Creep Behavior of A356 Aluminum Alloy Reinforced with Multi-Walled Carbon Nanotubes by Stir Casting

Lightweight aluminum alloy components are often used to manufacture a variety of engineering components in many industries. In recent years, researchers have studied the effect of improving the mechanical properties of metal alloys by incorporating nano-carbon into its structure. In this study, the effect of the addition of 0.2, 0.5, and 1 wt% of multi-walled carbon nanotubes (MWCNTs) on the stress-strain behavior and creep phenomenon of an A356 aluminum alloy were studied. The effect of nickel coating on 0.2 wt% MWCNTs was also investigated. Samples were prepared using the stir-casting method. The results revealed that the grain size became finer when MWCNT nano-particulates were introduced. Although the MWCNTs were distributed homogeneously in the A356 matrix, as confirmed by FESEM analysis, there were some agglomerations observed in a specific area with dimensions smaller than 100 nm. Nevertheless, the addition of MWCNTs was found to be beneficial in enhancing the hardness of alloys containing 0.2 wt%, 0.2 wt% nickel-coated, 0.5 wt%, and 1 wt% MWCNTs by 9%, 24%, 32%, and 15%, respectively, as compared with the unreinforced A345 matrix. It was also found that the 0.5 wt% MWCNT-A356 matrix exhibited an improvement in the creep lifetime by more than two orders of magnitude.

Automated summary

The effect of adding multi-walled carbon nanotubes (MWCNTs) to an A356 aluminum alloy was studied in this research, and it was found that the addition of MWCNTs can improve the hardness and creep lifetime of the alloy.