4.8 Article

Break-In Bad: On the Conditioning of Fuel Cell Nanoalloy Catalysts

Related references

Note: Only part of the references are listed.
Article Chemistry, Physical

Understanding the Crucial Significance of the Temperature and Potential Window on the Stability of Carbon Supported Pt-Alloy Nanoparticles as Oxygen Reduction Reaction Electrocatalysts

Tina Dukic et al.

Summary: This research provides a study on the stability of carbon-supported intermetallic Pt-alloy electrocatalysts and determines the effects of temperature and potential window on metal dissolution. The findings contradict the commonly accepted hypothesis that Pt dissolution is not significantly affected by temperature, and highlight the critical role of temperature in governing Pt stability and metal retention in Pt-alloy electrocatalysts. Additionally, the study shows that the rate of Pt redeposition increases with temperature, providing insight into the temperature-dependent kinetics of Pt stability.

ACS CATALYSIS (2022)

Editorial Material Chemistry, Physical

Benchmarking Fuel Cell Electrocatalysts Using Gas Diffusion Electrodes: Inter-lab Comparison and Best Practices

Konrad Ehelebe et al.

ACS ENERGY LETTERS (2022)

Review Chemistry, Physical

Advances in rapid and effective break-in/conditioning/recovery of automotive PEMFC stacks

Shyam S. Kocha et al.

Summary: This article discusses the conditioning process of automotive proton exchange membrane fuel cell stacks, focusing on a short, energy-efficient, cost-effective, and practical conditioning method. Significant advances have been made in shortening the conditioning time to 4 hours or less through continuous research.

CURRENT OPINION IN ELECTROCHEMISTRY (2022)

Article Chemistry, Physical

Importance of Chemical Activation and the Effect of Low Operation Voltage on the Performance of Pt-Alloy Fuel Cell Electrocatalysts

Matija Gatalo et al.

Summary: This study systematically addresses the challenges of synthesis, activation, and stability of Pt-alloy electrocatalysts. It highlights the crucial importance of the chemical activation step and provides a simple method to distinguish the degree of activation. Additionally, the study presents clear evidence on the direct impact of the lower voltage limit on the stability of electrocatalysts.

ACS APPLIED ENERGY MATERIALS (2022)

Article Chemistry, Multidisciplinary

Electrochemical Strain Dynamics in Noble Metal Nanocatalysts

Raphael Chattot et al.

Summary: The study reveals the widespread feedback of nanocatalyst strain on various electrochemical processes during cyclic voltammetry experiments, challenging and expanding the current understanding of practical nanocatalysts behavior in electrochemical environments. The reported electrochemical strain provides experimental access to nanocatalysts absorption and adsorption trends, offering new insights into reactivity and stability descriptors.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

Article Multidisciplinary Sciences

Resolving the nanoparticles' structure-property relationships at the atomic level: a study of Pt-based electrocatalysts

Leonard Jean Moriau et al.

Summary: The complexity of commercially available platinum-based electrocatalysts and their electrochemical behavior has been studied, revealing challenges in understanding the structure-property relationships. A bottom-up approach has been introduced to provide a new level of understanding of the structure-stability relationships of nanoparticulate systems.

ISCIENCE (2021)

Review Thermodynamics

Activation mechanisms in the catalyst coated membrane of PEM fuel cells

Klaere Christmann et al.

Summary: This review focuses on the activation process in polymer electrolyte membrane fuel cells and the mechanisms behind performance improvement during initial operation. It was found that the main mechanisms during activation include removal of solvents from production and changes in the catalyst layer ionomer and membrane surface.

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2021)

Article Chemistry, Physical

Disclosing Pt-Bimetallic Alloy Nanoparticle Surface Lattice Distortion with Electrochemical Probes

Raphael Chattot et al.

ACS ENERGY LETTERS (2020)

Article Chemistry, Physical

Building Practical Descriptors for Defect Engineering of Electrocatalytic Materials

Raphael Chattot et al.

ACS CATALYSIS (2020)

Review Chemistry, Physical

Integrating nanostructured Pt-based electrocatalysts in proton exchange membrane fuel cells

Alvin Ly et al.

JOURNAL OF POWER SOURCES (2020)

Article Electrochemistry

CO-assisted ex-situ chemical activation of Pt-Cu/C oxygen reduction reaction electrocatalyst

Matija Gatalo et al.

ELECTROCHIMICA ACTA (2019)

Article Electrochemistry

Evaluating Electrocatalysts at Relevant Currents in a Half-Cell: The Impact of Pt Loading on Oxygen Reduction Reaction

Konrad Ehelebe et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)

Article Chemistry, Physical

Comparison of Pt-Cu/C with Benchmark Pt-Co/C: Metal Dissolution and Their Surface Interactions

Matija Gatalo et al.

ACS APPLIED ENERGY MATERIALS (2019)

Article Chemistry, Physical

Probing the Dynamics of Platinum Surface Oxides in Fuel Cell Catalyst Layers Using in Situ X-ray Diffraction

Isaac Martens et al.

ACS APPLIED ENERGY MATERIALS (2019)

Article Chemistry, Multidisciplinary

Structural Reorganization of Pt(111) Electrodes by Electrochemical Oxidation and Reduction

Martin Ruge et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)

Article Electrochemistry

Key Considerations for High Current Fuel Cell Catalyst Testing in an Electrochemical Half-Cell

Blaise A. Pinaud et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)

Article Electrochemistry

Pt oxide and oxygen reduction at Pt(111) studied by surface X-ray diffraction

Jakub Drnec et al.

ELECTROCHEMISTRY COMMUNICATIONS (2017)

Article Electrochemistry

Unveiling the crucial role of temperature on the stability of oxygen reduction reaction electrocatalysts

Laetitia Dubau et al.

ELECTROCHEMISTRY COMMUNICATIONS (2016)

Editorial Material Multidisciplinary Sciences

Toward sustainable fuel cells

Ifan Erfyl Lester Stephens et al.

SCIENCE (2016)

Review Nanoscience & Nanotechnology

Nanostructured electrocatalysts with tunable activity and selectivity

Hemma Mistry et al.

NATURE REVIEWS MATERIALS (2016)

Article Chemistry, Multidisciplinary

Record activity and stability of dealloyed bimetallic catalysts for proton exchange membrane fuel cells

Binghong Han et al.

ENERGY & ENVIRONMENTAL SCIENCE (2015)

Article Multidisciplinary Sciences

Finding optimal surface sites on heterogeneous catalysts by counting nearest neighbors

Federico Calle-Vallejo et al.

SCIENCE (2015)

Article Chemistry, Applied

Water dissociation on well-defined platinum surfaces: The electrochemical perspective

Maria J. T. C. van der Niet et al.

CATALYSIS TODAY (2013)

Article Chemistry, Analytical

Impact of film drying procedures on RDE characterization of Pt/VC electrocatalysts

Yannick Garsany et al.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2011)

Review Chemistry, Physical

A review of accelerated conditioning for a polymer electrolyte membrane fuel cell

Xiao-Zi Yuan et al.

JOURNAL OF POWER SOURCES (2011)

Article Chemistry, Analytical

Analysis of temperature effects on hydrogen and OH adsorption on Pt(1 1 1), Pt(1 0 0) and Pt(1 1 0) by means of Gibbs thermodynamics

Nuria Garcia-Araez et al.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2010)

Article Chemistry, Physical

Examination of the activity and durability of PEMFC catalysts in liquid electrolytes

Ikuma Takahashi et al.

JOURNAL OF POWER SOURCES (2010)

Article Multidisciplinary Sciences

Improved oxygen reduction activity on Pt3Ni(111) via increased surface site availability

Vojislav R. Stamenkovic et al.

SCIENCE (2007)

Article Chemistry, Analytical

The oxygen reduction reaction on a Pt/carbon fuel cell catalyst in the presence of chloride anions

TJ Schmidt et al.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2001)