4.6 Article

Hydrogen production by graphdiyne (CnH2n-2)-based graphdiyne/CuI/NiMn(LDHs) double S-scheme heterojunctions

Related references

Note: Only part of the references are listed.
Article Chemistry, Multidisciplinary

2D CeO2 and a Partially Phosphated 2D Ni-Based Metal-Organic Framework Formed an S-Scheme Heterojunction for Efficient Photocatalytic Hydrogen Evolution

Haiming Gong et al.

Summary: An S-scheme heterojunction was constructed by modifying the surface of Ni-based metal-organic framework (Ni-MOF) through different in situ treatment strategies. The in situ formation of NiS2, NiO, and Ni2P on the Ni-MOF surface improved the hydrogen production activity by accepting electrons from the conduction band of Ni-MOF. Coupling 2D CeO2 with Ni-MOF/P successfully built the S-scheme heterojunction, leading to a significantly higher hydrogen production rate.

LANGMUIR (2022)

Article Materials Science, Multidisciplinary

Comparative study of metal oxides and phosphate modification with different mechanisms over g-C3N4 for visible-light photocatalytic degradation of metribuzin

Rui Yan et al.

Summary: A comparative study of three modification techniques for g-C3N4 nanosheets for the photocatalytic degradation of MET was conducted. The TO/CN nanocomposite showed the highest photocatalytic activity for MET degradation.

RARE METALS (2022)

Article Chemistry, Physical

Construction of a tandem S-scheme GDY/CuI/CdS-R heterostructure based on morphology-regulated graphdiyne (g-CnH2n-2) for enhanced photocatalytic hydrogen evolution

Zhiliang Jin et al.

Summary: Graphdiyne (GDY), as a new two-dimensional carbon hybrid material, has garnered attention for its good conductivity, adjustable electronic structure, and unique electron transfer enhancement properties, showing great potential in the field of photocatalytic hydrogen evolution by water splitting. This study successfully prepared GDY using the cross-coupling method and obtained 0.05CIGCS-R with excellent photocatalytic performance through morphology modulation. The photocatalytic hydrogen evolution rates of 0.05CIGCS-R were significantly higher than those of pure GDY and CdS-R, showcasing the promising application of GDY in photocatalysis and the construction of a tandem S-scheme heterojunction.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Article Materials Science, Multidisciplinary

Graphdiyne based GDY/CuI/NiO parallel double S-scheme heterojunction for efficient photocatalytic hydrogen evolution

Zhiliang Jin et al.

Summary: This study constructed a GDY/CuI/NiO heterostructure photocatalytic system and demonstrated its excellent photocatalytic performance and stability. Amorphous GDY provided more active sites for hydrogen evolution, while the construction of heterojunction promoted electron transfer and played a crucial role in enhancing hydrogen production activity.

2D MATERIALS (2022)

Article Chemistry, Physical

Novel p- and n-type S-scheme heterojunction photocatalyst for boosted CO2 photoreduction activity

Xinxin Han et al.

Summary: This study reports a layered double hydroxide-based photocatalyst that achieves CO2 photoreduction by utilizing an internally built-in electric field, resulting in a high CO yield rate.

APPLIED CATALYSIS B-ENVIRONMENTAL (2022)

Article Chemistry, Multidisciplinary

Construct 3D NiCo-LDH/Cu2O p-n heterojunction via electrostatic self-assembly for enhanced photocatalytic hydrogen evolution

Zhaobo Fan et al.

Summary: The hydrogen evolution of inorganic photocatalysts is a hot research topic. By constructing p-n type heterojunctions, an internal electric field is formed to prevent charge diffusion and promote the migration of photocarriers. The two-dimensional thin sheet structure of flower cluster NiCo-LDH prevents the agglomeration of Cu2O. The composite catalyst shows significantly increased efficiency in hydrogen evolution under specific conditions, providing an innovative strategy for photocatalytic hydrogen production.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2022)

Article Chemistry, Multidisciplinary

Bridging Effect of S-C Bond for Boosting Electron Transfer over Cubic Hollow CoS/g-C3N4 Heterojunction toward Photocatalytic Hydrogen Production

Zhaobo Fan et al.

Summary: The construction of interfacial effects and chemical bonds between catalysts can effectively facilitate photogenerated electron transfer. In this study, a novel catalyst was successfully constructed and connected with a photocatalyst through a chemical bond, acting as a bridge for electron transmission. Furthermore, it was found that this chemical bond can rapidly transfer photogenerated carriers and achieve high-efficiency hydrogen evolution. The experimental results showed that this structure can enhance the hydrogen production compared to traditional materials.

LANGMUIR (2022)

Article Engineering, Chemical

Lotus-leaf-like Bi2O2CO3 nanosheet combined with Mo2S3 for higher photocatalytic hydrogen evolution

Junke Li et al.

Summary: The exploration of multiple composite materials with heterojunction structures is important for high-yield hydrogen photocatalytic evolution. In this study, a Mo2S3/Bi2O2CO3 composite with a unique n-n heterojunction and 2D spatial structure was successfully prepared. The composite material with 3% Bi2O2CO3 exhibited the highest photocatalytic effect.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Article Chemistry, Physical

Precisely modifying Co2P/black TiO2 S-scheme heterojunction by in situ formed P and C dopants for enhanced photocatalytic H2 production

Lei Chen et al.

Summary: This study presents the modification of S-scheme heterojunction catalysts by introducing P and C dopants, which not only enhance the surface activity but also optimize the charge separation and migration. The modified Co2P/PC-b-TiO2 photocatalyst shows significantly improved photocatalytic hydrogen evolution performance and stability.

APPLIED CATALYSIS B-ENVIRONMENTAL (2022)

Article Materials Science, Multidisciplinary

EDA-assisted synthesis of multifunctional snowflake-Cu2S/CdZnS S-scheme heterojunction for improved the photocatalytic hydrogen evolution

Guorong Wang et al.

Summary: This study successfully improved the efficiency of solar photocatalytic water decomposition for hydrogen production by constructing a 2%Cu2S/CZS step-scheme heterojunction. The introduction of Cu2S has advantages of reducing particle agglomeration, broadening the light response range, and accelerating charge separation and transfer.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Article Engineering, Chemical

Graphdiyne (g-CnH2n-2) based Co3S4 anchoring and edge-covalently modification coupled with carbon-defects g-C3N4 for photocatalytic hydrogen production

Kaicheng Yang et al.

Summary: In this research, a nano hybrid material was developed for efficient photocatalytic hydrogen evolution. The material has a unique structure and porous framework that allows for multivariate collaborative catalysis. Additionally, it exhibits excellent charge transfer rate and lower carrier recombination rate, resulting in smaller hydrogen evolution overpotential.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Article Chemistry, Physical

In2O3-Modified Three-Dimensional Nanoflower MoSx Form S-scheme Heterojunction for Efficient Hydrogen Production

Hongying Li et al.

Summary: By regulating the morphology and constructing heterojunction, a three-dimensional nanoflower morphology MoSx/In2O3 composite catalyst was prepared, which significantly improved the hydrogen evolution activity and solved the light absorption issue of In2O3.

ACTA PHYSICO-CHIMICA SINICA (2022)

Review Chemistry, Multidisciplinary

2D graphdiyne: an emerging carbon material

Yan Fang et al.

Summary: Graphdiyne (GDY), as a new member of carbon allotropes, possesses unique chemical and electronic structures and has found applications in energy, catalysis, environmental science, and electronic devices. It has been recognized for its scientific value and development potential.

CHEMICAL SOCIETY REVIEWS (2022)

Article Chemistry, Applied

Efficient photocatalytic hydrogen evolution over graphdiyne boosted with a cobalt sulfide formed S-scheme heterojunction

Zhiliang Jin et al.

Summary: Graphdiyne (GDY), a novel two-dimensional carbon hybrid material, has attracted significant attention due to its unique and excellent properties. This study reports new progress in the preparation of a composite material, Co9S8-GDY-CuI, using CuI powder as a catalytic material and a facile hydrothermal method. The Co9S8-GDY-CuI exhibited hydrogen production activity 10.29 times higher than that of pure GDY in the sensitization system. Characterization techniques provided evidence for the successful preparation of the material and its superior photocatalytic activity. A possible reaction mechanism and the effects of Co9S8 nanoparticles were also discussed.

CHINESE JOURNAL OF CATALYSIS (2022)

Article Chemistry, Multidisciplinary

Construction of Six-Oxygen-Coordinated Single Ni Sites on g-C3N4 with Boron-Oxo Species for Photocatalytic Water-Activation-Induced CO2 Reduction

Yuying Wang et al.

Summary: The configuration regulation of single-atom photocatalysts plays a crucial role in the interfacial charge transfer and catalytic process for CO2 reduction. This study successfully anchored single Ni atoms onto g-C3N4 nanosheets, providing a highly efficient photocatalyst for aqueous CO2 reduction. Various experimental techniques revealed that the six-oxygen-coordinated single Ni (II) sites can efficiently capture photoelectrons and activate water molecules to induce a hydrogen-assisted CO2 reduction.

ADVANCED MATERIALS (2021)

Article Chemistry, Physical

Plasmonic enhancement of hydrogen production by water splitting with CdS nanowires protected by metallic TiN overlayers as highly efficient photocatalysts

Yan-Ting Liu et al.

Summary: A novel CdS/TiN core-shell structure has been synthesized to improve hydrogen production in photocatalytic water splitting. The use of TiN layer helps enhance light absorption and electron concentration, reduce carrier recombination, and maintain chemical stability during the process. Calculation and simulation show the protective TiN layer's positive effects on the electric fields generated by light irradiance, supporting the proposed mechanism for best performance with plasmonic enhancement.

NANO ENERGY (2021)

Article Chemistry, Physical

Effect of phosphating on NiAl-LDH layered double hydroxide form S-scheme heterojunction for photocatalytic hydrogen evolution

Dujuan Li et al.

Summary: The phosphating process transforms NiAl-LDH into Ni2P with strong adsorption characteristics, which can participate in photocatalytic reactions and provide a 3D reaction site for photoelectrons. The S-scheme interface heterojunction can improve the utilization of electrons and increase the efficiency of hydrogen evolution in NiAl-LDH.

MOLECULAR CATALYSIS (2021)

Article Nanoscience & Nanotechnology

Graphdiyne Based Ternary GD-Cul-NiTiO3 S-Scheme Heterjunction Photocatalyst for Hydrogen Evolution

Teng Yan et al.

Summary: This study successfully constructed the NiTiO3-CuI-GD ternary system to improve hydrogen production activity through morphology modulation and energy band structure design, proposing an S-scheme heterojunction photocatalytic reaction mechanism.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Chemistry, Physical

TiO2/polydopamine S-scheme heterojunction photocatalyst with enhanced CO2-reduction selectivity

Aiyun Meng et al.

Summary: This study fabricated polydopamine-modified TiO2 hollow spheres and investigated their effect on the photocatalytic CO2 reduction activities. The results showed that the PDA wrapping significantly enhanced the photocatalytic activity and methane selectivity, leading to improved yields.

APPLIED CATALYSIS B-ENVIRONMENTAL (2021)

Article Engineering, Environmental

0D?-Ni(OH)2 nanoparticles/1D Mn0.3Cd0.7S nanorods with rich S vacancies for improved photocatalytic H2 production

Jingwen Zhang et al.

Summary: Engineering semiconductor materials with vacancies and co-catalysts is an effective method to enhance their photocatalytic performance. In this study, Mn0.3Cd0.7S nanorods modified with S vacancies and ?-Ni(OH)2 nanoparticles exhibited excellent visible-light H2-production activity, attributed to enhanced transfer/separation of photogenerated carriers and increased reaction sites. These findings propose a new approach for utilizing metal hydroxide co-catalysts and vacancies in sulfide materials for photocatalytic H2 production.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Chemistry, Multidisciplinary

A New Allotrope of Carbon-Graphdiyne (g-CnH2n-2) Boosting with Mn0.2Cd0.8S form S-Scheme Heterojunction for Efficient Photocatalytic Hydrogen Evolution

Zhiliang Jin et al.

Summary: By modifying Mn0.2Cd0.8S (MCS) solid solution with graphdiyne/CuI, the performance of the photocatalyst was significantly improved, achieving efficient hydrogen production. The S-scheme heterojunction constructed between graphdiyne and MCS greatly enhanced the transfer rate of photoinduced electrons.

ADVANCED MATERIALS INTERFACES (2021)

Article Energy & Fuels

CoAl LDH@Ni-MOF-74 S-Scheme Heterojunction for Efficient Hydrogen Evolution

Zhiliang Jin et al.

Summary: The research successfully designed and synthesized a photocatalyst with an S-type heterojunction, CoAl LDH@Ni-MOF-74, which enhanced the hydrogen generation activity by coupling Ni-MOF-74 and CoAl LDH.

TRANSACTIONS OF TIANJIN UNIVERSITY (2021)

Article Chemistry, Physical

Amorphous Co3S4 nanoparticle-modified tubular g-C3N4 forms step-scheme heterojunctions for photocatalytic hydrogen production

Yuanpeng Wang et al.

Summary: This study successfully reduced the recombination rate of photogenerated electron-hole pairs by constructing heterojunctions with a matched band structure, leading to improved photocatalytic H-2 evolution. The creation of a step-scheme heterojunction between g-C3N4 hexagonal tubes and Co3S4 ultra-fine nanoparticles enhanced spatial charge separation, resulting in more effective electrons for the photocatalytic reaction.

CATALYSIS SCIENCE & TECHNOLOGY (2021)

Article Chemistry, Applied

Construction of LSPR-enhanced 0D/2D CdS/MoO3-x S-scheme heterojunctions for visible-light-driven photocatalytic H2 evolution

Jinjun Peng et al.

Summary: The plasmonic nonmetal semiconductor CdS/MoO3-x heterojunction with localized surface plasmon resonance (LSPR) effects exhibited extended light-response ranges and enhanced photocatalytic H-2 generation activity compared to pristine CdS under visible light irradiation, with improved photo-corrosion performance.

CHINESE JOURNAL OF CATALYSIS (2021)

Article Chemistry, Applied

Constructing low-cost Ni3C/twin-crystal Zn0.5Cd0.5S heterojunction/homojunction nanohybrids for efficient photocatalytic H2 evolution

Rongchen Shen et al.

Summary: This study combines low-cost metallic Ni3C cocatalysts with twin nanocrystal Zn0.5Cd0.5S (ZCS) solid solution homojunctions to achieve efficient visible-light-driven H-2 evolution. The ZCS-1 heterojunction/homojunction nanohybrid shows the highest photocatalytic H-2-evolution rate, indicating a more efficient photocatalytic H-2 evolution compared to other noble metal photocatalytic systems. The unique strategy of constructing heterojunction/homojunction hybrid nanostructures demonstrates improved catalytic activity for H-2 evolution under visible light.

CHINESE JOURNAL OF CATALYSIS (2021)

Article Chemistry, Applied

Hierarchically porous S-scheme CdS/UiO-66 photocatalyst for efficient 4-nitroaniline reduction

Jinxin Wei et al.

Summary: The study investigated the pore size effect of metal organic framework UiO-66 on the performance of CdS/UiO-66 catalysts, revealing the distribution differences of CdS nanoparticles in UiO-66 with different pore sizes. It was demonstrated that the macroporous CdS/UiO-66 catalyst exhibited higher activity compared to the mesoporous counterpart.

CHINESE JOURNAL OF CATALYSIS (2021)

Review Chemistry, Multidisciplinary

S-Scheme Heterojunction Photocatalyst

Quanlong Xu et al.

Article Chemistry, Applied

Highly efficient visible-light photocatalytic H-2 evolution over 2D-2D CdS/Cu7S4 layered heterojunctions

Doudou Ren et al.

CHINESE JOURNAL OF CATALYSIS (2020)

Article Chemistry, Inorganic & Nuclear

Ferrous oxalate dehydrate over CdS as Z-scheme photocatalytic hydrogen evolution

Lijun Zhang et al.

JOURNAL OF SOLID STATE CHEMISTRY (2019)

Article Chemistry, Physical

Ultrathin 2D/2D WO3/g-C3N4 step-scheme H2-production photocatalyst

Junwei Fu et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2019)

Article Chemistry, Physical

Photocatalytic H2 evolution on graphdiyne/g-C3N4 hybrid nanocomposites

Quanlong Xu et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2019)

Article Chemistry, Physical

Design and synthesis of Ni-Co and Ni-Mn layered double hydroxides hollow microspheres for supercapacitor

M. Li et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

Article Chemistry, Multidisciplinary

Defect Graphene as a Trifunctional Catalyst for Electrochemical Reactions

Yi Jia et al.

ADVANCED MATERIALS (2016)

Article Chemistry, Physical

Truly Transparent p-Type γ-Cul Thin Films with High Hole Mobility

Naoomi Yamada et al.

CHEMISTRY OF MATERIALS (2016)

Article Chemistry, Inorganic & Nuclear

Construction of graphdiyne nanowires with high-conductivity and mobility

Xuemin Qian et al.

DALTON TRANSACTIONS (2012)

Article Chemistry, Multidisciplinary

Architecture of graphdiyne nanoscale films

Guoxing Li et al.

CHEMICAL COMMUNICATIONS (2010)

Article Physics, Multidisciplinary

Raman spectrum of graphene and graphene layers

A. C. Ferrari et al.

PHYSICAL REVIEW LETTERS (2006)