☆ 4.3 Article

Fast Pyrolysis of Cellulose and the Effect of a Catalyst on Product Distribution

INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH (2022)

Related references

Note: Only part of the references are listed.

Article Chemistry, Applied

Degradation of cellulose polymorphs into glucose by HCl gas with simultaneous suppression of oxidative discoloration

Yingfeng Wang et al.

Summary: In this study, pressurized HCl gas was used to efficiently hydrolyze different crystalline forms of cellulose, while suppression of harmful humin formation was achieved by adding chlorite. The cellulose I and II polymorphs yielded 50-70% glucose, and cellulose III and II showed >90% monosaccharide conversion. Purification of products from the gas-solid mixture was relatively easy, and the gaseous catalyst was easier to recycle than its aqueous counterpart. These results lay down the groundwork for practical solutions in cellulose hydrolysis, ensuring controlled side reactions, efficient conversion rates, and effortless recovery of products and reagents.

CARBOHYDRATE POLYMERS (2023)

Add to Collection

Article Agricultural Engineering

Catalytic deep eutectic solvent for levoglucosenone production by pyrolysis of cellulose

Shouya Saragai et al.

Summary: This work demonstrates that using deep eutectic solvents as catalysts in cellulose pyrolysis can enhance the selectivity and yield of levoglucosenone. The recovered DESs can be reused multiple times, offering potential for high productivity of levoglucosenone.

BIORESOURCE TECHNOLOGY (2022)

Add to Collection

Article Energy & Fuels

In situ evolution of functional groups in char during cellulose pyrolysis under the catalysis of KCl and CaCl2

Erwei Leng et al.

Summary: In this study, a combination of spectroscopic techniques was used to reveal the catalytic mechanism of KCl and CaCl2 on cellulose char evolution during slow pyrolysis, providing insights into the evolution of functional groups in pyrolysis char. The results of this research are significant for understanding biomass pyrolysis mechanism and industrial production of biochar.

FUEL (2022)

Add to Collection

Article Engineering, Environmental

A sustainable strategy for the production of 1,4:3,6-dianhydro-α-D-glucopyranose through oxalic acid-assisted fast pyrolysis of cellulose

Bin Hu et al.

Summary: Selective production of anhydrosugar DGP was achieved via oxalic acid-assisted fast pyrolysis of cellulose, with a yield 200 times higher than that from pure cellulose. Oxalic acid played a dual role as a reactant and a catalyst-like material, while the esterification with oxalic acid determined the selective generation of DGP. This novel strategy also showed potential for poly-generation of value-added chemicals, syngas, and char.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Energy & Fuels

Catalytic pyrolysis of cellulose and chitin with calcined dolomite - Pyrolysis kinetics and products analysis

Pu Wang et al.

Summary: The study found that calcined dolomite can reduce the activation energy of cellulose and chitin pyrolysis, promote biomass cracking, and improve the quality of products.

FUEL (2022)

Add to Collection

Article Energy & Fuels

High yield production of levoglucosan via catalytic pyrolysis of cellulose at low temperature

Liqun Jiang et al.

Summary: This study achieved high yields of levoglucosan (LG) from cellulose pyrolysis using acid-base bifunctional magnetic Zn-Fe-C catalysts. The tested catalyst Zn-4@Fe-C-500 increased LG yield by 5.4 times and lowered the reaction temperature by 200 C through acid-base site synergistic effect. Moreover, the LG yield from catalytic cellulose pyrolysis at 300 C was much higher than that without catalyst at 500 C. The Zn4@Fe-C500 catalyst exhibited high recyclability. This study demonstrated great potential for industrial production of LG from cellulose at low temperatures.

FUEL (2022)

Add to Collection

Article Chemistry, Applied

Catalytic pyrolysis of cellulose with sulfonated carbon catalyst to produce levoglucosenone

Haiping Yang et al.

Summary: A new method for the efficient preparation of levoglucosenone (LGO) using sulfonated carbon catalyst was proposed in this study. The results showed that the highest selectivity of LGO was achieved at 400 degrees C and a mass ratio of 1:1 for glucose/sulfonated carbon catalyst. Density functional theory calculations demonstrated that sulfonated carbon catalyst facilitated the formation of LGO by altering the reaction pathway.

FUEL PROCESSING TECHNOLOGY (2022)

Add to Collection

Article Chemistry, Analytical

Novel methodology for evaluation of cellulose pyrolysis kinetics implementing infrared spectroscopy in situ

Estefania Orrego-Restrepo et al.

Summary: This study proposes an in situ methodology based on infrared absorption spectra to evaluate the kinetics of cellulose pyrolysis and compare it with existing kinetic models.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2022)

Add to Collection

Article Chemistry, Analytical

Municipal sludge derived solid acids for levoglucosenone production via cellulose fast pyrolysis

Haoran Yuan et al.

Summary: A series of municipal sludge derived solid acids were developed for the production of levoglucosenone (LGO) via cellulose fast pyrolysis. The synthesized solid acids showed high selectivity for LGO formation and can be reused for multiple cycles without significant decline in performance.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2022)

Add to Collection

Article Chemistry, Applied

Catalytic pyrolysis of cellulose with sulfonated carbon catalyst to produce levoglucosenone

Haiping Yang et al.

Summary: The study found that under the catalytic action of sulfonated carbon, the optimal conditions for producing LGO were a temperature of 400 ℃ and a mass ratio of 1:1.

FUEL PROCESSING TECHNOLOGY (2022)

Add to Collection

Article Agricultural Engineering

Catalytic co-pyrolysis of corn stalk and polypropylene over Zn-Al modified MCM-41 catalysts for aromatic hydrocarbon-rich oil production

Tanglei Sun et al.

Summary: This study investigates the separate pyrolysis of corn stalk and polypropylene, as well as their co-pyrolysis over Zn-Al co-modified MCM-41 for the production of aromatics. The presence of Zn and Al in the catalyst significantly influences the product composition. The co-pyrolysis of CS and PP shows a synergistic effect on the production of aromatic hydrocarbons, with higher proportions of aromatics obtained under specific catalytic conditions.

INDUSTRIAL CROPS AND PRODUCTS (2021)

Add to Collection

Article Energy & Fuels

Catalytic pyrolysis of microcrystalline cellulose extracted from rice straw for high yield of hydrocarbon over alkali modified ZSM-5

Nishu et al.

Summary: This study investigated the pyrolysis behavior of microcrystalline cellulose extracted from rice straw, and the modification of ZSM-5 with different molar concentrations of NaOH solution. Results showed that alkali treatment promoted the production of aromatics and olefins, with changes in activation energy values.

FUEL (2021)

Add to Collection

Article Environmental Sciences

The effect of torrefaction and ZSM-5 catalyst for hydrocarbon rich bio-oil production from co-pyrolysis of cellulose and low density polyethylene via microwave-assisted heating

Quan Bu et al.

Summary: This study investigates the production of hydrocarbon rich bio-oil from the microwave co-pyrolysis of cellulose and LDPE using microwave torrefaction and ZSM-5 catalyst. Results showed that MTC catalytic co-pyrolysis led to the highest hydrocarbons content and the highest aromatic hydrocarbons content. The activation energy for co-pyrolysis and MTC catalytic co-pyrolysis was significantly reduced, demonstrating a synergistic effect during the process.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

Add to Collection

Article Agricultural Engineering

Catalytic fast pyrolysis of cellulose for selective production of 1-hydrox-y-3,6-dioxabicyclo[3.2.1]octan-2-one using nickel -tin layered double oxides

Yang Li et al.

Summary: Novel NiSn-LDO catalysts were developed for the selective production of LAC via in-situ CFP of cellulose. The yield of LAC was found to be sensitive to reaction conditions, with NiSn-LDO identified as the most effective catalyst. The maximal LAC yield reached 9.11 wt% over the optimal conditions of 320 degrees C, Ni/Sn molar ratio of 2/1, and CA-to-CL ratio of 1/1, showing over 5 times increase compared to non-catalytic process.

INDUSTRIAL CROPS AND PRODUCTS (2021)

Add to Collection

Article Chemistry, Analytical

Influence of ionic liquid type on porous carbon formation during the ionothermal pyrolysis of cellulose

Xin Huang et al.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Unveiling the pyrolysis mechanisms of cellulose: Experimental and theoretical studies

Xiaoxiao Yang et al.

RENEWABLE ENERGY (2020)

Add to Collection

Article Agricultural Engineering

Fast corn stalk pyrolysis and the influence of catalysts on product distribution

Tanglei Sun et al.

BIORESOURCE TECHNOLOGY (2020)

Add to Collection

Article Energy & Fuels

Differences in soot produced from rapid pyrolysis of xylan, cellulose and lignin under pulverized-fuel conditions

Changya Deng et al.

FUEL (2020)

Add to Collection

Article Chemistry, Applied

Insight into the formation mechanism of levoglucosenone in phosphoric acid-catalyzed fast pyrolysis of cellulose

Bin Hu et al.

JOURNAL OF ENERGY CHEMISTRY (2020)

Add to Collection

Article Agricultural Engineering

Selective preparation of 1-hydroxy-3,6-dioxabicyclo[3.2.1]octan-2-one by fast pyrolysis of cellulose catalyzed with metal-loaded nitrided HZSM-5

Zhen-xi Zhang et al.

BIORESOURCE TECHNOLOGY (2020)

Add to Collection

Article Agricultural Engineering

Impact of ball-milling and ionic liquid pretreatments on pyrolysis kinetics and behaviors of crystalline cellulose

Li-qun Jiang et al.

BIORESOURCE TECHNOLOGY (2020)

Add to Collection

Article Chemistry, Applied

Catalytic fast pyrolysis of cellulose over Ce0.8Zr0.2-xAlxO2 catalysts to produce aromatic hydrocarbons: Analytical Py-GC x GC/MS

Wenbin Li et al.

FUEL PROCESSING TECHNOLOGY (2020)

Add to Collection

Article Engineering, Environmental

Enhancement of photocatalytic potential and recoverability of Fe3O4 nanoparticles by decorating over monoclinic zirconia

Idrees Khan et al.

JOURNAL OF ENVIRONMENTAL HEALTH SCIENCE AND ENGINEERING (2020)

Add to Collection

Article Agricultural Engineering

Online photoionization mass spectrometric evaluation of catalytic co-pyrolysis of cellulose and polyethylene over HZSM-5

Zhongyue Zhou et al.

BIORESOURCE TECHNOLOGY (2019)

Add to Collection

Article Chemistry, Analytical

Study on catalytic pyrolysis of eucalyptus to produce aromatic hydrocarbons by Zn-Fe co-modified HZSM-5 catalysts

Jiachen Xu et al.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2019)

Add to Collection

Article Energy & Fuels

Effect of volatiles interaction during pyrolysis of cellulose, hemicellulose, and lignin at different temperatures

Yingquan Chen et al.

FUEL (2019)

Add to Collection

Article Energy & Fuels

Effects of KCl and CaCl2 on the evolution of anhydro sugars in reaction intermediates during cellulose fast pyrolysis

Erwei Leng et al.

FUEL (2019)

Add to Collection

Article Green & Sustainable Science & Technology

Products distribution and generation pathway of cellulose pyrolysis

Limei Chen et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Add to Collection

Article Thermodynamics

Initial pyrolysis mechanism of cellulose revealed by in-situ DRIFT analysis and theoretical calculation

Gongxin Dai et al.

COMBUSTION AND FLAME (2019)

Add to Collection

Article Chemistry, Applied

Enhancing and upgrading bio-oil during catalytic pyrolysis of cellulose: The synergistic effect of potassium cation and different anions impregnation

Xichao Fu et al.

FUEL PROCESSING TECHNOLOGY (2019)

Add to Collection

Article Energy & Fuels

Preparation of furfural by catalytic pyrolysis of cellulose based on nano Na/Fe-solid acid

Xiaowei Bai et al.

FUEL (2019)

Add to Collection

Article Chemistry, Analytical

Catalytic fast pyrolysis of cellulose for increasing contents of furans and aromatics in biofuel production

Wenliang Wang et al.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2018)

Add to Collection

Article Environmental Sciences

Catalytic co-pyrolysis of cellulose and polypropylene over all-silica mesoporous catalyst MCM-41 and Al-MCM-41

Yongchao Chi et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2018)

Add to Collection

Article Thermodynamics

Mechanism of cellulose fast pyrolysis: The role of characteristic chain ends and dehydrated units

Qiang Lu et al.

COMBUSTION AND FLAME (2018)

Add to Collection

Article Thermodynamics

Catalytic fast co-pyrolysis of bamboo residual and waste lubricating oil over an ex-situ dual catalytic beds of MgO and HZSM-5: Analytical PY-GC/MS study

Jia Wang et al.

ENERGY CONVERSION AND MANAGEMENT (2017)

Add to Collection

Article Thermodynamics

Catalytic co-pyrolysis of torrefied yellow poplar and high-density polyethylene using microporous HZSM-5 and mesoporous Al-MCM-41 catalysts

Young-Min Kim et al.

ENERGY CONVERSION AND MANAGEMENT (2017)

Add to Collection

© Peeref 2019-2024. All rights reserved.