☆ 4.7 Article

Improving Glass Transition Temperature and Toughness of Epoxy Adhesives by a Complex Room-Temperature Curing System by Changing the Stoichiometry

POLYMERS (2023)

Related references

Note: Only part of the references are listed.

Article Nanoscience & Nanotechnology

Thermal degradation kinetics of epoxy resin modified with elastomeric nanoparticles

Mohammad Hossein Karami et al.

Summary: The research demonstrates that adding elastomeric nanoparticles to epoxy resin can increase the thermal degradation temperature and enhance the thermal stability of the nanocomposites. Various thermal degradation kinetic models were used to explain the thermal degradation process of the nanocomposites, showing that epoxy resin with 0.5 wt.% elastomeric nanoparticles exhibits a similar kinetic mechanism to the 1 wt.% nanocomposites.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2022)

Add to Collection

Article Polymer Science

Synthesis of a Curing Agent Derived from Limonene and the Study of Its Performance to Polymerize a Biobased Epoxy Resin Using the Epoxy/Thiol-Ene Photopolymerization Technique

Ricardo Acosta Ortiz et al.

Summary: This study describes the synthesis and application of a curing agent derived from limonene to prepare biobased thermoset polymers. The synthesized polymers showed high reactivity and potential applications in coatings.

POLYMERS (2022)

Add to Collection

Article Biochemistry & Molecular Biology

Effect of bio-based derived epoxy resin on interfacial adhesion of cellulose film and applicability towards natural jute fiber-reinforced composites

Bijender Kumar et al.

Summary: This study reports a bio-based epoxy resin and its application in the fabrication of VDE-DDM/TJF composites for fiber-reinforced materials. The results show that VDE-DDM resin exhibits superior adhesion to cellulose compared to other resins and demonstrates higher tensile strength and thermal stability. Furthermore, the VDE-DDM/TJF composites exhibit excellent flame retardancy.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2022)

Add to Collection

Article Engineering, Multidisciplinary

Superb electromagnetic shielding polymer nanocomposites filled with 3-dimensional p-phenylenediamine/aniline copolymer nanofibers@copper foam hybrid nanofillers

Feichong Yao et al.

Summary: This study successfully achieved the uniform distribution and three-dimensional network construction of nanofillers in polymer nanocomposites, resulting in high electrical conductivity, thermal conductivity, and electromagnetic interference shielding effectiveness. It also improved the mechanical properties of the composites, showcasing significant application potential.

COMPOSITES PART B-ENGINEERING (2022)

Add to Collection

Article Polymer Science

Synthesis, Curing Behaviors and Properties of a Bio-Based Trifunctional Epoxy Silicone Modified Epoxy Thermosets

Dan Qian et al.

Summary: In this study, a new silicone-modified trifunctional epoxy monomer SITEUP was synthesized and successfully improved the toughness of epoxy. The modified epoxy thermosets showed increased impact strength, flexural strength, thermal stability, and damping characteristics. In addition, SITEUP also improved the surface properties of epoxy materials.

POLYMERS (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Self-healing and polymer welding of soft and stiff epoxy thermosets via silanolates

Amelia A. Putnam-Neeb et al.

Summary: Incorporating dynamic bonds into polymers creates a new class of materials, covalent adaptable networks (CANs), which combine the reprocessability of thermoplastics with the bulk properties of fully crosslinked networks. These materials can be tuned for thermal and mechanical properties and have self-healing capabilities, making them sustainable alternatives to traditional thermosets.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2022)

Add to Collection

Review Polymer Science

Recent progress in bio-based eugenol resins: From synthetic strategies to structural properties and coating applications

Bijender Kumar et al.

Summary: This review article discusses the synthesis, properties, and applications of EU-based resins in coating applications, emphasizing their excellent performance and potential for development. Despite limited research, the interest in design strategies and properties of EU-based resins has been increasing due to their low cost and environmentally friendly characteristics.

JOURNAL OF APPLIED POLYMER SCIENCE (2022)

Add to Collection

Review Polymer Science

Recent Research Progress on Lignin-Derived Resins for Natural Fiber Composite Applications

Bijender Kumar et al.

Summary: Bio-based resins have gained interest due to environmental concerns and depletion of petroleum resources. Lignin, vanillin, and divanillin-based resins are particularly highlighted for their low cost, environmental benefits, thermal stability, mechanical properties, and suitability for high-performance natural fiber composite applications.

POLYMERS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

A high performance fully bio-based epoxy thermoset from a syringaldehyde-derived epoxy monomer cured by furan-derived amine

Hafezeh Nabipour et al.

Summary: The study focused on the development of a fully bio-based epoxy thermoset from syringaldehyde and furfurylamine, which exhibited high glass transition temperature, mechanical strength, intrinsic flame resistance, and antibacterial properties. This bio-based epoxy thermoset showed superior performance compared to petroleum-based epoxy thermosets, making it a promising green substitute for high performance applications in fire safety.

GREEN CHEMISTRY (2021)

Add to Collection

Article Construction & Building Technology

Effect of curing temperature conditions on glass transition temperature values of epoxy polymer used for wet lay-up applications

M. Michel et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Trace electrosprayed nanopolystyrene facilitated dispersion of multiwalled carbon nanotubes: Simultaneously strengthening and toughening epoxy

Hongbo Gu et al.

CARBON (2019)

Add to Collection

Article Polymer Science

Vanillin-Derived High-Performance Flame Retardant Epoxy Resins: Facile Synthesis and Properties

Sheng Wang et al.

MACROMOLECULES (2017)

Add to Collection

Article Polymer Science

Curing kinetics and mechanical properties of bio-based epoxy composites comprising lignin-bised epoxy resins

Fatemeh Ferdosian et al.

EUROPEAN POLYMER JOURNAL (2016)

Add to Collection

Article Polymer Science

Polymer Free Volume and Its Connection to the Glass Transition

Ronald P. White et al.

MACROMOLECULES (2016)

Add to Collection

Article Polymer Science

Sequential curing of off-stoichiometric thiol-epoxy thermosets with a custom-tailored structure

Xavier Fernandez-Francos et al.

POLYMER CHEMISTRY (2016)

Add to Collection

Review Materials Science, Multidisciplinary

An overview of multifunctional epoxy nanocomposites

Hongbo Gu et al.

JOURNAL OF MATERIALS CHEMISTRY C (2016)

Add to Collection

Review Chemistry, Multidisciplinary

Synthesis and application of epoxy resins: A review

Fan-Long Jin et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2015)

Add to Collection

Article Polymer Science

New catalysts for diglycidyl ether of bisphenol A curing based on thiol-epoxy click reaction

Dailyn Guzman et al.

EUROPEAN POLYMER JOURNAL (2014)

Add to Collection

Article Engineering, Chemical

Effect of Cure Temperature on the Glass Transition Temperature and Mechanical Properties of Epoxy Adhesives

R. J. C. Carbas et al.

JOURNAL OF ADHESION (2014)

Add to Collection

Article Polymer Science

Relationship between Glass Transition Temperature and Polymerization Temperature for Cross-Linked Photopolymers

Sheng Ye et al.

MACROMOLECULES (2011)

Add to Collection

Article Polymer Science

Influence of Chain Stiffness on Thermal and Mechanical Properties of Polymer Thin Films

Jessica M. Torres et al.

MACROMOLECULES (2011)

Add to Collection

Article Polymer Science

Crosslinking of mixtures of DGEBA with 1,6-dioxaspiro[4,4]nonan-2,7-dione initiated by tertiary amines. Part IV. Effect of hydroxyl groups on initiation and curing kinetics

Xavier Fernandez-Francos et al.

POLYMER (2010)

Add to Collection

Article Polymer Science

DSC studies of the curing mechanisms and kinetics of DGEBA using imidazole curing agents

SK Ooi et al.

POLYMER (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.