☆ 4.4 Article

Theoretical study on fabrication of sub-wavelength structures via combining low-order guided mode interference lithography with sample rotation

JOURNAL OF OPTICS (2023)

Related references

Note: Only part of the references are listed.

Article Physics, Applied

Theoretical fabrication of subwavelength structures by surface plasmon interference based on complementary grating

Xiangxian Wang et al.

Summary: This paper presents a surface plasmon interference lithography technique based on the complementary grating for fabricating subwavelength structures. The optimal parameters of the complementary grating structure were determined using the reflectance spectrum. The optical field distributions of one- and two-dimensional subwavelength structures were obtained and various subwavelength structures can be fabricated using different rotation methods.

MODERN PHYSICS LETTERS B (2022)

Add to Collection

Article Physics, Multidisciplinary

Plasmonic sensor with self-reference capability based on functional layer film composed of Au/Si gratings

Jiankai Zhu et al.

Summary: We propose a simple one-dimensional grating coupling system for refractive index sensing in the near-infrared band, which exhibits multiple excited surface plasmon resonances and self-reference characteristics. The plasmonic mechanism of the structure is discussed in detail through theoretical analysis and numerical simulations. The experimental results demonstrate that the different resonance modes have different sensitivities and self-reference characteristics.

CHINESE PHYSICS B (2022)

Add to Collection

Article Engineering, Electrical & Electronic

Theoretical study of 2D sub-wavelength structure fabrication via surface plasmon excitation utilizing the enhanced Kretschmann structure combined with sample rotation

Tianxu Jia et al.

Summary: A theoretical method of nanoscale lithography based on the enhanced Kretschmann structure and excitation of surface plasmons is proposed, allowing the fabrication of periodic 2D sub-wavelength structures. The enhanced optical field distribution is determined using the finite element method and related formulas, enabling the simulation of rotation and exposure during lithography. This method offers the advantages of low cost, high resolution, and high efficiency, providing a prospective fabrication method for practical applications of 2D sub-wavelength structures.

OPTICAL AND QUANTUM ELECTRONICS (2022)

Add to Collection

Article Optics

Asymmetric parametric generation of images with nonlinear dielectric metasurfaces

Sergey S. Kruk et al.

Summary: Assembling dissimilar nonlinear dielectric resonators into translucent metasurfaces, the asymmetric parametric generation of light in nonlinear metasurfaces is demonstrated, paving the way for innovative nanophotonic component designs.

NATURE PHOTONICS (2022)

Add to Collection

Article Physics, Multidisciplinary

Refractive index sensing of double Fano resonance excited by nano-cube array coupled with multilayer all-dielectric film

Xiangxian Wang et al.

Summary: We propose a refractive index sensing method based on a hybrid structure of a nano-cube array and multilayer full-dielectric thin films. By optimizing the structural parameters, high quality factors of two Fano resonances are achieved, indicating extensive application prospects in the biological and chemical fields.

CHINESE PHYSICS B (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Incidence Angle Effects on the Fabrication of Microstructures Using Six-Beam Laser Interference Lithography

Tianxu Jia et al.

Summary: This study demonstrates the fabrication of diverse microstructures by controlling the angle of incidence in a six-beam laser interference lithography system, which significantly influences the shape and period of the lattice. The technique is expected to benefit microstructure fabrication due to its simple operation, large writing area, and low cost, promoting the development of micro-optics.

COATINGS (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Ultranarrow Dual-Band Perfect Absorption in Visible and Near-infrared Regimes Based on Three-Dimensional Metamaterials for Ultrahigh-Sensitivity Sensing

Zhendong Yan et al.

Summary: By placing the 3D metamaterial of Au VSRRs directly onto the Au substrate, ultra-narrow dual-band perfect absorption in the visible range for high-sensitivity sensing can be achieved. The proposed 3D metamaterial exhibits ultrahigh sensitivity and figure of merit in the near-infrared regime, holding potential applications in label-free biosensing.

JOURNAL OF LIGHTWAVE TECHNOLOGY (2021)

Add to Collection

Article Engineering, Chemical

An excellent Z-scheme Ag2MoO4/Bi4Ti3O12 heterojunction photocatalyst: Construction strategy and application in environmental purification

Tingting Cheng et al.

Summary: By immobilizing AMO particles onto rod-like BTO hierarchical architectures, a Z-scheme heterojunction photocatalyst was designed, facilitating efficient separation of photoexcited electron-hole pairs and demonstrating superior photodegradation performance compared to bare AMO and BTO.

ADVANCED POWDER TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Multiphoton Upconversion Enhanced by Deep Subwavelength Near-Field Confinement

Jiahui Xu et al.

Summary: Efficient anti-Stokes emission can be achieved within nanometric volumes for compact photonic devices through the integration of lanthanide-activated nanocrystals with gold nanotrenches. Coupling upconversion nanoparticles with subwavelength gap-plasmon modes enhances spontaneous emission rates and boosts upconversion efficiency significantly.

NANO LETTERS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Metasurface-Driven Optically Variable Devices

Chunghwan Jung et al.

Summary: Traditional OVDs face risks in the face of increasing counterfeit threats; Metasurfaces, as candidates for the new generation of OVDs, exhibit multiple optical responses and provide a more robust solution for optical anti-counterfeiting; mOVDs have multiple optical responses, are difficult to reverse engineer, and are key points of discussion in terms of fabrication methods and classification.

CHEMICAL REVIEWS (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Integrated fabrication of micro/nano-fluidic chip based on nano-imprint lithography and bonding

Ran Zhang et al.

Summary: This study proposes a new method for fabricating nanochannels using nanoimprint lithography, with silicon nitride as a bonding layer to achieve efficient bonding between nanochannels and PDMS microchannels. Experimental results show that the fabricated nanochannels have high accuracy and strength, meeting the expected quality of fabrication.

JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Ultraviolet graphene ultranarrow absorption engineered by lattice plasmon resonance

Zhendong Yan et al.

Summary: The study demonstrates an ultraviolet graphene ultranarrow absorption in a hybrid graphene-metal structure, with a full-width at half maximum of 9 nm. By controlling geometrical parameters and materials, the position, absorbance, and linewidth of the hybridized narrow resonant mode can be systematically tuned, showing high refractive index sensitivity and figure of merit, and promising applications in ultra-compact efficient biosensors.

NANOTECHNOLOGY (2021)

Add to Collection

Article Chemistry, Physical

Ultra-wideband and wide-angle perfect solar energy absorber based on Ti nanorings surface plasmon resonance

Fengqi Zhou et al.

Summary: The study introduces an ultra-wideband solar energy absorber composed of Ti ring and SiO2-Si3N4-Ti thin films, with absorption efficiency exceeding 90% and high absorptivity peaks. It maintains absorption efficiency above 90% at various polarization and incidence angles, showing great potential for wide-ranging applications.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Nanoscale Patterning of Zinc Oxide from Zinc Acetate Using Electron Beam Lithography for the Preparation of Hard Lithographic Masks

Ahmad Chaker et al.

Summary: This study demonstrates the nanoscale patterning of zinc oxide using electron beam lithography, achieving 12 nm zinc oxide lines with a 40 nm pitch on silicon. The chemical composition and properties transformation were analyzed using X-ray spectroscopy and electrical resistivity measurements, confirming the successful decomposition of zinc acetate into zinc oxide. The ZnO patterns were then utilized as a hard mask for silicon etching, showing good selectivity for the dry etching process.

ACS APPLIED NANO MATERIALS (2021)

Add to Collection

Article Multidisciplinary Sciences

Single-step manufacturing of hierarchical dielectric metalens in the visible

Gwanho Yoon et al.

NATURE COMMUNICATIONS (2020)

Add to Collection

Article Engineering, Electrical & Electronic

Construction of 2D/0D/2D Face-to-Face Contactg-C3N4@Au@Bi4Ti3O12Heterojunction Photocatalysts for Degradation of Rhodamine B

Huajing Gao et al.

JOURNAL OF ELECTRONIC MATERIALS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Truncated titanium/semiconductor cones for wide-band solar absorbers

Zhengqi Liu et al.

NANOTECHNOLOGY (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Theoretical investigation of subwavelength structure fabrication based on multi-exposure surface plasmon interference lithography

Xiangxian Wang et al.

RESULTS IN PHYSICS (2019)

Add to Collection

Article Physics, Applied

Highly sensitive refractive-index sensor based on strong magnetic resonance in metamaterials

Jing Chen et al.

APPLIED PHYSICS EXPRESS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Theoretical study of a multichannel plasmonic waveguide notch filter with double-sided nanodisk and two slot cavities

Yunping Qi et al.

RESULTS IN PHYSICS (2019)

Add to Collection

Article Chemistry, Physical

Analysis of a Surface Plasmon Resonance Probe Based on Photonic Crystal Fibers for Low Refractive Index Detection

Chao Liu et al.

PLASMONICS (2018)

Add to Collection

Article Physics, Multidisciplinary

Coupling-induced spectral splitting for plasmonic sensing with ultra-high figure of merit

Hua Lu et al.

CHINESE PHYSICS B (2018)

Add to Collection

Article Physics, Multidisciplinary

Refractive index sensor and filter of metal-insulator-metal waveguide based on ring resonator embedded by cross structure

Qi Yun-Ping et al.

ACTA PHYSICA SINICA (2018)

Add to Collection

Article Chemistry, Multidisciplinary

All-Dielectric Dual-Color Pixel with Subwavelength Resolution

Yusuke Nagasaki et al.

NANO LETTERS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Printing Beyond sRGB Color Gamut by Mimicking Silicon Nanostructures in Free-Space

Zhaogang Dong et al.

NANO LETTERS (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Thermal scanning probe lithography for the directed self-assembly of block copolymers

S. Gottlieb et al.

NANOTECHNOLOGY (2017)

Add to Collection

Article Physics, Multidisciplinary

Theoretical study of micro-optical structure fabrication based on sample rotation and two-laser-beam interference

Yizhen Chen et al.

CHINESE PHYSICS B (2017)

Add to Collection

Article Physics, Multidisciplinary

Theoretical investigation of hierarchical sub-wavelength photonic structures fabricated using high-order waveguide-mode interference lithograph

Ru Wang et al.

CHINESE PHYSICS B (2017)

Add to Collection

Review Engineering, Electrical & Electronic

Nanofabrication by electron beam lithography and its applications: A review

Yifang Chen

MICROELECTRONIC ENGINEERING (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Squeezing Bulk Plasmon Polaritons through Hyperbolic Metamaterials for Large Area Deep Subwavelength Interference Lithography

Gaofeng Liang et al.

ADVANCED OPTICAL MATERIALS (2015)

Add to Collection

Article Physics, Applied

Large area sub-wavelength azo-polymer gratings by waveguide modes interference lithography

Xiangxian Wang et al.

APPLIED PHYSICS LETTERS (2013)

Add to Collection

Article Optics

A detailed study of resonance-assisted evanescent interference lithography to create high aspect ratio, super-resolved structures

Prateek Mehrotra et al.

OPTICS EXPRESS (2013)

Add to Collection

News Item Optics

EUV LITHOGRAPHY Lithography gets extreme

Christian Wagner et al.

NATURE PHOTONICS (2010)

Add to Collection

Review Optics

Plasmonics beyond the diffraction limit

Dmitri K. Gramotnev et al.

NATURE PHOTONICS (2010)

Add to Collection

Article Engineering, Electrical & Electronic

Four beams surface plasmon interference nanoscale lithography for patterning of two-dimensional periodic features

K. V. Sreekanth et al.

JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B (2010)

Add to Collection

Article Optics

Localizing surface plasmons with a metal-cladding superlens for projecting deep-subwavelength patterns

T. Xu et al.

APPLIED PHYSICS B-LASERS AND OPTICS (2009)

Add to Collection

Article Materials Science, Multidisciplinary

Plasmon slot waveguides: Towards chip-scale propagation with subwavelength-scale localization

JA Dionne et al.

PHYSICAL REVIEW B (2006)

Add to Collection

Article Physics, Applied

Surface plasmon resonant interference nanolithography technique

XG Luo et al.

APPLIED PHYSICS LETTERS (2004)

Add to Collection

Article Physics, Applied

Free-space coupling of a light beam into a symmetrical metal-cladding optical waveguide

HG Li et al.

APPLIED PHYSICS LETTERS (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.