Related references
Note: Only part of the references are listed.Fully coupled thermo-mechanical finite element modeling of friction stir processing of super duplex stainless steel
Md Eyasin Arafat et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)
Degradation of nickel-bonded tungsten carbide tools in friction stir welding of high carbon steel
Buchibabu Vicharapu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)
Rapid precipitation of intermetallic phases during isothermal treatment of duplex stainless steel joints produced by friction stir welding
Igor J. Marques et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Microstructure and mechanical properties of friction stir welded 8 mm pipe SAF 2507 super duplex stainless steel
Rafael Arthur Reghine Giorjao et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)
Effect of friction stir welding tool design on welding thermal efficiency
Hongjun Li et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2019)
Microstructure and Fracture Behavior of Refill Friction Stir Spot Welded Joints of AA2024 Using a Novel Refill Technique
Lipeng Deng et al.
METALS (2019)
Effect of high anodic polarization on the passive layer properties of superduplex stainless steel friction stir welds at different chloride electrolyte pH values and temperatures
L. A. Santa-Cruz et al.
INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2019)
Estimation of the Temperature in the Stirred Zone and Cooling Rate of Friction Stir Welding of EH46 Steel from TiN Precipitates
Montadhar Al-moussawi et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2019)
Effect of friction stir welding parameters on the microstructure and microtexture evolution of SAF 2205 stainless steel
S. Emami et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Corrosion Evaluation of Duplex and Superduplex Stainless Steel Friction Stir Welds Using Potentiodynamic Measurements and Immersion Tests in Chloride Environments
Larissa A. Santa Cruz et al.
METALLOGRAPHY MICROSTRUCTURE AND ANALYSIS (2019)
Evaluation of Abrasive Wear in UNS S32101 and S32750 Duplex Stainless Steels Submitted to Friction Stir Processing
Igor Jordao Marques et al.
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS (2019)
Recent progress in friction stir welding tools used for steels
Lei Cui et al.
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2018)
Effect of the Heat Treatment on the Corrosion Resistance of Duplex Stainless Steels
Luca Pezzato et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2018)
A review of friction stir welding of steels: Tool, material flow, microstructure, and properties
F. C. Liu et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2018)
Influence of small amount and different morphology of secondary phases on impact toughness of UNS S32205 Duplex Stainless
Claudio Gennari et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
A numerical model of pin thread effect on material flow and heat generation in shear layer during friction stir welding
Z. Sun et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
Temperature measurements during friction stir welding
A. C. F. Silva et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Three-dimensional numerical modeling of the friction stir welding of dissimilar steels
C. A. Hernandez et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Effect of welding processes and conditions on the microstructure, mechanical properties and corrosion resistance of duplex stainless steel weldments-A review
Jagesvar Verma et al.
JOURNAL OF MANUFACTURING PROCESSES (2017)
Transient model of heat transfer and material flow at different stages of friction stir welding process
L. Shi et al.
JOURNAL OF MANUFACTURING PROCESSES (2017)
Pitting corrosion susceptibility of friction stir welded lean duplex stainless steel joints
M. Atapour et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Detailed Microstructural Characterization and Restoration Mechanisms of Duplex and Superduplex Stainless Steel Friction-Stir-Welded Joints
T. F. A. Santos et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2016)
Identification of sigma and chi phases in duplex stainless steels
Nuria Llorca-Isern et al.
MATERIALS CHARACTERIZATION (2016)
Friction stir welding of duplex and superduplex stainless steels and some aspects of microstructural characterization and mechanical performance
Tiago Felipe de Abreu Santos et al.
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS (2016)
Physical Simulation of a Duplex Stainless Steel Friction Stir Welding by the Numerical and Experimental Analysis of Hot Torsion Tests
Eduardo Bertoni da Fonseca et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2016)
Super and hyper duplex stainless steels: structures, properties and applications
Guocai Chail et al.
21ST EUROPEAN CONFERENCE ON FRACTURE, (ECF21) (2016)
Corrosion behavior of friction stir welded lean duplex stainless steel
H. Sarlak et al.
MATERIALS & DESIGN (2015)
Cooling rates and peak temperatures during friction stir welding of a high-carbon steel
V. Manvatkar et al.
SCRIPTA MATERIALIA (2015)
Friction stir welding of mild steel: tool durability and steel microstructure
A. De et al.
MATERIALS SCIENCE AND TECHNOLOGY (2014)
Thermal history in UNS S32205 duplex stainless steel friction stir welds
T. F. A. Santos et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2014)
Use of stainless steels in the industry: recent and future developments
Pauline Boillot et al.
SYMPHOS 2013 - 2ND INTERNATIONAL SYMPOSIUM ON INNOVATION AND TECHNOLOGY IN THE PHOSPHATE INDUSTRY (2014)
Three-dimensional numerical and experimental investigation on friction stir welding processes of ferritic stainless steel
Hoon-Hwe Cho et al.
ACTA MATERIALIA (2013)
Microstructure and mechanical properties of friction stir welded lean duplex stainless steel
M. Esmailzadeh et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Microstructure evaluation of UNS S32205 duplex stainless steel friction stir welds
Tiago F. A. Santos et al.
REM-REVISTA ESCOLA DE MINAS (2013)
Review of tools for friction stir welding and processing
Y. N. Zhang et al.
CANADIAN METALLURGICAL QUARTERLY (2012)
Microstructure and Toughness of Friction Stir Weld of Thick Structural Steel
Muneo Matsushita et al.
ISIJ INTERNATIONAL (2012)
Friction stir welded structural materials: beyond Al-alloys
G. Çam
INTERNATIONAL MATERIALS REVIEWS (2011)
Hot working behavior of 2205 austenite-ferrite duplex stainless steel characterized by constitutive equations and processing maps
A. Momeni et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Review: friction stir welding tools
R. Rai et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2011)
Hot deformation characteristics of 2205 duplex stainless steel based on the behavior of constituent phases
H. Farnoush et al.
MATERIALS & DESIGN (2010)
Chi-phase precipitation in a duplex stainless steel
D. M. Escriba et al.
MATERIALS CHARACTERIZATION (2009)
Recent developments in stainless steels
K. H. Lo et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2009)
Boride Formation Induced by pcBN Tool Wear in Friction-Stir-Welded Stainless Steels
Seung Hwan C. Park et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2009)
Critical assessment: friction stir welding of steels
H. K. D. H. Bhadeshia et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2009)
Phase transformation and mechanical behavior in annealed 2205 duplex stainless steel welds
Riad Badji et al.
MATERIALS CHARACTERIZATION (2008)
Effect of friction stir welding speed on the microstructure and mechanical properties of a duplex stainless steel
T. Saeid et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Recent advances in friction-stir welding - Process, weldment structure and properties
R. Nandan et al.
PROGRESS IN MATERIALS SCIENCE (2008)
Duplex stainless steels, a review after DSS'07 held in Grado
J. Charles
REVUE DE METALLURGIE-CAHIERS D INFORMATIONS TECHNIQUES (2008)
Thermal modelling of friction stir welding
H. B. Schmidt et al.
SCRIPTA MATERIALIA (2008)
Three-dimensional heat and material flow during friction stir welding of mild steel
R. Nandan et al.
ACTA MATERIALIA (2007)
Qualitative and quantitative analysis of σ and χ phases in 2205 duplex stainless steel
Joanna Michalska et al.
MATERIALS CHARACTERIZATION (2006)
3-Dimensional CFD modelling of flow round a threaded friction stir welding tool profile
PA Colegrove et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2005)
Numerical simulation of transient temperature and residual stresses in friction stir welding of 304L stainless steel
XK Zhu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)
Grain boundary self-diffusion in α-iron of different purity:: effect of dislocation enhanced diffusion
SV Divinski et al.
ZEITSCHRIFT FUR METALLKUNDE (2004)
An analytical model for the heat generation in friction stir welding
H Schmidt et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2004)
Rapid formation of the sigma phase in 304 stainless steel during friction stir welding
SHC Park et al.
SCRIPTA MATERIALIA (2003)
Share Paper
