4.7 Article

Computational Micromechanics Investigation of Percolation and Effective Electro-Mechanical Properties of Carbon Nanotube/Polymer Nanocomposites using Stochastically Generated Realizations: Effects of Orientation and Waviness

Related references

Note: Only part of the references are listed.
Article Materials Science, Multidisciplinary

Piezoresistive detection of simulated hotspots and the effects of low velocity impact at the mesoscale in nanocomposite bonded energetic materials via multiphysics peridynamics modeling

Krishna Kiran Talamadupula et al.

Summary: This study proposes an embedded structural health monitoring framework where carbon nanotubes are used in polymer bonded explosives to detect hotspots. The focus is on assessing the detection of hotspots through multiphysics peridynamics modeling framework, and it is found that hotspots significantly impact the thermo-electro-mechanical response. The influence of hotspots on the energetic material under thermal and inertial loading is observed to dominate the response, with varying impact energies.

COMPUTATIONAL MATERIALS SCIENCE (2021)

Article Materials Science, Multidisciplinary

Statistical analysis of effective electro-mechanical properties and percolation behavior of aligned carbon nanotube/polymer nanocomposites via computational micromechanics

Krishna Kiran Talamadupula et al.

Summary: Carbon nanotube embedded polymer nanocomposites exhibit varied electromechanical properties depending on factors such as CNT volume fraction, dispersion, alignment, and polymer properties. Of interest is electrical percolation, where the electrical conductivity increases significantly with CNT volume fraction. The role of barrier potential in determining electrical percolation, as well as the influence of CNT alignment on properties, are key areas of focus in the study.

COMPUTATIONAL MATERIALS SCIENCE (2021)

Article Materials Science, Multidisciplinary

Mesoscale strain and damage sensing in nanocomposite bonded energetic materials under low velocity impact with frictional heating via peridynamics

Krishna Kiran Talamadupula et al.

MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2020)

Article Instruments & Instrumentation

Strain and damage sensing of polymer bonded mock energetics via piezoresistivity from carbon nanotube networks

N. Shirodkar et al.

SMART MATERIALS AND STRUCTURES (2019)

Article Materials Science, Multidisciplinary

Effects of microscale damage evolution on piezoresistive sensing in nanocomposite bonded explosives under dynamic loading via electromechanical peridynamics

Naveen Prakash et al.

MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2018)

Review Materials Science, Multidisciplinary

Piezoresistivity, Strain, and Damage Self-Sensing of Polymer Composites Filled with Carbon Nanostructures

Francis Aviles et al.

ADVANCED ENGINEERING MATERIALS (2018)

Article Instruments & Instrumentation

Anisotropic piezoresistivity characteristics of aligned carbon nanotube-polymer nanocomposites

Engin C. Sengezer et al.

SMART MATERIALS AND STRUCTURES (2017)

Article Mechanics

On the elasto-plastic behavior of CNT-polymer nanocomposites

Majid Karimi et al.

COMPOSITE STRUCTURES (2017)

Article Materials Science, Multidisciplinary

Influence of carbon nanotube on the piezoresistive behavior of multiwall carbon nanotube/polymer composites

Francis Aviles et al.

JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2016)

Article Materials Science, Multidisciplinary

Enhanced delamination detection in multifunctional composites through nanofiller tailoring

Tyler N. Tallman et al.

JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2015)

Article Nanoscience & Nanotechnology

Polymer/Carbon Nanotube Nano Composite Fibers-A Review

Yaodong Liu et al.

ACS APPLIED MATERIALS & INTERFACES (2014)

Article Materials Science, Composites

A new method for characterizing and modeling the waviness and alignment of carbon nanotubes in composites

Saeed Herasati et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2014)

Article Materials Science, Multidisciplinary

Computational micromechanics analysis of electron-hopping-induced conductive paths and associated macroscale piezoresistive response in carbon nanotube-polymer nanocomposites

A. K. Chaurasia et al.

JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2014)

Article Instruments & Instrumentation

Damage detection and conductivity evolution in carbon nanofiber epoxy via electrical impedance tomography

T N Tallman et al.

Smart Materials and Structures (2014)

Article Materials Science, Composites

Computational micromechanics modeling of piezoresistivity in carbon nanotube-polymer nanocomposites

Xiang Ren et al.

COMPOSITE INTERFACES (2013)

Article Materials Science, Composites

The effect of nanotubes waviness on mechanical properties of CNT/SMP composites

J. Nafar Dastgerdi et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2013)

Article Materials Science, Multidisciplinary

Computational micromechanics modeling of inherent piezoresistivity in carbon nanotube-polymer nanocomposites

Xiang Ren et al.

JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2013)

Article Materials Science, Multidisciplinary

Coupled electro-mechanical properties of multiwall carbon nanotube/polypropylene composites for strain sensing applications

O. Zetina-Hernandez et al.

JOURNAL OF MATERIALS SCIENCE (2013)

Article Chemistry, Multidisciplinary

Full elastic constitutive relation of non-isotropic aligned-CNT/PDMS flexible nanocomposites

A. T. Sepulveda et al.

NANOSCALE (2013)

Article Nanoscience & Nanotechnology

Multi-scale numerical simulations on piezoresistivity of CNT/polymer nanocomposites

Bin Hu et al.

NANOSCALE RESEARCH LETTERS (2012)

Review Materials Science, Composites

Carbon nanotube-polymer interactions in nanocomposites: A review

Meysam Rahmat et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2011)

Article Materials Science, Composites

Structural health monitoring of glass fiber reinforced composites using embedded carbon nanotube (CNT) fibers

N. D. Alexopoulos et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2010)

Article Engineering, Electrical & Electronic

Strain sensing capabilities of a piezoresistive MWCNT-polysulfone film

J. R. Bautista-Quijano et al.

SENSORS AND ACTUATORS A-PHYSICAL (2010)

Article Materials Science, Composites

A review and analysis of electrical percolation in carbon nanotube polymer composites

Wolfgang Bauhofer et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2009)

Article Polymer Science

Piezoresistive Characteristics of Single Wall Carbon Nanotube/Polyimide Nanocomposites

Jin Ho Kang et al.

JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2009)

Article Materials Science, Multidisciplinary

Improvement of mechanical and thermal properties of carbon nanotube composites through nanotube functionalization and processing methods

Nanda Gopal Sahoo et al.

MATERIALS CHEMISTRY AND PHYSICS (2009)

Article Materials Science, Multidisciplinary

Piezoresistive response of epoxy composites with carbon nanoparticles under tensile load

Malte H. G. Wichmann et al.

PHYSICAL REVIEW B (2009)

Article Polymer Science

Polymer/Carbon Nanotube Nanocomposites via Noncovalent Grafting with End-Functionalized Polymers

Sun Hwa Lee et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2008)

Article Nanoscience & Nanotechnology

Strain-dependent electrical resistance of multi-walled carbon nanotube/polymer composite films

Myounggu Park et al.

NANOTECHNOLOGY (2008)

Article Multidisciplinary Sciences

High-performance carbon nanotube fiber

Krzysztof Koziol et al.

SCIENCE (2007)

Article Chemistry, Multidisciplinary

Nano-electromechanical displacement sensing based on single-walled carbon nanotubes

C. Stampfer et al.

NANO LETTERS (2006)

Article Chemistry, Multidisciplinary

Carbon nanotube/polycarbonate composites as multifunctional strain sensors

W Zhang et al.

JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY (2006)

Article Instruments & Instrumentation

A carbon nanotube strain sensor for structural health monitoring

Inpil Kang et al.

SMART MATERIALS AND STRUCTURES (2006)

Article Engineering, Manufacturing

A comprehensive closed form micromechanics model for estimating the elastic modulus of nanotube-reinforced composites

Vijay Anumandla et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)

Review Materials Science, Multidisciplinary

Dispersion and alignment of carbon nanotubes in polymer matrix: A review

XL Xie et al.

MATERIALS SCIENCE & ENGINEERING R-REPORTS (2005)

Article Chemistry, Multidisciplinary

Role of interfacial effects in carbon nanotube/epoxy nanocomposite behavior

G Pécastaings et al.

JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY (2004)

Article Materials Science, Multidisciplinary

Finite element predictions for the thermoelastic properties of nanotube reinforced polymers

HR Lusti et al.

MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2004)

Article Materials Science, Composites

Fiber waviness in nanotube-reinforced polymer composites-1: Modulus predictions using effective nanotube properties

FT Fisher et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2003)

Article Physics, Applied

Effects of nanotube waviness on the modulus of nanotube-reinforced polymers

FT Fisher et al.

APPLIED PHYSICS LETTERS (2002)