4.6 Article

Nano-Confined Tin Oxide in Carbon Nanotube Electrodes via Electrostatic Spray Deposition for Lithium-Ion Batteries

Related references

Note: Only part of the references are listed.
Article Materials Science, Ceramics

Synthesis and flash sintering of zirconium nitride powder

Suprabha Das et al.

Summary: This study successfully synthesized ZrN powder via a urea route and sintered it into near fully dense single-phase ceramics using a flash sintering setup. The effects of processing parameters on the synthesis method were investigated.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2022)

Article Chemistry, Physical

Electrical, thermal, and H2O and CO2 poisoning behaviors of PrNi0.5Co0.5O3-d electrode for intermediate temperature protonic ceramic electrochemical cells

Md Shariful Islam Sozal et al.

Summary: PNC exhibits good electrical conductivity and stability at high temperatures, but it shows significant poisoning from H2O and CO2 in symmetric cells with the specific electrolyte BZCYYb4411. In contrast, PNC does not suffer from H2O and CO2 poisoning in symmetric cells with GDC electrolyte.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

Article Chemistry, Physical

Defects investigation of bipolar exfoliated phosphorene nanosheets

Amin Rabiei Baboukani et al.

Summary: This paper investigates the defects and amorphization phenomenon in exfoliated phosphorene nanosheets through HRTEM imaging and density functional theory calculations. The results show the presence of single vacancies, di-vacancies, ad-atoms, and grain boundary defects in the phosphorene nanosheets, and amorphization occurs in the presence of oxygen. This study is of great importance for both fundamental research and technological applications.

SURFACE SCIENCE (2022)

Article Materials Science, Multidisciplinary

Tribological and neutron radiation properties of boron nitride nanotubes reinforced titanium composites under lunar environment

Nicole Bacca et al.

Summary: This study reports the tribological behavior and radiation shielding performance of a boron nitride nanotube (BNNT) reinforced titanium metal matrix composite (MMC) for lunar exploration. The results show improved wear resistance and radiation attenuation of the BNNT-Ti MMC compared to pristine Ti samples.

JOURNAL OF MATERIALS RESEARCH (2022)

Article Biochemistry & Molecular Biology

Wearable Capacitive Pressure Sensor for Contact and Non-Contact Sensing and Pulse Waveform Monitoring

Azmal Huda Chowdhury et al.

Summary: This paper reports a low-cost and high-sensitivity pressure sensor method using a porous PDMS polymer and MWCNT composite dielectric layer. The sensor exhibits high sensitivity and low limit of detection, and demonstrates excellent stability under cyclic loading. The sensor is suitable for various applications such as tactile sensing and non-contact sensing.

MOLECULES (2022)

Article Engineering, Chemical

Lithiophilicity: The key to efficient lithium metal anodes for lithium batteries

Yahao Li et al.

Journal of Energy Chemistry (2022)

Article Materials Science, Multidisciplinary

Designing carbon anodes for advanced potassium-ion batteries: Materials, modifications, and mechanisms

Xuehui Wang et al.

Summary: This article summarizes the latest research achievements of different types of carbon anodes for potassium-ion batteries (KIBs) and explores the key factors affecting their electrochemical performance. Alternative strategies for addressing the low capacity and efficiency of carbon materials are emphasized, and the development direction of KIBs is proposed.

ADVANCED POWDER MATERIALS (2022)

Article Electrochemistry

Electrochemical stability analysis of red phosphorus-based anode for lithium-ion batteries

Anis Allagui et al.

Summary: The RP-SPAN composite material shows promise for lithium-ion battery applications, but the stability analysis of its dynamic response has not been investigated. The system was found to be highly nonlinear and time-variant at low frequencies, matching the 0.21% average capacity loss per cycle observed in experiments.

ELECTROCHIMICA ACTA (2021)

Article Materials Science, Multidisciplinary

In situ formed three-dimensional (3D) lithium-boron (Li-B) alloy as a potential anode for next-generation lithium batteries

Hai-Feng Huang et al.

Summary: This study demonstrated the use of in situ formed three-dimensional lithium-boron alloy as an excellent alternative to lithium metal, with the potential to improve battery performance by adjusting the boron content. The Li-B alloy with the lowest boron content showed the lowest interface resistance, while the 15LiB alloy exhibited the best cycling performance.

RARE METALS (2021)

Review Chemistry, Multidisciplinary

An Overview on Anodes for Magnesium Batteries: Challenges towards a Promising Storage Solution for Renewables

Federico Bella et al.

Summary: Magnesium-based batteries have gained attention due to their high theoretical volumetric capacity, abundance, and dendrite-free behavior. However, the formation of insulating passivation layers with Mg deposition and dissolution in polar organic electrolytes presents a challenge that requires specific strategies to overcome.

NANOMATERIALS (2021)

Review Chemistry, Physical

Liquid-Based Exfoliation of Black Phosphorus into Phosphorene and Its Application for Energy Storage Devices

Amin Rabiei Baboukani et al.

Summary: Black phosphorus, a rising star among 2D materials, has attracted attention for a wide range of applications due to its fascinating properties; the key challenge lies in the production of high-quality nanosheets for practical applications and energy storage; significant progress has been made in liquid-based exfoliation techniques and phosphorene-based electrode applications, but there are still challenges and opportunities in terms of exfoliation and energy storage applications for phosphorene.

SMALL STRUCTURES (2021)

Article Chemistry, Inorganic & Nuclear

Nano Tin/Tin Oxide Attached onto Graphene Oxide Skeleton as a Fluorine Free Anode Material for Lithium-Ion Batteries

Andrzej P. Nowak et al.

INORGANIC CHEMISTRY (2020)

Editorial Material Multidisciplinary Sciences

A retrospective on lithium-ion batteries

Jing Xie et al.

NATURE COMMUNICATIONS (2020)

Proceedings Paper Engineering, Electrical & Electronic

A Facile Fabrication of Porous and Breathable Dielectric Film for Capacitive Pressure Sensor

Azmal Huda Chowdhury et al.

2020 IEEE SENSORS (2020)

Article Electrochemistry

Poly(Ionic Liquid)-Based Composite Gel Electrolyte for Lithium Batteries

Meer Safa et al.

CHEMELECTROCHEM (2019)

Review Chemistry, Multidisciplinary

Tin Oxide Based Nanomaterials and Their Application as Anodes in Lithium-Ion Batteries and Beyond

Florian Zoller et al.

CHEMSUSCHEM (2019)

Article Multidisciplinary Sciences

Caging tin oxide in three-dimensional graphene networks for superior volumetric lithium storage

Junwei Han et al.

NATURE COMMUNICATIONS (2018)

Article Nanoscience & Nanotechnology

Low Interface Energies Tune the Electrochemical Reversibility of Tin Oxide Composite Nanoframes as Lithium-Ion Battery Anodes

Lei Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Article Materials Science, Multidisciplinary

Electrostatically Sprayed Reduced Graphene Oxide-Carbon Nanotubes Electrodes for Lithium-Ion Capacitors

Ebenezer Adelowo et al.

C-JOURNAL OF CARBON RESEARCH (2018)

Article Chemistry, Physical

SnO2/polypyrrole hollow spheres with improved cycle stability as lithium-ion battery anodes

Jujun Yuan et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Article Chemistry, Multidisciplinary

3D Porous Cu Current Collector/Li-Metal Composite Anode for Stable Lithium-Metal Batteries

Qi Li et al.

ADVANCED FUNCTIONAL MATERIALS (2017)

Article Chemistry, Physical

A metal foam as a current collector for high power and high capacity lithium iron phosphate batteries

Gui Fu Yang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2014)

Article Chemistry, Multidisciplinary

Hybrid of Co3Sn2@Co Nanoparticles and Nitrogen-Doped Graphene as a Lithium Ion Battery Anode

Nasir Mahmood et al.

ACS NANO (2013)

Review Chemistry, Multidisciplinary

SnO2-Based Nanomaterials: Synthesis and Application in Lithium-Ion Batteries

Jun Song Chen et al.

SMALL (2013)

Article Chemistry, Multidisciplinary

Fabrication and Characterization of SnO2/Graphene Composites as High Capacity Anodes for Li-Ion Batteries

Abirami Dhanabalan et al.

NANOMATERIALS (2013)

Article Chemistry, Multidisciplinary

Improving the Electrode Performance of Ge through Ge@C Core-Shell Nanoparticles and Graphene Networks

Ding-Jiang Xue et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2012)

Article Chemistry, Multidisciplinary

Nanostructured metal oxide-based materials as advanced anodes for lithium-ion batteries

Hao Bin Wu et al.

NANOSCALE (2012)

Article Chemistry, Physical

Design and tailoring of a hierarchical graphene-carbon nanotube architecture for supercapacitors

Shin-Yi Yang et al.

JOURNAL OF MATERIALS CHEMISTRY (2011)

Article Chemistry, Multidisciplinary

Enhanced capacitance of manganese oxide via confinement inside carbon nanotubes

Wei Chen et al.

CHEMICAL COMMUNICATIONS (2010)

Article Chemistry, Physical

X-ray diffraction characterization on the alignment degree of carbon nanotubes

AY Cao et al.

CHEMICAL PHYSICS LETTERS (2001)