Waste-Coffee-Derived Activated Carbon as Efficient Adsorbent for Water Treatment

Activated carbon prepared from waste coffee was utilized as a potential low-cost adsorbent to remove Rhodamine B from aqueous solution. A series of physical characterizations verify that the obtained activated carbon possesses a layered and ordered hexagonal structure with a wrinkled and rough surface. In addition, high specific surface area, appropriate pore distribution, and desired surface functional groups are revealed, which promote the adsorption properties. Various adsorption experiments were conducted to investigate the effect on the absorption capacity (e.g., of initial dye concentration, temperature and solution pH) of the material. The results showed that the waste-coffee-derived activated carbon with a large surface area of approximately 952.7 m(2) g(-1) showed a maximum uptake capacity of 83.4 mg g(-1) at the pH of 7 with the initial dye concentration of 100 mg L-1 under 50 degrees C. The higher adsorption capacity can be attributed to the strong electrostatic attraction between the negatively charged functional groups in activated carbon and the positively charged functional groups in RB. The kinetic data and the corresponding kinetic parameters were simulated to evaluate the mechanism of the adsorption process, which can fit well with the highest R-2. The adsorption results confirmed the promising potential of the as-prepared waste-coffee-derived activated carbon as a dye adsorbent.

Automated summary

This study utilized activated carbon prepared from waste coffee as a low-cost adsorbent to remove Rhodamine B from aqueous solution. The waste coffee-derived activated carbon showed a layered and ordered hexagonal structure with a wrinkled and rough surface. It had a high specific surface area, appropriate pore distribution, and desired surface functional groups, which enhanced its adsorption properties.