Related references
Note: Only part of the references are listed.
Article
Chemistry, Applied
Xiaoyan Li et al.
Summary: Chitosan-functionalized nanosilica was electrosprayed on a spin-coated base layer to form a composite coating with a micro-nano protruding surface, showing good antibacterial properties and sustained release effect. Nanosilica with uniform size was prepared by sol-gel method and coated with quaternized chitosan. The composite coating exhibited a unique micro-nano surface structure and the contact sterilization of chitosan quaternary ammonium salt played a synergistic effect, resulting in good sterilization effect on drug-resistant Staphylococcus aureus and controlled sustained release of quaternized chitosan.
PROGRESS IN ORGANIC COATINGS
(2023)
Review
Polymer Science
Meera Moydeen Abdul Hameed et al.
Summary: This review focuses on the controlled release mechanism in different electrospinning methods and the selectivity of hydrophilic, water-soluble polymers as drug carriers. The drug delivery mechanism mainly depends on the method of drug loading, polymeric interactions, and the nature of polymer swelling, erosion, or degradation.
POLYMERS FOR ADVANCED TECHNOLOGIES
(2023)
Article
Polymer Science
Ahmed A. El-Shanshory et al.
Summary: This study aimed to develop a composite metronidazole immobilized nanofibrous scaffold based on biopolymers to accelerate the healing of secondary intention wounds. The properties of the scaffold were evaluated, including SEM, FTIR, TGA, water uptake, contact angle, porosity, mechanical properties, and antibacterial activity. In vitro cytocompatibility and in vivo wound healing experiments were also conducted. The results showed that the scaffold significantly accelerated wound healing by augmenting the transforming growth factor signaling pathway and suppressing the pro-inflammatory cytokine IL-6.
Review
Pharmacology & Pharmacy
Nura Brimo et al.
Summary: This article summarizes the application of nanomaterials in endodontic treatment, specifically focusing on the use of nanofibers for drug delivery. The increased surface area of the nanofibers allows for improved drug release. The advantages and limitations of these modern treatment materials are discussed and compared to traditional materials.
CURRENT DRUG DELIVERY
(2022)
Article
Materials Science, Multidisciplinary
Manikandan Sivan et al.
Summary: This study demonstrates that both the waveform and the frequency of the AC high-voltage signal significantly affect the electrospinnability, morphology, diameter, and productivity of PCL electrospun nanofibers. Optimization of the waveform and frequency can lead to different morphologies and productivity levels of the PCL ENF.
MATERIALS & DESIGN
(2022)
Review
Chemistry, Applied
Omar Mohammad Atta et al.
Summary: This review provides an overview of the desired properties of biobased packaging materials and discusses the potential of different natural and synthetic polymers, as well as the role of additives and nanomaterials.
FOOD HYDROCOLLOIDS
(2022)
Article
Chemistry, Multidisciplinary
Halit Muglu et al.
Summary: A series of novel bis(thio/carbohydrazone) compounds were synthesized and their structures were elucidated using various spectroscopic techniques. The compounds exhibited antioxidant activity, with thiourea-based compounds showing better activity than urea-based compounds. Among them, compound 11 showed the highest antioxidant activity. DFT calculations were performed to analyze the electronic characteristics and bond properties of the compounds.
JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS
(2022)
Article
Pharmacology & Pharmacy
Fikadu Ejeta et al.
Summary: This research successfully formulated and optimized fast disintegrating tablets (FDTs) of salbutamol sulphate (SBS) using a combination of a superdisintegrant and a subliming agent. By optimizing the formulation factors, the desired levels of disintegration time, hardness, friability, and wetting time were achieved.
CURRENT DRUG DELIVERY
(2022)
Article
Polymer Science
Duc-Nam Nguyen et al.
Summary: This study reports on a new type of functional microfiber composed of PBLG and PVDF with significantly enhanced electromechanical properties. This new material can be used in a wide range of applications such as sensors, actuators, smart materials, and biomedical engineering devices.
Review
Polymer Science
Lin Xu et al.
Summary: This review discusses the preparation technology and influencing factors of nanofiber sutures, summarizes the related research on absorbable and non-absorbable sutures, and discusses the application prospects of sutures.
Article
Biotechnology & Applied Microbiology
Yubo Liu et al.
Summary: In this study, functional F2-F4 fibers were successfully produced using advanced modified triaxial electrospinning nanotechnology with different polymer matrices, showing remarkable potential in manipulating hydrophilicity and sustained release of drug carriers.
JOURNAL OF NANOBIOTECHNOLOGY
(2022)
Article
Food Science & Technology
Aakash Upadhyay et al.
Summary: In this study, an ethylene scavenging film based on corn starch and gum acacia was developed by incorporating sepiolite nanoparticles. It was found that the addition of sepiolite improved the mechanical strength, water vapor barrier properties, and ethylene scavenging performance of the film. The film was tested with broccoli packaging, showing promising results in reducing weight loss, color change, and total soluble solids of the broccoli florets.
Review
Biochemistry & Molecular Biology
Yuqi Liu et al.
Summary: Lignin is a bioactive candidate with antioxidant, antimicrobial, and immune modulating properties, making it highly potential for biomedical applications in tissue engineering.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
(2022)
Article
Engineering, Multidisciplinary
Junping Deng et al.
Summary: Cellulose and its derivatives are bio-composites widely used in bone and cartilage tissue engineering, but there are still shortcomings that need to be addressed for their better application in bone disease treatments.
COMPOSITES PART B-ENGINEERING
(2022)
Review
Polymer Science
Weisen Han et al.
Summary: This article provides a detailed overview of the parameters and raw materials for the preparation of natural polymer-based electrospun fibers (EFs), as well as their biomedical applications. The study covers the parameters of the polymer solution and the electrospinning process, as well as the multistage structures of the fibers. Natural polymer-based EFs have significant potential in tissue engineering, drug sustained release, wound dressings, and biomedical sensors.
MACROMOLECULAR RAPID COMMUNICATIONS
(2022)
Article
Chemistry, Multidisciplinary
M. Sivan et al.
Summary: This study investigates the effects of alternating current high voltage on the spinnability of polymers and evaluates the cellular activity of electrospun nanofibrous scaffolds. The results demonstrate that the formic acid/acetic acid/acetone solvent system is a better choice for producing high-quality polycaprolactone nanofibers.
MATERIALS TODAY CHEMISTRY
(2022)
Review
Polymer Science
Chang Huang et al.
Summary: Bleeding control is crucial in healthcare, which has led to advancements in wound dressing research and development. Electrospun polyacrylonitrile nanofibers offer excellent properties for wound dressings, showing great potential in manufacturing.
Article
Polymer Science
Ionut Sebastian Vintila et al.
Summary: This study presents a method for synthesizing a nano-fibre network using coaxial electrospinning and embedding a healing agent. The results show that the use of nano-fibres filled with healing agent does not affect the mechanical properties of the matrix and allows for a larger healing area.
Article
Polymer Science
Ahmed A. Al-Ghamdi et al.
Summary: Nuclear power facilities are expanding globally to meet the increasing demand for energy. As a result, uranium recovery from secondary resources is gaining attention for its environmental protection and nuclear fuel conservation benefits. In this study, a mesoporous biosorbent of a hybrid magnetic-chitosan nanocomposite functionalized with cysteine was successfully synthesized for enhanced sorption of uranyl ions. The synthesized nanocomposite exhibited superparamagnetic properties, a unipore mesoporous structure, and selective sorption of UO22+ ions.
Review
Chemistry, Multidisciplinary
Yutong Du et al.
Summary: This article reviews the applications of glucose sensors based on electrospun nanofibers. The principles, detection methods, and advantages of glucose sensors are discussed. The enzymatic and non-enzymatic nanofiber-based glucose sensors are compared and evaluated, and potential solutions are proposed.
FRONTIERS IN CHEMISTRY
(2022)
Article
Pharmacology & Pharmacy
Menglong Wang et al.
Summary: Side-by-side electrospinning was used to prepare Janus nanofibers with cellulose acetate (CA) loaded with silver nanoparticles (Ag NPs) and polycaprolactone (PCL) dispersed with lavender oil (LO). The resulting fibers showed strong antibacterial activity and suitable hydrophobicity for wound healing applications.
Article
Biochemistry & Molecular Biology
Wenlai Jiang et al.
Summary: The purpose of this study was to develop an antibacterial food packaging film with a novel ultrathin fibrous membrane having a core-sheath structure. The results showed that the fiber film had a fine morphology and structure, and exhibited synergistic antibacterial performance. The practical application demonstrated that the fiber film effectively prolonged the fresh-keeping period of cherry tomatoes.
Article
Biochemistry & Molecular Biology
Liying Zhang et al.
Summary: In this study, a multifunctional hydrogel with photothermal conversion capability, biocompatibility, and degradation ability was successfully prepared. Additionally, the hydrogel has the potential to induce osteogenesis and showed good biocompatibility and photothermal conversion properties in both cell and animal experiments.
Article
Biochemistry & Molecular Biology
Yubo Liu et al.
Summary: In this study, core-sheath fibers based on cellulose acetate were prepared using modified triaxial electrospinning technology for controlled and sustained release of water-insoluble drugs. The optimized core-sheath structure showed better water retention and flatter sustained-release profiles compared to monolithic fibers, with potential for significant improvements in drug delivery systems.
Review
Biochemistry & Molecular Biology
Yuexin Ji et al.
Summary: Electrospun nanofiber wound dressings have unique structural characteristics and biocompatibility, showing great potential in promoting wound hemostasis and healing.
Article
Chemistry, Physical
He Lv et al.
Summary: Novel porous DMG/TiO2/PAN nanofiber mats prepared via electrospinning showed excellent adsorption and photocatalytic properties in treating Ni2+ and MB pollutants in industrial wastewater.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
(2022)
Review
Agricultural Engineering
Caoxing Huang et al.
Summary: Adhesives traditionally made from fossil-based polymers have issues of toxicity, environmental pollution, and non-renewable raw materials. Therefore, research on environmentally friendly and renewable adhesives from bio-based materials has gained attention. Lignin, a natural and renewable phenolic polymer with various functional groups, has been extensively studied for its exploitation. Despite some progress, developing lignin-based adhesives with performances surpassing fossil-based adhesives remains challenging.
INDUSTRIAL CROPS AND PRODUCTS
(2022)
Review
Nanoscience & Nanotechnology
Ping Zhao et al.
Summary: This article introduces the research progress and application of electrospun nanofibrous membranes for periodontitis treatment. Electrospun nanofibrous membranes have a large specific surface area and high porosity, which can improve the absorption capacity of proteins, promote the expression of specific genes, improve cell adhesion properties, and prevent fibroblasts from passing through the barrier membrane. Currently, various nanofibrous membranes with antibacterial, anti-inflammatory, and tissue regeneration properties have been prepared for periodontal treatment. Electrospinning has unique advantages in periodontal treatment and has potential for further development in the future.
INTERNATIONAL JOURNAL OF NANOMEDICINE
(2022)
Review
Pharmacology & Pharmacy
Deeksha Shukla et al.
Summary: This article provides a review of the synthesis mechanisms, structure-activity relationship, physico-chemical properties, and anticancer impacts of ferulic acid, as well as a review of various formulations. It aims to bridge the gap between preclinical and clinical research.
JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY
(2022)
Article
Polymer Science
Beste Elveren et al.
Summary: This article studies the preparation process of polysaccharide-based halochromic nanofibrous materials, which can change color upon exposure to different pH values. The issue of dye leaching is successfully addressed by using a complexing agent, resulting in reduced leaching by 61% to 99%.
Article
Polymer Science
Gabriel Grube dos Santos et al.
Summary: This study investigates the fabrication of piezoelectric scaffolds using the electrospinning process with poly(vinylidene fluoride) (PVDF) as a polymeric matrix and hydroxyapatite (HA) particles as a dispersed phase. The results demonstrate the successful production of membranes with micro- and nanofibers of the composite, good dispersion of HA particles in the polymer matrix, predominance of the beta-PVDF phase, and apatite growth on the membrane surface. The electrospun membranes also exhibit low cytotoxicity and hold great potential for biomedical applications in bone substitutions and wound healing.
Review
Polymer Science
Xianyang Cao et al.
Summary: This paper summarizes the pore formation mechanisms of electrospun porous nanofibers, introduces their applications in degrading pollutants in water, and briefly discusses strategies to improve their mechanical properties.
Review
Polymer Science
Yubin Bai et al.
Summary: This article reviews the piezoelectric properties of electrospun piezoelectric polymer membranes, with a focus on polyvinylidene fluoride (PVDF)-based electrospun nanofibrous membranes (NFs). It introduces various methods for increasing piezoelectric properties from the perspective of structure and species. The applications of NFs in the fields of biology, energy, and photocatalysis are also discussed, along with future research directions and development.
Review
Polymer Science
Renatha Jiffrin et al.
Summary: Electrospinning is a promising method for creating nanofiber membranes that can release drugs over time. These nanofiber composites have a large surface area to volume ratio, which aids in cell binding, drug loading, and mass transfer processes.
Article
Materials Science, Multidisciplinary
Xingcheng Zhu et al.
Summary: This study investigated the effects of electrospinning parameters on the fiber diameter and pore size of PAN nanofibrous membranes, and compared their filtration efficiency with commercial filter membranes. The results showed that electrospun PAN nanofibrous membranes had higher filtration efficiency for ultra fine dust.
FRONTIERS IN MATERIALS
(2022)
Editorial Material
Biochemistry & Molecular Biology
Deng-Guang Yu et al.
Review
Biochemistry & Molecular Biology
Yangqi Zhou et al.
Summary: Oral ulcers have significant impact on oral and systemic health, with individual differences in etiology and extent of the disease. Electrospinning technology is effective for preparing nanofiber films for the treatment of oral ulcers, offering advantages of long-term local administration.
Article
Biochemistry & Molecular Biology
Dengchao Xie et al.
Summary: This study fabricated silk fibroin-based nanoparticles loaded with resveratrol (RSV) and functionalized with Pluronic F127 (PF-127) to enhance mucus-penetrating capacity and anti-inflammatory effects. The functionalized nanoparticles showed improved mucus-penetrating property and enhanced suppression of proinflammatory cytokine secretion. In a colitis model, the PF-127 functionalized nanoparticles demonstrated better therapeutic outcomes compared to other counterparts.
Review
Biochemistry & Molecular Biology
Yihong Shen et al.
Summary: Cardiovascular disease is the leading cause of death. Biodegradable polymeric stents have attracted significant attention and research interest for their potential in cardiovascular disease treatment due to their degradability. This article reviews the advanced methods for fabricating biodegradable polymeric stents and introduces their functional modifications and future perspectives.
Review
Nutrition & Dietetics
Caoxing Huang et al.
Summary: This article summarizes the preparation and application of xylo-oligosaccharide (XOS). XOS has several advantages and is widely used in plants, humans, and animals. Understanding the preparation and application of XOS is of great significance for further research in the prebiotic field.
FRONTIERS IN NUTRITION
(2022)
Article
Chemistry, Multidisciplinary
Yanan Liu et al.
Summary: This review summarizes the exploitation of MOFs nanofibrous membranes via electrospinning and their applications in wastewater treatment, discussing the adsorption properties and mechanisms of electrospun MOFs nanofibrous membranes towards various environmental pollutants, prospecting the challenges, limitations and future development trends of electro-spun MOFs NFs.
MATERIALS TODAY CHEMISTRY
(2022)
Article
Polymer Science
Xinkuan Liu et al.
Summary: A new type of electrospun core-shell nanohybrid was fabricated using modified, coaxial electrospinning, which promoted water absorbance and cellulose gelation formation processes, ensuring a faster release of drugs for potential oral quick-disintegration drug delivery applications.
Article
Food Science & Technology
Deniz Turan
Summary: Thermoplastic polyurethane polymers with different chemical compositions were synthesized and tested for their water vapor barrier properties at different relative humidity levels. The results showed that permeability, solubility, and diffusion coefficients increased with increasing relative humidity, indicating an effect of water vapor and polymer interactions on the properties of the films.
FOOD ENGINEERING REVIEWS
(2021)
Article
Food Science & Technology
Huimin Yang et al.
Summary: During storage at 4 degrees Celsius, moisture migration of fresh-cut apple was observed with LF-NMR and MRI techniques. Water components in apple tissue were identified, and it was found that water migrated from the vacuole to cytoplasm. MRI images showed high density of water at the edge of fresh-cut apple in later stages of storage. Additionally, breakdown of cell walls and intracellular network, as well as moisture content decrease, browning and softening of fresh-cut apple were observed during storage process. Prediction models for quality indicators were also developed based on decay data.
INTERNATIONAL JOURNAL OF FOOD SCIENCE AND TECHNOLOGY
(2021)
Review
Pharmacology & Pharmacy
Ozge Esim et al.
Summary: Despite the potential drawbacks of conventional cancer treatments, novel lipid-coated nanosized drug delivery systems have gained attention for their high stability, biocompatibility, and superior efficacy, offering a promising approach to cancer therapy.
CURRENT DRUG DELIVERY
(2021)
Article
Pharmacology & Pharmacy
Eduarda Rocha Bigogno et al.
Summary: This study evaluated the applicability of Solid Dispersions (SDs) to improve both tabletability and dissolution rate of gemfibrozil, proposing a SD-based tablet formulation. Results showed that SDs were effective in enhancing the tabletability and dissolution profile of gemfibrozil, with the gemfibrozil:HPMC ratio being the main influencing factor. Tablets containing gemfibrozil-HPMC-SD and croscarmellose sodium demonstrated improved drug release and mechanical strength, highlighting the potential of HPMC-based SDs in overcoming the poor dissolution and tabletability properties of gemfibrozil.
CURRENT DRUG DELIVERY
(2021)
Article
Engineering, Environmental
Kun Zhao et al.
Summary: In this study, functional nanoparticles and nanofibrous membranes were used to successfully degrade doxycycline, with the membrane loaded with beta-FeOOH/TiO2 showing the best performance and achieving a degradation efficiency of 90.14% under natural sunlight.
CHEMICAL ENGINEERING JOURNAL
(2021)
Article
Pharmacology & Pharmacy
Jiankang Li et al.
Summary: Hyaluronic acid (HA) is widely used in medicine, particularly in the regeneration and repair of skin tissue. By utilizing HA and HA-based scaffolds, improvements can be made in issues such as burns and wound healing, with positive effects also seen in the field of aesthetics.
CURRENT DRUG DELIVERY
(2021)
Review
Pharmacology & Pharmacy
Xinchi Feng et al.
Summary: Chronic wounds remain a significant public health issue and there is a need to develop new and effective therapeutics. Various new pathways and targets have been identified for wound healing, and natural products such as herbs and amphibian skins have shown potential in targeting these pathways. Understanding the cellular and molecular mechanisms of these natural products and incorporating them into novel wound dressings and materials could improve outcomes in wound care.
CURRENT DRUG DELIVERY
(2021)
Review
Medicine, Research & Experimental
Dan Li et al.
Summary: Ferulic acid, a phenolic substance widely found in plants, has been shown to have various biological activities such as antioxidative, anti-inflammatory, anti-apoptotic, and vascular protective effects. Its mechanisms of action involve inhibition of certain signaling pathways and enzymes related to oxidative stress, inflammation, and fibrosis.
Article
Food Science & Technology
Maria Vesna Nikolic et al.
Summary: Metal oxide nanoparticles play a crucial role in smart food packaging due to their antibacterial activity, oxygen and ethylene scavenging capabilities, and sensing properties. The morphology of the nanoparticles, influenced by synthesis methods, affects their antimicrobial effectiveness. Innovative synthesis and incorporation techniques, such as solution casting and electrospinning, are used to create biopolymer films with improved properties for active packaging. Careful consideration of particle migration and cytotoxicity is necessary when selecting metal oxides for smart packaging.
TRENDS IN FOOD SCIENCE & TECHNOLOGY
(2021)
Review
Pharmacology & Pharmacy
Safaa Omer et al.
Summary: In recent years, the electrospinning process has been extensively studied for its potential applications in various fields, particularly pharmaceutical and biomedical purposes. Companies have been working to develop electrospinning equipment, technological solutions, and electrospun materials for large-scale production to meet industry requirements. Various approaches have been explored to scale-up production, with needleless and centrifugal methods gaining the most attention and applications.
Article
Polymer Science
He Lv et al.
Summary: In this study, a novel hybrid material with coating of acyclovir crystalline nanoparticles on acyclovir-polyacrylonitrile composites was fabricated using modified coaxial electrospinning. The developed nanohybrids showed advantages in modifying acyclovir release profiles, with the initial release amount being more accurately controlled and the sustained release closer to zero-order kinetic process. Adjusting the sheath fluid flow rate also allowed for easy allocation of release amounts at different stages.
Review
Chemistry, Multidisciplinary
Xiuling Zhang et al.
Summary: Electrospinning is a simple and controllable process that has attracted significant attention in the fabrication and development of nanofibers, especially for energy conversion devices like fuel cells based on oxygen reduction reaction. The components, morphology, and architecture of electrospun catalysts have a crucial impact on their electrochemical performances. Future research on electrospun nanofibrous structures can lead to the development of novel electrocatalysts with great potential.
CHEMICAL RESEARCH IN CHINESE UNIVERSITIES
(2021)
Article
Materials Science, Multidisciplinary
Caoxing Huang et al.
Summary: The study demonstrated that electrospun scaffolds incorporating gold nanoparticles have great potential in improving osteogenic bioactivities and bone regeneration, suggesting promising applications in the field of bone tissue engineering.
MATERIALS & DESIGN
(2021)
Review
Chemistry, Applied
Piyush Bhalla et al.
Summary: Skimmia laureola, also known as Kedarpati, is an evergreen shrub native to the Himalayan regions. Different parts of the plant have been traditionally used as a remedy for various diseases, and its essential oil has been evaluated for pharmacological properties such as insecticidal, antifungal, anthelmintic, antibacterial, and antioxidant activities.
JOURNAL OF ESSENTIAL OIL RESEARCH
(2021)
Article
Biochemistry & Molecular Biology
Tingbao Ning et al.
Summary: The study developed a new orodispersible membrane for the fast dissolution of diclofenac sodium using electrospun nanofibers. The membranes were composed of linear nanofibers with core-sheath inner structures and demonstrated pulsatile release of the loaded drug. This novel approach may pave the way for fast dissolution and action of poorly water-soluble drugs suitable for oral administration.
Article
Food Science & Technology
Davor Daniloski et al.
Summary: Active edible packaging materials originating from milk proteins show great potential for improving food safety, quality, and versatility, with the ability to address concerns from suppliers and consumers. Despite the benefits, regulatory issues, economics, and customer desires should be considered for successful introduction in the food sector. Milk protein-based packaging systems are expected to become an essential strategy for launching safe food products and increasing profit margins for the food industry.
TRENDS IN FOOD SCIENCE & TECHNOLOGY
(2021)
Article
Food Science & Technology
Faeghe Hosseini et al.
Summary: In this study, rosemary essential oil was encapsulated in zein-electrospun fibers at different concentrations, resulting in changes in fiber diameter and morphology. Various characterization techniques confirmed the presence of the essential oil within the fibers. The antimicrobial properties and release behavior of the fibers were influenced by pH values. The study demonstrated the potential benefits of using zein-electrospun fibers loaded with rosemary essential oil in food packaging applications.
JOURNAL OF FOOD SCIENCE
(2021)
Review
Food Science & Technology
Saurabh Sid et al.
Summary: Bio-sourced packaging materials are emerging as an alternative to conventional polymers, with natural feedstock-based biopolymers economically competitive due to their wide availability, easy processing, biodegradability, and good mechanical properties. Bio-based polyesters offer diverse alternatives with varying degrees of biodegradability. However, bio-based drop-in plastics remain the market leader for their excellent physical properties, cost-effectiveness, and durability.
TRENDS IN FOOD SCIENCE & TECHNOLOGY
(2021)
Article
Food Science & Technology
Sven Saengerlaub et al.
Summary: This study tested an oxygen scavenger system based on vacuum-deposited palladium (Pd) on PET films, which catalyzed the reaction of headspace oxygen with hydrogen in modified atmosphere packaging. Results showed that the oxygen-scavenging rate is strongly dependent on the proportion of hydrogen to oxygen, with a sufficient hydrogen excess needed for overall highest oxygen-scavenging capacity.
FOOD PACKAGING AND SHELF LIFE
(2021)
Article
Food Science & Technology
Meryem Yilmaz et al.
Summary: The study developed an oxygen indicator that can effectively detect damaged packages, improving the quality and safety of packaged foods. The oxygen indicator, produced by the electrospinning process, has characteristics such as rapid response to oxygen, short in-pack activation time, and resistance to dye leakage.
FOOD PACKAGING AND SHELF LIFE
(2021)
Review
Biochemistry & Molecular Biology
Sotirios Kiokias et al.
Summary: Phenolic acids are phytochemical compounds with antioxidant and anti-inflammatory properties, commonly found in edible botanicals like thyme and oregano. Recent clinical studies have focused on their potential health benefits against severe diseases such as cancer and cardiovascular diseases.
Review
Food Science & Technology
Cen Zhang et al.
COMPREHENSIVE REVIEWS IN FOOD SCIENCE AND FOOD SAFETY
(2020)
Article
Food Science & Technology
Viviane P. Romani et al.
Article
Polymer Science
Shixiong Kang et al.
Article
Chemistry, Physical
Menglong Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS
(2020)
Article
Chemistry, Applied
K. J. Figueroa-Lopez et al.
FOOD HYDROCOLLOIDS
(2020)
Article
Materials Science, Multidisciplinary
Amr Zaitoon et al.
Review
Engineering, Multidisciplinary
T. Senthil Muthu Kumar et al.
COMPOSITES PART B-ENGINEERING
(2019)
Review
Food Science & Technology
Jian Ju et al.
TRENDS IN FOOD SCIENCE & TECHNOLOGY
(2019)
Review
Chemistry, Applied
MohammadReza Rostami et al.
FOOD HYDROCOLLOIDS
(2019)
Article
Chemistry, Multidisciplinary
Niloufar Sharif et al.
Article
Food Science & Technology
Paula J. P. Espitia et al.
JOURNAL OF FOOD SCIENCE
(2014)
Article
Multidisciplinary Sciences
Byoung-Sun Lee et al.
SCIENTIFIC REPORTS
(2014)
Article
Chemistry, Multidisciplinary
ZC Sun et al.
ADVANCED MATERIALS
(2003)
