☆ 4.5 Article

Dynamic Stiffness Matrix With Timoshenko Beam Theory and Linear Frequency Solution for Use in Compliant Mechanisms

JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Bulk metallic glass cantilever beams: Outstanding at large-deflection deformation and their application in complaint mechanisms

Diao-Feng Li et al.

Summary: This study proposes an effective design strategy to enhance the flexibility of bulk metallic glass (BMG) cantilever beams and identifies the influencing factor affecting the accuracy of bending modulus of elasticity. The critical boundary condition for small-deflection deformation is determined, providing a criterion to predict the potential for achieving large-deflection deformation. BMG cantilever beams exhibit unique advantages in achieving large-deflection deformation and enduring higher flexural stress, making them well-suited for compliant mechanisms in microelectromechanical systems and biomedicine applications.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Design and analysis of a two-degrees-of-freedom monolithic compliant piezoelectric microgripper

Shuaiguan Song et al.

Summary: This paper presents the design, modeling, and testing of a compliant two-degrees-of-freedom microgripper using a single piezoelectric actuator. It can move along the x- and y-directions by combining double-leaf bridge and parallelogram mechanisms. The feasibility of the theoretical model and simulation analysis are validated through experimental results.

JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2022)

Add to Collection

Article Engineering, Mechanical

A Large Range Compliant Nano-Manipulator Supporting Electron Beam Lithography

Yijie Liu et al.

Summary: In this paper, a large range compliant nano-manipulator is proposed to address the stitching error issue in electron beam lithography (EBL). Experimental results demonstrate that the manipulator has high precision, linearity, and resolution, making it suitable for EBL applications in a vacuum environment.

JOURNAL OF MECHANICAL DESIGN (2022)

Add to Collection

Article Engineering, Mechanical

Analysis and design of spatial compliant mechanisms using a 3-D dynamic stiffness model

Mingxiang Ling et al.

Summary: A method that combines a three-dimensional dynamic stiffness model with Pareto multi-objective optimization strategy for analyzing and designing spatial compliant mechanisms is introduced. The experiment results demonstrate the excellent performance of the designed piezoelectric tilting manipulator in motion degrees of freedom.

MECHANISM AND MACHINE THEORY (2022)

Add to Collection

Article Engineering, Electrical & Electronic

Design and analysis of a novel piezoelectric inertial actuator with large stepping displacement amplified by compliant mechanism

Xiaoqing Sun et al.

Summary: A novel piezoelectric inertial actuator was developed in this paper to meet the requirements of large stroke and high output displacement accuracy. By optimizing the compliant driving foot and adjustment device, the effectiveness of the actuator was verified through theoretical modeling, finite element analysis, and experimental tests. The compliant driving foot and payload adjustment device show potential in the development of miniaturized and integrated smart material actuators.

MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2022)

Add to Collection

Article Instruments & Instrumentation

Fuzzy sliding mode control of piezo-driven stage

Jiwen Fang et al.

Summary: By utilizing a motion stage with flexible hinges and a PZT actuator, nanometer-level precision positioning is achieved. Mechanical characteristics are analyzed using a double-parallel four-bar mechanism and finite element method, with parameters identified using a particle swarm optimization algorithm for the Bouc-Wen hysteresis model. A PID-type fuzzy sliding mode control is designed to reduce hysteresis influence, which proves effective through experiments.

REVIEW OF SCIENTIFIC INSTRUMENTS (2022)

Add to Collection

Article Chemistry, Analytical

Design and Modeling of a Curved Beam Compliant Mechanism with Six Degrees of Freedom

Sheng Lin et al.

Summary: Compliant mechanisms are widely used in various cutting-edge scientific and technological fields. This study proposes a compliant mechanism with six degrees of freedom based on curved beams, which has the advantages of a simple structure and multi-degree-of-freedom. A model of the mechanism is constructed using the isogeometric analysis method, and static analysis shows the generation of six degrees of freedom. A prototype is developed using 3D printing, and a loading test in six degrees of freedom is carried out, showing high linear relations between output and input and low inter-directional coupling of the structure.

MICROMACHINES (2022)

Add to Collection

Article Engineering, Multidisciplinary

On geometrically nonlinear mechanics of nanocomposite beams

Marzia Sara Vaccaro

Summary: This paper provides a consistent methodology of integral elasticity to address applicative problems of nanocomposite beams undergoing large configuration changes. The constitutive properties of nanofillers are experimentally validated and the effects of nanofillers on size-dependent structural responses are numerically investigated.

INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE (2022)

Add to Collection

Article Engineering, Electrical & Electronic

Design, analysis and evaluation of a self-lockable constant-force compliant gripper

Pengbo Liu et al.

Summary: In this paper, a novel constant-force compliant gripper with clamp state locking capability is developed. It utilizes a symmetric compliant slider-crank mechanism to maintain a constant gripping force and a multi-stable module for gripping state locking.

SENSORS AND ACTUATORS A-PHYSICAL (2022)

Add to Collection

Article Engineering, Mechanical

Nonlinear Analysis of a Class of Inversion-Based Compliant Cross-Spring Pivots

Shiyao Li et al.

Summary: This article presents a nonlinear model of an inversion-based generalized cross-spring pivot (IG-CSP), which can be employed for geometric error analysis and characteristic analysis. The effects of load-dependent factors, such as loading positions, geometric parameters, and axial forces, are investigated. The load-rotation relationships and center shifts of different types of cross-spring pivots are derived and compared. Furthermore, two new compound symmetric cross-spring pivots are proposed and analyzed.

JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME (2022)

Add to Collection

Article Robotics

Compliant gripper design, prototyping, and modeling using screw theory formulation

Irfan Hussain et al.

Summary: This article investigates the design, modeling, prototyping, and testing of soft-rigid tendon-driven grippers, using the design and development of a two-finger soft gripper as a case study. A mathematical formulation based on screw theory is proposed to model gripper dynamics, allowing for different behaviors to be achieved by varying the properties of its passive deformable joints. Experiments with a prototype and an optical tracking system were conducted to validate the proposed mathematical formulation and to assess the gripper's performance in terms of payload, maximum horizontal resisted force, and grasping capabilities.

INTERNATIONAL JOURNAL OF ROBOTICS RESEARCH (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Piezoelectrically Actuated Fast Mechanical Switch for MVDC Protection

Chunmeng Xu et al.

Summary: This paper presents a prototype of a 15 kV-class piezoelectrically actuated fast mechanical switch, which demonstrates fast, reliable, and controllable characteristics. This switch is expected to be widely used in MVDC systems such as electric ships, electric aircraft, and microgrids.

IEEE TRANSACTIONS ON POWER DELIVERY (2021)

Add to Collection

Review Engineering, Mechanical

Surgical Applications of Compliant Mechanisms: A Review

Theodosia Lourdes Thomas et al.

Summary: The article discusses the current status and advantages of using compliant mechanisms (CMs) in surgical interventions, as well as the five important aspects to consider when developing surgical devices. The five major groups of surgical applications of CMs are also evaluated.

JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME (2021)

Add to Collection

Article Engineering, Mechanical

Kinetostatic Modeling of Dual-Drive H-Type Gantry With Exchangeable Flexure Joints

Silu Chen et al.

Summary: A generalized analytical kinetostatic model of flexure-linked DHG is proposed in this study, capable of accurately estimating the rotation angle of the cross-arm, the misalignment of two carriages, and the net driving force. Simulations and experiments validate the accuracy and practical appeals of the model.

JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME (2021)

Add to Collection

Article Instruments & Instrumentation

A versatile flexure-based six-axis force/torque sensor and its application to tribology

M. Guibert et al.

Summary: This article introduces a flexure-based design for six-axis force/torque sensors, which addresses some drawbacks of existing designs. The sensor is backlash-free, wirelessly monitored, enforces exact 90 degrees angles between axes, and enables visual inspection of the monitored system. It is demonstrated through examples relevant to tribology field.

REVIEW OF SCIENTIFIC INSTRUMENTS (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Design and modeling of an improved bridge-type compliant mechanism with its application for hydraulic piezo-valves

Mingxiang Ling et al.

Summary: In this paper, an improved bridge-type compliant mechanism with double output ports is presented, which can generate homodromous bi-motions actuated by only one group of piezo-stacks to avoid inertial motion and enhance dynamic bandwidth. The mechanism's dynamic characteristics are captured through a two-port dynamic stiffness model, allowing for optimal performance confirmation. This mechanism is further applied to develop a piezoelectric two-stage flow control valve with fast dynamic response and large flow rate, effectively overcoming issues of inner leakage and oil contamination.

SENSORS AND ACTUATORS A-PHYSICAL (2021)

Add to Collection

Review Mechanics

Kinetostatic and Dynamic Modeling of Flexure-Based Compliant Mechanisms: A Survey

Mingxiang Ling et al.

APPLIED MECHANICS REVIEWS (2020)

Add to Collection

Review Engineering, Mechanical

Design of compliant mechanisms using continuum topology optimization: A review

Benliang Zhu et al.

MECHANISM AND MACHINE THEORY (2020)

Add to Collection

Article Instruments & Instrumentation

Design, analysis, and experimental investigation of a single-stage and low parasitic motion piezoelectric actuated microgripper

Tilok Kumar Das et al.

SMART MATERIALS AND STRUCTURES (2020)

Add to Collection

Article Automation & Control Systems

Development and control of a large range XY⊖ micropositioning stage

Ammar Al-Jodah et al.

MECHATRONICS (2020)

Add to Collection

Article Automation & Control Systems

Design, Analysis, and Control of an XY Parallel Nanomanipulator With Multiple Actuation Modes

Xu Yang et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2020)

Add to Collection

Article Engineering, Electrical & Electronic

Design and optimisation of an underfloor energy harvesting system

Matthew Evans et al.

SENSORS AND ACTUATORS A-PHYSICAL (2019)

Add to Collection

Article Engineering, Mechanical

An energy-based approach for kinetostatic modeling of general compliant mechanisms

Shilei Wu et al.

MECHANISM AND MACHINE THEORY (2019)

Add to Collection

Article Engineering, Multidisciplinary

A semi-analytical modeling method for the static and dynamic analysis of complex compliant mechanism

Mingxiang Ling et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2018)

Add to Collection

Article Engineering, Mechanical

A Pseudo-Static Model for Dynamic Analysis on Frequency Domain of Distributed Compliant Mechanisms

Mingxiang Ling et al.

JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME (2018)

Add to Collection

Article Engineering, Mechanical

detasFLEX - A computational design tool for the analysis of various notch flexure hinges based on non-linear modeling

Stefan Henning et al.

MECHANICAL SCIENCES (2018)

Add to Collection

Article Automation & Control Systems

A compliant dual-axis gripper with integrated position and force sensing

Weihai Chen et al.

MECHATRONICS (2017)

Add to Collection

Article Engineering, Mechanical

Accuracy Assessment of Pseudo-Rigid-Body Model for Dynamic Analysis of Compliant Mechanisms

Na Li et al.

JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME (2017)

Add to Collection

Article Engineering, Mechanical

Pseudo-Rigid-Body Model for the Flexural Beam With an Inflection Point in Compliant Mechanisms

Shun-Kun Zhu et al.

JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME (2017)

Add to Collection

Article Engineering, Mechanical

Design, analysis and simulation of a novel 3-DOF translational micromanipulator based on the PRB model

Yangmin Li et al.

MECHANISM AND MACHINE THEORY (2016)

Add to Collection

Article Engineering, Mechanical

A Three-Spring Pseudorigid-Body Model for Soft Joints With Significant Elongation Effects

Venkatasubramanian Kalpathy Venkiteswaran et al.

JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME (2016)

Add to Collection

Article Instruments & Instrumentation

A generalized analytical compliance model for cartwheel flexure hinges

Jianwei Wu et al.

REVIEW OF SCIENTIFIC INSTRUMENTS (2015)

Add to Collection

Article Engineering, Mechanical

Kinetostatic Modeling of Fully Compliant Bistable Mechanisms Using Timoshenko Beam Constraint Model

Guimin Chen et al.

JOURNAL OF MECHANICAL DESIGN (2015)

Add to Collection

Article Engineering, Mechanical

New empirical stiffness equations for corner-filleted flexure hinges

Q. Meng et al.

MECHANICAL SCIENCES (2013)

Add to Collection

Article Instruments & Instrumentation

A generalized analytical compliance model for transversely symmetric three-segment flexure hinges

Nicolae Lobontiu et al.

REVIEW OF SCIENTIFIC INSTRUMENTS (2011)

Add to Collection

Article Engineering, Mechanical

On mechanical properties of planar flexure hinges of compliant mechanisms

F. Dirksen et al.

MECHANICAL SCIENCES (2011)

Add to Collection

Article Engineering, Mechanical

Elastic Averaging in Flexure Mechanisms: A Three-Beam Parallelogram Flexure Case Study

Shorya Awtar et al.

JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME (2010)

Add to Collection

Article Engineering, Mechanical

A Screw Theory Approach for the Conceptual Design of Flexible Joints for Compliant Mechanisms

Hai-Jun Su et al.

JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME (2009)

Add to Collection

Review Engineering, Multidisciplinary

Review of circular flexure hinge design equations and derivation of empirical formulations

Yuen Kuan Yong et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2008)

Add to Collection

Article Engineering, Mechanical

A magnification device for precision mechanisms featuring piezoactuators and flexure hinges: Design and experimental validation

S. B. Choi et al.

MECHANISM AND MACHINE THEORY (2007)

Add to Collection

Article Acoustics

Dynamic stiffness formulation and its application for a combined beam and a two degree-of-freedom system

JR Banerjee

JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.