☆ 4.8 Article

Oxide-Based Solid-State Batteries: A Perspective on Composite Cathode Architecture

ADVANCED ENERGY MATERIALS (2023)

Related references

Note: Only part of the references are listed.
Article Electrochemistry

Influence of Lithium Ion Kinetics, Particle Morphology and Voids on the Electrochemical Performance of Composite Cathodes for All-Solid-State Batteries

Anja Bielefeld et al.

Summary: In this study, electrochemical simulation using the finite element method is employed to investigate the influence of microstructural characteristics on composite cathodes. The research focuses on the particle size distribution of the active material, state-of-charge dependent input parameters, and the presence of voids in the electrode.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2022)

Add to Collection
Article Chemistry, Physical

Avoiding CO2 Improves Thermal Stability at the Interface of Li7La3Zr2O12 Electrolyte with Layered Oxide Cathodes

Younggyu Kim et al.

Summary: Solid-state batteries offer higher energy densities and improved safety compared to liquid electrolyte Li-ion batteries, but the stability of the solid electrolyte-cathode interface at elevated temperatures is a challenge. This study reveals the critical role of gas environment, especially CO2, in determining the stability of the interface, and demonstrates that removing CO2 and minimizing H2O(g) during sintering can promote good contact at the interface without forming detrimental phases.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection
Article Multidisciplinary Sciences

On the feasibility of all-solid-state batteries with LLZO as a single electrolyte

Kostiantyn Kravchyk et al.

Summary: Replacing liquid-state electrolytes with solid-state counterparts in Li-ion batteries is a major research objective. Among the different solid-state electrolytes, garnet-type Li-ion electrolytes based on LLZO are considered promising candidates, but they still face challenges due to high density and lower ion conductivity compared to liquid electrolytes.

SCIENTIFIC REPORTS (2022)

Add to Collection
Article Chemistry, Physical

Free standing dual phase cathode tapes - scalable fabrication and microstructure optimization of garnet-based ceramic cathodes

Melanie Rosen et al.

Summary: Research demonstrates that by shifting battery design and optimizing microstructure, the energy density of ceramic-based all-solid-state batteries can be improved. The use of a new fabrication method allows for industrial relevance in oxide garnet-based systems. Additionally, the materials exhibit sufficient stability to be applied to higher energy density full cells.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Add to Collection
Article Nanoscience & Nanotechnology

Study of LiCoO2/Li7La3Zr2O12:Ta Interface Degradation in All-Solid-State Lithium Batteries

Martin Ihrig et al.

Summary: The garnet-type Li7La3Zr2O12 (LLZO) ceramic solid electrolyte has high Li-ion conductivity and chemical stability at room temperature. However, capacity fading during cycling is a common issue. Investigation of the LiCoO2/LLZO interface revealed electrochemically driven cation diffusion, leading to the formation of an amorphous secondary phase interlayer with high impedance and causing capacity fading. Thermodynamic analysis also suggests the formation of low- or non-conducting secondary phases during cycling, further contributing to capacity fading. Understanding this degradation process is crucial for improving the cycling stability of garnet-based all-solid-state Li batteries.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection
Article Chemistry, Physical

Flexible machine-learning interatomic potential for simulating structural disordering behavior of Li7La3Zr2O12 solid electrolytes

Kwangnam Kim et al.

Summary: This article reports and validates an ML potential that can simulate the properties of crystalline, disordered, and amorphous LLZO systems under a wide range of conditions, with high accuracy and scalability compared to ab initio simulations.

JOURNAL OF CHEMICAL PHYSICS (2022)

Add to Collection
Article Electrochemistry

All Solid-State Li/LLZO/LCO Battery Enabled by Alumina Interfacial Coating

Yaoyu Ren et al.

Summary: LLZO garnet-type lithium-ion conductors are being investigated as a promising solid electrolyte for solid-state lithium batteries. Adding a thin aluminum oxide interlayer between LCO and the LLZO garnet can improve the performance of the battery by facilitating Li-ion transfer.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2022)

Add to Collection
Article Chemistry, Multidisciplinary

Elucidating the Role of Microstructure in Thiophosphate Electrolytes - a Combined Experimental and Theoretical Study of β-Li3PS4

Tugce Ates et al.

Summary: Solid-state batteries, with optimized solid electrolytes, have the potential to exceed the energy densities of lithium-ion batteries. In this study, the microstructure of beta-LPS electrolyte and its impact on electrochemical performance were investigated. It was found that beta-LPS electrolyte pellets with higher porosity and larger particle size exhibited higher ionic conductivity and improved cycling stability.

ADVANCED SCIENCE (2022)

Add to Collection
Article Chemistry, Physical

All-Solid-State Li Batteries with NCM-Garnet-Based Composite Cathodes: The Impact of NCM Composition on Material Compatibility

Christoph Roitzheim et al.

Summary: This study investigates the cosintering behavior of LLZO:Ta with NCM111 and Ni-rich NCM811 and finds that Ni-rich NCM811 is the most promising cathode active material for the combination with garnet-type LLZO:Ta. B doping is employed to evaluate its impact on cation interchange and secondary phase formation. Fully inorganic, ceramic all-solid-state lithium batteries are prepared with high specific areal discharge capacity.

ACS APPLIED ENERGY MATERIALS (2022)

Add to Collection
Article Chemistry, Multidisciplinary

Rational Design of Mixed Electronic-Ionic Conducting Ti-Doping Li7La3Zr2O12 for Lithium Dendrites Suppression

Jian Gao et al.

Summary: LLZO ceramic electrolyte has high ionic conductivity and wide electrochemical window, but dendrite penetration remains a challenge. By introducing a Ti-doped T-LLZO interlayer between Li and LLZO, a mixed electronic-ionic conducting interphase is formed, which effectively alleviates overpotential and theoretically suppresses lithium dendrites. These proposed mechanisms are experimentally verified by improved stability of Li/Li symmetric cell using T-LLZO ceramic pellet electrolyte.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection
Article Chemistry, Multidisciplinary

Lithium-Metal Anode Instability of the Superionic Halide Solid Electrolytes and the Implications for Solid-State Batteries

Luise M. Riegger et al.

Summary: This study investigates the formation of a reaction layer and stability issues between halide-based solid electrolytes and lithium, aiming to find methods for long-term stable and low impedance operation. The results show that halide-based lithium superionic conductors react with lithium metal, leading to unstable interfaces and increased resistance.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection
Article Chemistry, Physical

Chemo-mechanical modeling of stress evolution in all-solid-state lithium-ion batteries using synchrotron transmission X-ray microscopy tomography

Hamed Fathiannasab et al.

Summary: The study found that the microstructure of composite electrodes in all-solid-state lithium-ion batteries has a significant impact on the stress evolution induced by lithiation, particularly the solid electrolyte/active material interface and void space. Higher pressing pressure during electrode fabrication can improve ion pathways but may lead to stress formation and crack propagation. The stiffness of the solid electrolyte affects stress formation and displacement of the active material.

JOURNAL OF POWER SOURCES (2021)

Add to Collection
Article Chemistry, Physical

Low temperature sintering of fully inorganic all-solid-state batteries - Impact of interfaces on full cell performance

Martin Ihrig et al.

Summary: The study introduces a completely dry processing route for manufacturing dense composite cathodes, pure LLZ separators, and multilayers of the two through high mechanical pressure during Field-Assisted Sintering. The low sintering temperature achieved is suitable for high energy CAMs but leads to surface impurities affecting the crystallinity of the CAM/LLZ interface. Investigating the impact of resulting interfaces on ionic conductivity, interfacial impedance, and cycling stability of produced cells, an optimization strategy is proposed.

JOURNAL OF POWER SOURCES (2021)

Add to Collection
Article Electrochemistry

Interfacial Engineering in a Cathode Composite Based on Garnet-Type Solid-State Li-Ion Battery with High Voltage Cycling

Ramkumar Balasubramaniam et al.

Summary: This study proposed a surface modification and subsequent sintering method to enhance the interfacial connection between the cathode and the solid electrolyte in garnet-type solid electrolyte Li-ion batteries. The surface modification effectively reduced the interfacial resistance and promoted efficient Li-ion transfer pathways across the cathode/solid-electrolyte interface, leading to improved battery performance.

CHEMELECTROCHEM (2021)

Add to Collection
Review Nanoscience & Nanotechnology

Lithium-film ceramics for solid-state lithionic devices

Yuntong Zhu et al.

Summary: This review explores the chemistry and thin-film processing of Li oxides and highlights their potential integration in microbatteries, neuromorphic computing, and sensors. Thin-film Li oxides offer fast Li-ion movement and electronic-state changes, leading to improved energy and information density, cycle speed, and endurance in Li-conductor-based devices. Additionally, a future vision is provided for lithionic devices utilizing Li-based ceramics in microdevices beyond batteries.

NATURE REVIEWS MATERIALS (2021)

Add to Collection
Article Engineering, Environmental

Tuning a compatible interface with LLZTO integrated on cathode material for improving NCM811/LLZTO solid-state battery

Zhikun Zhao et al.

Summary: This research introduces a binder-like Li3PO4 through an in-situ calcination process to build a compatible and Li+-conductive self-integrated layer with LiNi0.8Co0.1Mn0.1O2 cathode material, improving the performance of LiNi0.8Co0.1Mn0.1O2/Li6.4La3Zr1.4Ta0.6O12 solid state batteries. Through interface engineering, the in-situ generated Li3PO4 tightly fixes Li6.4La3Zr1.4Ta0.6O12 on LiNi0.8Co0.1Mn0.1O2, demonstrating high initial discharge capacities and good retention rates under different conditions.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection
Article Chemistry, Physical

The Working Principle of a Li2CO3/LiNbO3 Coating on NCM for Thiophosphate-Based All-Solid-State Batteries

Felix Walther et al.

Summary: This study improves the performance of all-solid-state batteries (ASSBs) by using a Li2CO3/LiNbO3 coating, which suppresses the interfacial reaction between the cathode active material and solid electrolyte, leading to a significant enhancement in battery performance.

CHEMISTRY OF MATERIALS (2021)

Add to Collection
Article Chemistry, Physical

On the Additive Microstructure in Composite Cathodes and Alumina-Coated Carbon Microwires for Improved All-Solid-State Batteries

Simon Randau et al.

Summary: The study investigates the influence of different morphologies and surface areas of carbon additives on the performance of all-solid-state batteries, revealing that fiber-shaped vapor-grown carbon additives can enhance cathode active material utilization, while particle-shaped carbons have minor effects. However, carbon additives generally lead to accelerated capacity loss and increased formation of solid electrolyte decomposition products. A protection concept involving alumina coating on carbon fibers is developed to minimize electrolyte degradation and enhance overall battery performance.

CHEMISTRY OF MATERIALS (2021)

Add to Collection
Article Chemistry, Physical

Exploring the relationship between solvent-assisted ball milling, particle size, and sintering temperature in garnet-type solid electrolytes

Marissa Wood et al.

Summary: This study systematically explores the relationship between solvent choice, particle properties, sintering behavior, and ionic conductivity, finding that milling in aprotic solvents with surfactant can reduce particle size without lithium loss, enabling fabrication of dense samples with good ionic conductivity at lower sintering temperatures. The results clarify the importance of processing parameters and represent significant progress towards overcoming fabrication challenges for garnet-type solid electrolytes.

JOURNAL OF POWER SOURCES (2021)

Add to Collection
Article Chemistry, Physical

Journal of Power Sources Modelling electro-chemical induced stresses in all-solid-state batteries: Anisotropy effects in cathodes and cell design optimisation

Robert Muecke et al.

Summary: All-solid-state lithium batteries have advantages in energy density and safety, but low cycling stability due to mechanical fatigue. By modeling and analyzing stresses in rigid structures, optimized cell designs with improved mechanical stability can be developed.

JOURNAL OF POWER SOURCES (2021)

Add to Collection
Article Electrochemistry

Modeling of Chemo-Mechanical Multi-Particle Interactions in Composite Electrodes for Liquid and Solid-State Li-Ion Batteries

Donald Bistri et al.

Summary: The modeling of chemo-mechanical interactions between active particles in battery electrodes is explored in this study, including a focus on local current densities, stress-coupled electrochemical potential, and potential for mechanical degradation. A novel chemo-mechanical surface element is developed to capture the local non-linear reaction kinetics and mechanical degradation. By modeling traditional and next generation solid-state composite cathodes, the study demonstrates how simulation can optimize electro-chemical and mechanical properties while minimizing degradation and improving performance.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2021)

Add to Collection
Article Chemistry, Physical

Unraveling the Li Penetration Mechanism in Polycrystalline Solid Electrolytes

Karnpiwat Tantratian et al.

Summary: In this study, the mechanism of Li penetration in polycrystalline SEs was revealed using an electro-chemo-mechanical phase-field model, with a focus on the influence of mechanical and electronic properties of grain boundaries. High-throughput simulations produced a phase map of Li penetration patterns under different conditions, providing quantitative information for designing improved SE materials.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection
Review Energy & Fuels

Processing thin but robust electrolytes for solid-state batteries

Moran Balaish et al.

Summary: This review critically discusses the research status of high-energy-density solid-state batteries, focusing on cost-effective processing and the integration of solid electrolyte materials. The future design of SSBs should consider capturing the thermal processing budget and stability of the oxide solid electrolyte phase.

NATURE ENERGY (2021)

Add to Collection
Article Chemistry, Physical

Microstructural impacts on ionic conductivity of oxide solid electrolytes from a combined atomistic-mesoscale approach

Tae Wook Heo et al.

Summary: This study demonstrates an efficient and general computational method for predicting effective ionic conductivity of complex polycrystalline oxide-based solid electrolytes, revealing the interdependence between atomistic and mesoscopic impacts on ionic conductivity. The results offer fundamental understanding of the physical origins of variability in ionic conductivities and practical design guidance for achieving desired ionic transport properties.

NPJ COMPUTATIONAL MATERIALS (2021)

Add to Collection
Article Electrochemistry

Editors' Choice-Quantifying the Impact of Charge Transport Bottlenecks in Composite Cathodes of All-Solid-State Batteries

Philip Minnmann et al.

Summary: This study analyzed the charge transport in composite cathodes composed of Li6PS5Cl and NCM-622, revealing correlations between effective conductivities, microstructure, and cell performance. Strategies for optimizing cell performance were developed and demonstrated through adjusting active material loadings and solid electrolyte particle size to tune electronic and ionic charge transport pathways.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2021)

Add to Collection
Article Chemistry, Physical

Computation-guided discovery of coating materials to stabilize the interface between lithium garnet solid electrolyte and high-energy cathodes for all-solid-state lithium batteries

Adelaide M. Nolan et al.

Summary: Research shows that to further develop all-solid-state batteries, stable interfaces between high-energy cathodes and garnet solid electrolytes are needed, and this can be achieved through coating layers to stabilize the interface, enabling high energy density batteries. The study also provides detailed guiding charts and multiple new material systems as promising choices for stable interface coatings.

ENERGY STORAGE MATERIALS (2021)

Add to Collection
Article Chemistry, Physical

Polycrystalline and Single Crystalline NCM Cathode Materials-Quantifying Particle Cracking, Active Surface Area, and Lithium Diffusion

Enrico Trevisanello et al.

Summary: The NCM family of cathode active materials with high nickel content is becoming the preferred choice for high performance lithium-ion batteries. Study shows that cracking of polycrystalline particles of NCM is not only detrimental, but also helps achieve higher reversible capacities and rate capability. Optimization of CAM size and morphology is crucial for achieving good rate capability with high-nickel NCMs.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection
Article Chemistry, Physical

Influence of Crystallinity of Lithium Thiophosphate Solid Electrolytes on the Performance of Solid-State Batteries

Shuo Wang et al.

Summary: Solid electrolytes play a crucial role in defining the properties of all-solid-state batteries. This study investigates the impact of crystallinity on the performance of solid electrolytes, revealing that glass/glass-ceramic electrolytes show better cycling and rate performance compared to crystalline counterparts. Furthermore, the decomposition behavior of solid electrolytes at typical cathode potentials is studied, with crystalline electrolytes showing higher electronic partial conductivity leading to more degradation in composite cathodes.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection
Article Chemistry, Physical

Unveiling decaying mechanism through quantitative structure-activity relationship in electrolytes for lithium-ion batteries

Chi-Cheung Su et al.

Summary: Understanding the decay mechanism in high-voltage LIBs is crucial for establishing a stable electrolyte system. While oxidative decomposition is believed to be the main cause of capacity fade, it cannot fully explain the rapid decay in certain electrolyte systems used with high-nickel layered oxide cathode.

NANO ENERGY (2021)

Add to Collection
Review Chemistry, Multidisciplinary

Physical Vapor Deposition in Solid-State Battery Development: From Materials to Devices

Sandra Lobe et al.

Summary: This review discusses the contribution of physical vapor deposition (PVD) processes to the development of electrochemical energy storage systems with emphasis on solid-state batteries. It provides an overview of PVD technologies and highlights the utility of PVD for the fabrication and characterization of individual battery materials. Key methods for the fabrication of solid electrolytes and active electrode materials with well-defined properties are described, demonstrating how these techniques facilitate the understanding of fundamental material properties and interfacial phenomena as well as the development of new materials.

ADVANCED SCIENCE (2021)

Add to Collection
Article Chemistry, Physical

Break-Even Analysis of All-Solid-State Batteries with Li-Garnet Solid Electrolytes

Kostiantyn V. Kravchyk et al.

ACS ENERGY LETTERS (2021)

Add to Collection
Editorial Material Chemistry, Physical

Challenges for and Pathways toward Li-MetalBased All-Solid-State Batteries

Paul Albertus et al.

ACS ENERGY LETTERS (2021)

Add to Collection
Article Chemistry, Physical

Design of High-Voltage Stable Hybrid Electrolyte with an Ultrahigh Li Transference Number

Kewei Liu et al.

Summary: This study presents a hybrid electrolyte with single-ion conductivity, combining polymer with ceramic electrolytes, showing high Li transference number and good electrochemical stability. Compared to traditional electrolytes, this hybrid electrolyte exhibits high Coulombic efficiencies in lithium-ion batteries.

ACS ENERGY LETTERS (2021)

Add to Collection
Article Chemistry, Physical

Effect of the 3D Structure and Grain Boundaries on Lithium Transport in Garnet Solid Electrolytes

Anton Neumann et al.

Summary: The study focuses on the performance limitations in garnet ASSBs, particularly the high lithium interface resistance and grain boundary resistance in the solid electrolyte (SE). By using 3D microstructure-resolved simulation approach and a modified grain boundary transport model, the researchers shed light on these limitations by analyzing high-resolution volume images of the SE electrode sample. Recommendations for improving the performance of trilayer structured batteries were made based on the findings from impedance simulation studies and experimental validation.

ACS APPLIED ENERGY MATERIALS (2021)

Add to Collection
Article Chemistry, Physical

Investigating the Calcination and Sintering of Li7La3Zr2O12 (LLZO) Solid Electrolytes Using Operando Synchrotron X-ray Characterization and Mesoscale Modeling

Pallab Barai et al.

Summary: This paper investigates the grain growth during calcination and densification of LLZO by using synchrotron X-ray diffraction combined with a mesoscale model, revealing the significant impact of synthesis conditions on the densification process.

CHEMISTRY OF MATERIALS (2021)

Add to Collection
Article Chemistry, Physical

Investigation of Delamination-Induced Performance Decay at the Cathode/LLZO Interface

Pallab Barai et al.

Summary: This paper investigates the issue of delamination at the cathode/solid-state electrolyte interface in solid-state batteries. Multiscale mathematical models are developed to link material properties to performance and provide guidance on minimizing delamination, impedance rise, and capacity fade. Smaller grain size and low Young's modulus in SSE, along with cathodes with low molar volume changes, are identified as opportunities for reducing delamination.

CHEMISTRY OF MATERIALS (2021)

Add to Collection
Review Chemistry, Multidisciplinary

A Review on Li+/H+ Exchange in Garnet Solid Electrolytes: From Instability against Humidity to Sustainable Processing in Water

Ruijie Ye et al.

Summary: Garnet-based Li-ion conductors may undergo Li+/H+ exchange reactions when exposed to moisture or protic solvents, leading to decreased conductivity and challenges in commercial applicability. Researchers have proposed strategies to prevent and recover garnets, aiming to advance sustainable and scalable fabrication of this promising material class.

CHEMSUSCHEM (2021)

Add to Collection
Article Chemistry, Physical

Poly(ethylene glycol) brush on Li6.4La3Zr1.4Ta0.6O12 towards intimate interfacial compatibility in composite polymer electrolyte for flexible all-solid-state lithium metal batteries

Qingya Guo et al.

Summary: By modifying LLZTO nanoparticles with surface functionalization, the interfacial compatibility with PEO was enhanced. This resulted in significantly improved ionic conductivity and cycling stability of the LLZTO/PEO composite polymer electrolyte.

JOURNAL OF POWER SOURCES (2021)

Add to Collection
Article Electrochemistry

Understanding the Impact of Microstructure on Charge Transport in Polycrystalline Materials Through Impedance Modelling

Janis K. Eckhardt et al.

Summary: The microstructure of the sample has a significant impact on impedance, affecting the impedance response in both frequency and time domains. Additional contributions identified in relaxation time distribution cannot be explained by conventional analysis based on equivalent circuit models. Neglecting the peculiarities of the real microstructure in impedance analysis may lead to deviations in microscopic transport parameters.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2021)

Add to Collection
Article Materials Science, Ceramics

Towards understanding particle rigid-body motion during solid-state sintering

Rongpei Shi et al.

Summary: Using a multi-phase-field approach in computer simulation, the study systematically analyzes the roles played by particle size and thermodynamic and kinetic factors of interfaces in different stages of internal pore shrinkage in a three-particle green body. It is demonstrated that particle rigid body translation promotes neck growth and pore rounding and shrinkage, while rotation does not contribute to pore shrinkage.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Add to Collection
Article Chemistry, Physical

Local electronic structure variation resulting in Li 'filament' formation within solid electrolytes

Xiaoming Liu et al.

Summary: Solid electrolytes show promise for Li metal anodes, but Li infiltration along grain boundaries can lead to battery failure due to its association with local electronic band structure. Optimization of grain-boundary electronic conductivity is crucial for future solid-state battery design.

NATURE MATERIALS (2021)

Add to Collection
Review Chemistry, Physical

Application of Ionic Liquids for Batteries and Supercapacitors

Apurba Ray et al.

Summary: This article discusses the demand for high-performance, lightweight, and low-cost electronic devices, which has prompted research into advanced electrochemical energy storage devices and technologies. The focus is on ionic liquids as electrolytes in Li-ion batteries and supercapacitors, highlighting their potential, advantages, and challenges.

MATERIALS (2021)

Add to Collection
Review Chemistry, Applied

Ionic liquids for high performance lithium metal batteries

Kexin Liu et al.

Summary: The pursuit of high energy density has driven the development of high-performance lithium metal batteries, but it also brings about security issues. Ionic liquids have attracted attention for their high ionic conductivity and non-flammability, which are significant for improving lithium metal battery performance. The main strategies for future development of ionic liquid-based electrolytes for high performance lithium metal batteries will focus on molecular design, composition, and polymerization.

JOURNAL OF ENERGY CHEMISTRY (2021)

Add to Collection
Review Chemistry, Physical

Transitioning solid-state batteries from lab to market: Linking electro-chemo-mechanics with practical considerations

Michael J. Wang et al.

Summary: SSBs have the potential to replace Li-ion batteries, but they still face challenges. Recent technological advancements are focusing on overcoming these challenges around the electrochemical, thermal, and mechanical properties.

JOULE (2021)

Add to Collection
Article Materials Science, Multidisciplinary

Blocking lithium dendrite growth in solid-state batteries with an ultrathin amorphous Li-La-Zr-O solid electrolyte

Jordi Sastre et al.

Summary: Research has shown that tuning the lithium stoichiometry in LLZO can form an amorphous phase, effectively blocking the growth of lithium dendrites, increasing ionic conductivity while maintaining high electronic insulation. The amorphous Li-La-Zr-O as a dendrite blocking layer shows excellent performance in microbatteries, promising to accelerate the development of better solid-state batteries.

COMMUNICATIONS MATERIALS (2021)

Add to Collection
Review Chemistry, Physical

Solid-State Li-Metal Batteries: Challenges and Horizons of Oxide and Sulfide Solid Electrolytes and Their Interfaces

Kun Joong Kim et al.

Summary: The introduction of new, safe, and reliable solid-electrolyte chemistries and technologies can potentially overcome the challenges facing their liquid counterparts while widening the breadth of possible applications. Through analyzing the transition from liquid-based Li-ion batteries (LIBs) to all-solid-state Li-metal batteries (ASSLBs), a roadmap for the development of a successful oxide and sulfide-based ASSLB is introduced, focusing on interfacial challenges and considering parameters such as energy density, power density, longterm stability, processing, and safety.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection
Article Chemistry, Multidisciplinary

Stable Thiophosphate-Based All-Solid-State Lithium Batteries through Conformally Interfacial Nanocoating

Daxian Cao et al.

NANO LETTERS (2020)

Add to Collection
Article Nanoscience & Nanotechnology

Analysis of Interfacial Effects in All-Solid-State Batteries with Thiophosphate Solid Electrolytes

Anton Neumann et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection
Article Nanoscience & Nanotechnology

Scalable Freeze-Tape-Casting Fabrication and Pore Structure Analysis of 3D LLZO Solid-State Electrolytes

Hao Shen et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection
Article Nanoscience & Nanotechnology

Modeling Effective Ionic Conductivity and Binder Influence in Composite Cathodes for All-Solid-State Batteries

Anja Bielefeld et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection
Article Nanoscience & Nanotechnology

Improved Interface Stability and Room-Temperature Performance of Solid-State Lithium Batteries by Integrating Cathode/Electrolyte and Graphite Coating

Hao Chen et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection
Article Chemistry, Multidisciplinary

The Effects of Constriction Factor and Geometric Tortuosity on Li-Ion Transport in Porous Solid-State Li-Ion Electrolytes

Tanner Hamann et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection
Article Materials Science, Ceramics

Synthesis of mixed ionic and electronic conducting garnet with doping of transition elements (Fe, Co, Ni)

Xu Cheng et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection
Article Electrochemistry

Studying of superionic solid electrolyte Li7La3Zr2O12 stability by means of chemical thermodynamics for application in all-solid-state batteries

E. A. Il'ina et al.

ELECTROCHIMICA ACTA (2020)

Add to Collection
Article Electrochemistry

Electro-chemo-mechanical modeling of solid-state batteries

Ting Hei Wan et al.

ELECTROCHIMICA ACTA (2020)

Add to Collection
Article Chemistry, Physical

Clarifying the relationship between redox activity and electrochemical stability in solid electrolytes

Tammo K. Schwietert et al.

NATURE MATERIALS (2020)

Add to Collection
Article Chemistry, Physical

Ni-Rich Layered Cathode Materials with Electrochemo-Mechanically Compliant Microstructures for All-Solid-State Li Batteries

Sung Hoo Jung et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection
Article Chemistry, Physical

High Active Material Loading in All-Solid-State Battery Electrode via Particle Size Optimization

Tan Shi et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection
Article Nanoscience & Nanotechnology

Stabilized Electrode/Electrolyte Interphase by a Saturated Ionic Liquid Electrolyte for High-Voltage NMC532/Si-Graphite Cells

Qian Liu et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection
Article Nanoscience & Nanotechnology

Cathode Interface Compatibility of Amorphous LiMn2O4 (LMO) and Li7La3Zr2OL12 (LLZO) Characterized with Thin-Film Solid-State Electrochemical Cells

Alexander A. Delluva et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection
Review Chemistry, Multidisciplinary

Classical and Emerging Characterization Techniques for Investigation of Ion Transport Mechanisms in Crystalline Fast Ionic Conductors

Yirong Gao et al.

CHEMICAL REVIEWS (2020)

Add to Collection
Review Chemistry, Multidisciplinary

Garnet-Type Solid-State Electrolytes: Materials, Interfaces, and Batteries

Chengwei Wang et al.

CHEMICAL REVIEWS (2020)

Add to Collection
Article Chemistry, Multidisciplinary

The Effect of Concentration of Lithium Salt on the Structural and Transport Properties of Ionic Liquid-Based Electrolytes

Jiahuan Tong et al.

FRONTIERS IN CHEMISTRY (2020)

Add to Collection
Article Materials Science, Ceramics

Correlating the effect of dopant type (Al, Ga, Ta) on the mechanical and electrical properties of hot-pressed Li-garnet electrolyte

Gigap Han et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

Add to Collection
Article Energy & Fuels

Benchmarking the performance of all-solid-state lithium batteries

Simon Randau et al.

NATURE ENERGY (2020)

Add to Collection
Article Nanoscience & Nanotechnology

Fast Charge Transfer across the Li7La3Zr2O12 Solid Electrolyte/LiCoO2 Cathode Interface Enabled by an Interphase-Engineered All-Thin-Film Architecture

Jordi Sastre et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection
Review Chemistry, Multidisciplinary

Physicochemical Concepts of the Lithium Metal Anode in Solid-State Batteries

Thorben Krauskopf et al.

CHEMICAL REVIEWS (2020)

Add to Collection
Review Chemistry, Multidisciplinary

Interfaces and Interphases in All-Solid-State Batteries with Inorganic Solid Electrolytes

Abhik Banerjee et al.

CHEMICAL REVIEWS (2020)

Add to Collection
Article Chemistry, Physical

Influence of Carbon Additives on the Decomposition Pathways in Cathodes of Lithium Thiophosphate-Based All-Solid-State Batteries

Felix Walther et al.

CHEMISTRY OF MATERIALS (2020)

Add to Collection
Article Chemistry, Physical

Mixed Ionic-Electronic Conductor of Perovskite LixLayMO3-δtoward Carbon-Free Cathode for Reversible Lithium-Air Batteries

Sang Bok Ma et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection
Article Chemistry, Physical

Electrochemical and Surface Chemistry Analysis of Lithium Lanthanum Zirconium Tantalum Oxide (LLZTO)/Liquid Electrolyte (LE) Interfaces

Arushi Gupta et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection
Article Chemistry, Physical

High Voltage Stable Polyoxalate Catholyte with Cathode Coating for All-Solid-State Li-Metal/NMC622 Batteries

Xiangyu Pan et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection
Review Chemistry, Applied

Lithium metal anodes: Present and future

Renheng Wang et al.

JOURNAL OF ENERGY CHEMISTRY (2020)

Add to Collection
Article Chemistry, Physical

Single crystal cathodes enabling high-performance all-solid-state lithium-ion batteries

Changhong Wang et al.

ENERGY STORAGE MATERIALS (2020)

Add to Collection
Article Chemistry, Physical

Importance of Composite Electrolyte Processing to Improve the Kinetics and Energy Density of Li Metal Solid-State Batteries

Jakub Zagorski et al.

ACS APPLIED ENERGY MATERIALS (2020)

Add to Collection
Article Chemistry, Physical

Kinetic versus Thermodynamic Stability of LLZO in Contact with Lithium Metal

Justin G. Connell et al.

CHEMISTRY OF MATERIALS (2020)

Add to Collection
Article Multidisciplinary Sciences

In-situ visualization of the space-charge-layer effect on interfacial lithium-ion transport in all-solid-state batteries

Longlong Wang et al.

NATURE COMMUNICATIONS (2020)

Add to Collection
Article Multidisciplinary Sciences

Adding salt to expand voltage window of humid ionic liquids

Ming Chen et al.

NATURE COMMUNICATIONS (2020)

Add to Collection
Article Electrochemistry

Influence of NCM Particle Cracking on Kinetics of Lithium-Ion Batteries with Liquid or Solid Electrolyte

Raffael Ruess et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

Add to Collection
Article Chemistry, Physical

Thermally Driven Interfacial Degradation between Li7La3Zr2O12 Electrolyte and LiNi0.6Mn0.2Co0.2O2 Cathode

Younggyu Kim et al.

CHEMISTRY OF MATERIALS (2020)

Add to Collection
Article Chemistry, Physical

Comparative Study on Sulfide and Oxide Electrolyte Interfaces with Cathodes in All-Solid-State Battery via First-Principles Calculations

Yukihiro Okuno et al.

ACS APPLIED ENERGY MATERIALS (2020)

Add to Collection
Article Electrochemistry

LiBO2-modified LiCoO2 as an efficient cathode with garnet framework Li6.75La3Zr1.75Nb0.25O12 electrolyte toward building all-solid-state lithium battery for high-temperature operation

Balasubramaniam Ramkumar et al.

ELECTROCHIMICA ACTA (2020)

Add to Collection
Review Energy & Fuels

Fracture behavior in battery materials

Ping Li et al.

JOURNAL OF PHYSICS-ENERGY (2020)

Add to Collection
Article Chemistry, Physical

The Interface between Li6.5La3Zr1.5Ta0.5O12 and Liquid Electrolyte

Jingyuan Liu et al.

JOULE (2020)

Add to Collection
Article Electrochemistry

Computational Modeling of Heterogeneity of Stress, Charge, and Cyclic Damage in Composite Electrodes of Li-Ion Batteries

Pengfei Liu et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

Add to Collection
Article Electrochemistry

Evaluation of The Electrochemo-Mechanically Induced Stress in All-Solid-State Li-Ion Batteries

Hong-Kang Tian et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

Add to Collection
Article Chemistry, Physical

Discovering the Influence of Lithium Loss on Garnet Li7La3Zr2O12 Electrolyte Phase Stability

Andrea Paolella et al.

ACS APPLIED ENERGY MATERIALS (2020)

Add to Collection
Article Electrochemistry

The Role of Local Inhomogeneities on Dendrite Growth in LLZO-Based Solid Electrolytes

Pallab Barai et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

Add to Collection
Article Materials Science, Multidisciplinary

Li Penetration in Ceramic Solid Electrolytes: Operando Microscopy Analysis of Morphology, Propagation, and Reversibility

Eric Kazyak et al.

MATTER (2020)

Add to Collection
Article Chemistry, Physical

All-Solid-State Batteries Using Rationally Designed Garnet Electrolyte Frameworks

Eongyu Yi et al.

ACS APPLIED ENERGY MATERIALS (2020)

Add to Collection
Article Chemistry, Physical

In situ thermally polymerized solid composite electrolytes with a broad electrochemical window for all-solid-state lithium metal batteries

Zhuo Li et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection
Article Materials Science, Ceramics

Dense freeze-cast Li7La3Zr2O12 solid electrolytes with oriented open porosity and contiguous ceramic scaffold

Lucienne Buannic et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2019)

Add to Collection
Article Materials Science, Multidisciplinary

High-rate lithium cycling in a scalable trilayer Li-garnet-electrolyte architecture

Gregory T. Hitz et al.

MATERIALS TODAY (2019)

Add to Collection
Article Materials Science, Ceramics

High densification and Li-ion conductivity of Al-free Li7-xLa3Zr2-xTaxO12 garnet solid electrolyte prepared by using ultrafine powders

Maoyi Yi et al.

CERAMICS INTERNATIONAL (2019)

Add to Collection
Article Chemistry, Physical

Identifying Active Sites for Parasitic Reactions at the Cathode-Electrolyte Interface

Yingying Xie et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2019)

Add to Collection
Article Chemistry, Physical

Modeling and simulation of inhomogeneities in a 18650 nickel-rich, silicon-graphite lithium-ion cell during fast charging

J. Sturm et al.

JOURNAL OF POWER SOURCES (2019)

Add to Collection
Review Materials Science, Multidisciplinary

A review of experimental approaches to fracture toughness evaluation at the micro-scale

J. Ast et al.

MATERIALS & DESIGN (2019)

Add to Collection
Article Chemistry, Multidisciplinary

Ionic Liquids: A Simple Model to Predict Ion Conductivity Based on DFT Derived Physical Parameters

Jonathan Nilsson-Hallen et al.

FRONTIERS IN CHEMISTRY (2019)

Add to Collection
Article Materials Science, Ceramics

Overcoming the abnormal grain growth in Ga-doped Li7La3Zr2O12 to enhance the electrochemical stability against Li metal

Jianmeng Su et al.

CERAMICS INTERNATIONAL (2019)

Add to Collection
Article Chemistry, Physical

Visualization of the Interfacial Decomposition of Composite Cathodes in Argyrodite-Based All-Solid-State Batteries Using Time-of-Flight Secondary-Ion Mass Spectrometry

Felix Walther et al.

CHEMISTRY OF MATERIALS (2019)

Add to Collection
Article Chemistry, Physical

Amorphous versus Crystalline Li3PS4: Local Structural Changes during Synthesis and Li Ion Mobility

Heike Stoeffler et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2019)

Add to Collection
Article Chemistry, Multidisciplinary

Key Aspects of Lithium Metal Anodes for Lithium Metal Batteries

Zahid Ali Ghazi et al.

SMALL (2019)

Add to Collection
Article Energy & Fuels

A low ride on processing temperature for fast lithium conduction in garnet solid-state battery films

Reto Pfenninger et al.

NATURE ENERGY (2019)

Add to Collection
Article Materials Science, Multidisciplinary

High-pressure field assisted sintering of half-cell for all-solid-state battery

Alexander M. Laptev et al.

MATERIALS LETTERS (2019)

Add to Collection
Article Chemistry, Physical

In-situ formed Li2CO3-free garnet/Li interface by rapid acid treatment for dendrite-free solid-state batteries

Hanyu Huo et al.

NANO ENERGY (2019)

Add to Collection
Article Energy & Fuels

High areal capacity battery electrodes enabled by segregated nanotube networks

Sang-Hoon Park et al.

NATURE ENERGY (2019)

Add to Collection
Article Chemistry, Multidisciplinary

3D Honeycomb Architecture Enables a High-Rate and Long-Life Iron (III) Fluoride-Lithium Battery

Feixiang Wu et al.

ADVANCED MATERIALS (2019)

Add to Collection
Article Chemistry, Physical

Interfacial Electronic Properties Dictate Li Dendrite Growth in Solid Electrolytes

Hong-Kang Tian et al.

CHEMISTRY OF MATERIALS (2019)

Add to Collection
Review Chemistry, Physical

Fundamentals of inorganic solid-state electrolytes for batteries

Theodosios Famprikis et al.

NATURE MATERIALS (2019)

Add to Collection
Article Chemistry, Physical

Solid-State Chemistries Stable with High-Energy Cathodes for Lithium-Ion Batteries

Adelaide M. Nolan et al.

ACS ENERGY LETTERS (2019)

Add to Collection
Article Nanoscience & Nanotechnology

Properties of the Interphase Formed between Argyrodite-Type Li6PS5Cl and Polymer-Based PEO10:LiTFSI

Fabian J. Simon et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection
Article Chemistry, Multidisciplinary

Water-Mediated Synthesis of a Superionic Halide Solid Electrolyte

Xiaona Li et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Add to Collection
Article Chemistry, Physical

Experimental Assessment of the Practical Oxidative Stability of Lithium Thiophosphate Solid Electrolytes

Georg F. Dewald et al.

CHEMISTRY OF MATERIALS (2019)

Add to Collection
Article Physics, Applied

Thermal expansion in insulating solids from first principles

Ethan T. Ritz et al.

JOURNAL OF APPLIED PHYSICS (2019)

Add to Collection
Article Chemistry, Physical

Deformation and stresses in solid-state composite battery cathodes

Hui-Chia Yu et al.

JOURNAL OF POWER SOURCES (2019)

Add to Collection
Article Nanoscience & Nanotechnology

Mitigating the Interfacial Degradation in Cathodes for High-Performance Oxide-Based Solid-State Lithium Batteries

Dawei Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection
Article Nanoscience & Nanotechnology

Tortuosity Effects in Garnet-Type Li7La3Zr2O12 Solid Electrolytes

Marm B. Dixit et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection
Article Chemistry, Multidisciplinary

Double-Layer Polymer Electrolyte for High-Voltage All-Solid-State Rechargeable Batteries

Weidong Zhou et al.

ADVANCED MATERIALS (2019)

Add to Collection
Article Chemistry, Physical

Mesoscale Chemomechanical Interplay of the LiNi0.8Co0.15Al0.05O2 Cathode in Solid-State Polymer Batteries

Muenir M. Besli et al.

CHEMISTRY OF MATERIALS (2019)

Add to Collection
Article Chemistry, Physical

Microstructural Modeling of Composite Cathodes for All-Solid-State Batteries

Anja Bielefeld et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2019)

Add to Collection
Article Multidisciplinary Sciences

Phase-Field Simulation of Grain Boundary Evolution In Microstructures Containing Second-Phase Particles with Heterogeneous Thermal Properties

T. F. Flint et al.

SCIENTIFIC REPORTS (2019)

Add to Collection
Article Chemistry, Physical

Oriented porous LLZO 3D structures obtained by freeze casting for battery applications

Hao Shen et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection
Article Electrochemistry

Structural Degradation of Layered Cathode Materials in Lithium-Ion Batteries Induced by Ball Milling

Taijun Pan et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)

Add to Collection
Article Chemistry, Physical

Manipulating Li2O atmosphere for sintering dense Li7La3Zr2O12 solid electrolyte

Xiao Huang et al.

ENERGY STORAGE MATERIALS (2019)

Add to Collection
Article Electrochemistry

Electrochemical Properties of Composite Cathode Using Bimodal Sized Electrolyte for All-Solid-State Batteries

Chanhwi Park et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)

Add to Collection
Review Chemistry, Physical

Li-free Cathode Materials for High Energy Density Lithium Batteries

Liping Wang et al.

JOULE (2019)

Add to Collection
Article Chemistry, Physical

A garnet structure-based all-solid-state Li battery without interface modification: resolving incompatibility issues on positive electrodes

Chih-Long Tsai et al.

SUSTAINABLE ENERGY & FUELS (2019)

Add to Collection
Article Chemistry, Physical

Computational Screening of Cathode Coatings for Solid-State Batteries

Yihan Xiao et al.

JOULE (2019)

Add to Collection
Article Electrochemistry

Controlling Ionic Transport through the PEO-LiTFSI/LLZTO Interface

Arushi Gupta et al.

ELECTROCHEMICAL SOCIETY INTERFACE (2019)

Add to Collection
Article Chemistry, Physical

Nanothin film conductivity measurements reveal interfacial influence on ion transport in polymer electrolytes

Ban Xuan Dong et al.

MOLECULAR SYSTEMS DESIGN & ENGINEERING (2019)

Add to Collection
Article Chemistry, Physical

Overcoming binder limitations of sheet-type solid-state cathodes using a solvent-free dry-film approach

Felix Hippauf et al.

ENERGY STORAGE MATERIALS (2019)

Add to Collection
Article Electrochemistry

Mechanical Stress Induced Current Focusing and Fracture in Grain Boundaries

Pallab Barai et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)

Add to Collection
Article Chemistry, Physical

High cathode utilization efficiency through interface engineering in all-solid-state lithium-metal batteries

Xianwei Guo et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection
Review Chemistry, Physical

Solid Garnet Batteries

Ning Zhao et al.

JOULE (2019)

Add to Collection
Article Electrochemistry

A Comprehensive Experimental and Modeling Study on Dissolution in Li-Ion Batteries

Yoon Koo Lee et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)

Add to Collection
Article Chemistry, Multidisciplinary

Air-stable Li3InCl6 electrolyte with high voltage compatibility for all-solid-state batteries

Xiaona Li et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

Add to Collection
Review Chemistry, Physical

Mechanical behavior of Li-ion-conducting crystalline oxide-based solid electrolytes: a brief review

Jeff Wolfenstine et al.

IONICS (2018)

Add to Collection
Article Chemistry, Multidisciplinary

Atomic-Scale Influence of Grain Boundaries on Li-Ion Conduction in Solid Electrolytes for All-Solid-State Batteries

James A. Dawson et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

Add to Collection
Article Nanoscience & Nanotechnology

Secondary-Phase Stochastics in Lithium-Ion Battery Electrodes

Aashutosh N. Mistry et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection
Article Nanoscience & Nanotechnology

High Capacity Garnet-Based All-Solid-State Lithium Batteries: Fabrication and 3D-Microstructure Resolved Modeling

Martin Finsterbusch et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection
Review Chemistry, Multidisciplinary

Progress on the Critical Parameters for Lithium-Sulfur Batteries to be Practically Viable

Sheng-Heng Chung et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Add to Collection
Article Chemistry, Multidisciplinary

3D-Printing Electrolytes for Solid-State Batteries

Dennis W. McOwen et al.

ADVANCED MATERIALS (2018)

Add to Collection
Article Physics, Applied

Growth of self-textured Ga3+-substituted Li7La3Zr2O12 ceramics by solid state reaction and their significant enhancement in ionic conductivity

Shiying Qin et al.

APPLIED PHYSICS LETTERS (2018)

Add to Collection
Article Chemistry, Multidisciplinary

Chemo-mechanical expansion of lithium electrode materials - on the route to mechanically optimized all-solid-state batteries

Raimund Koerver et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

Add to Collection
Review Chemistry, Multidisciplinary

Dissolution, migration, and deposition of transition metal ions in Li-ion batteries exemplified by Mn-based cathodes - a critical review

Chun Zhan et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

Add to Collection
Article Chemistry, Physical

Challenges regarding thin film deposition of garnet electrolytes for all-solid-state lithium batteries with high energy density

S. Lobe et al.

IONICS (2018)

Add to Collection
Article Chemistry, Physical

Li+-Ion Dynamics in beta-Li3PS4 Observed by NMR: Local Hopping and Long-Range Transport

Heike Stoeffler et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2018)

Add to Collection
Article Chemistry, Physical

Assessment of all-solid-state lithium-ion batteries

P. Braun et al.

JOURNAL OF POWER SOURCES (2018)

Add to Collection
Review Chemistry, Physical

Review on solid electrolytes for all-solid-state lithium-ion batteries

Feng Zheng et al.

JOURNAL OF POWER SOURCES (2018)

Add to Collection
Article Chemistry, Physical

Computational study of lithium nucleation tendency in Li7La3Zr2O12 (LLZO) and rational design of interlayer materials to prevent lithium dendrites

Hong-Kang Tian et al.

JOURNAL OF POWER SOURCES (2018)

Add to Collection
Article Chemistry, Multidisciplinary

Mitigating Interfacial Potential Drop of Cathode-Solid Electrolyte via Ionic Conductor Layer To Enhance Interface Dynamics for Solid Batteries

Jia-Yan Liang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

Add to Collection
Article Electrochemistry

Mesoscale Analysis of the Electrolyte-Electrode Interface in All-Solid-State Li-Ion Batteries

Feng Hao et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)

Add to Collection
Article Materials Science, Multidisciplinary

Lithium-ion conductive ceramic textile: A new architecture for flexible solid-state lithium metal batteries

Yunhui Gong et al.

MATERIALS TODAY (2018)

Add to Collection
Article Multidisciplinary Sciences

Continuous plating/stripping behavior of solid-state lithium metal anode in a 3D ion-conductive framework

Chunpeng Yang et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2018)

Add to Collection
Article Chemistry, Multidisciplinary

The effect of sintering process on lithium ionic conductivity of Li6.4Al0.2La3Zr2O12 garnet produced by solid-state synthesis

Wenjuan Xue et al.

RSC ADVANCES (2018)

Add to Collection
Article Materials Science, Multidisciplinary

Theoretical study of cubic-Li7La3Zr2O12(001)/LiCoO2(10-14) interface

Sara Panahian Jand et al.

MRS COMMUNICATIONS (2018)

Add to Collection
Article Chemistry, Physical

Mixed ionic-electronic conductor enabled effective cathode-electrolyte interface in all solid state batteries

Chengwei Wang et al.

NANO ENERGY (2018)

Add to Collection
Article Chemistry, Multidisciplinary

Viscosity, Conductivity, and Electrochemical Property of Dicyanamide Ionic Liquids

Wen-Li Yuan et al.

FRONTIERS IN CHEMISTRY (2018)

Add to Collection
Article Chemistry, Physical

Effect of Pore Connectivity on Li Dendrite Propagation within LLZO Electrolytes Observed with Synchrotron X-ray Tomography

Fengyu Shen et al.

ACS ENERGY LETTERS (2018)

Add to Collection
Article Chemistry, Physical

Structure, Chemistry, and Charge Transfer Resistance of the Interface between Li7La3Zr2O12 Electrolyte and LiCoO2 Cathode

Gulin Vardar et al.

CHEMISTRY OF MATERIALS (2018)

Add to Collection
Article Chemistry, Physical

Molecular Dynamics Studies on the Lithium Ion Conduction Behaviors Depending on Tilted Grain Boundaries with Various Symmetries in Garnet-Type Li7La3Zr2O12

Hiromasa Shiiba et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2018)

Add to Collection
Article Chemistry, Physical

Cost of automotive lithium-ion batteries operating at high upper cutoff voltages

Shabbir Ahmed et al.

JOURNAL OF POWER SOURCES (2018)

Add to Collection
Article Electrochemistry

Towards Mixed Ionic and Electronic Conducting Li-Stuffed Garnets

Alfred Junio Samson et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)

Add to Collection
Article Multidisciplinary Sciences

Niobium tungsten oxides for high-rate lithium-ion energy storage

Kent J. Griffith et al.

NATURE (2018)

Add to Collection
Article Chemistry, Physical

Chemomechanical interplay of layered cathode materials undergoing fast charging in lithium batteries

Sihao Xia et al.

NANO ENERGY (2018)

Add to Collection
Article Chemistry, Physical

Molecular Dynamics Simulations of Lithium-Doped Ionic-Liquid Electrolytes

Promit Ray et al.

JOURNAL OF PHYSICAL CHEMISTRY B (2018)

Add to Collection
Article Chemistry, Multidisciplinary

Inducing High Ionic Conductivity in the Lithium Superionic Argyrodites Li6+x P(1-x)Ge(x)S(5)l for All -Solid-State Batteries

Marvin A. Kraft et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

Add to Collection
Article Chemistry, Physical

Effects of Li6.75La3Zr1.75Ta0.25O12 on chemical and electrochemical properties of polyacrylonitrile-based solid electrolytes

Xue Zhang et al.

SOLID STATE IONICS (2018)

Add to Collection
Article Materials Science, Multidisciplinary

Mechanical instability of electrode-electrolyte interfaces in solid-state batteries

Giovanna Bucci et al.

PHYSICAL REVIEW MATERIALS (2018)

Add to Collection
Article Chemistry, Physical

All-in-one lithium-sulfur battery enabled by a porous-dense-porous garnet architecture

Shaomao Xu et al.

ENERGY STORAGE MATERIALS (2018)

Add to Collection
Article Chemistry, Physical

Analysis of Diffusion in Solid-State Electrolytes through MD Simulations, Improvement of the Li-Ion Conductivity in β-Li3PS4 as an Example

Niek J. J. de Klerk et al.

ACS APPLIED ENERGY MATERIALS (2018)

Add to Collection
Review Chemistry, Physical

Electrolyte and Interface Engineering for Solid-State Sodium Batteries

Yong Lu et al.

JOULE (2018)

Add to Collection
Article Chemistry, Physical

Problem, Status, and Possible Solutions for Lithium Metal Anode of Rechargeable Batteries

Sheng S. Zhang

ACS APPLIED ENERGY MATERIALS (2018)

Add to Collection
Article Chemistry, Physical

Mechanism Study on the Interfacial Stability of a Lithium Garnet-Type Oxide Electrolyte against Cathode Materials

Nian Zhang et al.

ACS APPLIED ENERGY MATERIALS (2018)

Add to Collection
Article Chemistry, Physical

3D lithium metal anodes hosted in asymmetric garnet frameworks toward high energy density batteries

Boyang Liu et al.

ENERGY STORAGE MATERIALS (2018)

Add to Collection
Article Chemistry, Physical

Interphase Engineering Enabled All-Ceramic Lithium Battery

Fudong Han et al.

JOULE (2018)

Add to Collection
Article Electrochemistry

Resolving the Discrepancy in Tortuosity Factor Estimation for Li-Ion Battery Electrodes through Micro-Macro Modeling and Experiment

Francois L. E. Usseglio-Viretta et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)

Add to Collection
Article Nanoscience & Nanotechnology

Cation Mixing Properties toward Co Diffusion at the LiCoO2 Cathode/Sulfide Electrolyte Interface in a Solid-State Battery

Jun Haruyama et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection
Article Chemistry, Physical

First-Principles Modeling of Mn(II) Migration above and Dissolution from LixMn2O4 (001) Surfaces

Kevin Leung

CHEMISTRY OF MATERIALS (2017)

Add to Collection
Article Materials Science, Ceramics

Cathode-electrolyte material interactions during manufacturing of inorganic solid-state lithium batteries

Sven Uhlenbruck et al.

JOURNAL OF ELECTROCERAMICS (2017)

Add to Collection
Article Chemistry, Physical

Negating interfacial impedance in garnet-based solid-state Li metal batteries

Xiaogang Han et al.

NATURE MATERIALS (2017)

Add to Collection
Article Chemistry, Multidisciplinary

Three-dimensional bilayer garnet solid electrolyte based high energy density lithium metal-sulfur batteries

Kun (Kelvin) Fu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2017)

Add to Collection
Article Chemistry, Physical

Garnet-type oxide electrolyte with novel porous-dense bilayer configuration for rechargeable all-solid-state lithium batteries

Yaoyu Ren et al.

IONICS (2017)

Add to Collection
Article Chemistry, Physical

Ga-substituted Li7La3Zr2O12: An investigation based on grain coarsening in garnet-type lithium ion conductors

Changlong Li et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Add to Collection
Article Chemistry, Physical

Grain boundary modification to suppress lithium penetration through garnet-type solid electrolyte

Rajendra Hongahally Basappa et al.

JOURNAL OF POWER SOURCES (2017)

Add to Collection
Article Chemistry, Multidisciplinary

Synergistic Coupling between Li6.75La3Zr1.75Ta0.25O12 and Poly(vinylidene fluoride) Induces High Ionic Conductivity, Mechanical Strength, and Thermal Stability of Solid Composite Electrolytes

Xue Zhang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)

Add to Collection
Article Electrochemistry

On Leakage Current Measured at High Cell Voltages in Lithium-Ion Batteries

Nicole R. Vadivel et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)

Add to Collection
Article Electrochemistry

Electronic and Ionic Conductivities of LiNi1/3Mn1/3Co1/3O2-Li3PS4 Positive Composite Electrodes for All-Solid-State Lithium Batteries

Takamasa Asano et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)

Add to Collection
Article Electrochemistry

Mechanical and Structural Degradation of LiNixMnyCozO2 Cathode in Li-Ion Batteries: An Experimental Study

Rong Xu et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)

Add to Collection
Article Electrochemistry

X-ray Photoelectron Spectroscopy and AC Impedance Spectroscopy Studies of Li-La-Zr-O Solid Electrolyte Thin Film/LiCoO2 Cathode Interface for All-Solid-State Li Batteries

Mina Zarabian et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)

Add to Collection
Article Electrochemistry

Tris(trimethylsilyl) Phosphite (TMSPi) and Triethyl Phosphite (TEPi) as Electrolyte Additives for Lithium Ion Batteries: Mechanistic Insights into Differences during LiNi0.5Mn0.3Co0.2O2-Graphite Full Cell Cycling

Cameron Peebles et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)

Add to Collection
Article Materials Science, Ceramics

Mechanical and physical properties of LiNi0.33Mn0.33Co0.33O2 (NMC)

Eric Jianfeng Cheng et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2017)

Add to Collection
Review Nanoscience & Nanotechnology

Reviving the lithium metal anode for high-energy batteries

Dingchang Lin et al.

NATURE NANOTECHNOLOGY (2017)

Add to Collection
Article Chemistry, Physical

Space charge storage in composites: thermodynamics

Chia-Chin Chen et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2017)

Add to Collection
Review Materials Science, Multidisciplinary

Ion conduction and redistribution at grain boundaries in oxide systems

Giuliano Gregori et al.

PROGRESS IN MATERIALS SCIENCE (2017)

Add to Collection
Article Chemistry, Physical

Mechanism of Lithium Metal Penetration through Inorganic Solid Electrolytes

Lukas Porz et al.

ADVANCED ENERGY MATERIALS (2017)

Add to Collection
Article Chemistry, Physical

Controlling and correlating the effect of grain size with the mechanical and electrochemical properties of Li7La3Zr2O12 solid-state electrolyte

Asma Sharafi et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection
Article Chemistry, Physical

Modeling of internal mechanical failure of all-solidstate batteries during electrochemical cycling, and implications for battery design

Giovanna Bucci et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection
Article Chemistry, Physical

The effect of the LiCoO2/Li7La3Zr2O12 ratio on the structure and electrochemical properties of nanocomposite cathodes for all-solid-state lithium batteries

Hiroaki Wakayama et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection
Article Chemistry, Physical

Redox-active cathode interphases in solid-state batteries

Raimund Koerver et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection
Article Chemistry, Physical

(Electro)chemical expansion during cycling: monitoring the pressure changes in operating solid-state lithium batteries

Wenbo Zhang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection
Article Multidisciplinary Sciences

Lattice-geometry effects in garnet solid electrolytes: a lattice-gas Monte Carlo simulation study

Benjamin J. Morgan

ROYAL SOCIETY OPEN SCIENCE (2017)

Add to Collection
Review Chemistry, Multidisciplinary

More Reliable Lithium-Sulfur Batteries: Status, Solutions and Prospects

Ruopian Fang et al.

ADVANCED MATERIALS (2017)

Add to Collection
Article Materials Science, Ceramics

Elastic properties of lithium cobalt oxide (LiCoO2)

Eric Jianfeng Cheng et al.

JOURNAL OF ASIAN CERAMIC SOCIETIES (2017)

Add to Collection
Article Nanoscience & Nanotechnology

Phase-Field Based Multiscale Modeling of Heterogeneous Solid Electrolytes: Applications to Nanoporous Li3PS4

Jia-Mian Hu et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection
Article Chemistry, Physical

Grain Boundary Contributions to Li-Ion Transport in the Solid Electrolyte Li7La3Zr2O12 (LLZO)

Seungho Yu et al.

CHEMISTRY OF MATERIALS (2017)

Add to Collection
Article Chemistry, Physical

Capacity Fade in Solid-State Batteries: Interphase Formation and Chemomechanical Processes in Nickel-Rich Layered Oxide Cathodes and Lithium Thiophosphate Solid Electrolytes

Raimund Koerver et al.

CHEMISTRY OF MATERIALS (2017)

Add to Collection
Article Nanoscience & Nanotechnology

Stabilization of Garnet/Liquid Electrolyte Interface Using Superbase Additives for Hybrid Li Batteries

Biyi Xu et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection
Review Chemistry, Physical

High performance lithium metal anode: Progress and prospects

Jialiang Lang et al.

ENERGY STORAGE MATERIALS (2017)

Add to Collection
Article Electrochemistry

Thermal Stability of Various Cathode Materials against Li6.25Al0.25La3Zr2O12 Electrolyte

Jungo Wakasugi et al.

ELECTROCHEMISTRY (2017)

Add to Collection
Article Chemistry, Physical

Elastic Properties of the Solid Electrolyte Li7La3Zr2O12 (LLZO)

Seungho Yu et al.

CHEMISTRY OF MATERIALS (2016)

Add to Collection
Article Chemistry, Physical

Interface Stability in Solid-State Batteries

William D. Richards et al.

CHEMISTRY OF MATERIALS (2016)

Add to Collection
Article Electrochemistry

Elastic Properties of Alkali Superionic Conductor Electrolytes from First Principles Calculations

Zhi Deng et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)

Add to Collection
Article Nanoscience & Nanotechnology

About the Compatibility between High Voltage Spinel Cathode Materials and Solid Oxide Electrolytes as a Function of Temperature

Lincoln Miara et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Add to Collection
Article Chemistry, Physical

Electrochemical Nature of the Cathode Interface for a Solid-State Lithium-Ion Battery: Interface between LiCoO2 and Garnet-Li7La3Zr2O12

Kyusung Park et al.

CHEMISTRY OF MATERIALS (2016)

Add to Collection
Article Chemistry, Physical

Three-Dimensional Bicontinuous Nanocomposite from a Self Assembled Block Copolymer for a High-Capacity All-Solid-State Lithium Battery Cathode

Hiroaki Wakayama et al.

CHEMISTRY OF MATERIALS (2016)

Add to Collection
Article Materials Science, Multidisciplinary

Smoothed Boundary Method for simulating bulk and grain boundary transport in complex polycrystalline microstructures

Hui-Chia Yu et al.

COMPUTATIONAL MATERIALS SCIENCE (2016)

Add to Collection
Review Electrochemistry

Lithium Dendrite Formation on a Lithium Metal Anode from Liquid, Polymer and Solid Electrolytes

Yasuo Takeda et al.

ELECTROCHEMISTRY (2016)

Add to Collection
Article Electrochemistry

Mechanical and Electrochemical Response of a LiCoO2 Cathode using Reconstructed Microstructures

Hector Mendoza et al.

ELECTROCHIMICA ACTA (2016)

Add to Collection
Article Chemistry, Physical

Multistep sintering to synthesize fast lithium garnets

Biyi Xu et al.

JOURNAL OF POWER SOURCES (2016)

Add to Collection
Article Chemistry, Physical

Radio frequency magnetron sputtering of Li7La3Zr2O12 thin films for solid-state batteries

S. Lobe et al.

JOURNAL OF POWER SOURCES (2016)

Add to Collection
Article Chemistry, Physical

Achieving high capacity in bulk-type solid-state lithium ion battery based on Li6.75La3Zr1.75Ta0.25O12 electrolyte: Interfacial resistance

Ting Liu et al.

JOURNAL OF POWER SOURCES (2016)

Add to Collection
Article Materials Science, Ceramics

The Effect of Relative Density on the Mechanical Properties of Hot-Pressed Cubic Li7La3Zr2O12

Yunsung Kim et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2016)

Add to Collection
Article Chemistry, Multidisciplinary

Transition from Superlithiophobicity to Superlithiophilicity of Garnet Solid-State Electrolyte

Wei Luo et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)

Add to Collection
Article Electrochemistry

Influence of Electrolyte Modulus on the Local Current Density at a Dendrite Tip on a Lithium Metal Electrode

Katherine J. Harry et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)

Add to Collection
Article Electrochemistry

Characterization of Electronic and Ionic Transport in Li1-xNi0.33Mn0.33Co0.33O2 (NMC333) and Li1-xNi0.50Mn0.20Co0.30O2 (NMC523) as a Function of Li Content

Ruhul Amin et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)

Add to Collection
Article Chemistry, Multidisciplinary

Dynamic formation of a solid-liquid electrolyte interphase and its consequences for hybrid-battery concepts

Martin R. Busche et al.

NATURE CHEMISTRY (2016)

Add to Collection
Article Physics, Multidisciplinary

Effects of Sublattice Symmetry and Frustration on Ionic Transport in Garnet Solid Electrolytes

Boris Kozinsky et al.

PHYSICAL REVIEW LETTERS (2016)

Add to Collection
Article Materials Science, Multidisciplinary

Sol-gel synthesis of thin solid Li7La3Zr2O12 electrolyte films for Li-ion batteries

Martin Bitzer et al.

THIN SOLID FILMS (2016)

Add to Collection
Article Chemistry, Physical

Mesoscopic Framework Enables Facile Ionic Transport in Solid Electrolytes for Li Batteries

Cheng Ma et al.

ADVANCED ENERGY MATERIALS (2016)

Add to Collection
Article Chemistry, Physical

Interface-Engineered All-Solid-State Li-Ion Batteries Based on Garnet-Type Fast Li+ Conductors

Jan van den Broek et al.

ADVANCED ENERGY MATERIALS (2016)

Add to Collection
Article Chemistry, Physical

First principles study on electrochemical and chemical stability of solid electrolyte-electrode interfaces in all-solid-state Li-ion batteries

Yizhou Zhu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

Add to Collection
Article Chemistry, Physical

A high-performance solid-state lithium-oxygen battery with a ceramic-carbon nanostructured electrode

Xingbao Zhu et al.

NANO ENERGY (2016)

Add to Collection
Article Chemistry, Multidisciplinary

Capacity Fade Analysis of Sulfur Cathodes in Lithium-Sulfur Batteries

Jianhua Yan et al.

ADVANCED SCIENCE (2016)

Add to Collection
Editorial Material Energy & Fuels

A solid future for battery development

Juergen Janek et al.

NATURE ENERGY (2016)

Add to Collection
Article Materials Science, Ceramics

Effect of Li3BO3 Additive on Densification and Ion Conductivity of Garnet-Type Li7La3Zr2O12 Solid Electrolytes of All-Solid-State Lithium-Ion Batteries

Ran-Hee Shin et al.

JOURNAL OF THE KOREAN CERAMIC SOCIETY (2016)

Add to Collection
Article Chemistry, Physical

Chemical compatibility between garnet-like solid state electrolyte Li6.75La3Zr1.75Ta0.25O12 and major commercial lithium battery cathode materials

Yaoyu Ren et al.

JOURNAL OF MATERIOMICS (2016)

Add to Collection
Article Nanoscience & Nanotechnology

Effect of Surface Microstructure on Electrochemical Performance of Garnet Solid Electrolytes

Lei Cheng et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

Add to Collection
Article Nanoscience & Nanotechnology

Origin of Outstanding Stability in the Lithium Solid Electrolyte Materials: Insights from Thermodynamic Analyses Based on First-Principles Calculations

Yizhou Zhu et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

Add to Collection
Article Chemistry, Physical

Site Occupation of Ga and Al in Stabilized Cubic Li7-3(x plus y)GaxAlyLa3Zr2O12 Garnets As Deduced from 27AI and 71Ga MAS NMR at Ultrahigh Magnetic Fields

Daniel Rettenwander et al.

CHEMISTRY OF MATERIALS (2015)

Add to Collection
Article Chemistry, Physical

First-Principles Studies on Cation Dopants and ElectrolytelCathode Interphases for Lithium Garnets

Lincoln J. Miara et al.

CHEMISTRY OF MATERIALS (2015)

Add to Collection
Article Electrochemistry

Direct observation of lithium dendrites inside garnet-type lithium-ion solid electrolyte

Yaoyu Ren et al.

ELECTROCHEMISTRY COMMUNICATIONS (2015)

Add to Collection
Article Chemistry, Inorganic & Nuclear

Highly Conductive Li Garnets by a Multielement Doping Strategy

Xia Tong et al.

INORGANIC CHEMISTRY (2015)

Add to Collection
Article Chemistry, Physical

Thermal expansion in the garnet-type solid electrolyte (Li7-xAlx/3)La3Zr2O12 as a function of Al content

Aude A. Hubaud et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2015)

Add to Collection
Article Chemistry, Physical

Thermodynamically Consistent Model for Space-Charge-Layer Formation in a Solid Electrolyte

Stefanie Braun et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2015)

Add to Collection
Article Chemistry, Physical

Preparation of lithium ion conductive Al-doped Li7La3Zr2O12 thin films by a sol-gel process

Kiyoharu Tadanaga et al.

JOURNAL OF POWER SOURCES (2015)

Add to Collection
Article Chemistry, Physical

Transparent cubic garnet-type solid electrolyte of Al2O3-doped Li7La3Zr2O12

Yosuke Suzuki et al.

SOLID STATE IONICS (2015)

Add to Collection
Article Chemistry, Physical

A Tale of Two Sites: On Defining the Carrier Concentration in Garnet-Based Ionic Conductors for Advanced Li Batteries

Travis Thompson et al.

ADVANCED ENERGY MATERIALS (2015)

Add to Collection
Article Chemistry, Physical

A shortcut to garnet-type fast Li-ion conductors for all-solid state batteries

Semih Afyon et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

Add to Collection
Article Materials Science, Ceramics

Microstructure and Li-Ion Conductivity of Hot- Pressed Cubic Li7La3Zr2O12

Isabel N. David et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2015)

Add to Collection
Article Chemistry, Physical

Space-Charge Layer Effect at Interface between Oxide Cathode and Sulfide Electrolyte in All-Solid-State Lithium-Ion Battery

Jun Haruyama et al.

CHEMISTRY OF MATERIALS (2014)

Add to Collection
Article Chemistry, Physical

Co-sinterable lithium garnet-type oxide electrolyte with cathode for all-solid-state lithium ion battery

Shingo Ohta et al.

JOURNAL OF POWER SOURCES (2014)

Add to Collection
Article Chemistry, Physical

In-situ Li7La3Zr2O12/LiCoO2 interface modification for advanced all-solid-state battery

Takehisa Kato et al.

JOURNAL OF POWER SOURCES (2014)

Add to Collection
Article Electrochemistry

Quantifying Polarization Losses in an Organic Liquid Electrolyte/Single Ion Conductor Interface

Amal Mehrotra et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2014)

Add to Collection
Article Chemistry, Physical

The origin of high electrolyte-electrode interfacial resistances in lithium cells containing garnet type solid electrolytes

Lei Cheng et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2014)

Add to Collection
Article Chemistry, Physical

Effect of microstructure and surface impurity segregation on the electrical and electrochemical properties of dense Al-substituted Li7La3Zr2O12

Lei Cheng et al.

JOURNAL OF MATERIALS CHEMISTRY A (2014)

Add to Collection
Article Electrochemistry

Resolving the Grain Boundary and Lattice Impedance of Hot-Pressed Li7La3Zr2O12 Garnet Electrolytes

Wyatt E. Tenhaeff et al.

CHEMELECTROCHEM (2014)

Add to Collection
Article Chemistry, Physical

Thermal expansion in lithium manganese oxide spinels Li[LixMn2-x]O4 with 0 ≤ x ≤ 1/3

Kazuhiko Mukai et al.

JOURNAL OF POWER SOURCES (2013)

Add to Collection
Article Chemistry, Physical

Stabilization-of cubic lithium-stuffed garnets of the type Li7La3Zr2O12 by addition of gallium

Hany El Shinawi et al.

JOURNAL OF POWER SOURCES (2013)

Add to Collection
Article Chemistry, Physical

All-solid-state lithium ion battery using garnet-type oxide and Li3BO3 solid electrolytes fabricated by screen-printing

Shingo Ohta et al.

JOURNAL OF POWER SOURCES (2013)

Add to Collection
Article Chemistry, Physical

Comparison of the structural and electrochemical properties of layered Li[NixCoyMnz]O2 (x=1/3, 0.5, 0.6, 0.7, 0.8 and 0.85) cathode material for lithium-ion batteries

Hyung-Joo Noh et al.

JOURNAL OF POWER SOURCES (2013)

Add to Collection
Article Chemistry, Multidisciplinary

The Li-Ion Rechargeable Battery: A Perspective

John B. Goodenough et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2013)

Add to Collection
Article Electrochemistry

Capacity Fade Model for Spinel LiMn2O4 Electrode

Yiling Dai et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2013)

Add to Collection
Article Electrochemistry

A Comprehensive Capacity Fade Model and Analysis for Li-Ion Batteries

Xianke Lin et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2013)

Add to Collection
Article Nanoscience & Nanotechnology

Synthesis of nano-scale fast ion conducting cubic Li7La3Zr2O12

Jeff Sakamoto et al.

NANOTECHNOLOGY (2013)

Add to Collection
Article Chemistry, Physical

Observation of Microstructural Evolution in Li Battery Cathode Oxide Particles by In Situ Electron Microscopy

Dean J. Miller et al.

ADVANCED ENERGY MATERIALS (2013)

Add to Collection
Article Nanoscience & Nanotechnology

Commentary: The Materials Project: A materials genome approach to accelerating materials innovation

Anubhav Jain et al.

APL MATERIALS (2013)

Add to Collection
Article Materials Science, Multidisciplinary

Electron microscopy characterization of hot-pressed Al substituted Li7La3Zr2O12

J. Wolfenstine et al.

JOURNAL OF MATERIALS SCIENCE (2012)

Add to Collection
Article Chemistry, Physical

Enhancing Li Ion Conductivity of Garnet-Type Li5La3Nb2O12 by Y- and Li-Codoping: Synthesis, Structure, Chemical Stability, and Transport Properties

Sumaletha Narayanan et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2012)

Add to Collection
Article Chemistry, Physical

Effect of substitution (Ta, Al, Ga) on the conductivity of Li7La3Zr2O12

J. L. Allen et al.

JOURNAL OF POWER SOURCES (2012)

Add to Collection
Article Chemistry, Physical

Electrochemical performance of an all-solid-state lithium ion battery with garnet-type oxide electrolyte

Shingo Ohta et al.

JOURNAL OF POWER SOURCES (2012)

Add to Collection
Article Electrochemistry

Re-Deposition of Manganese Species on Spinel LiMn2O4 Electrode after Mn Dissolution

Daesoo Kim et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2012)

Add to Collection
Article Chemistry, Physical

From order to disorder: The structure of lithium-conducting garnets Li7-xLa3TaxZr2-xO12 (x=0-2)

Alan Logeat et al.

SOLID STATE IONICS (2012)

Add to Collection
Article Chemistry, Physical

Mechanism of ion transport in PEO/LiTFSI complexes: Effect of temperature, molecular weight and end groups

D. Devaux et al.

SOLID STATE IONICS (2012)

Add to Collection
Article Chemistry, Physical

The role of Al and Li concentration on the formation of cubic garnet solid electrolyte of nominal composition Li7La3Zr2O12

Ezhiyl Rangasamy et al.

SOLID STATE IONICS (2012)

Add to Collection
Article Electrochemistry

High lithium ion conductive Li7La3Zr2O12 by inclusion of both Al and Si

Shota Kumazaki et al.

ELECTROCHEMISTRY COMMUNICATIONS (2011)

Add to Collection
Article Chemistry, Inorganic & Nuclear

Crystal Chemistry and Stability of Li7La3Zr2O12 Garnet: A Fast Lithium-Ion Conductor

Charles A. Geiger et al.

INORGANIC CHEMISTRY (2011)

Add to Collection
Article Chemistry, Physical

Fabrication of all-solid-state lithium battery with lithium metal anode using Al2O3-added Li7La3Zr2O12 solid electrolyte

Masashi Kotobuki et al.

JOURNAL OF POWER SOURCES (2011)

Add to Collection
Article Chemistry, Physical

Characterization of the interface between LiCoO2 and Li7La3Zr2O12 in an all-solid-state rechargeable lithium battery

Ki Hyun Kim et al.

JOURNAL OF POWER SOURCES (2011)

Add to Collection
Article Chemistry, Physical

High lithium ionic conductivity in the garnet-type oxide Li7-X La3(Zr2-X, NbX)O12 (X=0-2)

Shingo Ohta et al.

JOURNAL OF POWER SOURCES (2011)

Add to Collection
Article Chemistry, Physical

Al-doped Li7La3Zr2O12 synthesized by a polymerized complex method

Ying Jin et al.

JOURNAL OF POWER SOURCES (2011)

Add to Collection
Article Electrochemistry

Modeling All-Solid-State Li-Ion Batteries

D. Danilov et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2011)

Add to Collection
Article Chemistry, Physical

An advanced model framework for solid electrolyte intercalation batteries

Manuel Landstorfer et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2011)

Add to Collection
Article Chemistry, Physical

Structure and dynamics of the fast lithium ion conductor Li7La3Zr2O12

Henrik Buschmann et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2011)

Add to Collection
Article Chemistry, Physical

Synthesis of garnet-type Li7-xLa3Zr2O12-1/2x and its stability in aqueous solutions

Yuta Shimonishi et al.

SOLID STATE IONICS (2011)

Add to Collection
Article Chemistry, Physical

Effect of molecular weight on conductivity of polymer electrolytes

Alexander A. Teran et al.

SOLID STATE IONICS (2011)

Add to Collection
Article Metallurgy & Metallurgical Engineering

First Principles Calculation of the Thermal Volume Expansion Coefficient of Tetragonal Zircon Dioxide

Simon Lamowski et al.

STEEL RESEARCH INTERNATIONAL (2011)

Add to Collection
Article Materials Science, Multidisciplinary

Mechanical characterization of LiPON films using nanoindentation

E. G. Herbert et al.

THIN SOLID FILMS (2011)

Add to Collection
Article Chemistry, Multidisciplinary

Lithium-ion Transfer at the Interface between Solid and Liquid Electrolytes under Applying DC Voltage

Fumihiro Sagane et al.

CHEMISTRY LETTERS (2010)

Add to Collection
Article Chemistry, Physical

Intefacial Observation between LiCoO2 Electrode and Li2S-P2S5 Solid Electrolytes of All-Solid-State Lithium Secondary Batteries Using Transmission Electron Microscopy

Atsushi Sakuda et al.

CHEMISTRY OF MATERIALS (2010)

Add to Collection
Review Chemistry, Physical

A review of conduction phenomena in Li-ion batteries

Myounggu Park et al.

JOURNAL OF POWER SOURCES (2010)

Add to Collection
Review Electrochemistry

Cathode materials for solid oxide fuel cells: a review

Chunwen Sun et al.

JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2010)

Add to Collection
Review Engineering, Chemical

Mixed ionic-electronic conducting (MIEC) ceramic-based membranes for oxygen separation

J. Sunarso et al.

JOURNAL OF MEMBRANE SCIENCE (2008)

Add to Collection
Article Chemistry, Multidisciplinary

Fast lithium ion conduction in garnet-type Li7La3Zr2O12

Ramaswamy Murugan et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2007)

Add to Collection
Article Materials Science, Multidisciplinary

Computer modeling and simulation of solid-state sintering: A phase field approach

YU Wang

ACTA MATERIALIA (2006)

Add to Collection
Review Chemistry, Physical

Ageing mechanisms in lithium-ion batteries

J Vetter et al.

JOURNAL OF POWER SOURCES (2005)

Add to Collection
Article Chemistry, Physical

Li+ and Na+ transfer through interfaces between inorganic solid electrolytes and polymer or liquid electrolytes

F Sagane et al.

JOURNAL OF POWER SOURCES (2005)

Add to Collection
Article Chemistry, Physical

Investigations on electrical conductivity and chemical compatibility between fast lithium ion conducting garnet-like Li6BaLa2Ta2O12 and lithium battery cathodes

V Thangadurai et al.

JOURNAL OF POWER SOURCES (2005)

Add to Collection
Article Electrochemistry

Lithium-ion transfer at the interface between lithium-ion conductive ceramic electrolyte and liquid electrolyte - A key to enhancing the rate capability of lithium-ion batteries

T Abe et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2005)

Add to Collection
Article Electrochemistry

Development of first principles capacity fade model for Li-ion cells

P Ramadass et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2004)

Add to Collection
Article Electrochemistry

A mathematical model for the lithium-ion negative electrode solid electrolyte interphase

J Christensen et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2004)

Add to Collection
Article Electrochemistry

PEO-based electrolyte membranes based on LiBC4O8 salt

GB Appetecchi et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2004)

Add to Collection
Article Chemistry, Physical

Al2O3-coated LiCoO2 as cathode material for lithium ion batteries

LJ Liu et al.

SOLID STATE IONICS (2002)

Add to Collection
Article Chemistry, Physical

Simple Method to Determine Electronic and Ionic Components of the Conductivity in Mixed Conductors A Review

R. A. Huggins

IONICS (2002)

Add to Collection
Webinars Posters Questions Hubs Funding Journals Papers Connect Collections Reviewers About Us FAQs Mobile App Privacy Policy Terms of Use
© Peeref 2019-2024. All rights reserved.