☆ 4.7 Article

Investigating the Bond Strength of FRP Laminates with Concrete Using LIGHT GBM and SHAPASH Analysis

POLYMERS (2022)

Related references

Note: Only part of the references are listed.

Article Engineering, Multidisciplinary

Experimental study on flexural strengthening of RC beams with NSM technique by different orientation of CFRP laminate

N. Jeevan et al.

Summary: This paper provides a brief description of using Carbon Fiber Reinforced Polymer (CFRP) laminates as strengthening materials for RC beams assessed through the Near Surface Mounted (NSM) technique. The study focuses on the orientation of the laminate as the main priority in NSM strengthening and evaluates the utilization of tensile strength and adhesive efficiency for different orientations. The results show improved ultimate loads and stiffness compared to control beams, with NSMLH technique being the most effective method of strengthening. Rating: 7 out of 10.

AIN SHAMS ENGINEERING JOURNAL (2023)

Add to Collection

Article Construction & Building Technology

Interpretable Ensemble-Machine-Learning models for predicting creep behavior of concrete

Minfei Liang et al.

Summary: This study aims to predict the creep behavior of concrete using machine learning techniques, specifically EML models such as RF, XGBoost, and LGBM, with high accuracy achieved through Bayesian Optimization and cross-validation. The SHAP values highlight the significant influence of parameters like time, compressive strength, age, humidity, and temperature on concrete creep compliance, indicating the reasonableness of the EML model predictions.

CEMENT & CONCRETE COMPOSITES (2022)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Development of ensemble machine learning approaches for designing fiber-reinforced polymer composite strain prediction model

Abdalrhman Milad et al.

Summary: The study explores the use of machine learning models to predict strain in fiber-reinforced polymer composites in civil engineering, introducing three new ensemble machine learning models and finding that the fifth input combination achieved the best modeling accuracy results. The research also shows that the developed MARS model could achieve acceptable and superior prediction results using only strain properties parameters. Overall, the study confirms the significance of the proposed ensemble machine learning models as reliable alternative computer aid models for solving the strain enhancement ratio problem.

ENGINEERING WITH COMPUTERS (2022)

Add to Collection

Article Mathematics

Ensemble Machine Learning-Based Approach for Predicting of FRP-Concrete Interfacial Bonding

Bubryur Kim et al.

Summary: This paper presents an ensemble machine learning approach capable of accurately predicting the bond strength between FRP and concrete interfaces. The proposed CatBoost algorithm outperforms other ensemble methods in terms of various performance metrics. A comparative study with existing models also demonstrates the effectiveness of the proposed method in predicting FRP-concrete interfacial bond strength.

MATHEMATICS (2022)

Add to Collection

Article Construction & Building Technology

Nonlinear numerical simulation and experimental verification of bondline strength of CFRP strips embedded in concrete for NSM strengthening applications

Ayman S. Mosallam et al.

Summary: This study focuses on assessing the bondline strength of carbon/epoxy fiber reinforced polymeric (CFRP) precured strips embedded in concrete for near-surface-mounting (NSM) applications. Experimental and numerical analysis were conducted to evaluate the interfacial bond behavior. Results showed that changing the groove geometries significantly affect the bondline strength of the NSM-CFRP system, and increasing bondline length leads to higher failure load and CFRP rupture strain.

STRUCTURAL CONCRETE (2022)

Add to Collection

Article Engineering, Civil

Experimental and intelligent modelling for predicting the amplitude of footing resting on geocell-reinforced soil bed under vibratory load

Venkateswarlu Hasthi et al.

Summary: This study developed a novel hybrid model, combining artificial neural network (ANN) with dragonfly optimizer (DFO), for predicting the displacement amplitude of geocell-reinforced footings. The performance of the model was assessed using rigorous statistical criteria and compared with other machine learning models. The results showed that the ANN-DFO model outperformed the benchmark models in predicting the displacement amplitude. The sensitivity analysis highlighted the impact of input variables on the estimation of displacement amplitude.

TRANSPORTATION GEOTECHNICS (2022)

Add to Collection

Article Construction & Building Technology

Prediction of failure modes, strength, and deformation capacity of RC shear walls through machine learning

Haoyou Zhang et al.

Summary: This study introduces a technique for predicting the seismic performance of reinforced concrete walls using machine learning methods. The XGBoost and GB algorithms accurately predicted the failure modes of RC walls, while the gradient boosting and random forest algorithms performed best in predicting the lateral strength and ultimate drift ratio of RC walls. The flexure-to-shear strength ratio and shear-to-span ratio of RC walls had a greater influence on the failure modes of RC walls.

JOURNAL OF BUILDING ENGINEERING (2022)

Add to Collection

Article Construction & Building Technology

Prediction of rapid chloride penetration resistance of metakaolin based high strength concrete using light GBM and XGBoost models by incorporating SHAP analysis

Anas Abdulalim Alabdullah et al.

Summary: This study investigates the non-linear capabilities of two machine learning prediction models, Light GBM and XGBoost, for predicting RCPT values. The study found that LightGBM surpasses XGBoost in prediction accuracy and that the W/B ratio and MK replacement are of significant importance in resisting chloride penetration.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Construction & Building Technology

Effects of groove angle and pattern on CFRP-to-concrete bond behavior of EBROG joints: Comparison of diagonal with longitudinal and transverse grooves

Fatemeh Mohammadi Ghahsareh et al.

Summary: This paper compares the bond strength, effective bond length, and bond behavior of EBROG specimens with different groove angles and patterns. The results show that longitudinal and transverse grooves have greater bond strength and effective bond length compared to diagonal grooves. Zigzag and parallel diagonal grooves yield similar bond resistance but exhibit different bond behavior.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Polymer Science

GEP Tree-Based Prediction Model for Interfacial Bond Strength of Externally Bonded FRP Laminates on Grooves with Concrete Prism

Muhammad Nasir Amin et al.

Summary: This study investigated the non-linear capability of artificial intelligence (AI)-based gene expression programming (GEP) modelling to develop a mathematical relationship for estimating the interfacial bond strength (IBS) of FRP laminates on a concrete prism with grooves. The developed model reflected close agreement between experimental and predicted results, indicating that the developed mathematical equation was reliable in estimating IBS based on the available properties of FRPs. The sensitivity and parametric analysis showed that the axial stiffness and width of FRP are the most influential parameters in contributing to IBS.

POLYMERS (2022)

Add to Collection

Article Computer Science, Interdisciplinary Applications

A novel artificial intelligence technique to predict compressive strength of recycled aggregate concrete using ICA-XGBoost model

Jin Duan et al.

Summary: Recycled aggregate concrete is being researched using artificial intelligence techniques to assess its compressive strength, with the ICA-XGBoost model proving to be the most effective among the developed models. This model can be utilized in construction engineering to ensure adequate mechanical performance and safe usage of recycled aggregate concrete for building purposes.

ENGINEERING WITH COMPUTERS (2021)

Add to Collection

Article Computer Science, Artificial Intelligence

Evaluating the bond strength of FRP-to-concrete composite joints using metaheuristic-optimized least-squares support vector regression

Junfei Zhang et al.

Summary: This study introduces a metaheuristic-optimized LSSVR model to predict the bond strength of FRP-to-concrete joints, with hyperparameters tuned using BAS algorithm and incorporating Levy flight during training. Results demonstrate high prediction accuracy on the test set and the potential for application in other structural engineering regression problems.

NEURAL COMPUTING & APPLICATIONS (2021)

Add to Collection

Article Construction & Building Technology

Concrete-to-concrete interface shear strength prediction based on explainable extreme gradient boosting approach

Ji-Gang Xu et al.

Summary: Accurate prediction of the shear strength of old and new concrete interfaces is crucial for the design and assessment of precast and retrofitted concrete structures. This study developed an explainable machine learning model for predicting interface shear strength, with the XGBoost model showing the best performance among the ML-models and outperforming empirical models. Key factors affecting predictions include reinforcement ratio, surface type, interface section width, and concrete strength.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Computer Science, Artificial Intelligence

Explaining anomalies detected by autoencoders using Shapley Additive Explanations

Liat Antwarg et al.

Summary: This study introduces a method that uses SHAP to explain anomalies detected by an autoencoder, providing a comprehensive explanation that has shown practicality and effectiveness through expert evaluation.

EXPERT SYSTEMS WITH APPLICATIONS (2021)

Add to Collection

Article Construction & Building Technology

Selected machine learning approaches for predicting the interfacial bond strength between FRPs and concrete

Miao Su et al.

Summary: This study uses machine learning methods to predict the interfacial bond strength between concrete and fiber reinforced polymers, with support vector machine showing the best performance in accuracy. The stacking strategy further improves the prediction accuracy, demonstrating the feasibility and efficiency of predicting the IBS of RC structures strengthened by FRP laminates.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Engineering, Civil

Distinguished bond behaviour of CFRP sheets in unbonded post-tensioned reinforced concrete beams versus single-lap shear tests

Phuong Phan-Vu et al.

Summary: This study investigates the difference in interfacial bond behavior between CFRP sheets and concrete blocks in single-lap shear tests compared to CFRP sheets and concrete beams. The experimental results show significant differences in debonding strain and strain distribution of CFRP sheets between the different test setups, with strengthened UPC beams exhibiting higher debonding strain than single-lap shear tests. The use of CFRP U-wraps anchors greatly enhances debonding strain in the beams. Additionally, existing codes and models for estimating bond strength of CFRP-to-concrete joints in UPC beams are evaluated.

ENGINEERING STRUCTURES (2021)

Add to Collection

Article Construction & Building Technology

Experimental Research on Bond Behaviour of Fabric Reinforced Cementitious Matrix Composites for Retrofitting Masonry Walls

Fayu Wang et al.

Summary: Fabric reinforced cementitious matrix (FRCM) composites, also known as textile reinforced mortars (TRM), are widely used in Europe to upgrade the seismic resistance of existing reinforced concrete (RC) frame buildings. It is important to determine the bond characteristics between the matrix and the masonry substrate, as well as the fabric and the matrix, to examine the effectiveness of the application. Multiple tests were conducted to investigate the bond behavior between fabric-to-matrix and matrix-to-substrate, as well as the shear bond capacity of the insulation system on a large-scale wall.

INTERNATIONAL JOURNAL OF CONCRETE STRUCTURES AND MATERIALS (2021)

Add to Collection

Article Engineering, Civil

Predicting the compaction characteristics of expansive soils using two genetic programming-based algorithms

Fazal E. Jalal et al.

Summary: In this study, new prediction models for compaction parameters of expansive soils were formulated using GEP and MEP methods, with GEP model showing relatively better performance. The proposed models accurately characterize compaction characteristics and provide robust and superior prediction results, reducing the need for time-consuming and laborious testing in geoenvironmental engineering.

TRANSPORTATION GEOTECHNICS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

A state-of-the-art review on coir fiber-reinforced biocomposites

K. M. Faridul Hasan et al.

Summary: Coir fiber-reinforced biocomposites made from coconut husks are gaining popularity due to the increasing demand for sustainable materials. The use of coconut husks transforms waste into raw materials for environmentally friendly products. The fibers are strong and stiff, providing superior properties compared to synthetic fiber composites.

RSC ADVANCES (2021)

Add to Collection

Article Ecology

Shapley additive explanations for NO2 forecasting

Maria Vega Garcia et al.

ECOLOGICAL INFORMATICS (2020)

Add to Collection

Article Engineering, Environmental

Prediction of mechanical properties of green concrete incorporating waste foundry sand based on gene expression programming

Muhammad Farjad Iqbal et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

Add to Collection

Review Engineering, Mechanical

Performances, challenges and opportunities in strengthening reinforced concrete structures by using FRPs - A state-of-the-art review

Ayesha Siddika et al.

ENGINEERING FAILURE ANALYSIS (2020)

Add to Collection

Article Engineering, Civil

Prediction model for compressive arch action capacity of RC frame structures under column removal scenario using gene expression programming

Iftikhar Azim et al.

STRUCTURES (2020)

Add to Collection

Article Engineering, Civil

Failure mode and effects analysis of RC members based on machine-learning-based SHapley Additive exPlanations (SHAP) approach

Sujith Mangalathu et al.

ENGINEERING STRUCTURES (2020)

Add to Collection

Article Biotechnology & Applied Microbiology

Modelling and experimental validation of osmotic driven energy efficient process for tea solution concentration

Ananya Bardhan et al.

ENVIRONMENTAL TECHNOLOGY & INNOVATION (2020)

Add to Collection

Article Engineering, Civil

Empirical FRP-Concrete Bond Strength Model for Externally Bonded Reinforcement on Grooves

Amirreza Moghaddas et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2019)

Add to Collection

Article Materials Science, Characterization & Testing

Combined effects of temperature, hydraulic pressure and salty concentration on the water uptake and mechanical properties of a carbon/glass fibers hybrid rod in salty solutions

Chenggao Li et al.

POLYMER TESTING (2019)

Add to Collection

Article Construction & Building Technology

Service life and life cycle assessment of reinforced concrete systems with limestone calcined clay cement (LC3)

Radhakrishna G. Pillai et al.

CEMENT AND CONCRETE RESEARCH (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Strength and Durability Study of Concrete Structures Using Aramid-Fiber-Reinforced Polymer

Rajashekhar Siddappa Talikoti et al.

FIBERS (2019)

Add to Collection

Article Construction & Building Technology

Effect of defects in externally bonded FRP reinforced concrete

Baolin Wan et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Construction & Building Technology

Epoxy interlocking: A novel approach to enhance FRP-to-concrete bond behavior

Cheng Jiang et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Construction & Building Technology

Experimental investigation into bond behavior of FRP-to-concrete under mixed-mode I/II loading

Majid Ghorbani et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Add to Collection

Article Engineering, Multidisciplinary

Strengthening of RC bridge slabs using CFRP sheets

Fahmy A. Fathelbab et al.

ALEXANDRIA ENGINEERING JOURNAL (2014)

Add to Collection

Review Construction & Building Technology

A State-of-the-Art Review on Debonding Failures of FRP Laminates Externally Adhered to Concrete

Thomas H. -K. Kang et al.

INTERNATIONAL JOURNAL OF CONCRETE STRUCTURES AND MATERIALS (2012)

Add to Collection

Article Engineering, Civil

Grooving as Alternative Method of Surface Preparation to Postpone Debonding of FRP Laminates in Concrete Beams

Davood Mostofinejad et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2010)

Add to Collection

Article Mechanics

Application of FRP laminates for strengthening of a reinforced-concrete T-beam bridge structure

O Hag-Elsafi et al.

COMPOSITE STRUCTURES (2001)

Add to Collection

Article Engineering, Civil

Brittle failure and bond development length of CFRP-concrete beams

DM Nguyen et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.