☆ 4.7 Article

An Injecting Molding Method for Forming the HFRP/PA6 Composite Parts

POLYMERS (2022)

Related references

Note: Only part of the references are listed.

Article Mechanics

Combined effects of sustained bending loading, water immersion and fiber hybrid mode on the mechanical properties of carbon/glass fiber reinforced polymer composite

Guijun Xian et al.

Summary: The study investigated the mechanical properties of carbon/glass fiber hybrid plates and found that the random fiber hybrid mode helps to synergize the carbon and glass fibers and enhance mechanical performance. Furthermore, compared to the core-shell hybrid mode, the random hybrid mode showed a more significant increase in tensile and flexural strength after 360 days.

COMPOSITE STRUCTURES (2022)

Add to Collection

Article Engineering, Manufacturing

Dynamic behavior of screwed joints for CFRP composite laminate structures under impact loading

Ahmet Can et al.

Summary: The detachable joining techniques in composite laminates, compared to metals, are limited and considered as one of the major obstacles in developing composite structures. This study examines the dynamic behavior of screwed joints in CFRP composite laminates, finding that the damage mechanism changes with the increase of pitch, and the maximum dynamic failure loads range from 27.55 kN to 78.12 kN.

JOURNAL OF MANUFACTURING PROCESSES (2022)

Add to Collection

Article Mechanics

Mechanical performance evolution and life prediction of prestressed CFRP plate exposed to hygrothermal and freeze-thaw environments

Guijun Xian et al.

Summary: The study highlights the significant role of long-term prestressed loss and mechanical property evolution in steel/concrete structures strengthened with prestressed CFRP plates. A new prestressed tension device and anchorage system were proposed to enhance the reliability and load-bearing capacity of CFRP plates. Exposure of CFRP plates to elevated temperatures, distilled water, and sustained loading resulted in gradual degradation of tensile strength.

COMPOSITE STRUCTURES (2022)

Add to Collection

Article Polymer Science

Effect of Preload on the Weld Quality of Ultrasonic Welded Carbon-Fiber-Reinforced Nylon 6 Composite

Zengguo Tian et al.

Summary: The effect of preloading and welding pressure on the strength of carbon fiber reinforced nylon6 joints with poor contact between workpieces was studied. Preloading was found to significantly increase the joint strength, especially for joints with larger gaps.

POLYMERS (2022)

Add to Collection

Review Mechanics

A review on ultra-high cycle fatigue of CFRP

Junliang Ding et al.

Summary: This paper systematically summarizes the research progress of ultra-high cycle fatigue of carbon fiber reinforced plastic (CFRP) from three dimensions, including test methods, fatigue fracture characteristics, and fatigue damage model construction.

COMPOSITE STRUCTURES (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Mechanical and microstructural characterization of AZ31 magnesium - carbon fi ber reinforced polymer joint obtained by friction stir interlocking technique

Tianhao Wang et al.

Summary: Friction Stir Interlocking (FSI) is a process used for joining dissimilar materials with different properties by combining friction stir welding with mechanical interlocking using a third body interlock. Through microstructural characterization and lap shear tensile testing, it was found that FSI joints effectively joined carbon fiber reinforced polymer and AZ31 magnesium alloy sheets. Finite element analysis was conducted to simulate different FSI configurations, with simulation results showing good agreements with experimental data in terms of load-displacement curves and fracture paths of CFRP.

MATERIALS & DESIGN (2021)

Add to Collection

Article Engineering, Manufacturing

Salt spray aging effects on dynamic responses and failure characteristics of hybrid bonded-riveted CFRP/Al joints under high speed loading

Maojun Li et al.

Summary: This study comprehensively investigated the dynamic responses of hybrid bonded-riveted CFRP/Al joints under high speed loading and cyclic salt spray exposure conditions, revealing that loading speed can affect the load-carrying capability of the joints, and salt spray exposure leads to a progressive decline in peak load, fail displacement, and energy absorption of the joints.

JOURNAL OF MANUFACTURING PROCESSES (2021)

Add to Collection

Article Engineering, Manufacturing

Laser transmission welding of polymers - A review on welding parameters, quality attributes, process monitoring, and applications

Bappa Acherjee

Summary: This paper comprehensively reviews the five major aspects of Laser Transmission Welding (LTW) technology, including welding parameters, weld quality attributes, process monitoring techniques, material combinations, and industrial applications. Through a detailed survey of several scholarly publications, industrial studies, and scientific reports, the development and application of LTW technology are discussed.

JOURNAL OF MANUFACTURING PROCESSES (2021)

Add to Collection

Review Polymer Science

Comprehensive Review of the Properties and Modifications of Carbon Fiber-Reinforced Thermoplastic Composites

Basheer A. Alshammari et al.

Summary: Carbon fiber-reinforced thermoplastic polymers have various advantages such as high strength-to-weight ratio, high wear resistance, and recyclability, making them widely used in industrial applications. The focus of the study is on the superiority of carbon fiber-reinforced thermoplastic polymers over thermosetting and elastomer polymers, as well as the in-depth exploration of surface modification techniques.

POLYMERS (2021)

Add to Collection

Article Engineering, Manufacturing

Post-processing of 3D printed thermoplastic CFRP composites using cryogenic machining

Nicholas Cococcetta et al.

Summary: This study aims to improve the dimensional accuracy and surface finish of 3D printed CFRP composites by analyzing the effectiveness of three sustainable machining practices: dry, minimum quantity lubrication (MQL), and cryogenic machining. Results show that cryogenic machining significantly reduces burr formation and tool wear, improves surface finish, and can be a suitable post-process technique for 3D printed CFRP composites.

JOURNAL OF MANUFACTURING PROCESSES (2021)

Add to Collection

Article Chemistry, Multidisciplinary

The experimental study of CFRP interlayer of dissimilar joint AA7075-T651/Ti-6Al-4V alloys by friction stir spot welding on mechanical and microstructural properties

Tauqir Nasir et al.

Summary: This study investigated the welding of AA7075-T651 and Ti-6Al-4V alloys with additional carbon fiber-reinforced polymer using friction stir spot welding. The results showed the significant effects of welding parameters and the presence of Ti3Al and Ti-Al-C intermetallic compounds on the mechanical and microstructural properties of the weld joint. The study also found that dwell time plays an important role in determining the tensile shear load of the weld joint.

NANOTECHNOLOGY REVIEWS (2021)

Add to Collection

Article Engineering, Mechanical

Long-term service evaluation of a pultruded carbon/glass hybrid rod exposed to elevated temperature, hydraulic pressure and fatigue load coupling

Chenggao Li et al.

INTERNATIONAL JOURNAL OF FATIGUE (2020)

Add to Collection

Review Engineering, Multidisciplinary

Current status of carbon fibre and carbon fibre composites recycling

Jin Zhang et al.

COMPOSITES PART B-ENGINEERING (2020)

Add to Collection

Article Polymer Science

Polymers in gearbox production

Magdalena Sobczyk et al.

POLIMERY (2020)

Add to Collection

Article Polymer Science

Lightweight High-Performance Polymer Composite for Automotive Applications

Valentina Volpe et al.

POLYMERS (2019)

Add to Collection

Article Chemistry, Analytical

Fabrication of Micro-Structured Polymer by Micro Injection Molding Based on Precise Micro-Ground Mold Core

Yanjun Lu et al.

MICROMACHINES (2019)

Add to Collection

Article Engineering, Multidisciplinary

Interfacial structure and bonding mechanism of AZ31/carbon-fiber-reinforced plastic composites fabricated by thermal laser joining

Barton Mensah Arkhurst et al.

COMPOSITES PART B-ENGINEERING (2019)

Add to Collection

Article Mechanics

Joining of carbon fiber and aluminum using ultrasonic additive manufacturing (UAM)

Hongqi Guo et al.

COMPOSITE STRUCTURES (2019)

Add to Collection

Article Chemistry, Analytical

Manufacturing Signatures of Injection Molding and Injection Compression Molding for Micro-Structured Polymer Fresnel Lens Production

Dario Loaldi et al.

MICROMACHINES (2018)

Add to Collection

Review Materials Science, Multidisciplinary

Micro-nanostructured polymer surfaces using injection molding: A review

K. Maghsoudi et al.

MATERIALS TODAY COMMUNICATIONS (2017)

Add to Collection

Article Mechanics

Damage analysis of composite-aluminium adhesively-bonded single-lap joints

T. E. A. Ribeiro et al.

COMPOSITE STRUCTURES (2016)

Add to Collection

Article Engineering, Manufacturing

Moisture absorption of unidirectional hybrid composites

E. Barjasteh et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)

Add to Collection

Article Engineering, Industrial

Joining techniques for aluminium spaceframes used in automobiles Part II - adhesive bonding and mechanical fasteners

TA Barnes et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.