Related references
Note: Only part of the references are listed.Present status and future directions: Canal shaping
Ana Arias et al.
INTERNATIONAL ENDODONTIC JOURNAL (2022)
Effect of kinematics on the torque/force generation, surface characteristics, and shaping ability of a nickel-titanium rotary glide path instrument: An ex vivo study
Moe S. Kyaw et al.
INTERNATIONAL ENDODONTIC JOURNAL (2022)
The Effect of Different Molar Access Cavity Designs on Root Canal Shaping Times Using Rotation and Reciprocation Instruments in Mandibular First Molars
Martin Vorster et al.
JOURNAL OF ENDODONTICS (2022)
A Multimethod Assessment of a New Customized Heat-Treated Nickel-Titanium Rotary File System
Emmanuel J. N. L. Silva et al.
MATERIALS (2022)
Cyclic fatigue resistance for six types of nickel titanium instruments at artificial canals with different angles and radii of curvature
Danlu Chi et al.
DENTAL MATERIALS JOURNAL (2021)
The Effect of Taper and Apical Diameter on the Cyclic Fatigue Resistance of Rotary Endodontic Files Using an Experimental Electronic Device
Vicente Faus-Llacer et al.
APPLIED SCIENCES-BASEL (2021)
Micro-computed Evaluation of Canal Transportation and Centering Ability of 5 Rotary and Reciprocating Systems with Different Metallurgical Properties and Surface Treatments in Curved Root Canals
Emina Kabil et al.
JOURNAL OF ENDODONTICS (2021)
Effect of Core Mass and Alloy on Cyclic Fatigue Resistance of Different Nickel-Titanium Endodontic Instruments in Matching Artificial Canals
Sebastian Buerklein et al.
MATERIALS (2021)
Comparison of the canal transportation of ProTaper GOLD, WaveOne GOLD, and TruNatomy in simulated double-curved canals
HyeWon Kim et al.
BMC ORAL HEALTH (2021)
Evaluating In Vitro Performance of Novel Nickel-Titanium Rotary System (TruNatomy) Based on Debris Extrusion and Preparation Time from Severely Curved Canals
Ruba Mustafa et al.
JOURNAL OF ENDODONTICS (2021)
Analysis of Torque and Force Induced by Rotary Nickel-Titanium Instruments during Root Canal Preparation: A Systematic Review
Myint Thu et al.
APPLIED SCIENCES-BASEL (2021)
Comparative evaluation of mechanical properties and shaping performance of heat-treated nickel titanium rotary instruments used in the single-length technique
Taro Nakatsukasa et al.
DENTAL MATERIALS JOURNAL (2021)
Comparison of torque, force generation and canal shaping ability between manual and nickel-titanium glide path instruments in rotary and optimum glide path motion
Pyae Hein Htun et al.
ODONTOLOGY (2020)
Enhanced root canal-centering ability and reduced screw-in force generation of reciprocating nickel-titanium instruments with a post-machining thermal treatment
Keiichiro Maki et al.
DENTAL MATERIALS JOURNAL (2020)
Effect of Optimum Torque Reverse Motion on Torque and Force Generation during Root Canal Instrumentation with Crown-down and Single-length Techniques
Shunsuke Kimura et al.
JOURNAL OF ENDODONTICS (2020)
In vitro comparison of cyclic fatigue resistance of TruNatomy in single and double curvature canals compared with different nickel-titanium rotary instruments
Amr M. Elnaghy et al.
BMC ORAL HEALTH (2020)
Mechanical Properties of a Novel Nickel-titanium Root Canal Instrument: Stationary and Dynamic Tests
Ove A. Peters et al.
JOURNAL OF ENDODONTICS (2020)
Cyclic Fatigue Resistance of Rotary and Reciprocating Nickel-Titanium Instruments Subjected to Static and Dynamic Tests
Myint Thu et al.
JOURNAL OF ENDODONTICS (2020)
Shaping ability of reciprocating single-file systems in severely curved canals: WaveOne and Reciproc versus WaveOne Gold and Reciproc blue
Sebastian Buerklein et al.
ODONTOLOGY (2019)
Assessment of mechanical properties of WaveOne Gold Primary reciprocating instruments
Tong Fangli et al.
DENTAL MATERIALS JOURNAL (2019)
Comparison of Screw-In Forces during Movement of Endodontic Files with Different Geometries, Alloys, and Kinetics
Sang Won Kwak et al.
MATERIALS (2019)
Influence of static and dynamic cyclic fatigue tests on the lifespan of four reciprocating systems at different temperatures
A. Keles et al.
INTERNATIONAL ENDODONTIC JOURNAL (2019)
Effect of Different Speeds of Up-and-down Motion on Canal Centering Ability and Vertical Force and Torque Generation of Nickel-titanium Rotary Instruments
Keiichiro Maki et al.
JOURNAL OF ENDODONTICS (2019)
Evaluation of apical transportation and centring ability of five thermally treated NiTi rotary systems
S. R. Pinheiro et al.
INTERNATIONAL ENDODONTIC JOURNAL (2018)
Comparative analysis of mechanical properties of differently tapered nickel-titanium endodontic rotary instruments
Yohei Fukumori et al.
DENTAL MATERIALS JOURNAL (2018)
New thermomechanically treated NiTi alloys - a review
J. Zupanc et al.
INTERNATIONAL ENDODONTIC JOURNAL (2018)
Correlation between Temperature-dependent Fatigue Resistance and Differential Scanning Calorimetry Analysis for 2 Contemporary Rotary Instruments
Ana Arias et al.
JOURNAL OF ENDODONTICS (2018)
Structural analysis of HyFlex EDM instruments
F. Iacono et al.
INTERNATIONAL ENDODONTIC JOURNAL (2017)
Dynamic Torque and Vertical Force Analysis during Nickel-titanium Rotary Root Canal Preparation with Different Modes of Reciprocal Rotation
Daisuke Tokita et al.
JOURNAL OF ENDODONTICS (2017)
Comparison of ProTaper Next and HyFlex instruments on apical debris extrusion in curved canals
M. M. Kocak et al.
INTERNATIONAL ENDODONTIC JOURNAL (2016)
HyFlex EDM: superficial features, metallurgical analysis and fatigue resistance of innovative electro discharge machined NiTi rotary instruments
C. Pirani et al.
INTERNATIONAL ENDODONTIC JOURNAL (2016)
Effects of Pitch Length and Heat Treatment on the Mechanical Properties of the Glide Path Preparation Instruments
Sang Won Kwak et al.
JOURNAL OF ENDODONTICS (2016)
Torsional and Cyclic Fatigue Resistance of a New Nickel-Titanium Instrument Manufactured by Electrical Discharge Machining
Eugenio Pedulla et al.
JOURNAL OF ENDODONTICS (2016)
Phase Transformation Behavior and Resistance to Bending and Cyclic Fatigue of ProTaper Gold and ProTaper Universal Instruments
Ahmed Hieawy et al.
JOURNAL OF ENDODONTICS (2015)
'Screw-in' tendency of rotary nickel-titanium files due to design geometry
J. H. Ha et al.
INTERNATIONAL ENDODONTIC JOURNAL (2015)
Minimally invasive endodontics: challenging prevailing paradigms
A. H. Gluskin et al.
BRITISH DENTAL JOURNAL (2014)
The influence of heat treatment on the mechanical properties of Ni-Ti file materials
Kana Miyara et al.
DENTAL MATERIALS JOURNAL (2014)
Mechanical behavior of M-Wire and conventional NiTi wire used to manufacture rotary endodontic instruments
Erika S. J. Pereira et al.
DENTAL MATERIALS (2013)
Current Challenges and Concepts of the Thermomechanical Treatment of Nickel-Titanium Instruments
Ya Shen et al.
JOURNAL OF ENDODONTICS (2013)
Fatigue Life of Reciproc and Mtwo Instruments Subjected to Static and Dynamic Tests
Helio P. Lopes et al.
JOURNAL OF ENDODONTICS (2013)
Flexural Stiffness and Stresses in Nickel-Titanium Rotary Files for Various Pitch and Cross-sectional Geometries
Antheunis Versluis et al.
JOURNAL OF ENDODONTICS (2012)
Heat treatment of nickel-titanium rotary endodontic instruments: effects on bending properties and shaping abilities
A. Ebihara et al.
INTERNATIONAL ENDODONTIC JOURNAL (2011)
Extended cyclic fatigue life of F2 ProTaper instruments used in reciprocating movement
G. De-Deus et al.
INTERNATIONAL ENDODONTIC JOURNAL (2010)
Identifying and Reducing Risks for Potential Fractures in Endodontically Treated Teeth
Weirong Tang et al.
JOURNAL OF ENDODONTICS (2010)
Relationship between flexibility and physical, chemical, and geometric characteristics of rotary nickel-titanium instruments
Ana Cecilia Diniz Viana et al.
ORAL SURGERY ORAL MEDICINE ORAL PATHOLOGY ORAL RADIOLOGY AND ENDODONTOLOGY (2010)
Effect of heat treatment on transformation temperatures and bending properties of nickel-titanium endodontic instruments
Y. Yahata et al.
INTERNATIONAL ENDODONTIC JOURNAL (2009)
How does canal taper affect root stresses?
BD Rundquist et al.
INTERNATIONAL ENDODONTIC JOURNAL (2006)
Influence of phase transformation on the torsional and bending properties of nickel-titanium rotary endodontic instruments
K Miyai et al.
INTERNATIONAL ENDODONTIC JOURNAL (2006)
Cyclic fatigue of three types of rotary nickel-titanium files in a dynamic model
JH Yao et al.
JOURNAL OF ENDODONTICS (2006)
Current challenges and concepts in the preparation of root canal systems: A review
OA Peters
JOURNAL OF ENDODONTICS (2004)
Torque during canal instrumentation using rotary nickel-titanium files
B Sattapan et al.
JOURNAL OF ENDODONTICS (2000)
Share Paper
