☆ 4.5 Article

Mobility and Kinematic Bifurcation Analysis of Origami Plate Structures

JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Mechanical

Folding Responses of Origami-Inspired Structures Connected by Groove Compliant Joints

Qian Zhang et al.

Summary: In this paper, a new type of compliant joint is designed and its performances are studied through parameter analysis and optimization, showing that it can effectively control the behavior and configuration of mechanisms. The study also finds that origami-inspired structures have a high residual stiffness.

JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME (2022)

Add to Collection

Article Engineering, Mechanical

Analytical model and general calculation procedure for wrinkled membrane parameters

Qian Zhang et al.

Summary: This paper proposes a mechanical model with the prestress and deflection based on Foppl-von Karman equations, and introduces nonlinear buckling finite element analysis and experiments to determine key parameters. The proposed model shows accurate predictive ability for stress and configuration parameters of wrinkles, and a general calculation procedure for wrinkle parameters of complex membranes is established.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)

Add to Collection

Article Engineering, Mechanical

Theoretical characterization of a non-rigid-foldable square-twist origami for property programmability

Jiayao Ma et al.

Summary: This study introduces a theoretical model to characterize and predict the behavior of non-rigid-foldable square-twist origami patterns, revealing a bifurcated deformation path and verifying it through experiments. Additionally, it explores programming the mechanical properties of the structure by adjusting the geometrical parameters and material stiffness.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

Add to Collection

Article Engineering, Aerospace

Packaging of thick membranes using a multi-spiral folding approach: Flat and curved surfaces

Victor Parque et al.

Summary: This paper investigates the deployment performance of multiple spiral folding schemes for packaging flat and curved membranes of finite thickness. Experimental results show that the multi-spiral approach with prismatic folding lines offers improved deployment performance and rapid progress in the deployment of curved surfaces. This approach has the potential to extend the versatility and maneuverability of spiral folding mechanisms.

ADVANCES IN SPACE RESEARCH (2021)

Add to Collection

Article Engineering, Aerospace

Modified spiral folding pattern for deployable membranes

P. M. Liyanage et al.

Summary: Solar sails offer propellant-free propulsion for small spacecraft and require deployable concepts. Neglecting the geometric effects of membrane thickness in stored configuration can lead to plastic deformations and wrinkling, prompting the development of a modified fold-line arrangement to address these issues.

AEROSPACE SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Engineering, Mechanical

Origami-based cellular mechanical metamaterials with tunable Poisson's ratio: Construction and analysis

Shengnan Lyu et al.

Summary: This paper introduces a novel family of cellular mechanical metamaterials based on rigid foldable square-twist origami, with tunable Poisson's ratios achieved by adjusting design factors. The kinematics, rigid-foldability, and influences of various combination schemes on in-plane and out-plane Poisson's ratios of square-twist origami are studied. Following a mapping relationship between design factors and Poisson's ratio, cellular mechanical metamaterials with tunable Poisson's ratios can be designed for engineering applications.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

Add to Collection

Article Engineering, Mechanical

Thick-panel Origami Cube

Yuanqing Gu et al.

Summary: This paper presents a new method for constructing a novel thick-panel origami cube by replacing the equivalent 4 R-spherical linkage with a plane-symmetric Bricard linkage. The proposed thick-panel vertex preserves the kinematics of the original four-crease origami vertex and is used to construct a thick-panel cube based on a zero-thickness origami cube. Through mechanism decomposition and investigation of geometric constraints and kinematic properties, the study reveals the kinematic equivalence between the thick-panel and zero-thickness forms of the origami cube, with potential applications in aerospace exploration, robotics, and architecture.

MECHANISM AND MACHINE THEORY (2021)

Add to Collection

Article Construction & Building Technology

Development of kinetic origami canopy using Arc Miura folding patterns

Qian Zhang et al.

Summary: The paper investigates the design and kinematic behavior of a novel origami canopy, demonstrating its design process and performance evaluation results. It proposes a calculated method to determine geometry parameters with different constraint conditions for different target configurations. The study opens a novel avenue for the design of curved shapes using Miura-ori in various fields.

JOURNAL OF BUILDING ENGINEERING (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Engineering Origami: A Comprehensive Review of Recent Applications, Design Methods, and Tools

Marco Meloni et al.

Summary: Origami-based designs involve applying the ancient art of origami to solve engineering problems, with a focus on cross-disciplinary interest. This article reviews recent origami-based applications in engineering, design methods and tools in various fields, and discusses future challenges and open questions.

ADVANCED SCIENCE (2021)

Add to Collection

Article Engineering, Mechanical

Design and Kinematics of a Novel Double-Ring Truss Deployable Antenna Mechanism

Wen-ao Cao et al.

Summary: This paper introduces a novel double-ring truss deployable satellite antenna mechanism, presenting the design and analysis of its topological structure. By proposing new topological schemes and rectangular prism deployable linkage units, analyzing the degree-of-freedom of the mechanism, establishing a kinematic model, and demonstrating the effectiveness through a numerical example, the study highlights the structural symmetry and simplified joint axis layouts of the mechanism compared to existing designs.

JOURNAL OF MECHANICAL DESIGN (2021)

Add to Collection

Article Engineering, Mechanical

Design and analysis of a novel deployable hexagonal prism module for parabolic cylinder antenna

Xiaofei Ma et al.

Summary: This paper introduces a novel deployable hexagonal prism module for parabolic cylinder antennas with characteristics of geometric scalability. The design of basic rib mechanisms along the axis and parabolic directions ensures synchronized and coordinated movement during the deployment process, as verified through simulations and experiments.

MECHANICAL SCIENCES (2021)

Add to Collection

Article Engineering, Mechanical

Degree of Freedom and Dynamic Analysis of the Multi-Loop Coupled Passive-Input Overconstrained Deployable Tetrahedral Mechanisms for Truss Antennas

Yundou Xu et al.

JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME (2020)

Add to Collection

Article Engineering, Mechanical

Conditions for Rigid and Flat Foldability of Degree-n Vertices in Origami

Luca Zimmermann et al.

JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME (2020)

Add to Collection

Article Mechanics

Folding simulation of rigid origami with Lagrange multiplier method

Yucai Hu et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2020)

Add to Collection

Article Engineering, Mechanical

Rigid foldability and mountain-valley crease assignments of square-twist origami pattern

Huijuan Feng et al.

MECHANISM AND MACHINE THEORY (2020)

Add to Collection

Article Multidisciplinary Sciences

Lightweight rigidly foldable canopy using composite materials

Kensuke Ando et al.

SN APPLIED SCIENCES (2020)

Add to Collection

Article Physics, Fluids & Plasmas

Helical Miura origami

Fan Feng et al.

PHYSICAL REVIEW E (2020)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Modeling and Kinematic Path Selection of Retractable Kirigami Roof Structures

Jianguo Cai et al.

COMPUTER-AIDED CIVIL AND INFRASTRUCTURE ENGINEERING (2019)

Add to Collection

Article Engineering, Mechanical

Mobile assemblies of four-spherical-4R-integrated linkages and the associated four-crease-integrated rigid origami patterns

Yan Chen et al.

MECHANISM AND MACHINE THEORY (2019)

Add to Collection

Article Mechanics

Lower-order symmetric mechanism modes and bifurcation behavior of deployable bar structures with cyclic symmetry

Yao Chen et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2018)

Add to Collection

Article Mechanics

Truss-based nonlinear mechanical analysis for origami structures exhibiting bifurcation and limit point instabilities

A. Gillman et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2018)

Add to Collection

Article Thermodynamics

A method of calculating the degree of freedom of foldable plate rigid origami with adjacency matrix

Hongying Yu et al.

ADVANCES IN MECHANICAL ENGINEERING (2018)

Add to Collection

Article Engineering, Mechanical

A folding analysis method for origami based on the frame with kinematic indeterminacy

Tianhao Zhang et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)

Add to Collection

Article Engineering, Mechanical

An Approach to Designing Origami-Adapted Aerospace Mechanisms

Jessica Morgan et al.

JOURNAL OF MECHANICAL DESIGN (2016)

Add to Collection

Article Multidisciplinary Sciences

Origami tubes with reconfigurable polygonal cross-sections

E. T. Filipov et al.

PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2016)

Add to Collection

Article Multidisciplinary Sciences

A three-dimensional actuated origami-inspired transformable metamaterial with multiple degrees of freedom

Johannes T. B. Overvelde et al.

NATURE COMMUNICATIONS (2016)

Add to Collection

Article Physics, Fluids & Plasmas

Origami building blocks: Generic and special four-vertices

Scott Waitukaitis et al.

PHYSICAL REVIEW E (2016)

Add to Collection

Article Engineering, Civil

Geometric assembly of rigid-foldable morphing sandwich structures

J. M. Gattas et al.

ENGINEERING STRUCTURES (2015)

Add to Collection

Article Physics, Multidisciplinary

Origami Multistability: From Single Vertices to Metasheets

Scott Waitukaitis et al.

PHYSICAL REVIEW LETTERS (2015)

Add to Collection

Article Instruments & Instrumentation

Geometric design and mechanical behavior of a deployable cylinder with Miura origami

Jianguo Cai et al.

SMART MATERIALS AND STRUCTURES (2015)

Add to Collection

Article Engineering, Mechanical

Origami-Inspired Integrated Planar-Spherical Overconstrained Mechanisms

Guowu Wei et al.

JOURNAL OF MECHANICAL DESIGN (2014)

Add to Collection

Article Engineering, Mechanical

Synthesis, Mobility, and Multifurcation of Deployable Polyhedral Mechanisms With Radially Reciprocating Motion

Guowu Wei et al.

JOURNAL OF MECHANICAL DESIGN (2014)

Add to Collection

Article Engineering, Mechanical

Miura-Base Rigid Origami: Parameterizations of First-Level Derivative and Piecewise Geometries

Joseph M. Gattas et al.

JOURNAL OF MECHANICAL DESIGN (2013)

Add to Collection

Article Engineering, Mechanical

Design and Analysis of a Foldable/Unfoldable Corrugated Architectural Curved Envelop

Francesco Gioia et al.

JOURNAL OF MECHANICAL DESIGN (2012)

Add to Collection

Article Engineering, Mechanical

Numerical approach to the kinematic analysis of deployable structures forming a closed loop

W. W. Gan et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2006)

Add to Collection

Article Mechanics

Threefold-symmetric Bricard linkages for deployable structures

Y Chen et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2005)

Add to Collection

Article Mechanics

Computation of kinematic paths and bifurcation points

P Kumar et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.