☆ 4.6 Review

Attaining High Functional Performance in Biodegradable Mg-Alloys: An Overview of Challenges and Prospects for the Mg-Zn-Ca System

MATERIALS (2023)

Related references

Note: Only part of the references are listed.
Article Metallurgy & Metallurgical Engineering

The corrosion characteristics and mechanism of directionally solidified Mg-3Zn-xCa alloys

Yi Zhang et al.

Summary: This study investigates the corrosion characteristics and mechanism of directionally solidified Mg-3Zn-xCa alloys in NaCl solution. The corrosion rate of the alloys increases with the addition of Ca, and the corrosion resistance is influenced by the corrosion products film (CPF) and secondary phases. The presence of ZnO enhances the corrosion resistance of the Mg-3Zn alloy. Ca-containing alloys can form a protective CPF on the surface. The corrosion rate is dominated by the volume fraction of the secondary phases.

JOURNAL OF MAGNESIUM AND ALLOYS (2023)

Add to Collection
Article Engineering, Mechanical

Stress corrosion cracking behavior of AZ80 magnesium alloy with different orientations in simulated body fluid

Ying Xiong et al.

Summary: In this study, the stress corrosion behavior of AZ80 magnesium alloy specimens with different orientations was investigated using SSRT testing and EIS analysis. The results showed that AZ80 magnesium alloy with different initial textures exhibited different corrosion mechanisms in simulated body fluid.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2023)

Add to Collection
Article Materials Science, Multidisciplinary

Structure, cytocompatibility and biodegradation of nanocrystalline coated Mg-Ca-Zn alloys

Gulsharat Baigonakova et al.

Summary: This study demonstrates the use of TiN coating to improve the biocorrosion resistance and cytocompatibility of Mg-Ca-Zn alloy. The coating effectively protects against corrosion for up to 4 weeks without any shape loss or mass reduction. The high cell viability and compatibility of the TiN layer are also observed.

VACUUM (2023)

Add to Collection
Article Materials Science, Multidisciplinary

Segregation-driven exceptional twin-boundary strengthening in lean Mg-Zn-Ca alloys

I Basu et al.

Summary: Twinning-mediated plasticity in hexagonal close-packed crystal structures offers great potential for achieving lean Mg-based alloys with high strength and extended ductility. The effects of Zn and Ca solutes on micropillar deformation and the response of pre-existing twin boundaries to applied stress were assessed. In the presence of Zn and Ca solutes, the micropillars exhibited enhanced strength and ductility due to the periodic segregation of solutes at the twin boundaries. In contrast, pure Mg micropillars showed massive twin growth and basal slip, leading to earlier failure.

ACTA MATERIALIA (2022)

Add to Collection
Article Materials Science, Ceramics

Microstructure, corrosion resistance, and antibacterial properties of an Ag/Mg-Al layered double hydroxide coating synthesized in situ on biomedical Mg-Zn-Ca alloy

Yangping Chen et al.

Summary: A one-step hydrothermal treatment was used to deposit a nano silver-loaded magnesium-aluminum hydrotalcite coating on the surface of a Mg-Zn-Ca alloy, improving corrosion resistance and antibacterial properties. Optimizing preparation conditions resulted in smaller silver particles, reduced corrosion rate, and excellent antibacterial and biocompatibility performance.

CERAMICS INTERNATIONAL (2022)

Add to Collection
Article Chemistry, Physical

Simulation-aided analysis on mechanical properties of dilute Mg-Zn-Ca alloy sheets

Yusuke Matsuoka et al.

Summary: The relationship between Zn content and room temperature mechanical properties of dilute Mg-xZn-0.1Ca alloy sheets was investigated. Increasing the Zn content resulted in a significant improvement in the formability. The relative activity of deformation modes did not show apparent differences between different Zn contents. The appearance of tilted basal poles and the development of TD-split texture contributed to the enhanced formability. The efficient scheme for parameter fitting required for VPSC simulation was proposed.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection
Article Chemistry, Physical

Anisotropic mechanical and corrosion properties of directionally solidified Mg-3Zn-0.2Ca alloy

Yi Zhang et al.

Summary: The Mg-3Zn-0.2Ca alloy fabricated by directional solidification exhibited highly anisotropic mechanical and corrosion properties. The anisotropy in mechanical properties was attributed to the activation of different deformation mechanisms, while the anisotropic elastic modulus was due to the difference in atomic bonding strengths at different crystallographic planes. Additionally, the corrosion resistance of the alloy also showed anisotropy, with the specimen taken along LD direction showing superior resistance.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection
Article Nanoscience & Nanotechnology

Enhanced strength-ductility synergy achieved through twin boundary pinning in a bake-hardened Mg-2Zn-0.5Ca alloy

Yi-Jia Li et al.

Summary: The study discovered that twin boundary pinning is a new hardening mechanism in Mg-2Zn-0.5Ca alloy during bake-hardening, enhancing the strength-ductility synergy. The co-segregation of Zn and Ca atoms at twin boundaries effectively suppresses crack propagation, improving the material's ductility.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

Add to Collection
Article Nanoscience & Nanotechnology

Role of homogenization on tensile properties and microstructures in a dilute Mg-Zn-Ca-Mn alloy sheet

T. Nakata et al.

Summary: The effect of homogenization on microstructures and tensile properties in a dilute Mg-Zn-Ca-Mn alloy sheet was investigated. High-temperature homogenization dissolved eutectic intermetallic phases before rolling, but led to significant growth of alpha Mn precipitates and coarse grain structure after rolling and annealing. Rolling without homogenization or after low-temperature homogenization resulted in increased fraction of intermetallic phases, but achieved a fine grain structure due to dispersed alpha Mn precipitates.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

Add to Collection
Article Engineering, Multidisciplinary

Achieving high strength above 400 MPa in conventionally extruded Mg-Ca-Zn ternary alloys

Du Sen et al.

Summary: This study investigates the effect of Zn content on the microstructure and mechanical properties of Mg-Ca based alloys. It is found that increasing the Zn concentration leads to an increase in yield strength, which is attributed to grain refinement, the formation of nano-phases, the presence of lamellae structures, and a decrease in recrystallization. Higher Zn content results in the formation of nano-phases with higher thermal stability, leading to finer grain size and higher yield strength.

SCIENCE CHINA-TECHNOLOGICAL SCIENCES (2022)

Add to Collection
Article Chemistry, Physical

On the Corrosion Fatigue of Magnesium Alloys Aimed at Biomedical Applications: New Insights from the Influence of Testing Frequency and Surface Modification of the Alloy ZK60

Mikhail Linderov et al.

Summary: Magnesium alloys, especially in medical applications, face challenges due to their poor resistance to environmentally assisted fracture and bio-corrosion degradation. This study focuses on the corrosion fatigue behavior of a popular Mg-Zn-Zr alloy, specifically examining the effects of testing frequency, surface roughness, and metallic coatings. The results demonstrate that the occurrence of corrosion fatigue in Mg alloys is influenced by multiple factors, showing a complicated interplay between corrosion damage, stress corrosion cracking, and cyclic loads.

MATERIALS (2022)

Add to Collection
Article Materials Science, Multidisciplinary

Study of the Effect of Diamond Nanoparticles on the Structure and Mechanical Properties of the Medical Mg-Ca-Zn Magnesium Alloy

Anton P. Khrustalyov et al.

Summary: This paper addresses the production and investigation of Mg-Ca-Zn alloy dispersion-hardened by diamond nanoparticles. The structural studies have shown that diamond nanoparticles have a modifying effect and can reduce the grain size of the magnesium alloy, resulting in improved mechanical properties.

METALS (2022)

Add to Collection
Article Materials Science, Multidisciplinary

Preparing a Bioactive (Chitosan/Sodium Hyaluronate)/SrHA Coating on Mg-Zn-Ca Alloy for Orthopedic Implant Applications

Yashan Feng et al.

Summary: This study aimed to produce a multifunctional coating on magnesium-based alloys that have improved corrosion resistance, bioactivity, and antibacterial properties. The results showed that the coatings exhibited superior corrosion resistance, promoted cell adhesion and proliferation, and had strong bactericidal effects.

FRONTIERS IN MATERIALS (2022)

Add to Collection
Review Metallurgy & Metallurgical Engineering

Effect of crystallographic texture and twinning on the corrosion behavior of Mg alloys: A review

Ehsan Gerashi et al.

Summary: Magnesium and its alloys are lightweight and potential bioresorbable materials, but their corrosion resistance is poor. This review summarizes the effects of crystallographic texture and twinning on the corrosion behavior of magnesium and its alloys, revealing contradictory results.

JOURNAL OF MAGNESIUM AND ALLOYS (2022)

Add to Collection
Article Engineering, Biomedical

Implant degradation of low-alloyed Mg-Zn-Ca in osteoporotic, old and juvenile rats

Nicole G. Sommer et al.

Summary: This study investigated the osseointegration and implant degradation of a magnesium-zinc-calcium implant in an ovariectomy-induced osteoporotic rat model. The results showed enhanced implant degradation and sclerotic rim formation in the osteoporotic rats compared to the healthy rats. This study highlights the importance of considering different bone conditions in the development of biodegradable implants.

ACTA BIOMATERIALIA (2022)

Add to Collection
Article Critical Care Medicine

Can Hardware Removal be Avoided Using Bioresorbable Mg-Zn-Ca Screws After Medial Malleolar Fracture Fixation? Mid-Term Results of a First-In-Human Study

Valentin Herber et al.

Summary: This study used bioresorbable magnesium screws to treat patients with ankle fractures, and the results showed no pain, complications, or need for screw removal within 12 months. In most patients, the screw heads had degraded after one year without adverse reactions. Therefore, bioresorbable magnesium screws may be a viable option.

INJURY-INTERNATIONAL JOURNAL OF THE CARE OF THE INJURED (2022)

Add to Collection
Article Chemistry, Physical

Effect of Sc/Sm microalloying on microstructural and properties of Mg 2Zn-0.3Ca biodegradable alloy

Liuzhong Yang et al.

Summary: The influences of Sc/Sm microalloying on microstructure, mechanical property, bio-corrosion behavior and biocompatibility of the as-cast Mg-2Zn-0.3Ca alloy have been investigated. Sc microalloying refines the grain and improves the yield strength, while Sm microalloying promotes the formation of dispersed particles. Mg-2Zn-0.3Ca-0.4Sm alloy exhibits the best corrosion resistance and protective layer, and is non-cytotoxic and promotes cell proliferation.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection
Article Chemistry, Physical

Degradation Behavior and Mechanical Integrity of a Mg-0.7Zn-0.6Ca (wt.%) Alloy: Effect of Grain Sizes and Crystallographic Texture

Benjamin Millan-Ramos et al.

Summary: This study investigated the effect of annealing treatment on the performance of the ZX11 alloy and found that a higher annealing temperature resulted in an increased long-term degradation rate. This increased degradation rate affected the mechanical integrity of the alloy, but had minimal cytotoxic effects.

MATERIALS (2022)

Add to Collection
Article Metallurgy & Metallurgical Engineering

Effect of heat treatment on the mechanical and biocorrosion behaviour of two Mg-Zn-Ca alloys

N. Pulido-Gonzalez et al.

Summary: The effect of heat treatment on the mechanical and biocorrosion behavior of Mg-Zn-Ca alloys was investigated. The results showed that the thermal conditions significantly affected the microstructure and corrosion properties of the alloys.

JOURNAL OF MAGNESIUM AND ALLOYS (2022)

Add to Collection
Article Engineering, Biomedical

In vivo performance of a rare earth free Mg-Zn-Ca alloy manufactured using twin roll casting for potential applications in the cranial and maxillofacial fixation devices

Matthew S. Dargusch et al.

Summary: A novel twin-roll casting process has been used to fabricate a magnesium alloy containing essential, non-toxic, biodegradable elements such as Ca and Zn. The alloy showed comparable mechanical properties and biocompatibility to other rare earth element containing alloys, and exhibited a tissue healing response that may be more conducive to tissue proliferation and remodelling.

BIOACTIVE MATERIALS (2022)

Add to Collection
Article Engineering, Biomedical

In vitro and in vivo assessment of squeeze-cast Mg-Zn-Ca-Mn alloys for biomedical applications

Dae Hyun Cho et al.

Summary: In this study, biodegradable Mg-Zn-Ca-Mn alloys were prepared by squeeze casting, and it was found that increasing Mn content can improve the microstructure and corrosion resistance of the alloys. Samples with Mn showed the best mechanical properties and biocompatibility.

ACTA BIOMATERIALIA (2022)

Add to Collection
Article Materials Science, Multidisciplinary

The dynamics of recrystallized grains during static recrystallization in a hot-compressed Mg-3.2Zn-0.1Ca wt.% alloy using in-situ far field high-energy diffraction microscopy

Reza Roumina et al.

ACTA MATERIALIA (2022)

Add to Collection
Article Materials Science, Multidisciplinary

Precipitation in lean Mg-Zn-Ca alloys

R. E. Schaublin et al.

Summary: The impact of Zn and Ca on the microstructure of lean Mg-Zn-Ca alloys was investigated. The precipitation of binary and ternary precipitates was observed at different temperatures. Hardness testing revealed that GP zones were the most effective factor in hardening.

ACTA MATERIALIA (2022)

Add to Collection
Article Materials Science, Ceramics

Fabrication and characterization of hybrid coating on Mg-Zn-Ca Mg alloy for enhanced corrosion and degradation resistance as medical implant

Mostafizur Rahman et al.

Summary: This study reported a novel interfacial engineering approach for the fabrication of polymer/ceramic hybrid coating on magnesium alloy, which significantly improved mechanical properties, enhanced biointerface property, and slowed down degradation in simulated body fluid. The hybrid coating also improved corrosion resistance and enhanced biocompatibility and bioactivity.

CERAMICS INTERNATIONAL (2022)

Add to Collection
Article Engineering, Mechanical

Understanding the mechanisms of texture evolution in an Mg-2Zn-1Ca alloy during cold rolling and annealing

Xinde Huang et al.

Summary: The study investigated the texture evolution of a Mg-Zn-Ca plate during cold rolling and subsequent annealing. It was found that basal slip was the main deformation mode and prismatic slip preserved the TD-split texture. Pyramidal slip caused the widening of the basal texture. Grain nucleation occurred at grain boundaries, deformation twins, and near precipitates, with minimal texture change.

INTERNATIONAL JOURNAL OF PLASTICITY (2022)

Add to Collection
Article Materials Science, Multidisciplinary

Effect of friction stir processing on the corrosion behavior of an Mg-Zn-Ca composite containing 1.0 wt% MgO

Jian Han et al.

Summary: This study successfully optimized the microstructure of a magnesium-based composite through friction stir processing and improved the performance of the biomedical material. The treatment led to grain refinement and the formation of a basal texture, resulting in a reduced degradation rate. The high grain boundary density and uniform distribution of nanoparticles promoted the formation of a passivation film.

MATERIALS CHARACTERIZATION (2022)

Add to Collection
Article Nanoscience & Nanotechnology

Achieving exceptional improvement of yield strength in Mg-Zn-Ca alloy wire by nanoparticles induced by extreme plastic deformation

Hongfei Zhang et al.

Summary: This study demonstrates that extreme plastic deformation can successfully introduce nanoparticles and adjust the mechanical properties of Mg-Zn-Ca alloy, resulting in significant improvement of yield strength and good ductility.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

Add to Collection
Review Crystallography

Current Research Studies of Mg-Ca-Zn Biodegradable Alloys Used as Orthopedic Implants-Review

Bogdan Istrate et al.

Summary: Biodegradable magnesium-based alloys are considered promising materials for medical applications due to their biocompatibility and excellent mechanical properties. They have been used in the production of implants for small bones and joints, showing high biocompatibility, adequate mechanical properties, and rapid degradation without the need for a second surgery.

CRYSTALS (2022)

Add to Collection
Article Materials Science, Multidisciplinary

Strength and fracture mechanism of a magnesium alloy for medical applications after equal-channel angular pressing

G. Klevtsov et al.

Summary: This study investigates the effect of equal-channel angular pressing (ECAP) on the strength and fracture mechanism of cast magnesium alloy. The results show that ECAP leads to improved strength and elongation but reduced resistance to one-time impact loads. Therefore, the ECAP-treated magnesium alloy Mg-Zn-Ca holds more promise for the manufacture of medical products subjected to static loads.

LETTERS ON MATERIALS (2022)

Add to Collection
Article Materials Science, Multidisciplinary

The effect of testing conditions on stress corrosion cracking of biodegradable magnesium alloy ZK60

E. D. Merson et al.

Summary: The effect of chemical composition, temperature, circulation, and pH of simulated body fluid (SBF) on the corrosion and stress corrosion cracking (SCC) susceptibility of alloy ZK60 was investigated. The study found that chemical composition and pH adjustment of SBF significantly affected the corrosion and SCC susceptibility of the alloy, while temperature and circulation had a minor effect. pH adjustment decreased the corrosion rate and increased the SCC susceptibility of the alloy. The experimental factors considered in this study should be taken into account for reliable assessment of the corrosion and SCC resistance of biomedical Mg alloys.

LETTERS ON MATERIALS (2022)

Add to Collection
Article Engineering, Biomedical

Biocompatibility evaluation of peo-treated magnesium alloy implants placed in rabbit femur condyle notches and paravertebral muscles

Seong Ryoung Kim et al.

Summary: Magnesium alloys have garnered significant attention for use in biodegradable metal implants due to their excellent mechanical properties and biocompatibility. However, their rapid breakdown and low bioactivity can lead to mechanical integrity loss before complete bone healing. To address these issues, zinc (Zn) and calcium (Ca) can be added to improve mechanical properties and biocompatibility. Another approach to improving mechanical properties is plasma electrolytic oxidation (PEO), which creates a dense, ceramic-like coating on the magnesium surface. This study evaluated the biocompatibility of high-purity magnesium, Mg-1wt%Zn-0.1wt%Ca alloy, and PEO-treated Mg-1wt%Zn-0.1wt%Ca alloy through radiographic and histological analyses. The results showed that Mg-1wt%Zn-0.1wt%Ca alloy exhibited higher corrosion resistance than high-purity magnesium and degraded safely over time without causing adverse reactions. Additionally, PEO treatment of Mg-1wt%Zn-0.1wt%Ca alloy positively affected fracture recovery by increasing bonding with bone. These findings suggest that PEO-treated Mg-1wt%Zn-0.1wt%Ca alloy holds promise as a biomaterial in various clinical situations, such as orthopedic and maxillofacial surgeries.

BIOMATERIALS RESEARCH (2022)

Add to Collection
Article Materials Science, Multidisciplinary

Quantitative estimation of the corrosion rate of metallic materials using confocal laser scanning microscopy

V. A. Danilov et al.

Summary: This study presents an alternative method for quantitative estimation of corrosion rate of metallic materials using CLSM, providing 3D images and topographic data. Specific methodological aspects and the possibility of using CLSM for corrosion damage analysis are discussed. Recommendations include using polyethylene as a mounting material and determining optimal magnification and scanning parameters for accurate measurements. The study demonstrates satisfactory repeatability in measuring corrosion rate of magnesium.

LETTERS ON MATERIALS (2021)

Add to Collection
Article Materials Science, Multidisciplinary

Regulation of corrosion damage of magnesium alloys through the use of vacuum zirconium coatings

M. L. Linderov et al.

Summary: This study demonstrates that applying vacuum zirconium coatings on magnesium alloys can effectively control corrosion damage, thus enhancing their potential for medical applications.

LETTERS ON MATERIALS (2021)

Add to Collection
Article Materials Science, Multidisciplinary

Effect of hydrogen pick -up on the fatigue behavior of the β-type Ti-12Mo-6Zr-2Fe alloy with ω-nanoprecipitation

Leonardo Contri Campanelli et al.

Summary: The fatigue mechanical behavior of metastable beta-type Ti-12Mo-6Zr-2Fe alloy was evaluated, showing promising properties when subjected to solution treatment and quenching. However, after chemical etching and surface polishing, the fatigue limit decreased significantly due to hydrogen pick-up, leading to the precipitation of fine hydrides at high energy grain boundaries. This resulted in a change in fatigue crack initiation to a subsurface mode induced by the cleavage of hydride precipitates.

MATERIALS LETTERS (2021)

Add to Collection
Article Metallurgy & Metallurgical Engineering

Comparative Electrochemical Study of Pure Magnesium Behavior in Ringer's and Hank's Solutions

Marwa Hattab et al.

Summary: The corrosion behavior of high purity magnesium in simulated physiological solutions was studied, revealing that the formation of a compact layer on the magnesium surface under rotation conditions can enhance its corrosion protective ability. The thickness of this layer increases gradually with immersion time.

PROTECTION OF METALS AND PHYSICAL CHEMISTRY OF SURFACES (2021)

Add to Collection
Article Metallurgy & Metallurgical Engineering

Microstructure and mechanical and corrosion properties of hot-extruded Mg-Zn-Ca-(Mn) biodegradable alloys

V. E. Bazhenov et al.

Summary: Biodegradable Mg-Zn-Ca-(Mn) alloys undergo grain refinement, increased strength, and decreased elongation during hot extrusion, with the addition of Mn significantly reducing the corrosion rate of the alloys, making them suitable for orthopedic implants.

JOURNAL OF MAGNESIUM AND ALLOYS (2021)

Add to Collection
Article Materials Science, Multidisciplinary

Inhibiting stress corrosion cracking by removing corrosion products from the Mg-Zn-Zr alloy pre-exposed to corrosion solutions

Evgeniy Merson et al.

Summary: The study demonstrates that stress-corrosion cracking (SCC) in magnesium and its alloys during slow-strain rate tensile testing in air is related to hydrogen embrittlement and the corrosion product layer. However, the complete recovery of mechanical response and elimination of harmful embrittling features can be achieved by removing corrosion products from the surface of pre-exposed specimens, which challenges the common viewpoint that SCC mechanism is solely governed by diffusible hydrogen.

ACTA MATERIALIA (2021)

Add to Collection
Article Nanoscience & Nanotechnology

Improving mechanical properties of lean Mg-Zn-Ca alloy for absorbable implants via Double Equal Channel Angular Pressing (D-ECAP)

J. Horky et al.

Summary: Mg alloys are suitable for biodegradable osteosynthesis implants, but high degradation rates and low strength values are drawbacks. A lean Mg-Zn-Ca alloy processed by D-ECAP shows desirable mechanical properties and low degradation rate, which can be tailored according to the requirements of the final application.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Add to Collection
Article Materials Science, Multidisciplinary

Effect of Gd on microstructure and stress corrosion cracking of the AZ91-extruded magnesium alloy

Yulai Song et al.

Summary: The addition of Gd significantly improves the corrosion resistance and stress corrosion resistance of the AZ91 magnesium alloy. The fracture mode of the magnesium alloy is also influenced by the addition of Gd, leading to an overall improvement in the alloy's performance.

MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2021)

Add to Collection
Article Crystallography

Rationale for Processing of a Mg-Zn-Ca Alloy by Equal-Channel Angular Pressing for Use in Biodegradable Implants for Osteoreconstruction

Natalia S. Martynenko et al.

Summary: The Mg-1%Zn-0.3%Ca alloy modified by equal-channel angular pressing demonstrates good biocompatibility and osteogenic stimulation, making it a promising candidate for the manufacture of biodegradable orthopedic implants.

CRYSTALS (2021)

Add to Collection
Article Engineering, Biomedical

Comparative in vitro study on binary Mg-RE (Sc, Y, La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb and Lu) alloy systems

Jianing Liu et al.

ACTA BIOMATERIALIA (2020)

Add to Collection
Article Materials Science, Multidisciplinary

Influence of ultra-fine grain structure on corrosion behaviour of biodegradable Mg-1Ca alloy

E. V. Parfenov et al.

CORROSION SCIENCE (2020)

Add to Collection
Article Materials Science, Multidisciplinary

Effects of Minor Sr Addition on Biocorrosion and Stress Corrosion Cracking of As-Cast Mg-4Zn Alloys

Xiaole Gong et al.

CORROSION (2020)

Add to Collection
Article Engineering, Biomedical

Enhancement of stress corrosion cracking of AZ31 magnesium alloy in simulated body fluid thanks to cryogenic machining

M. Peron et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2020)

Add to Collection
Article Materials Science, Multidisciplinary

Degradation, stress corrosion cracking behavior and cytocompatibility of high strain rate rolled Mg-Zn-Sr alloys

Zonglin Yu et al.

MATERIALS LETTERS (2020)

Add to Collection
Article Materials Science, Biomaterials

Elucidating the role of microstructural modification on stress corrosion cracking of biodegradable Mg-4Zn alloy in simulated body fluid

Deepa B. Prabhu et al.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)

Add to Collection
Article Chemistry, Physical

The Functional Properties of Mg-Zn-X Biodegradable Magnesium Alloys

Dmitry Merson et al.

MATERIALS (2020)

Add to Collection
Article Metallurgy & Metallurgical Engineering

Corrosion fatigue of the extruded Mg-Zn-Y-Nd alloy in simulated body fluid

Mengyao Liu et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2020)

Add to Collection
Article Metallurgy & Metallurgical Engineering

Microstructural, mechanical and corrosion characterization of an as-cast Mg-3Zn-0.4Ca alloy for biomedical applications

N. Pulido-Gonzalez et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2020)

Add to Collection
Article Metallurgy & Metallurgical Engineering

Gallium-containing magnesium alloy for potential use as temporary implants in osteosynthesis

Viacheslav Bazhenov et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2020)

Add to Collection
Article Metallurgy & Metallurgical Engineering

Degradation of AZ31 and AZ91 magnesium alloys in different physiological media: Effect of surface layer stability on electrochemical behaviour

Emmanuel Mena-Morcillo et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2020)

Add to Collection
Article Engineering, Biomedical

A lean magnesium-zinc-calcium alloy ZX00 used for bone fracture stabilization in a large growing-animal model

Patrick Holweg et al.

ACTA BIOMATERIALIA (2020)

Add to Collection
Article Engineering, Biomedical

The effect of Equal Channel Angular Pressing on the stress corrosion cracking susceptibility of AZ31 alloy in simulated body fluid

Mirco Peron et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2020)

Add to Collection
Article Nanoscience & Nanotechnology

Comparative study on the stress corrosion cracking susceptibility of AZ80 and AZ31 magnesium alloys

Dhananjay Dubey et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

Add to Collection
Article Materials Science, Multidisciplinary

The stress corrosion cracking behaviour of biomedical Mg-1Zn alloy in synthetic or natural biological media

Lianxi Chen et al.

CORROSION SCIENCE (2020)

Add to Collection
Article Materials Science, Multidisciplinary

Microstructure-corrosion behaviour relationship of micro-alloyed Mg-0.5Zn alloy with the addition of Ca, Sr, Ag, In and Cu

Yiming Jin et al.

MATERIALS & DESIGN (2020)

Add to Collection
Article Materials Science, Multidisciplinary

The mechanical and corrosion resistance of Mg-Zn-Ca-Ag alloys: the influence of Ag content

Leiting Yu et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

Add to Collection
Review Metallurgy & Metallurgical Engineering

Review of Mg alloy corrosion rates

Andrej Atrens et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2020)

Add to Collection
Article Metallurgy & Metallurgical Engineering

Structure, mechanical characteristics, biodegradation, and in vitro cytotoxicity of magnesium alloy ZX11 processed by rotary swaging

Natalia Martynenko et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2020)

Add to Collection
Article Materials Science, Multidisciplinary

Bulk nanocrystalline high-strength magnesium alloys prepared via rotary swaging

Yingchun Wan et al.

ACTA MATERIALIA (2020)

Add to Collection
Article Materials Science, Multidisciplinary

Effect of deformation processing of the dilute Mg-1Zn-0.2Ca alloy on the mechanical properties and corrosion rate in a simulated body fluid

D. L. Merson et al.

LETTERS ON MATERIALS (2020)

Add to Collection
Article Chemistry, Applied

Stress corrosion cracking behaviors of RE-containing ME21 magnesium alloy processed by equal-channel angular pressing

Jinghua Jiang et al.

JOURNAL OF RARE EARTHS (2019)

Add to Collection
Article Materials Science, Multidisciplinary

High Performance Fine-Grained Biodegradable Mg-Zn-Ca Alloys Processed by Severe Plastic Deformation

Alexei Vinogradov et al.

METALS (2019)

Add to Collection
Article Engineering, Biomedical

Laser additive manufacturing of biodegradable magnesium alloy WE43: A detailed microstructure analysis

Florian Baer et al.

ACTA BIOMATERIALIA (2019)

Add to Collection
Article Materials Science, Multidisciplinary

Improving the mechanical properties and biocorrosion resistance of extruded Mg-Zn-Ca-Mn alloy through hot deformation

M. Kaviani et al.

MATERIALS CHEMISTRY AND PHYSICS (2019)

Add to Collection
Article Engineering, Biomedical

The role of zinc in the biocorrosion behavior of resorbable Mg-Zn-Ca alloys

M. Cihova et al.

ACTA BIOMATERIALIA (2019)

Add to Collection
Article Materials Science, Multidisciplinary

Optimization of ball-burnishing process parameters on surface roughness, micro hardness of Mg-Zn-Ca alloy and investigation of corrosion behavior

S. Ramesh et al.

MATERIALS RESEARCH EXPRESS (2019)

Add to Collection
Article Materials Science, Multidisciplinary

Microstructure, mechanical, and corrosion properties of extruded low-alloyed Mg-xZn-0.2Ca alloys

Ying-zhong Ma et al.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2019)

Add to Collection
Review Materials Science, Multidisciplinary

Mechanical properties, corrosion resistance and biocompatibilities of degradable Mg-RE alloys: A review

Dexue Liu et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)

Add to Collection
Article Chemistry, Physical

Exceptional Strengthening of Biodegradable Mg-Zn-Ca Alloys through High Pressure Torsion and Subsequent Heat Treatment

Jelena Horky et al.

MATERIALS (2019)

Add to Collection
Article Materials Science, Multidisciplinary

High-Strength AZ91 Alloy Fabricated by Rapidly Solidified Flaky Powder Metallurgy and Hot Extrusion

Taekyung Lee et al.

METALS AND MATERIALS INTERNATIONAL (2019)

Add to Collection
Article Materials Science, Multidisciplinary

High strength and fatigue properties of Mg-Zn-Ca alloys after severe plastic deformation

E. V. Vasilev et al.

LETTERS ON MATERIALS (2019)

Add to Collection
Article Materials Science, Multidisciplinary

Corrosion Fatigue of Fine Grain Mg-Zn-Zr and Mg-Y-Zn Alloys

Mikhail Linderov et al.

METALS (2018)

Add to Collection
Review Materials Science, Multidisciplinary

Corrosion Behaviors of Long-Period Stacking Ordered Structure in Mg Alloys Used in Biomaterials: A Review

Ximei Zong et al.

ADVANCED ENGINEERING MATERIALS (2018)

Add to Collection
Article Nanoscience & Nanotechnology

Increasing strength and ductility of magnesium alloy WE43 by equal-channel angular pressing

N. S. Martynenko et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

Add to Collection
Article Chemistry, Physical

Effect of the Microstructure and Distribution of the Second Phase on the Stress Corrosion Cracking of Biomedical Mg-Zn-Zr-xSr Alloys

Lianxi Chen et al.

MATERIALS (2018)

Add to Collection
Article Chemistry, Multidisciplinary

Local pH and Its Evolution Near Mg Alloy Surfaces Exposed to Simulated Body Fluids

Sviatlana V. Lamaka et al.

ADVANCED MATERIALS INTERFACES (2018)

Add to Collection
Correction Engineering, Biomedical

An innovative Mg/Ti hybrid fixation system developed for fracture fixation and healing enhancement at load-bearing skeletal site (vol 180, pg 173, 2018)

Li Tian et al.

BIOMATERIALS (2018)

Add to Collection
Article Metallurgy & Metallurgical Engineering

Influence of Ca addition on microstructure, mechanical properties and corrosion behavior of Mg-2Zn alloy

Hong-xiang Li et al.

CHINA FOUNDRY (2018)

Add to Collection
Article Mechanics

Stress corrosion cracking of an extruded magnesium alloy (ZK21) in a simulated body fluid

Sajjad Jafari et al.

ENGINEERING FRACTURE MECHANICS (2018)

Add to Collection
Review Materials Science, Multidisciplinary

Tailoring Microstructure and Properties of Fine Grained Magnesium Alloys by Severe Plastic Deformation

Alexei Vinogradov et al.

ADVANCED ENGINEERING MATERIALS (2018)

Add to Collection
Article Materials Science, Multidisciplinary

Influence of Gd and Ca on microstructure, mechanical and corrosion properties of Mg-Gd-Zn(-Ca) alloys

X. Zhang et al.

MATERIALS TECHNOLOGY (2017)

Add to Collection
Article Engineering, Mechanical

The fatigue life of notched magnesium sheet metals with emphasis on the effect of bands of twinned grains

Josef Denk et al.

INTERNATIONAL JOURNAL OF FATIGUE (2017)

Add to Collection
Article Engineering, Biomedical

Stress corrosion cracking and corrosion fatigue characterisation of MgZn1Ca0.3 (ZX10) in a simulated physiological environment

Sajjad Jafari et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2017)

Add to Collection
Article Biochemistry & Molecular Biology

Aluminium in brain tissue in familial Alzheimer's disease

Ambreen Mirza et al.

JOURNAL OF TRACE ELEMENTS IN MEDICINE AND BIOLOGY (2017)

Add to Collection
Article Materials Science, Biomaterials

Influence of bovine serum albumin in Hanks' solution on the corrosion and stress corrosion cracking of a magnesium alloy

Shervin Eslami Harandi et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)

Add to Collection
Article Nanoscience & Nanotechnology

Enhancing the strength and ductility in accumulative back extruded WE43 magnesium alloy through achieving bimodal grain size distribution and texture weakening

Sh. Asqardoust et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

Add to Collection
Review Materials Science, Multidisciplinary

Mg and Its Alloys for Biomedical Applications: Exploring Corrosion and Its Interplay with Mechanical Failure

Mirco Peron et al.

METALS (2017)

Add to Collection
Article Multidisciplinary Sciences

Accelerating Corrosion of Pure Magnesium Co-implanted with Titanium in Vivo

Peng Hou et al.

SCIENTIFIC REPORTS (2017)

Add to Collection
Review Engineering, Biomedical

Current status on clinical applications of magnesium-based orthopaedic implants: A review from clinical translational perspective

Dewei Zhao et al.

BIOMATERIALS (2017)

Add to Collection
Review Chemistry, Physical

Resistance of Magnesium Alloys to Corrosion Fatigue for Biodegradable Implant Applications: Current Status and Challenges

R. K. Singh Raman et al.

MATERIALS (2017)

Add to Collection
Article Engineering, Biomedical

Bio-Corrosion of Magnesium Alloys for Orthopaedic Applications

Emily K. Brooks et al.

JOURNAL OF FUNCTIONAL BIOMATERIALS (2017)

Add to Collection
Review Metallurgy & Metallurgical Engineering

Insight of magnesium alloys and composites for orthopedic implant applications - a review

R. Radha et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2017)

Add to Collection
Article Materials Science, Multidisciplinary

Influence of Precipitation Hardening in Mg-Y-Nd on Mechanical and Corrosion Properties

P. Maier et al.

JOM (2016)

Add to Collection
Article Engineering, Biomedical

Fatigue behaviors of HP-Mg, Mg-Ca and Mg-Zn-Ca biodegradable metals in air and simulated body fluid

Dong Bian et al.

ACTA BIOMATERIALIA (2016)

Add to Collection
Review Materials Science, Multidisciplinary

Corrosion and passivation of magnesium alloys

Fuyong Cao et al.

CORROSION SCIENCE (2016)

Add to Collection
Article Chemistry, Physical

Development of dilute Mg-Zn-Ca-Mn alloy with high performance via extrusion

M. G. Jiang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2016)

Add to Collection
Article Materials Science, Biomaterials

Surface characterization, in vitro and in vivo biocompatibility of Mg-0.3Sr-0.3Ca for temporary cardiovascular implant

M. Bornapour et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)

Add to Collection
Review Materials Science, Biomaterials

Biodegradable magnesium alloys for orthopaedic applications: A review on corrosion, biocompatibility and surface modifications

Sankalp Agarwal et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)

Add to Collection
Article Nanoscience & Nanotechnology

Effects of dilute additions of Zn and Ca on ductility of magnesium alloy sheet

Z. R. Zeng et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

Add to Collection
Review Nanoscience & Nanotechnology

A review on high-pressure torsion (HPT) from 1935 to 1988

Kaveh Edalati et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

Add to Collection
Article Materials Science, Multidisciplinary

Effect of microalloying with Ca on the microstructure and mechanical properties of Mg-6 mass%Zn alloys

Y. Z. Du et al.

MATERIALS & DESIGN (2016)

Add to Collection
Article Engineering, Biomedical

In vivo study of magnesium plate and screw degradation and bone fracture healing

Amy Chaya et al.

ACTA BIOMATERIALIA (2015)

Add to Collection
Article Materials Science, Multidisciplinary

Processing and microstructure-property relations of high-strength low-alloy (HSLA) Mg-Zn-Ca alloys

J. Hofstetter et al.

ACTA MATERIALIA (2015)

Add to Collection
Article Materials Science, Multidisciplinary

Mechanical Properties of Ultrafine-Grained Metals: New Challenges and Perspectives

Alexei Vinogradov

ADVANCED ENGINEERING MATERIALS (2015)

Add to Collection
Review Materials Science, Multidisciplinary

Review of Recent Developments in the Field of Magnesium Corrosion

Andrej Atrens et al.

ADVANCED ENGINEERING MATERIALS (2015)

Add to Collection
Article Environmental Sciences

Health effects and toxicity mechanisms of rare earth elements-Knowledge gaps and research prospects

Giovanni Pagano et al.

ECOTOXICOLOGY AND ENVIRONMENTAL SAFETY (2015)

Add to Collection
Article Electrochemistry

Gravimetric Method for Hydrogen Evolution Measurements on Dissolving Magnesium

S. Fajardo et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2015)

Add to Collection
Article Materials Science, Biomaterials

Effects of secondary phase and grain size on the corrosion of biodegradable Mg-Zn-Ca alloys

Y. Lu et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2015)

Add to Collection
Review Materials Science, Multidisciplinary

Metallic implant biomaterials

Qizhi Chen et al.

MATERIALS SCIENCE & ENGINEERING R-REPORTS (2015)

Add to Collection
Review Physiology

THE PHYSIOLOGICAL, BIOCHEMICAL, AND MOLECULAR ROLES OF ZINC TRANSPORTERS IN ZINC HOMEOSTASIS AND METABOLISM

Taiho Kambe et al.

PHYSIOLOGICAL REVIEWS (2015)

Add to Collection
Review Engineering, Biomedical

Recent Advances in Biodegradable Metals for Medical Sutures: A Critical Review

Jan-Marten Seitz et al.

ADVANCED HEALTHCARE MATERIALS (2015)

Add to Collection
Article Materials Science, Multidisciplinary

Fatigue Performance of Mg-Zn-Zr Alloy Processed by Hot Severe Plastic Deformation

Evgeni Vasilev et al.

METALS (2015)

Add to Collection
Review Engineering, Biomedical

Recent advances on the development of magnesium alloys for biodegradable implants

Yongjun Chen et al.

ACTA BIOMATERIALIA (2014)

Add to Collection
Article Materials Science, Multidisciplinary

High-Strength Low-Alloy (HSLA) Mg-Zn-Ca Alloys with Excellent Biodegradation Performance

J. Hofstetter et al.

JOM (2014)

Add to Collection
Review Engineering, Biomedical

Magnesium biomaterials for orthopedic application: A review from a biological perspective

Jemimah Walker et al.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2014)

Add to Collection
Review Public, Environmental & Occupational Health

Is the Aluminum Hypothesis Dead?

Theodore I. Lidsky

JOURNAL OF OCCUPATIONAL AND ENVIRONMENTAL MEDICINE (2014)

Add to Collection
Article Engineering, Biomedical

Fatigue behavior of Ti6Al4V and 316 LVM blasted with ceramic particles of interest for medical devices

S. Barriuso et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2014)

Add to Collection
Article Materials Science, Multidisciplinary

Mechanical and bio-corrosion properties of quaternary Mg-Ca-Mn-Zn alloys compared with binary Mg-Ca alloys

H. R. Bakhsheshi-Rad et al.

MATERIALS & DESIGN (2014)

Add to Collection
Article Materials Science, Multidisciplinary

Microstructure and bio-corrosion behavior of Mg-Zn and Mg-Zn-Ca alloys for biomedical applications

H. R. Bakhsheshi-Rad et al.

MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2014)

Add to Collection
Article Materials Science, Biomaterials

In-vitro characterization of stress corrosion cracking of aluminium-free magnesium alloys for temporary bio-implant applications

Lokesh Choudhary et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2014)

Add to Collection
Review Materials Science, Multidisciplinary

Biodegradable metals

Y. F. Zheng et al.

MATERIALS SCIENCE & ENGINEERING R-REPORTS (2014)

Add to Collection
Article Chemistry, Multidisciplinary

The control of crystallographic texture in the use of magnesium as a resorbable biomaterial

Sumit Bahl et al.

RSC ADVANCES (2014)

Add to Collection
Review Biochemistry & Molecular Biology

Magnesium-based implants: a mini-review

Berengere J. C. Luthringer et al.

MAGNESIUM RESEARCH (2014)

Add to Collection
Proceedings Paper Engineering, Multidisciplinary

Twin-Roll-Casting and hot rolling of magnesium alloy WE43

Kristina Neh et al.

11TH INTERNATIONAL CONFERENCE ON TECHNOLOGY OF PLASTICITY, ICTP 2014 (2014)

Add to Collection
Article Materials Science, Multidisciplinary

Effect of grain size on the mechanisms of plastic deformation in wrought Mg-Zn-Zr alloy revealed by acoustic emission measurements

Alexei Vinogradov et al.

ACTA MATERIALIA (2013)

Add to Collection
Article Materials Science, Multidisciplinary

Extreme grain refinement by severe plastic deformation: A wealth of challenging science

Y. Estrin et al.

ACTA MATERIALIA (2013)

Add to Collection
Article Materials Science, Multidisciplinary

Influence of Surface Mechanical Attrition Treatment Attrition Media on the Surface Contamination and Corrosion of Magnesium

D. Fabijanic et al.

CORROSION (2013)

Add to Collection
Article Materials Science, Multidisciplinary

The in vivo and in vitro corrosion of high-purity magnesium and magnesium alloys WZ21 and AZ91

Nor Ishida Zainal Abidin et al.

CORROSION SCIENCE (2013)

Add to Collection
Article Nanoscience & Nanotechnology

Microstructures and mechanical properties of as-cast and as-extruded Mg-4.50Zn-1.13Ca (wt%) alloys

Y. Z. Du et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)

Add to Collection
Article Nanoscience & Nanotechnology

The effect of double extrusion on the microstructure and mechanical properties of Mg-Zn-Ca alloy

Y. Z. Du et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)

Add to Collection
Article Materials Science, Multidisciplinary

Texture Evolution in Mg-Zn-Ca Alloy Sheets

D. -W. Kim et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2013)

Add to Collection
Review Metallurgy & Metallurgical Engineering

Advances in Mg corrosion and research suggestions

Andrej Atrens et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2013)

Add to Collection
Review Engineering, Biomedical

Corrosion fatigue of biomedical metallic alloys: Mechanisms and mitigation

Renato Altobelli Antunes et al.

ACTA BIOMATERIALIA (2012)

Add to Collection
Review Engineering, Biomedical

Assessing the corrosion of biodegradable magnesium implants: A critical review of current methodologies and their limitations

N. T. Kirkland et al.

ACTA BIOMATERIALIA (2012)

Add to Collection
Article Multidisciplinary Sciences

Preparing Ca-P coating on biodegradable magnesium alloy by hydrothermal method: In vitro degradation behavior

Li KaiKai et al.

CHINESE SCIENCE BULLETIN (2012)

Add to Collection
Article Materials Science, Multidisciplinary

Effects of Crystallographic Orientation on Corrosion Behavior of Magnesium Single Crystals

Kwang Seon Shin et al.

JOM (2012)

Add to Collection
Article Engineering, Biomedical

Investigation of the mechanical and degradation properties of Mg-Sr and Mg-Zn-Sr alloys for use as potential biodegradable implant materials

Harpreet S. Brar et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2012)

Add to Collection
Article Materials Science, Multidisciplinary

Preparation and characterization of a new biomedical Mg-Zn-Ca alloy

Yu Sun et al.

MATERIALS & DESIGN (2012)

Add to Collection
Article Nanoscience & Nanotechnology

Extruded Mg-Zn-Ca-Mn alloys with low yield anisotropy

S. W. Xu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)

Add to Collection
Article Nanoscience & Nanotechnology

Effects of calcium on texture and mechanical properties of hot-extruded Mg-Zn-Ca alloys

Baoping Zhang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)

Add to Collection
Article Materials Science, Multidisciplinary

Development of an extruded Mg-Zn-Ca-based alloy: new insight on the role of Mn addition in precipitation

T. Homma et al.

PHILOSOPHICAL MAGAZINE (2012)

Add to Collection
Article Nanoscience & Nanotechnology

Improvement of fatigue strength of a Mg-Zn-Zr alloy by integrated extrusion and equal-channel angular pressing

Alexei Vinogradov et al.

SCRIPTA MATERIALIA (2012)

Add to Collection
Review Chemistry, Physical

Biodegradable Orthopedic Magnesium-Calcium (MgCa) Alloys, Processing, and Corrosion Performance

Meisam Salahshoor et al.

MATERIALS (2012)

Add to Collection
Article Urology & Nephrology

Magnesium basics

Wilhelm Jahnen-Dechent et al.

CLINICAL KIDNEY JOURNAL (2012)

Add to Collection
Article Engineering, Biomedical

Chemical surface alteration of biodegradable magnesium exposed to corrosion media

Regine Willumeit et al.

ACTA BIOMATERIALIA (2011)

Add to Collection
Article Materials Science, Multidisciplinary

Degradation behaviour of pure magnesium in simulated body fluids with different concentrations of HCO3-

Yunchang Xin et al.

CORROSION SCIENCE (2011)

Add to Collection
Article Materials Science, Biomaterials

Mechanical properties, degradation performance and cytotoxicity of Mg-Zn-Ca biomedical alloys with different compositions

Baoping Zhang et al.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2011)

Add to Collection
Article Nanoscience & Nanotechnology

Effect of Mn addition on microstructure, texture and mechanical properties of Mg-Zn-Ca alloy

L. B. Tong et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)

Add to Collection
Article Nanoscience & Nanotechnology

High-strength magnesium alloys for degradable implant applications

P. Gunde et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)

Add to Collection
Review Materials Science, Multidisciplinary

Corrosion mechanism applicable to biodegradable magnesium implants

Andrej Atrens et al.

MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2011)

Add to Collection
Article Materials Science, Multidisciplinary

Microstructure evolution in MA14 magnesium alloy under multi-step isothermal forging

D. R. Nugmanov et al.

LETTERS ON MATERIALS-PIS MA O MATERIALAKH (2011)

Add to Collection
Article Engineering, Biomedical

In vitro degradation and mechanical integrity of Mg-Zn-Ca alloy coated with Ca-deficient hydroxyapatite by the pulse electrodeposition process

H. X. Wang et al.

ACTA BIOMATERIALIA (2010)

Add to Collection
Article Engineering, Biomedical

The history of biodegradable magnesium implants: A review

Frank Witte

ACTA BIOMATERIALIA (2010)

Add to Collection
Article Engineering, Biomedical

Research on an Mg-Zn alloy as a degradable biomaterial

Shaoxiang Zhang et al.

ACTA BIOMATERIALIA (2010)

Add to Collection
Review Materials Science, Multidisciplinary

The Art and Science of Tailoring Materials by Nanostructuring for Advanced Properties Using SPD Techniques

Ruslan Z. Valiev et al.

ADVANCED ENGINEERING MATERIALS (2010)

Add to Collection
Review Materials Science, Multidisciplinary

Effect of Grain Size on Corrosion: A Review

K. D. Ralston et al.

CORROSION (2010)

Add to Collection
Article Materials Science, Multidisciplinary

Grain character influences on corrosion of ECAPed pure magnesium

N. Birbilis et al.

CORROSION ENGINEERING SCIENCE AND TECHNOLOGY (2010)

Add to Collection
Article Engineering, Biomedical

Bio-corrosion characterization of Mg-Zn-X (X = Ca, Mn, Si) alloys for biomedical applications

F. Rosalbino et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2010)

Add to Collection
Article Materials Science, Multidisciplinary

Determination of the Cyclic-Tension Fatigue of Extruded Pure Magnesium Using Multiple Ultrasonic Waves

Hideki Yamagishi et al.

MATERIALS TRANSACTIONS (2010)

Add to Collection
Article Nanoscience & Nanotechnology

Enhanced mechanical properties in fine-grained Mg-1.0Zn-0.5Ca alloys prepared by extrusion at different temperatures

B. P. Zhang et al.

SCRIPTA MATERIALIA (2010)

Add to Collection
Article Nanoscience & Nanotechnology

Revealing the relationship between grain size and corrosion rate of metals

K. D. Ralston et al.

SCRIPTA MATERIALIA (2010)

Add to Collection
Article Engineering, Biomedical

In vitro corrosion and biocompatibility of binary magnesium alloys

Xuenan Gu et al.

BIOMATERIALS (2009)

Add to Collection
Article Materials Science, Multidisciplinary

Relation between corrosion behavior and microstructure of Mg-Zn-Y alloys prepared by rapid solidification at various cooling rates

Shogo Izumi et al.

CORROSION SCIENCE (2009)

Add to Collection
Article Materials Science, Multidisciplinary

Degradable biomaterials based on magnesium corrosion

Frank Witte et al.

CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2009)

Add to Collection
Article Nanoscience & Nanotechnology

Microstructure and mechanical properties of Mg-Zn-Ca alloy processed by equal channel angular pressing

L. B. Tong et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)

Add to Collection
Article Engineering, Biomedical

The development of binary Mg-Ca alloys for use as biodegradable materials within bone

Zijian Li et al.

BIOMATERIALS (2008)

Add to Collection
Article Engineering, Mechanical

Corrosion fatigue behavior of extruded magnesium alloy AZ61 under three different corrosive environments

Md. Shahnewaz Bhuiyan et al.

INTERNATIONAL JOURNAL OF FATIGUE (2008)

Add to Collection
Article Materials Science, Multidisciplinary

Bio-corrosion of a magnesium alloy with different processing histories

H. Wang et al.

MATERIALS LETTERS (2008)

Add to Collection
Article Nanoscience & Nanotechnology

Characterisation of stress corrosion cracking (SCC) of Mg-Al alloys

N. Winzer et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)

Add to Collection
Article Nanoscience & Nanotechnology

Grain size effects on the tensile properties and deformation mechanisms of a magnesium alloy, AZ31B, sheet

A. Jain et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)

Add to Collection
Article Materials Science, Multidisciplinary

Effect of T5 and T6 tempers on a hot-rolled WE43 magnesium alloy

Kun Yu et al.

MATERIALS TRANSACTIONS (2008)

Add to Collection
Article Nanoscience & Nanotechnology

The effect of crystallographic orientation on the active corrosion of pure magnesium

Ming Liu et al.

SCRIPTA MATERIALIA (2008)

Add to Collection
Article Nanoscience & Nanotechnology

Potency of high-intensity ultrasonic treatment for grain refinement of magnesium alloys

A. Ramirez et al.

SCRIPTA MATERIALIA (2008)

Add to Collection
Article Metallurgy & Metallurgical Engineering

Grain size and texture changes of magnesium alloy AZ31 during multi-directional forging

Yang Xu-yue et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2008)

Add to Collection
Article Materials Science, Multidisciplinary

The effect of pre-processing and grain structure on the bio-corrosion and fatigue resistance of magnesium alloy AZ31

Hao Wang et al.

ADVANCED ENGINEERING MATERIALS (2007)

Add to Collection
Article Engineering, Mechanical

In-body corrosion fatigue failure of a stainless steel orthopaedic implant with a rare collection of different damage mechanisms

H. Amel-Farzad et al.

ENGINEERING FAILURE ANALYSIS (2007)

Add to Collection
Article Materials Science, Multidisciplinary

Degradation susceptibility of surgical magnesium alloy in artificial biological fluid containing albumin

Chenglong Liu et al.

JOURNAL OF MATERIALS RESEARCH (2007)

Add to Collection
Article Nanoscience & Nanotechnology

High strength and fracture toughness balance on the extruded Mg-Ca-Zn alloy

Hidetoshi Somekawa et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)

Add to Collection
Article Materials Science, Multidisciplinary

Control of biodegradation of biocompatable magnesium alloys

Guangling Song

CORROSION SCIENCE (2007)

Add to Collection
Article Materials Science, Multidisciplinary

Validation of corrosion rates measured by the Tafel extrapolation method

E McCafferty

CORROSION SCIENCE (2005)

Add to Collection
Article Materials Science, Multidisciplinary

Crystallographic pitting in magnesium single crystals

CR McCall et al.

CORROSION ENGINEERING SCIENCE AND TECHNOLOGY (2005)

Add to Collection
Review Materials Science, Multidisciplinary

A critical review of the stress corrosion cracking (SCC) of magnesium alloys

N Winzer et al.

ADVANCED ENGINEERING MATERIALS (2005)

Add to Collection
Article Materials Science, Multidisciplinary

Grain refinement of magnesium alloys

DH StJohn et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2005)

Add to Collection
Review Materials Science, Multidisciplinary

Understanding magnesium corrosion - A framework for improved alloy performance

GL Song et al.

ADVANCED ENGINEERING MATERIALS (2003)

Add to Collection
Article Engineering, Industrial

Grain refinement in commercial alloys due to high plastic deformations and phase transformations

OA Kaibyshev

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2001)

Add to Collection
Article Materials Science, Multidisciplinary

Rapidly solidified powder metallurgy Mg97Zn1Y2Alloys with excellent tensile yield strength above 600 MPa

Y Kawamura et al.

MATERIALS TRANSACTIONS (2001)

Add to Collection
Webinars Posters Questions Hubs Funding Journals Papers Connect Collections Reviewers About Us FAQs Mobile App Privacy Policy Terms of Use
© Peeref 2019-2024. All rights reserved.