNTHETIC METALS (2021)

Add to Collection

Article Mechanics

Damage-entropy model for fatigue life evaluation of off-axis unidirectional composites

B. Mohammadi et al.

Summary: This study investigated the capability of the damage-entropy model in predicting fatigue life of off-axis unidirectional composites. It considered the microcontinuum damage mechanics and fracture fatigue entropy as a fatigue failure criterion, taking into account self-heating, temperature evolution, and viscoelastic properties. The model was validated through experiments on T800H/2500 and E-glass/epoxy composites, showing good agreement between predicted and experimental fatigue life.

COMPOSITE STRUCTURES (2021)

Add to Collection

Article Materials Science, Composites

Robust electromagnetic interference shielding, joule heating, thermal conductivity, and anti-dripping performances of polyoxymethylene with uniform distribution and high content of carbon-based nanofillers

Jie Li et al.

Summary: A new strategy was introduced to fabricate PMCNT and PMGNP composites with high contents of MWCNT and GNP by assisting of miscible PLLA, showing robust EMI shielding effectiveness, Joule heating, thermal conductivity, and anti-dripping performance. The composites exhibited high electrical and through plane thermal conductivities, along with excellent Joule heating performance and solvent resistance, making them potentially applicable in extreme environments.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Engineering, Mechanical

An approach for fatigue life prediction based on external heating

B. Hajshirmohammadi et al.

Summary: An approach to predict fatigue life and energy dissipation based on measuring the electrical power consumption of an external heat source is presented. Results show a direct relationship between the electric power consumption of heating coils and fatigue plastic energy dissipation, which can be used as a tool to predict fatigue life.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

Add to Collection

Article Engineering, Mechanical

Fracture and fatigue of ideal polymer networks

Shaoting Lin et al.

Summary: This study systematically investigates the fracture and fatigue of ideal polymer networks with controlled densities of dangling-chain defects. It is found that the fracture toughness and fatigue threshold of an ideal polymer network are almost the same without defects. Even after introducing a low density of dangling-chain defects, the fracture toughness and fatigue threshold of the ideal polymer network remain approximately the same. The fracture toughness of the ideal polymer network is also independent of the loading rate.

EXTREME MECHANICS LETTERS (2021)

Add to Collection

Article Polymer Science

The effects of the toughening mechanism and the molecular weights between cross-links on the fatigue resistance of epoxy polymer blends

Hajime Kishi et al.

Summary: The fatigue thresholds of epoxy polymer blends incorporating different types of preformed polymer particles were affected by the molecular weights between cross-links. The FCP curve for highly crosslinked CSR-toughened epoxy was located at higher stress intensity factor ranges than pure epoxy, while moderately cross-linked CSR-modified epoxy showed lower fatigue thresholds in comparison. Both cavitation of the CSR particles and plastic deformation of the epoxy were localized in a narrow area, demonstrating complex interactions between the particles and the epoxy materials.

POLYMER (2021)

Add to Collection

Article Materials Science, Characterization & Testing

Hysteresis in glass microsphere filled elastomers under cyclic loading

Cheng Zhang et al.

Summary: Reinforcing PDMS with glass microspheres significantly enhances its mechanical performance, with the modulus increasing significantly with the ratios of crosslinking agents and glass microspheres. All PDMS composites exhibit a clear Mullins effect, and the area of the hysteresis loop is strongly dependent on the composition.

POLYMER TESTING (2021)

Add to Collection

Review Materials Science, Composites

A mini review on thermally conductive polymers and polymer-based composites

Yanfei Xu et al.

Summary: The trend towards miniaturization in electronic devices has led to unprecedented power densities but also poses a bottleneck for device performance. Polymer-based materials play a crucial role in effective cooling of electronic devices, with the potential to enhance thermal conductivity through strain-induced crystallization and high-conductivity fillers.

COMPOSITES COMMUNICATIONS (2021)

Add to Collection

Article Mechanics

Hygrothermal degradation of elastic properties of fiber reinforced composites: A micro-scale finite element analysis

Meghdad Gholami et al.

Summary: This paper investigates the effect of hygrothermal conditions on the elastic properties of polymeric composite materials using the finite element method. A micromechanical degradation model is developed and verified against experimental data, utilizing ABAQUS python scripting micro modeling and parallel finite element analysis algorithms.

COMPOSITE STRUCTURES (2021)

Add to Collection

Review Construction & Building Technology

A review on the tensile behavior of fiber-reinforced polymer composites under varying strain rates and temperatures

Azzam Ahmed et al.

Summary: This study comprehensively reviews the tensile performance of FRP composites under different strain rates and temperatures, and finds that the tensile strength depends on strain rates, temperatures, and coupling effects, with different failure patterns at various strain rates and temperatures.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Mechanics

X-ray computer tomography (XCT) of fatigue damage in laser-machined versus milled carbon fiber reinforced polymer matrix composites

Michael Rose et al.

Summary: Remote laser beam cutting is an efficient non-contact cutting technology that ensures consistent cutting quality for fiber-reinforced polymers, despite the occurrence of a heat-affected zone (HAZ). This study used XCT to analyze the impact of HAZ on the fatigue behavior of CFRP, providing a non-destructive diagnostic method for the research subject.

ENGINEERING FRACTURE MECHANICS (2021)

Add to Collection

Article Engineering, Mechanical

Enhanced fatigue performance of auxetic honeycomb/substrate structures under thermal cycling

J. S. Hu et al.

Summary: This study investigates the fatigue behavior of auxetic honeycomb layer/substrate structures under thermal cycling, and proposes a theoretical model for service life analysis. The results show that auxetic structures have lower thermal stress levels and longer service life compared to non-auxetic structures, and a reduction in the relative density of the honeycomb layer will increase the structures' lifespan.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

Add to Collection

Article Chemistry, Physical

Graphene Infused Ecological Polymer Composites for Electromagnetic Interference Shielding and Heat Management Applications

Klaudia Zeranska-Chudek et al.

Summary: A detailed study of an ecological and dual-functional polymer composite for electromagnetic interference (EMI) shielding and heat management applications is reported. The multifunctional composites exhibit high EMI shielding efficiency exceeding 40 dB per 1 mm thick sample and thermal conductivity of 1.72 W/mK at 15 wt% nanofiller loading.

MATERIALS (2021)

Add to Collection

Review Materials Science, Multidisciplinary

A review of three-dimensional graphene networks for use in thermally conductive polymer composites: construction and applications

Ni Wu et al.

Summary: Graphene is widely used as a thermally conductive filler in polymers to enhance their thermal conductivity, but poor dispersibility in polymers limits practical use. Constructing interconnected three-dimensional graphene networks is a promising strategy to improve the thermal conductivity of polymer composites. This review summarizes recent advances, challenges, and prospects in the construction and applications of three-dimensional graphene-based polymer composites.

NEW CARBON MATERIALS (2021)

Add to Collection

Article Construction & Building Technology

Dynamic Properties and Energy Dissipation Study of Sandwich Viscoelastic Damper Considering Temperature Influence

Yeshou Xu et al.

Summary: The dynamic properties of viscoelastic dampers are significantly influenced by temperature, excitation frequency, and internal self-generated heating, requiring targeted testing and analysis.

BUILDINGS (2021)

Add to Collection

Article Materials Science, Composites

Dynamic-mechanical-thermal analysis of hybrid continuous-discontinuous sheet molding compounds

A. Trauth et al.

Summary: Sheet molding compounds (SMC) show great potential for producing lightweight structural components, with properties affected by reinforcement architecture and temperature. Hybrid SMC exhibits comparable glass transition temperature and increased damping compared to continuous carbon fiber SMC.

COMPOSITES PART C: OPEN ACCESS (2021)

Add to Collection

Article Chemistry, Physical

Flexible, multifunctional, and thermally conductive nylon/graphene nanoplatelet composite papers with excellent EMI shielding performance, improved hydrophobicity and flame resistance

Wen-yan Wang et al.

Summary: This study successfully fabricated nylon/graphene nanoplatelet (GNP) composite papers using a vacuum-assisted filtration and compression-molding method, demonstrating excellent thermal and electrical conductivity as well as EMI shielding effectiveness. The composite paper showed optimal performance at 11.8 wt% GNPs, with a thickness of about 180 μm, exhibiting outstanding thermal and electrical conductivities as well as EMI shielding effectiveness.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Article Materials Science, Composites

Manipulating thermal conductivity of polyimide composites by hybridizing micro- and nano-sized aluminum nitride for potential aerospace usage

Honglin Luo et al.

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2020)

Add to Collection

Article Mechanics

Mechanical properties of Nomex honeycomb sandwich panels under dynamic impact

Suchao Xie et al.

COMPOSITE STRUCTURES (2020)

Add to Collection

Article Engineering, Manufacturing

Synchronously improved electromagnetic interference shielding and thermal conductivity for epoxy nanocomposites by constructing 3D copper nanowires/thermally annealed graphene aerogel framework

Xutong Yang et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)

Add to Collection

Article Mechanics

Investigation of self-heating and life prediction in CFRP laminates under cyclic shear loading condition based on the infrared thermographic data

Jia Huang et al.

ENGINEERING FRACTURE MECHANICS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Modeling Self-heating under Cyclic Loading in Fiber-Reinforced Polymer Composites

Maximilian Ly et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2020)

Add to Collection

Article Materials Science, Characterization & Testing

Development of an energy-based approach for optimized frequency selection for fatigue testing on polymers - Exemplified on polyamide 6

Daniel Huelsbusch et al.

POLYMER TESTING (2020)

Add to Collection

Article Materials Science, Characterization & Testing

Self-heating 3D printed continuous carbon fiber/epoxy mesh and its application in wind turbine deicing

Yueke Ming et al.

POLYMER TESTING (2020)

Add to Collection

Article Chemistry, Physical

Very High Cycle Fatigue (VHCF) Characteristics of Carbon Fiber Reinforced Plastics (CFRP) under Ultrasonic Loading

Wenbin Cui et al.

MATERIALS (2020)

Add to Collection

Review Engineering, Multidisciplinary

Liquid cooling techniques in proton exchange membrane fuel cell stacks: A detailed survey

Mohamed H. S. Bargal et al.

ALEXANDRIA ENGINEERING JOURNAL (2020)

Add to Collection

Article Engineering, Mechanical

The history of fiber-reinforced polymer composite laminate fatigue

Anastasios P. Vassilopoulos

INTERNATIONAL JOURNAL OF FATIGUE (2020)

Add to Collection

Article Engineering, Mechanical

Evaluation of intrinsic dissipation based on self-heating effect in high-cycle metal fatigue

Qiang Guo et al.

INTERNATIONAL JOURNAL OF FATIGUE (2020)

Add to Collection

Article Polymer Science

Copper nanowires embedded in boron nitride nanosheet-polymer composites with enhanced thermal conductivities for thermal management

Chuan-Gen Yin et al.

POLYMER (2020)

Add to Collection

Article Materials Science, Composites

Carbon fiber epoxy-matrix composites with hydrothermal-carbon-coated halloysite nanotube filler exhibiting enhanced strength and thermal conductivity

Xueping Wu et al.

POLYMER COMPOSITES (2020)

Add to Collection

Article Mechanics

Influence of Air Cooling on the Fatigue of a Polymer Composite Under Self-Heating

A. Katunin et al.

MECHANICS OF COMPOSITE MATERIALS (2020)

Add to Collection

Article Engineering, Manufacturing

Vertically aligned silicon carbide nanowires/reduced graphene oxide networks for enhancing the thermal conductivity of silicone rubber composites

Jianan Song et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)

Add to Collection

Article Materials Science, Composites

Toughening of graphene-based polymer nanocomposites via tuning chemical functionalization

Farzin Najafi et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2020)

Add to Collection

Article Engineering, Mechanical

Fatigue of carbon cord-rubber composites: Effect of frequency, R ratio and life prediction using constant life models

Yinping Tao et al.

INTERNATIONAL JOURNAL OF FATIGUE (2020)

Add to Collection

Article Mechanics

A nonlinear viscoelastic constitutive model for cyclically loaded solid composite propellant

Xin Tong et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2020)

Add to Collection

Review Robotics

Creative design for sandwich structures: A review

Yixiong Feng et al.

INTERNATIONAL JOURNAL OF ADVANCED ROBOTIC SYSTEMS (2020)

Add to Collection

Article Engineering, Mechanical

Probabilistic modeling of stiffness degradation for fiber reinforced polymer under fatigue loading

Jianxiong Gao et al.

ENGINEERING FAILURE ANALYSIS (2020)

Add to Collection

Article Engineering, Multidisciplinary

Experimental and computational analysis of the polymerization overheating in thick glass/Elium® acrylic thermoplastic resin composites

Ning Han et al.

COMPOSITES PART B-ENGINEERING (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of moisture content and carbon fiber surface treatments on the interfacial shear strength of a thermoplastic-modified epoxy resin composites

M. A. A. Dzul-Cervantes et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

Add to Collection

Review Chemistry, Multidisciplinary

A review of passive methods in microchannel heat sink application through advanced geometric structure and nanofluids: Current advancements and challenges

Wan Mohd Arif Aziz Japar et al.

NANOTECHNOLOGY REVIEWS (2020)

Add to Collection

Proceedings Paper Engineering, Mechanical

Determination of Fatigue Limit by Static Thermographic Method and Classic Thermographic Method on Notched Specimens

Pietro Foti et al.

1ST MEDITERRANEAN CONFERENCE ON FRACTURE AND STRUCTURAL INTEGRITY (MEDFRACT1) (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Correlation of nanoscale interface debonding and multimode fracture in polymer carbon composites with long-term hygrothermal effects

Masoud Yekani Fard et al.

MECHANICS OF MATERIALS (2020)

Add to Collection

Article Physics, Fluids & Plasmas

Fracture of polymer networks with diverse topological defects

Shaoting Lin et al.

PHYSICAL REVIEW E (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Quantification of the Effects of Strain Rate and Nano-Reinforcement on the Performance of Adhesively Bonded Single-Lap Joints

B. Soltannia et al.

REVIEWS OF ADHESION AND ADHESIVES (2020)

Add to Collection

Article Engineering, Mechanical

Experimental fatigue behaviour of CFRP composites under vibration and thermal loading

Georgios Voudouris et al.

INTERNATIONAL JOURNAL OF FATIGUE (2020)

Add to Collection

Article Materials Science, Composites

Synergistic enhancement of thermal conductivity for low dielectric constant boron nitride-polytetrafluoroethylene composites by adding small content of graphene nanosheets

Xinzhi Cai et al.

COMPOSITES COMMUNICATIONS (2020)

Add to Collection

Article Materials Science, Composites

Determination of fatigue limit of polymeric composites in fully reversed bending loading mode using self-heating effect

Andrzej Katunin et al.

JOURNAL OF COMPOSITE MATERIALS (2019)

Add to Collection

Article Materials Science, Composites

Fatigue and tensile behaviors of fiber-reinforced thermosetting composites embedded with nanoparticles

Moustafa Mahmoud Yousry Zaghloul et al.

JOURNAL OF COMPOSITE MATERIALS (2019)

Add to Collection

Article Materials Science, Composites

Effect of interphase zone on the overall elastic properties of nanoparticle-reinforced polymer nanocomposites

Jafar Amraei et al.

JOURNAL OF COMPOSITE MATERIALS (2019)

Add to Collection

Article Materials Science, Composites

Modeling the Interphase Region in Carbon Nanotube-Reinforced Polymer Nanocomposites

Jafar Amraei et al.

POLYMER COMPOSITES (2019)

Add to Collection

Article Thermodynamics

Two-phase cooling using HFE-7100 for polymer electrolyte membrane fuel cell application

Eun Jung Choi et al.

APPLIED THERMAL ENGINEERING (2019)

Add to Collection

Article Engineering, Multidisciplinary

Highly anisotropic thermally conductive polyimide composites via the alignment of boron nitride platelets

Haitao Wang et al.

COMPOSITES PART B-ENGINEERING (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Highly Thermally Conductive Fluorinated Graphene Films with Superior Electrical Insulation and Mechanical Flexibility

Xiongwei Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Micromechanical model for prediction of the fatigue limit for unidirectional fibre composites

Bent F. Sorensen et al.

MECHANICS OF MATERIALS (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Reduced Graphene Oxide Heterostructured Silver Nanoparticles Significantly Enhanced Thermal Conductivities in Hot-Pressed Electrospun Polyimide Nanocomposites

Yongqiang Guo et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Review Engineering, Multidisciplinary

The fatigue of carbon fibre reinforced plastics - A review

Parvez Alam et al.

COMPOSITES PART B-ENGINEERING (2019)

Add to Collection

Review Polymer Science

Temperature effects on structural integrity of fiber-reinforced polymer matrix composites: A review

Xiaoyuan Pei et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2019)

Add to Collection

Article Materials Science, Composites

Investigation on very high cycle fatigue of PA66-GF30 GFRP based on fiber orientation

Chang Soon Lee et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2019)

Add to Collection

Review Thermodynamics

A review on the approaches applied for cooling fuel cells

Mandi Ramezanizadeh et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

Add to Collection

Article Mechanics

Predicting the kinetics of hysteretic self-heating of GFRPs under high-frequency cyclic loading

S. B. Sapozhnikov et al.

COMPOSITE STRUCTURES (2019)

Add to Collection

Article Materials Science, Composites

Largely enhanced thermal conductive, dielectric, mechanical and anti-dripping performance in polycarbonate/boron nitride composites with graphene nanoplatelet and carbon nanotube

Xiuxiu Jin et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2019)

Add to Collection

Article Chemistry, Physical

Experimental analysis of SiO2-Distilled water nanofluids in a Polymer Electrolyte Membrane fuel cell parallel channel cooling plate

I. A. Zakaria et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Polyacrylamide hydrogels. I. Network imperfection

Canhui Yang et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Highly Thermally Conductive Yet Electrically Insulating Polymer/Boron Nitride Nanosheets Nanocomposite Films for Improved Thermal Management Capability

Jin Chen et al.

ACS NANO (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Preparation of polyimide composites reinforced with oxygen doped boron nitride nano-sheet as multifunctional materials

Xiaoxu Liu et al.

MATERIALS & DESIGN (2019)

Add to Collection

Article Chemistry, Physical

Electromagnetic interference shielding MWCNT-Fe3O4@Ag/epoxy nanocomposites with satisfactory thermal conductivity and high thermal stability

Lei Wang et al.

CARBON (2019)

Add to Collection

Article Materials Science, Composites

Enhanced thermal conductivity of polyurethane composites via engineering small/large sizes interconnected boron nitride nanosheets

Zezhou Zhu et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2019)

Add to Collection

Article Mechanics

Microscopic analysis of failure in woven carbon fabric laminates coupled with digital image correlation and acoustic emission

Hafiz Qasim Ali et al.

COMPOSITE STRUCTURES (2019)

Add to Collection

Article Chemistry, Physical

Efficacy of hybrid nanofluid in a new microchannel heat sink equipped with both secondary channels and ribs

Mehdi Bahiraei et al.

JOURNAL OF MOLECULAR LIQUIDS (2019)

Add to Collection

Article Polymer Science

Fracture Toughness and Fatigue Threshold of Tough Hydrogels

Wenlei Zhang et al.

ACS MACRO LETTERS (2019)

Add to Collection

Review Polymer Science

Criticality of the Self-Heating Effect in Polymers and Polymer Matrix Composites during Fatigue, and Their Application in Non-Destructive Testing

Andrzej Katunin

POLYMERS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Synergistic Effect of Aligned Graphene Nanosheets in Graphene Foam for High-Performance Thermally Conductive Composites

Zhaohong Wu et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Fatigue behavior of the 3D orthogonal carbon/glass fibers hybrid composite under three-point bending

Wei Fan et al.

MATERIALS & DESIGN (2019)

Add to Collection

Proceedings Paper Engineering, Mechanical

Prediction of S-N curves at various stress ratios for structural materials

Ho Sung Kim

FATIGUE DESIGN 2019, INTERNATIONAL CONFERENCE ON FATIGUE DESIGN, 8TH EDITION (2019)

Add to Collection

Proceedings Paper Construction & Building Technology

Minimizing self-heating based fatigue degradation in polymeric composites by air cooling

Andrzej Katunin et al.

25TH INTERNATIONAL CONFERENCE ON FRACTURE AND STRUCTURAL INTEGRITY (2019)

Add to Collection

Article Mechanics

Flexural fatigue life prediction of CFRP-Nomex honeycomb sandwich beams

A. Rajaneesh et al.

COMPOSITE STRUCTURES (2018)

Add to Collection

Article Mechanics

Analysis of defect detectability in polymeric composites using self-heating based vibrothermography

Andrzej Katunin et al.

COMPOSITE STRUCTURES (2018)

Add to Collection

Article Engineering, Manufacturing

Enhanced thermal conductivity for Ag-deposited alumina sphere/epoxy resin composites through manipulating interfacial thermal resistance

Linlin Ren et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)

Add to Collection

Article Engineering, Manufacturing

Enhanced thermal conductivity of polyethylene/boron nitride multilayer sheets through annealing

Shu-Ya Yang et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)

Add to Collection

Article Engineering, Manufacturing

Enhanced thermal conductivity and ideal dielectric properties of epoxy composites containing polymer modified hexagonal boron nitride

Yunliang Jiang et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)

Add to Collection

Review Engineering, Multidisciplinary

Review of current trends in research and applications of sandwich structures

Victor Birman et al.

COMPOSITES PART B-ENGINEERING (2018)

Add to Collection

Review Engineering, Multidisciplinary

Thermally conductive polymer composites and nanocomposites: Processing-structure-property relationships

Siu N. Leung

COMPOSITES PART B-ENGINEERING (2018)

Add to Collection

Article Materials Science, Composites

Polymer composite with enhanced thermal conductivity and mechanical strength through orientation manipulating of BN

Jiantao Hu et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Damage Monitoring of Composite Components under Vibration Fatigue using Scanning Laser Doppler Vibrometer

D. Di Maio et al.

EXPERIMENTAL MECHANICS (2018)

Add to Collection

Article Engineering, Mechanical

Fatigue damage in angle-ply GFRP laminates under tension-tension fatigue

A. Vahid Movahedi-Rad et al.

INTERNATIONAL JOURNAL OF FATIGUE (2018)

Add to Collection

Article Materials Science, Composites

The effect of physical nonlinearity of the interfacial layer between carbon nanotube and polymer matrix on viscoelastic response of nanocomposite materials under harmonic loading

Mohammad Hashemi et al.

JOURNAL OF COMPOSITE MATERIALS (2018)

Add to Collection

Article Polymer Science

Roles of silica-coated layer on graphite for thermal conductivity, heat dissipation, thermal stability, and electrical resistivity of polymer composites

Yeongseon Kim et al.

POLYMER (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Ultrahigh Conductive Copper/Large Flake Size Graphene Heterostructure Thin-Film with Remarkable Electromagnetic Interference Shielding Effectiveness

Zhe Wang et al.

SMALL (2018)

Add to Collection

Article Engineering, Mechanical

Developing a new model to predict the fatigue life of cross-ply laminates using coupled CDM-entropy generation approach

Bijan Mohammadi et al.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2018)

Add to Collection

Article Chemistry, Analytical

Enhancing the effective thermal conductivity of Kapton-type polyimide sheets via the use of hexagonal boron nitride

Masashi Haruki et al.

THERMOCHIMICA ACTA (2018)

Add to Collection

Article Polymer Science

Thermoconductive Thermosetting Composites Based on Boron Nitride Fillers and Thiol-Epoxy Matrices

Isaac Isarn et al.

POLYMERS (2018)

Add to Collection

Article Mechanics

Spectroscopic evaluation of structural changes in composite materials subjected to self-heating effect

Roman Turczyn et al.

COMPOSITE STRUCTURES (2018)

Add to Collection

Article Materials Science, Composites

The synergistic effects of the micro-BN and nano-Al2O3 in micro-nano composites on enhancing the thermal conductivity for insulating epoxy resin

Wancong Bian et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2018)

Add to Collection

Article Engineering, Mechanical

Rapid evaluation of fatigue limit on thermographic data analysis

Jia Huang et al.

INTERNATIONAL JOURNAL OF FATIGUE (2017)

Add to Collection

Article Engineering, Mechanical

Fatigue damage assessment of unfilled polymers including self-heating effects

Amir K. Shojaei et al.

INTERNATIONAL JOURNAL OF FATIGUE (2017)

Add to Collection

Article Engineering, Mechanical

Fatigue damage and fatigue limits of a GFRP angle-ply laminate tested under very high cycle fatigue loading

T. J. Adam et al.

INTERNATIONAL JOURNAL OF FATIGUE (2017)

Add to Collection

Article Materials Science, Multidisciplinary

An anisotropic cyclic plasticity, creep and fatigue predictive tool for unfilled polymers

Amir K. Shojaei et al.

MECHANICS OF MATERIALS (2017)

Add to Collection

Review Engineering, Aerospace

Review of hybrid laminar flow control systems

K. S. G. Krishnan et al.

PROGRESS IN AEROSPACE SCIENCES (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Thermomechanical behavior of sandwich panels with graphitic-foam cores

Jacob M. Quintana et al.

MATERIALS & DESIGN (2017)

Add to Collection

Proceedings Paper Construction & Building Technology

Domination of self-heating effect during fatigue of polymeric composites

Andrzej Katunin

2ND INTERNATIONAL CONFERENCE ON STRUCTURAL INTEGRITY, ICSI 2017 (2017)

Add to Collection

Review Chemistry, Physical

Materials for Wind Turbine Blades: An Overview

Leon Mishnaevsky et al.

MATERIALS (2017)

Add to Collection

Article Nanoscience & Nanotechnology

BN Nanosheet/Polymer Films with Highly Anisotropic Thermal Conductivity for Thermal Management Applications

Yuanpeng Wu et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Article Mechanics

Characterization of failure mechanisms of composite structures subjected to fatigue dominated by the self-heating effect

Andrzej Katunin et al.

COMPOSITE STRUCTURES (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Learning from Natural Nacre: Constructing Layered Polymer Composites with High Thermal Conductivity

Guiran Pan et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Article Materials Science, Composites

A facile method to prepare flexible boron nitride/poly(vinyl alcohol) composites with enhanced thermal conductivity

Jun Zhang et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Constructing 3D Graphene Networks in Polymer Composites for Significantly Improved Electrical and Mechanical Properties

Peng Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Article Materials Science, Composites

Enhanced thermal conduction and influence of interfacial resistance within flexible high aspect ratio copper nanowire/polymer composites

Amit Rai et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2017)

Add to Collection

Article Materials Science, Composites

Investigation of the high and very high cycle fatigue behaviour of continuous fibre reinforced plastics by conventional and ultrasonic fatigue testing

D. Flore et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Ultrahigh Thermal Conductivity of Interface Materials by Silver-Functionalized Carbon Nanotube Phonon Conduits

Daewoo Suh et al.

ADVANCED MATERIALS (2016)

Add to Collection

Article Energy & Fuels

Nanofluids to improve the performance of PEM fuel cell cooling systems: A theoretical approach

Mohammad Rafiqul Islam et al.

APPLIED ENERGY (2016)

Add to Collection

Article Chemistry, Physical

Graphene-based thermoplastic composites and their application for LED thermal management

Er-Chieh Cho et al.

CARBON (2016)

Add to Collection

Article Mechanics

Investigation on tension-tension fatigue performances and reliability fatigue life of T700/MTM46 composite laminates

Yu Feng et al.

COMPOSITE STRUCTURES (2016)

Add to Collection

Article Mechanics

Thermal and mechanical properties of carbon fiber polymer-matrix composites with a 3D thermal conductive pathway

Guo-Cai Yu et al.

COMPOSITE STRUCTURES (2016)

Add to Collection

Article Engineering, Multidisciplinary

Effect of filler arrangement and networking of hexagonal boron nitride on the conductivity of new thermal management polymeric composites

Shahriar Ghaffari Mosanenzadeh et al.

COMPOSITES PART B-ENGINEERING (2016)

Add to Collection

Article Engineering, Multidisciplinary

Enhanced thermal properties of epoxy composite containing cubic and hexagonal boron nitride fillers for superconducting magnet applications

Seol-Hee Jeong et al.

COMPOSITES PART B-ENGINEERING (2016)

Add to Collection

Article Materials Science, Composites

Damage initiation and structural degradation through resonance vibration: Application to composite laminates in fatigue

Fabrizio Magi et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2016)

Add to Collection

Article Materials Science, Composites

Ultrasonic fatigue and microstructural characterization of carbon fiber fabric reinforced polyphenylene sulfide in the very high cycle fatigue regime

Daniel Backe et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2016)

Add to Collection

Article Physics, Multidisciplinary

Acoustic Entropy of the Materials in the Course of Degradation

Ali Kahirdeh et al.

ENTROPY (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Parametric Study of Strain Rate Effects on Nanoparticle-Reinforced Polymer Composites

B. Soltannia et al.

JOURNAL OF NANOMATERIALS (2016)

Add to Collection

Article Materials Science, Characterization & Testing

Absorptive viscoelastic coatings for full field vibration coverage measurement in vibrothermography

Jyani S. Vaddi et al.

NDT & E INTERNATIONAL (2016)

Add to Collection

Article Materials Science, Characterization & Testing

Effect of relative humidity on uniaxial cyclic softening/hardening and intrinsic heat generation of polyamide-6 polymer

Kaijuan Chen et al.

POLYMER TESTING (2016)

Add to Collection

Article Multidisciplinary Sciences

Silver Nanoparticle-Deposited Boron Nitride Nanosheets as Fillers for Polymeric Composites with High Thermal Conductivity

Fangfang Wang et al.

SCIENTIFIC REPORTS (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Thermal and mechanical properties of a multifunctional composite square honeycomb sandwich structure

Guo-Cai Yu et al.

MATERIALS & DESIGN (2016)

Add to Collection

Article Chemistry, Physical

Largely enhanced thermal conductivity of poly(vinylidene fluoride)/carbon nanotube composites achieved by adding graphene oxide

Wen-bin Zhang et al.

CARBON (2015)

Add to Collection

Article Mechanics

Multi-objective optimal design of composite rotorcraft driveshaft including strain rate and temperature effects

Todd C. Henry et al.

COMPOSITE STRUCTURES (2015)

Add to Collection

Article Mechanics

Open hole quasi-static and fatigue characterisation of 3D woven composites

S. Dai et al.

COMPOSITE STRUCTURES (2015)

Add to Collection

Article Engineering, Manufacturing

Highly thermally conductive POSS-g-SiCp/UHMWPE composites with excellent dielectric properties and thermal stabilities

Junwei Gu et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)

Add to Collection

Article Engineering, Manufacturing

Temperature effects on mixed mode I/II delamination under quasi-static and fatigue loading of a carbon/epoxy composite

Georgia Charalambous et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)

Add to Collection

Article Engineering, Manufacturing

Enhanced thermal conductivity of SiCp/PS composites by electrospinning-hot press technique

Junwei Gu et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)

Add to Collection

Article Engineering, Multidisciplinary

Thermal conductivity of polymer composites based on the length of multi-walled carbon nanotubes

Hyun Su Kim et al.

COMPOSITES PART B-ENGINEERING (2015)

Add to Collection

Article Engineering, Mechanical

Experimental-computational study towards heat generation in thick laminates under fatigue loading

F. Lahuerta et al.

INTERNATIONAL JOURNAL OF FATIGUE (2015)

Add to Collection

Article Engineering, Mechanical

Effects of mean stress and fibre volume content on the fatigue-induced damage mechanisms in CFRP

Julia Brunbauer et al.

INTERNATIONAL JOURNAL OF FATIGUE (2015)

Add to Collection

Article Engineering, Mechanical

An energy method for rapid evaluation of high-cycle fatigue parameters based on intrinsic dissipation

Qiang Guo et al.

INTERNATIONAL JOURNAL OF FATIGUE (2015)

Add to Collection

Article Mechanics

Energy dissipation in the course of the fatigue degradation: Mathematical derivation and experimental quantification

Ali Kahirdeh et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2015)

Add to Collection

Article Thermodynamics

Exceptionally high thermal conductivity of thermal grease: Synergistic effects of graphene and alumina

Wei Yu et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Thermal Insulation Composite Prepared from Carbon Foam and Silica Aerogel Under Ambient Pressure

Heguang Liu et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Viscoelastic characterization and self-heating behavior of laminated fiber composite driveshafts

Todd C. Henry et al.

MATERIALS & DESIGN (2015)

Add to Collection

Article Polymer Science

Multiscale modeling of carbon nanotube epoxy composites

A. R. Alian et al.

POLYMER (2015)

Add to Collection

Article Engineering, Mechanical

Predicting fracture energies and crack-tip fields of soft tough materials

Teng Zhang et al.

EXTREME MECHANICS LETTERS (2015)

Add to Collection

Article Nanoscience & Nanotechnology

Highly Thermal Conductive Copper Nanowire Composites with Ultralow Loading: Toward Applications as Thermal Interface Materials

Shouling Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2014)

Add to Collection

Article Engineering, Manufacturing

The effect of carbon nanoparticles on the fatigue performance of carbon fibre reinforced epoxy

J. B. Knoll et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)

Add to Collection

Article Engineering, Multidisciplinary

Criticality of degradation in composite materials subjected to cyclic loading

Ali Kahirdeh et al.

COMPOSITES PART B-ENGINEERING (2014)

Add to Collection

Article Mechanics

Stiffness reduction of cracked general symmetric laminates using a variational approach

M. Hajikazemi et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2014)

Add to Collection

Article Physics, Applied

Nanowire-filled polymer composites with ultrahigh thermal conductivity

Nikhil Balachander et al.

APPLIED PHYSICS LETTERS (2013)

Add to Collection

Article Chemistry, Physical

Anisotropically Alignable Magnetic Boron Nitride Platelets Decorated with Iron Oxide Nanoparticles

Ho Sun Lim et al.

CHEMISTRY OF MATERIALS (2013)

Add to Collection

Article Mechanics

Use of infrared thermography to investigate the fatigue behavior of a carbon fiber reinforced polymer composite

John Montesano et al.

COMPOSITE STRUCTURES (2013)

Add to Collection

Article Materials Science, Composites

Thermal conductivity of graphite filled liquid crystal polymer composites and theoretical predictions

Sung Min Ha et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2013)

Add to Collection

Review Physics, Applied

Small particles, big impacts: A review of the diverse applications of nanofluids

Robert Taylor et al.

JOURNAL OF APPLIED PHYSICS (2013)

Add to Collection

Article Materials Science, Characterization & Testing

Correlation between vibrational mode shapes and viscoelastic heat generation in vibrothermography

Roberto Montanini et al.

NDT & E INTERNATIONAL (2013)

Add to Collection

Article Engineering, Chemical

Effects of Microsized and Nanosized Carbon Fillers on the Thermal and Electrical Properties of Polyphenylene Sulfide Based Composites

Muhammad Omer Khan et al.

POLYMER ENGINEERING AND SCIENCE (2013)

Add to Collection

Article Chemistry, Physical

Thermal conductivity of MWCNT/epoxy composites: The effects of length, alignment and functionalization

Jin Gyu Park et al.

CARBON (2012)

Add to Collection

Article Chemistry, Physical

Thermal conductivity of a graphene oxide-carbon nanotube hybrid/epoxy composite

Hyungu Im et al.

CARBON (2012)

Add to Collection

Article Mechanics

Fatigue life prediction of carbon/epoxy laminates by stochastic numerical simulation

M. Naderi et al.

COMPOSITE STRUCTURES (2012)

Add to Collection

Article Materials Science, Composites

Texture, transport and mechanical properties of graphite nanoplatelet/silicone composites produced by three roll mill

M. A. Raza et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2012)

Add to Collection

Article Materials Science, Composites

Enhancement of through-thickness thermal conductivity of sandwich construction using carbon foam

Sangwook Sihn et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2012)

Add to Collection

Article Materials Science, Composites

In-plane and through-thickness properties, failure modes, damage and delamination in 3D woven carbon fibre composites subjected to impact loading

Robert Gerlach et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2012)

Add to Collection

Article Thermodynamics

Microdroplet evaporation on superheated surfaces

Shawn A. Putnam et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2012)

Add to Collection

Review Chemistry, Physical

A critical review of cooling techniques in proton exchange membrane fuel cell stacks

Guangsheng Zhang et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2012)

Add to Collection

Article Chemistry, Physical

Kinetics of polydopamine film deposition as a function of pH and dopamine concentration: Insights in the polydopamine deposition mechanism

Vincent Ball et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2012)

Add to Collection

Article Materials Science, Characterization & Testing

Innovative Ultrasonic Testing Facility for Fatigue Experiments in the VHCF Regime

Stefan Heinz et al.

MATERIALS TESTING (2012)

Add to Collection

Article Engineering, Mechanical

A numerical and experimental investigation on self-heating effects in viscoelastic dampers

J. de Cazenove et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2012)

Add to Collection

Article Materials Science, Composites

Self-heating of Polymeric Laminated Composite Plates Under the Resonant Vibrations: Theoretical and Experimental Study

A. Katunin et al.

POLYMER COMPOSITES (2012)

Add to Collection

Article Chemistry, Physical

Characterisation of graphite nanoplatelets and the physical properties of graphite nanoplatelet/silicone composites for thermal interface applications

Mohsin Ali Raza et al.

CARBON (2011)

Add to Collection

Article Engineering, Mechanical

Quantitative evaluation of fatigue damage growth in CFRP laminates that changes due to applied stress level

Atsushi Hosoi et al.

INTERNATIONAL JOURNAL OF FATIGUE (2011)

Add to Collection

Article Chemistry, Physical

Pumpless thermal management of water-cooled high-temperature proton exchange membrane fuel cells

Tae-Won Song et al.

JOURNAL OF POWER SOURCES (2011)

Add to Collection

Article Materials Science, Multidisciplinary

An investigation into hybrid carbon/glass fiber reinforced epoxy composite automotive drive shaft

M. A. Badie et al.

MATERIALS & DESIGN (2011)

Add to Collection

Article Materials Science, Multidisciplinary

Synergetic effect of hybrid boron nitride and multi-walled carbon nanotubes on the thermal conductivity of epoxy composites

Chih-Chun Teng et al.

MATERIALS CHEMISTRY AND PHYSICS (2011)

Add to Collection

Article Materials Science, Characterization & Testing

The sources of heat generation in vibrothermography

Jeremy Renshaw et al.

NDT & E INTERNATIONAL (2011)

Add to Collection

Review Polymer Science

Thermal conductivity of carbon nanotubes and their polymer nanocomposites: A review

Zhidong Han et al.

PROGRESS IN POLYMER SCIENCE (2011)

Add to Collection

Article Chemistry, Multidisciplinary

Carbon Nanotube Microarchitectures for Enhanced Thermal Conduction at Ultra low Mass Fraction in Polymer Composites

Michael Bozlar et al.

ADVANCED MATERIALS (2010)

Add to Collection

Article Engineering, Mechanical

High-cycle fatigue characteristics of quasi-isotropic CFRP laminates over 10(8) cycles (Initiation and propagation of delamination considering interaction with transverse cracks)

Atsushi Hosoi et al.

INTERNATIONAL JOURNAL OF FATIGUE (2010)

Add to Collection

Article Mechanics

An experimental approach to low-cycle fatigue damage based on thermodynamic entropy

M. Naderi et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2010)

Add to Collection

Article Engineering, Manufacturing

A novel fiber-reinforced polyethylene composite with added silicon nitride particles for enhanced thermal conductivity

Wenying Zhou et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)

Add to Collection

Article Materials Science, Composites

Viscoelastic Characterization and Self-Heating Behavior of a Flexible Matrix Composite Driveshaft

Y. Shan et al.

JOURNAL OF COMPOSITE MATERIALS (2009)

Add to Collection

Article Materials Science, Composites

Epoxy- and Polyester-Based Composites Reinforced With Glass, Carbon and Aramid Fabrics: Measurement of Heat Capacity and Thermal Conductivity of Composites by Differential Scanning Calorimetry

Volkan Cecen et al.

POLYMER COMPOSITES (2009)

Add to Collection

Article Chemistry, Multidisciplinary

Enhanced Thermal Conductivity in a Hybrid Graphite Nanoplatelet - Carbon Nanotube Filler for Epoxy Composites

Aiping Yu et al.

ADVANCED MATERIALS (2008)

Add to Collection

Article Mechanics

In-plane mechanical and thermal conductivity properties of a rectangular-hexagonal honeycomb structure

A. Bezazi et al.

COMPOSITE STRUCTURES (2008)

Add to Collection

Article Chemistry, Multidisciplinary

Correlations between percolation threshold, dispersion state, and aspect ratio of carbon nanotubes

Jing Li et al.

ADVANCED FUNCTIONAL MATERIALS (2007)

Add to Collection

Article Materials Science, Composites

High-cycle fatigue characteristics of quasi-isotropic CFRP laminates

Atsushi Hosoi et al.

ADVANCED COMPOSITE MATERIALS (2007)

Add to Collection

Article Engineering, Mechanical

Infrared thermographic techniques for non-destructive damage characterization of carbon fibre reinforced polymers during tensile fatigue testing

R. Steinberger et al.

INTERNATIONAL JOURNAL OF FATIGUE (2006)

Add to Collection

Article Multidisciplinary Sciences

Graphene-based composite materials

Sasha Stankovich et al.

NATURE (2006)

Add to Collection

Article Materials Science, Composites

Fatigue performance of an injection-molded short E-glass fiber-reinforced polyamide 6,6. I. Effects of orientation, holes, and weld line

YX Zhou et al.

POLYMER COMPOSITES (2006)

Add to Collection

Article Energy & Fuels

Numerical simulation of the aerodynamics of horizontal axis wind turbines under yawed flow conditions

C Tongchitpakdee et al.

JOURNAL OF SOLAR ENERGY ENGINEERING-TRANSACTIONS OF THE ASME (2005)

Add to Collection

Article Physics, Applied

Thermal conductivity and interfacial resistance in single-wall carbon nanotube epoxy composites

MB Bryning et al.

APPLIED PHYSICS LETTERS (2005)

Add to Collection

Article Engineering, Chemical

Fatigue performance of an injection molded talc-filled polypropylene

YX Zhou et al.

POLYMER ENGINEERING AND SCIENCE (2005)

Add to Collection

Review Thermodynamics

Challenges and opportunities of thermal management issues related to fuel cell technology and modeling

A Faghri et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2005)

Add to Collection

Article Mechanics

Accceleration of fatigue tests of polymer composite materials by using high-frequency loadings

R Apinis

MECHANICS OF COMPOSITE MATERIALS (2004)

Add to Collection

Article Physics, Applied

Interface effect on thermal conductivity of carbon nanotube composites

CW Nan et al.

APPLIED PHYSICS LETTERS (2004)

Add to Collection

Article Energy & Fuels

New fatigue data for wind turbine blade materials

JF Mandell et al.

JOURNAL OF SOLAR ENERGY ENGINEERING-TRANSACTIONS OF THE ASME (2003)

Add to Collection

Article Materials Science, Composites

Sandwich construction with carbon foam core materials

S Sihn et al.

JOURNAL OF COMPOSITE MATERIALS (2003)

Add to Collection

Article Engineering, Mechanical

On 'multi-stage' fatigue life diagrams and the relevant life-controlling mechanisms in ultrahigh-cycle fatigue

H Mughrabi

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2002)

Add to Collection

Article Engineering, Mechanical

Thermal fatigue failure induced by delamination in thermal barrier coating

YC Zhou et al.

INTERNATIONAL JOURNAL OF FATIGUE (2002)

Add to Collection

Article Engineering, Mechanical

Low-cycle fatigue of unidirectional composites:: Bi-linear S-N curves

VM Harik et al.

INTERNATIONAL JOURNAL OF FATIGUE (2002)

Add to Collection

Article Engineering, Mechanical

Rapid determination of the fatigue curve by the thermographic method

G Fargione et al.

INTERNATIONAL JOURNAL OF FATIGUE (2002)

Add to Collection

Review Mechanics

Thermomechanical behavior of nonlinearly viscoelastic materials under harmonic loading

IK Senchenkov et al.

INTERNATIONAL APPLIED MECHANICS (2001)

Add to Collection

Article Thermodynamics

Materials for thermal conduction

DDL Chung

APPLIED THERMAL ENGINEERING (2001)

Add to Collection

Article Engineering, Mechanical

Thermographic methodology for rapid determination of the fatigue limit of materials and mechanical components

G La Rosa et al.

INTERNATIONAL JOURNAL OF FATIGUE (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.