☆ 4.5 Article

Analysis of heat transfer using Local thermal non-equilibrium conditions for a non-Newtonian fluid flow containing Ti6Al4V and AA7075 nanoparticles in a porous media

ZAMM-ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND MECHANIK (2023)

Related references

Note: Only part of the references are listed.

Article Physics, Multidisciplinary

Investigation of Arrhenius activation energy and convective heat transfer efficiency in radiative hybrid nanofluid flow

M. C. Jayaprakash et al.

Summary: This study investigated the flow and radiative heat transfer of a hybrid nanofluid over a curved stretching sheet. The results showed that the velocity and mass transfer rate of the liquid were affected by suction and injection, and the heat transfer efficiency improved with higher values of the radiation parameter and Biot number.

WAVES IN RANDOM AND COMPLEX MEDIA (2022)

Add to Collection

Article Physics, Multidisciplinary

Effect of NP shapes on Fe3O4 - Ag/kerosene and Fe3O4 - Ag/water hybrid nanofluid flow in suction/injection process with nonlinear-thermal-radiation and slip condition; Hamilton and Crosser's model

D. O. Soumya et al.

Summary: This study examines the flow and thermal properties of Fe3O4 Ag/water and Fe3O4 - Ag/kerosene hybrid nanofluids in a horizontal microchannel. The effects of nonlinear thermal radiation, heat source coefficient, convective and slip boundary conditions on nanofluids in a microchannel have been studied. The impact of different nanoparticle shape factors on the temperature of nanofluids has also been analysed. The results reveal that the spherical and lamina shape factors have the greatest difference for both water and kerosene-based hybrid nanofluids, with water-based nanofluids having higher velocity. The thermal energy of both nanofluids is higher in the lower channel plate, and the flow rate increases towards the upper channel wall. Thermal energy and entropy generation decrease with increasing temperature parameter.

WAVES IN RANDOM AND COMPLEX MEDIA (2022)

Add to Collection

Article Chemistry, Analytical

Activation Energy Impact on Flow of AA7072-AA7075/Water-Based Hybrid Nanofluid through a Cone, Wedge and Plate

Maaliger B. Rekha et al.

Summary: This study investigates the effect of a heat source/sink on the flow of nanofluid through a cone, wedge, and plate. It was found that the heat transfer is improved when the fluid flows past a plate compared to a cone or wedge.

MICROMACHINES (2022)

Add to Collection

Article Physics, Multidisciplinary

Blasius and Sakiadis flow of a Casson hybrid nanofluid over a moving plate

Ebrahem A. Algehyne et al.

Summary: This research investigates the thermophoretic particle deposition on a Casson hybrid nanoliquid flow over a moving plate. The study finds that an increase in the radiation parameter improves fluid heat transfer, while an increase in the thermophoretic coefficient and thermophoretic parameter decreases mass transfer and deposition velocity.

WAVES IN RANDOM AND COMPLEX MEDIA (2022)

Add to Collection

Article Chemistry, Physical

Insight into the investigation of diamond (C) and Silica (SiO2) nanoparticles suspended in water-based hybrid nanofluid with in solar collector

M. M. Bhatti et al.

Summary: This article discusses the behavior of diamond and silica nanoparticles suspended in water-based hybrid nanofluids on an exponentially elastic surface, and analyzes the flow characteristics. Mathematical formulations and numerical methods are used to obtain results related to velocity profiles, skin friction coefficients, temperature profiles, and Nusselt numbers, which are compared and validated against previous studies.

JOURNAL OF MOLECULAR LIQUIDS (2022)

Add to Collection

Article Thermodynamics

Numerical simulation of local thermal non-equilibrium effects on the flow and heat transfer of non-Newtonian Casson fluid in a porous media

A. Alhadhrami et al.

Summary: This study investigates the Soret and Dufour effects on non-Newtonian Casson liquid flow under local thermal non-equilibrium conditions, considering Stefan blowing and magnetic effects. The results show that an increase in magnetic and porosity parameters decreases velocity but improves heat transfer.

CASE STUDIES IN THERMAL ENGINEERING (2021)

Add to Collection

Article Engineering, Mechanical

Impact of Stefan blowing and magnetic dipole on bio-convective flow of Maxwell nanofluid over a stretching sheet

A. Alhadhrami et al.

Summary: This study investigates the relationship between thermal distribution, magnetic field, and fluid flow of Maxwell liquid over a stretching sheet, and finds that Newtonian liquid exhibits higher heat transfer compared to non-Newtonian liquid under increased Brownian motion and thermophoresis parameters. Additionally, an increase in Peclet number decreases the rate of gyrotactic microorganisms, while an increase in Brownian and thermophoresis motion parameters reduces the rate of heat transfer.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING (2021)

Add to Collection

Article Chemistry, Physical

Impact of magnetic dipole on thermophoretic particle deposition in the flow of Maxwell fluid over a stretching sheet

R. Naveen Kumar et al.

Summary: The impact of thermophoretic particle deposition and magnetic dipole in the flow of Maxwell liquid over a stretching sheet is explored in this analysis. The modelling equations are transformed into a system of ordinary differential equations, which are then numerically solved using the Runge Kutta Fehlberg 45 process with shooting technique. The study discusses the effects of relevant parameters on flow fields, heat and mass transfer, and various other parameters using graphical representations.

JOURNAL OF MOLECULAR LIQUIDS (2021)

Add to Collection

Article Engineering, Chemical

Impact of Binary Chemical Reaction and Activation Energy on Heat and Mass Transfer of Marangoni Driven Boundary Layer Flow of a Non-Newtonian Nanofluid

Ramanahalli Jayadevamurthy Punith Gowda et al.

Summary: Studied the steady Marangoni driven boundary layer flow, heat and mass transfer characteristics of a nanofluid, results showed that increasing Marangoni number improves velocity gradient and reduces heat transfer, while increasing porosity parameter reduces velocity gradient and improves heat transfer, Nusselt number decreases as porosity parameter increases.

PROCESSES (2021)

Add to Collection

Article Physics, Multidisciplinary

Dual solutions for Casson hybrid nanofluid flow due to a stretching/shrinking sheet: A new combination of theoretical and experimental models

Seyed Mahdi Mousavi et al.

Summary: This study investigates the two-dimensional MHD Casson flow past a linearly stretching/shrinking sheet with suction, radiation, and convective boundary condition effects by employing experimental relations to approximate the effective thermophysical properties of a water/MgO-Ag hybrid nanofluid. It also considers dual solutions and stability analysis, demonstrating the importance of selective experimental relations in future numerical modeling of hybrid nanofluids. Results show an enhancement of the Casson fluid parameter range with increasing radiation parameter, suction parameter, and second nanoparticle mass, as well as the acceleration of similarity velocity profiles in the hydrodynamic boundary layer due to a magnetic field applied normal to the sheet.

CHINESE JOURNAL OF PHYSICS (2021)

Add to Collection

Article Mechanics

Effect of micromagnetorotation on magnetohydrodynamic Poiseuille micropolar flow: analytical solutions and stability analysis

Kyriaki-Evangelia Aslani et al.

Summary: The study investigates the effect of micromagnetorotation (MMR) on micropolar flows, revealing a strong braking effect on velocity and microrotation. The modified Orr-Sommerfeld equation that incorporates MMR is introduced to study the stability of the flow, showing a strong stabilizing effect of MMR on the micropolar flow.

JOURNAL OF FLUID MECHANICS (2021)

Add to Collection

Article Chemistry, Physical

Exploring magnetic dipole contribution on ferromagnetic nanofluid flow over a stretching sheet: An application of Stefan blowing

R. J. Punith Gowda et al.

Summary: The study investigates the flow of a two-dimensional ferromagnetic fluid over a flat elastic sheet with considerations for the magnetic dipole effect, Brownian motion, and thermophoresis effects. Both Stefan blowing effect and convective boundary constraint significantly impact heat transfer, with numerical results demonstrating high thermal gradient and heat transfer efficiency under these conditions.

JOURNAL OF MOLECULAR LIQUIDS (2021)

Add to Collection

Article Physics, Applied

Comparative analysis of (Zinc ferrite, Nickel Zinc ferrite) hybrid nanofluids slip flow with entropy generation

P-Y Xiong et al.

Summary: This study analyzes the flow of hybrid nanofluid over a sheet, investigating parameters such as velocity, thermal gradients, and entropy generation. Results show that certain hybrid nanofluids exhibit lower velocity and higher entropy generation. Increasing the heat generation parameter can enhance the rate of heat transfer.

MODERN PHYSICS LETTERS B (2021)

Add to Collection

Article Physics, Fluids & Plasmas

Effect of Magnetohydrodynamics on Heat Transfer Behaviour of a Non-Newtonian Fluid Flow over a Stretching Sheet under Local Thermal Non-Equilibrium Condition

Konduru Sarada et al.

Summary: A mathematical model is proposed to describe the flow, heat, and mass transfer behaviour of a non-Newtonian fluid over a stretching sheet, and a similarity solution is given for steady two-dimensional flow subjected to Buongiorno's theory. The results show that different parameters have significant effects on the fluid velocity and heat transfer rate in the study of magnetohydrodynamics in a porous medium.

FLUIDS (2021)

Add to Collection

Article Thermodynamics

A printed-circuit heat exchanger consideration by exploiting an Al2O3-water nanofluid: Effect of the nanoparticles interfacial layer on heat transfer

Apostolos A. Gkountas et al.

Summary: This study investigates the use of Al2O3-water nanofluid in a printed-circuit heat exchanger (PCHE) as a precooler for S-CO2 Brayton cycles. The findings show that a maximum nanoparticle volume fraction of 5% results in a 75% improvement in heat transfer coefficient, a 1% reduction in heat exchanger length, and an 8% increase in pressure drop. Additionally, an increase in nanoparticle radius reduces effective thermal conductivity, while a nanolayer thickness of 2 nm improves heat transfer coefficient by 43% compared to 0.5 nm.

THERMAL SCIENCE AND ENGINEERING PROGRESS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Hydromagnetic flow of ferrofluid in an enclosed partially heated trapezoidal cavity filled with a porous medium

Z. H. Khan et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Thermophoretic MHD free stream flow with variable internal heat generation/absorption and variable liquid characteristics in a permeable medium over a radiative exponentially stretching sheet

M. Irfan et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

Add to Collection

Article Engineering, Multidisciplinary

Effect of radiation on engine oil-TC4/NiCr mixture nanofluid flow over a revolving cone in mutable permeable medium

Iskander Tlili et al.

AIN SHAMS ENGINEERING JOURNAL (2020)

Add to Collection

Article Mathematics

INFLUENCE OF THERMAL DIFFUSION ON MHD RADIATING FLOW IN PRESENCE OF Cu-NANOPARTICLES, CASSON FLUID AND ANGLE OF INCLINATION

S. Brahma Chary et al.

JOURNAL OF APPLIED MATHEMATICS AND COMPUTATIONAL MECHANICS (2020)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Development of a new theoretical model for blood-CNTs effective thermal conductivity pertaining to hyperthermia therapy of glioblastoma multiform

L. Benos et al.

COMPUTER METHODS AND PROGRAMS IN BIOMEDICINE (2019)

Add to Collection

Article Physics, Multidisciplinary

Magnetohydrodynamic Free Stream and Heat Transfer of Nanofluid Flow Over an Exponentially Radiating Stretching Sheet With Variable Fluid Properties

Muhammad Irfan et al.

FRONTIERS IN PHYSICS (2019)

Add to Collection

Article Thermodynamics

Analytical solutions of fluid flow and heat transfer in a partial porous channel with stress jump and continuity interface conditions using LTNE model

Qi Li et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

Add to Collection

Article Engineering, Chemical

Nonlinear Thermal Radiation and Chemical Reaction Effects on a (Cu-CuO)/NaAlg Hybrid Nanofluid Flow Past a Stretching Curved Surface

Naveed Ahmed et al.

PROCESSES (2019)

Add to Collection

Article Mathematics, Applied

Unsteady MHD Non-Darcian Flow Over a Vertical Stretching Plate Embedded in a Porous Medium with Thermal Non-Equilibrium Model

D. Prakash et al.

ADVANCES IN APPLIED MATHEMATICS AND MECHANICS (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Mixed convection flow of MHD Eyring-Powell nanofluid over a stretching sheet: A numerical study

M. Y. Malik et al.

AIP ADVANCES (2015)

Add to Collection

Article Mathematics, Applied

Unsteady convective boundary layer flow of a viscous fluid at a vertical surface with variable fluid properties

K. Vajravelu et al.

NONLINEAR ANALYSIS-REAL WORLD APPLICATIONS (2013)

Add to Collection

Article Thermodynamics

Effects of radiation and magnetic field on the mixed convection stagnation-point flow over a vertical stretching sheet in a porous medium

T. Hayat et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2010)

Add to Collection

Article Thermodynamics

On the limits of validity of the low magnetic Reynolds number approximation in MHD natural-convection heat transfer

I. E. Sarris et al.

NUMERICAL HEAT TRANSFER PART B-FUNDAMENTALS (2006)

Add to Collection

Article Thermodynamics

MHD natural convection in a laterally and volumetrically heated square cavity

IE Sarris et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2005)

Add to Collection

Article Engineering, Industrial

Effect of the thermomechanical treatment on the structure of titanium alloy Ti6Al4V

M Zitnansky et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.