☆ 4.7 Article

Flexural Properties of Textile-Reinforced Concrete with Nonorthogonal Grids

POLYMERS (2022)

Related references

Note: Only part of the references are listed.

Article Polymer Science

Flexural Behavior of a Novel Textile-Reinforced Polymer Concrete

Daniel Heras Murcia et al.

Summary: Textile reinforced concrete (TRC) has gained attention in the construction industry for its lightweight, high tensile strength, design flexibility, corrosion resistance, and long service life. This study proposes a novel type of TRC, called textile reinforced polymer concrete (TRPC), which replaces the cement binder with a polymer resin. The TRPC showed significantly improved flexural capacity, superior ductility, and substantial plasticity compared to TRC.

POLYMERS (2022)

Add to Collection

Article Construction & Building Technology

Investigation of the flexural behavior of textile reinforced concrete with braiding yarn structure

Mutlu Kurban et al.

Summary: Textile reinforced concrete is a new construction material. This study investigates the flexural behavior of TRC samples by using braided hybrid yarn, and finds that the flexural strength and toughness increase with the use of hybrid yarn.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Engineering, Civil

Shear strengthening of reinforced concrete T-beams with anchored and non-anchored CFRP fabrics

Sakir Yazman et al.

Summary: This study investigated the strengthening of shear deficient T-beams with different CFRP configurations. Results showed that the contribution of EBR to shear capacity is significant and depended on anchorage angle and strengthening type. Among all methods, full wrapping CFRP and partial CFRP with a 45-degree anchorage type yielded the most effective results in enhancing shear capacity and stiffness while improving ductility significantly.

STRUCTURES (2022)

Add to Collection

Article Engineering, Civil

Behavior of CFRP-strengthened RC beams with circular web openings in shear zones: Numerical study

Yasin Onuralp Ozkilic et al.

Summary: This study investigates the behavior of reinforced concrete beams with circular openings and the effects of strengthening them with CFRP. Various parameters such as the opening/beam height ratio, concrete compressive strength, stirrup spacing, and CFRP application type were considered in the analysis. The study identifies important parameters that affect the performance of the beams and provides recommendations for CFRP strengthening based on different conditions.

STRUCTURES (2022)

Add to Collection

Article Engineering, Civil

Strengthening of shear-critical reinforced concrete T-beams with anchored and non-anchored GFRP fabrics applications

Sadeq A. H. AL-Shalif et al.

Summary: This study investigated the behavioral changes of reinforced concrete T-beams with insufficient shear strength when strengthened with glass fiber reinforced polymer composites (GFRP) in different configurations. The results showed that increasing the bonding surface between GFRP and concrete prevented shear failure and GFRP strips with lower bonding surface and anchorage were more effective in terms of ductility.

STRUCTURES (2022)

Add to Collection

Article Construction & Building Technology

Numerical investigation of the parameters influencing the behavior of dapped end prefabricated concrete purlins with and without CFRP strengthening

Yasin Onuralp Ozkilic et al.

Summary: This study conducted a series of numerical modeling using the finite element program ABAQUS to investigate the shear damages of prefabricated concrete purlins (PCPs). The effects of various parameters on the shear capacity of PCPs were studied, and it was found that the most significant parameter is the orientation of carbon fiber reinforced polymers (CFRP).

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Engineering, Civil

Research on flexural performance of composited RC beams with different forms of TRC permanent formwork

Shiping Yin et al.

Summary: This study compared and studied the bending performance of U-shaped and single-plate TRC template composite beams in construction using TRC as a permanent formwork, finding that the U-shaped formwork composite beam had better bending performance than the single-plate formwork composite beam. The TRC formwork composite beams showed improvements in cracking load, yield load, and ultimate load compared to ordinary reinforced concrete beams, with smaller crack widths and slower development, although with reduced ductility. Overall, the TRC formwork composite beams exhibited better load-bearing capacity and durability.

STRUCTURES (2021)

Add to Collection

Article Engineering, Civil

Research on the bonding performance of TRC permanent formwork and cast-in-place concrete

Shichang Li et al.

Summary: The study investigates the interface bond between TRC permanent formwork and cast-in-place concrete, finding that regardless of processing, the bond performance is superior to traditional formwork. By treating the interface, adjusting TRC formwork parameters, and adding chopped fibers, the ultimate bearing capacity of composite beams can be improved while reducing strain.

ENGINEERING STRUCTURES (2021)

Add to Collection

Article Chemistry, Physical

Reinforced Concrete Slabs Strengthened with Lap-Spliced Carbon TRC System

Hyeong-Yeol Kim et al.

Summary: The study introduced an accelerated construction method to strengthen reinforced concrete slab-type elements using precast lap-spliced textile-reinforced concrete panels. By experimenting with tensile behavior and flexural failure tests, the study found that the TRC system's performance was significantly influenced by the lap splice length and matrix properties. The ultimate load of strengthened RC slabs increased by up to 24% when using TRC panels, and the re-strengthening of damaged slabs with TRC panels resulted in significantly increased initial cracking load and stiffness.

MATERIALS (2021)

Add to Collection

Article Mechanics

The flexural performance of structural concrete beams reinforced with carbon textile fabrics

Nahum Lior et al.

COMPOSITE STRUCTURES (2020)

Add to Collection

Article Mechanics

Experimental analysis of reinforced concrete shear deficient beams with circular web openings strengthened by CFRP composite

Ceyhun Aksoylu et al.

COMPOSITE STRUCTURES (2020)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Bending performance of TRC-strengthened RC beams with secondary load under chloride erosion

Yu Yu-lin et al.

JOURNAL OF CENTRAL SOUTH UNIVERSITY (2019)

Add to Collection

Article Mechanics

Experimental investigation of shear capacity and damage analysis of thinned end prefabricated concrete purlins strengthened by CFRP composite

Lokman Gemi et al.

COMPOSITE STRUCTURES (2019)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Flexural performance of TRC-strengthened RC beam under chloride environment

Yin Shi-ping et al.

ANTI-CORROSION METHODS AND MATERIALS (2018)

Add to Collection

Article Construction & Building Technology

Research on the flexural performance of RC beams strengthened with TRC under the coupling action of load and marine environment

Yin Shi-ping et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Add to Collection

Article Construction & Building Technology

Study on the mechanical property of textile reinforced self-stressing concrete sheets

Boxin Wang et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

Add to Collection

Article Engineering, Civil

Experimental Investigations of the Bending Fatigue Performance of TRC-Strengthened RC Beams in Conventional and Aggressive Chlorate Environments

Shi-Ping Yin et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2016)

Add to Collection

Article Construction & Building Technology

Investigation on the flexural behavior of concrete members reinforced with epoxy resin-impregnated textiles

S. P. Yin et al.

MATERIALS AND STRUCTURES (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Improved mechanical properties of textile reinforced concrete thin plate

Yin Shiping et al.

JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION (2013)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Properties and calculation of normal section bearing capacity of RC flexural beam with skin textile reinforcement

Yin Shi-ping et al.

JOURNAL OF CENTRAL SOUTH UNIVERSITY (2013)

Add to Collection

© Peeref 2019-2024. All rights reserved.