Related references
Note: Only part of the references are listed.Assessment of erosion rate on AA7075 based surface hybrid composites fabricated through friction stir processing by taguchi optimization approach
Suganeswaran Kandasamy et al.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2022)
Effect of Halloysite Nanotubes on Matrix Microcracking in Carbon Fiber/Epoxy Composites
M. J. Churruca et al.
MECHANICS OF COMPOSITE MATERIALS (2022)
Lightweight hybrid materials and structures for energy absorption: A state-of-the-art review and outlook
Guangyong Sun et al.
THIN-WALLED STRUCTURES (2022)
Multiple objective optimization design of hybrid composite structures considering multiple-scale uncertainties
Xiang Peng et al.
COMPOSITE STRUCTURES (2022)
Taguchi design-based synthesis and structural analysis of Cassia galactomannan hydroxypropyl derivative
Deepak Sharma et al.
CARBOHYDRATE POLYMERS (2022)
Relaxed Rank Order Centroid Weighting MCDM Method With Improved Grey Relational Analysis for Subcontractor Selection: Photothermal Power Station Construction
Moses Olabhele Esangbedo et al.
IEEE TRANSACTIONS ON ENGINEERING MANAGEMENT (2022)
Optimization and significance of fabrication parameters on the mechanical properties of 3D printed Chitosan/PLA scaffold
Johnson Kehinde Abifarin et al.
MATERIALS TODAY-PROCEEDINGS (2022)
Multi-Objective Optimization of WEDM of Aluminum Hybrid Composites Using AHP and Genetic Algorithm
Amresh Kumar et al.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2022)
Effect of Tool Coating and Cutting Parameters on Surface Roughness and Burr Formation during Micromilling of Inconel 718
Atif Muhammad et al.
METALS (2021)
Drilling Parameters Analysis on In-Situ Al/B4C/Mica Hybrid Composite and an Integrated Optimization Approach Using Fuzzy Model and Non-Dominated Sorting Genetic Algorithm
Palanikumar Kayaroganam et al.
METALS (2021)
Optimization of Compression Molding Process Parameters for NFPC Manufacturing Using Taguchi Design of Experiment and Moldflow Analysis
Vardaan Chauhan et al.
PROCESSES (2021)
Investigations on tool wear, surface roughness, cutting temperature, and chip formation in machining of Cu-B-CrC composites
Usame Ali Usca et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)
Taguchi grey relational analysis on the mechanical properties of natural hydroxyapatite: effect of sintering parameters
Johnson Kehinde Abifarin
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)
Multifunctionality in Epoxy Resins
Jaworski C. Capricho et al.
POLYMER REVIEWS (2020)
Concurrent multi-scale optimization of hybrid composite plates and shells for vibration
Xiangtao Ma et al.
COMPOSITE STRUCTURES (2020)
Exploring Grey Systems Theory-Based Methods and Applications in Sustainability Studies: A Systematic Review Approach
Ehsan Javanmardi et al.
SUSTAINABILITY (2020)
Multi-objective optimal design of hybrid composite laminates under eccentric loading
Bertan Beylergil
ALEXANDRIA ENGINEERING JOURNAL (2020)
Forging optimisation process using numerical simulation and Taguchi method
Japeth Oirere Obiko et al.
SN APPLIED SCIENCES (2020)
Multi-objective optimal design of hybrid composite laminates for minimum cost and maximum fundamental frequency and frequency gaps
Haichao An et al.
COMPOSITE STRUCTURES (2019)
Taguchi Design of PZT-Based Piezoelectric Cantilever Beam with Maximum and Robust Voltage for Wide Frequency Range
Sanghyun Park et al.
JOURNAL OF ELECTRONIC MATERIALS (2019)
Grey Regulatory Focus Theory Weighting Method for the Multi-Criteria Decision-Making Problem in Evaluating University Reputation
Moses Olabhele Esangbedo et al.
SYMMETRY-BASEL (2019)
Carbon materials and their composites for electromagnetic interference shielding effectiveness in X-band
Shivam Gupta et al.
CARBON (2019)
The nexus between air pollution, green infrastructure and human health
Prashant Kumar et al.
ENVIRONMENT INTERNATIONAL (2019)
Impact behaviour of hybrid composites for structural applications: A review
Syafiqah Nur Azrie Safri et al.
COMPOSITES PART B-ENGINEERING (2018)
Multi-Response Optimization of Resin Finishing by Using a Taguchi-Based Grey Relational Analysis
Md. Nahid Pervez et al.
MATERIALS (2018)
Super Abrasive Machining of Integral Rotary Components Using Grinding Flank Tools
Haizea Gonzalez et al.
METALS (2018)
Taguchi Grey Relational Analysis for Multi-Response Optimization of Wear in Co-Continuous Composite
Prasanth Achuthamenon Sylajakumari et al.
MATERIALS (2018)
A TOPSIS-Based Taguchi Design to Investigate Optimum Mixture Proportions of Graphene Oxide Powder Synthesized by Hummers Method
Haluk Korucu et al.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2018)
Multi-objective robust optimization of multi-directional carbon/glass fibre-reinforced hybrid composites with manufacture related uncertainties under flexural loading
Mehdi Kalantari et al.
COMPOSITE STRUCTURES (2017)
Multi-response optimization of wire electrical discharge machining process parameters for Al7075/Al2O3/SiC hybrid composite using Taguchi-based grey relational analysis
Shyam Lal et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2015)
The Effect of Cutting Speed and Depth of Cut on Surface Roughness During Machining of Austempered Ductile Iron
Prashant Parhad et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2015)
Potential materials for food packaging from nanoclay/natural fibres filled hybrid composites
K. Majeed et al.
MATERIALS & DESIGN (2013)
Effect of Machining Parameters on Cutting Forces and Surface Roughness in Al-(1-2) Fe-1V-1Si Alloys
B. N. Pathak et al.
MATERIALS AND MANUFACTURING PROCESSES (2013)
An integrated evolutionary approach for modelling and optimisation of CNC end milling process
D. Kondayya et al.
INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING (2012)
Microstructural, mechanical, and thermal characteristics of recycled cellulose fiber-halloysite-epoxy hybrid nanocomposites
H. Alamri et al.
POLYMER COMPOSITES (2012)
Use of the Taguchi method and grey relational analysis to optimize turning operations with multiple performance characteristics
CL Lin
MATERIALS AND MANUFACTURING PROCESSES (2004)