☆ 4.7 Article

Construction of Rainbow-like Structural Color Coatings on Wood Surfaces Based on Polystyrene Microspheres

FORESTS (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Paper & Wood

STUDY ON THERMAL COMFORT OF WOOD TABLETOP MATERIALS

Bai Jue et al.

Summary: The purpose of this study is to investigate the contact temperature and thermal comfort when the upper extremity touches a wooden table top, and to seek an efficient accurate simulation device instead of human testing. The results show that the ambient temperature, type and thickness of material all have significant effects on the local contact temperature. The simulation device in the study is not only simple to operate, but also can continuously and stably replace the heat transfer process of the upper limb.

WOOD RESEARCH (2022)

Add to Collection

Article Engineering, Chemical

The reinforcing effect of lignin-containing cellulose nanofibrils in the methacrylate composites produced by stereolithography

Xinhao Feng et al.

Summary: Lignin-containing cellulose nanofibrils (L-CNF) were used to reinforce 3D printed methacrylate (MA) resin, and the reinforcing mechanism was investigated. The addition of L-CNF significantly improved the mechanical and thermal properties of the 3D printed composites due to its surfacial-coated lignin and high aspect ratio, increasing the mechanical interaction between L-CNF and MA matrix.

POLYMER ENGINEERING AND SCIENCE (2022)

Add to Collection

Article Forestry

Numerical and theoretical analysis of the contact force of oval mortise and tenon joints concerning outdoor wooden furniture structure

Wei-Lian Fu et al.

Summary: This study investigated the contact force of oval mortise and tenon joints to better understand the mechanical mechanism of outdoor wooden furniture structure. Experimental and numerical simulation methods were used to study the effects of moisture content, interference fit, and grain direction on contact force, and a theoretical model was proposed to predict contact force.

WOOD SCIENCE AND TECHNOLOGY (2022)

Add to Collection

Article Polymer Science

Effects of Adding Methods of Fluorane Microcapsules and Shellac Resin Microcapsules on the Preparation and Properties of Bifunctional Waterborne Coatings for Basswood

Lin Wang et al.

Summary: In this paper, urea-formaldehyde resin microcapsules with shellac resin as core material were prepared and their application in waterborne coatings was studied. The results showed that the coating with 10.0% fluorane microcapsules and 5.0% shellac resin microcapsules exhibited better performance and had thermochromic and self-healing functions.

POLYMERS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of the Addition of Shellac Self-Healing and Discoloration Microcapsules on the Performance of Coatings Applied on Ebiara Solid Board

Yanzhao Qin et al.

Summary: The study found that adding self-made shellac microcapsules and discoloration microcapsules did not significantly affect the hardness of the coating, but it was able to reduce the surface roughness. The optimum comprehensive performance was achieved by adding 15.0% shellac microcapsules in primer and 20.0% discoloration microcapsules in topcoat.

COATINGS (2022)

Add to Collection

Review Materials Science, Paper & Wood

A Review on Carbon Reduction Analysis during the Design and Manufacture of Solid Wood Furniture

Xinghuan Wu et al.

Summary: Solid wood furniture production process has high carbon reduction potential, focusing on efficient use of primary materials, reduction of auxiliary materials, and optimization of processing techniques. Future applications of feasible carbon reduction technologies in design and manufacturing can promote low-carbon development in the wood furniture industry.

BIORESOURCES (2021)

Add to Collection

Article Polymer Science

A novel waterborne polyurethane coating modified by highly dispersed nano-boron carbide particles

Yingchun Sun et al.

Summary: In this study, waterborne polyurethane coatings were modified by adding nano-boron carbide particles and treating them with polyethylene glycol or polypropylene glycol to achieve proper dispersion and increase chemical interactions. The results showed that PEG6000 enhanced the interaction between nano-B4C and WPU, improving the physical performance of the coatings. A coating with 15 wt% nano-B4C addition exhibited the best performance in terms of abrasion and hardness, attributed to the uniform dispersion of nano-B4C particles in PEG6000 solution.

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

Add to Collection

Article Chemistry, Applied

Microbial dyeing-infection behavior and influence of Lasiodiplodia theobromae in poplar veneer

Yuansong Liu et al.

DYES AND PIGMENTS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Influence of temperature on optical spectra of SbSI photonic crystals

Anna Starczewska et al.

OPTICAL MATERIALS (2020)

Add to Collection

Article Forestry

Effects of two-year weather exposure on thermally modified picea abies, pinus sylvestris, and fraxinus excelsior wood

Chenyang Cai et al.

CANADIAN JOURNAL OF FOREST RESEARCH (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Fabrication of Coatings with Structural Color on a Wood Surface

Yi Liu et al.

COATINGS (2020)

Add to Collection

Article Materials Science, Ceramics

Gas adsorption behavior of silica photonic crystals with different size of initial particles

Juan Xie et al.

JOURNAL OF THE CERAMIC SOCIETY OF JAPAN (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Bandgap engineering of TiO2 nanotube photonic crystals for enhancement of photocatalytic capability

Jian-Feng Li et al.

CRYSTENGCOMM (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Bioinspired Stimuli-Responsive Color-Changing Systems

Golnaz Isapour et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Multidisciplinary Sciences

Light-induced dynamic structural color by intracellular 3D photonic crystals in brown algae

Martin Lopez-Garcia et al.

SCIENCE ADVANCES (2018)

Add to Collection

Article Multidisciplinary Sciences

Full-Color Biomimetic Photonic Materials with Iridescent and Non-Iridescent Structural Colors

Ayaka Kawamura et al.

SCIENTIFIC REPORTS (2016)

Add to Collection

Article Chemistry, Physical

Surface photo-discoloration and degradation of dyed wood veneer exposed to different wavelengths of artificial light

Yi Liu et al.

APPLIED SURFACE SCIENCE (2015)

Add to Collection

Article Chemistry, Applied

Simple fabrication of colloidal crystal structural color films with good mechanical stability and high hydrophobicity

Yao Meng et al.

DYES AND PIGMENTS (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Optical properties of three-dimensional P(St-MAA) photonic crystals on polyester fabrics

Guojin Liu et al.

OPTICAL MATERIALS (2015)

Add to Collection

Review Chemistry, Multidisciplinary

Current status and future developments in preparation and application of colloidal crystals

Hailin Cong et al.

CHEMICAL SOCIETY REVIEWS (2013)

Add to Collection

Article Chemistry, Physical

Fabrication and optical properties of silica shell photonic crystals

Qingsong Jiang et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2012)

Add to Collection

Article Polymer Science

Self-assembly of binary particles and application as structural colors

Zhehong Shen et al.

POLYMER CHEMISTRY (2012)

Add to Collection

Review Optics

Fabrication of three-dimensional photonic crystals in quantum-dot-based materials

Min Gu et al.

LASER & PHOTONICS REVIEWS (2010)

Add to Collection

Article Polymer Science

Synthesis of Monodisperse Styrene/Methyl Methacrylate/Acrylic Acid Latex Using Surfactant-Free Emulsion Copolymerization in Air

Shengmiao Zhang et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2009)

Add to Collection

Article Chemistry, Physical

Characterization of colloidal crystal film of polystyrene particles at the air-suspension interface

Yoshiro Imura et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2009)

Add to Collection

Article Chemistry, Physical

Facile fabrication of a three-dimensional colloidal crystal film with large-area and robust mechanical properties

Bo You et al.

JOURNAL OF MATERIALS CHEMISTRY (2009)

Add to Collection

Article Chemistry, Multidisciplinary

Magnetochromatic Microspheres: Rotating Photonic Crystals

Jianping Ge et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)

Add to Collection

Review Physics, Multidisciplinary

Physics of structural colors

S. Kinoshita et al.

REPORTS ON PROGRESS IN PHYSICS (2008)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Opal and inverse opal photonic crystals: Fabrication and characterization

Geoffrey I. N. Waterhouse et al.

POLYHEDRON (2007)

Add to Collection

Review Chemistry, Multidisciplinary

Introducing defects in 3D photonic crystals:: State of the art

Paul V. Braun et al.

ADVANCED MATERIALS (2006)

Add to Collection

Review Polymer Science

Emulsion polymerization mechanisms and kinetics

C. S. Chern

PROGRESS IN POLYMER SCIENCE (2006)

Add to Collection

Article Chemistry, Multidisciplinary

Synthesis of quantum dot-tagged submicrometer polystyrene particles by miniemulsion polymerization

N Joumaa et al.

LANGMUIR (2006)

Add to Collection

Article Biology

Blue integumentary structural colours in dragonflies (Odonata) are not produced by incoherent Tyndall scattering

RO Prum et al.

JOURNAL OF EXPERIMENTAL BIOLOGY (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.