☆ 4.7 Article

Room and elevated temperature sliding wear of high velocity oxy-fuel sprayed Diamalloy3001 coatings

TRIBOLOGY INTERNATIONAL (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Microstructure and mechanical properties of Tribaloy coatings deposited by high-velocity oxygen fuel

S. A. Alidokht et al.

Summary: In this study, two Co-based Tribaloy powders were coated on mild steel substrate using high-velocity oxygen fuel (HVOF) spraying. The microstructure and distribution of Laves phases in the coatings were investigated. It was found that Co3Mo2Si and Co3Mo were the main constituents of the intermetallic Laves phases in the sprayed coatings. The volume fraction of Laves phases in the coatings was significantly lower compared to similar alloys due to high cooling rate and solidification in HVOF. The Laves-free solid solution exhibited a nano-crystalline microstructure with similar local hardness to the Laves phases.

JOURNAL OF MATERIALS SCIENCE (2022)

Add to Collection

Review Materials Science, Multidisciplinary

Laves phases: a review of their functional and structural applications and an improved fundamental understanding of stability and properties

Frank Stein et al.

Summary: Laves phases, with their simple crystal structure, are common intermetallic phases formed by various element combinations, offering a wide range of potential applications. This review summarizes the knowledge on Laves phases and explores their roles in different functional and structural materials, providing insights for further research and application.

JOURNAL OF MATERIALS SCIENCE (2021)

Add to Collection

Article Engineering, Mechanical

Sliding wear behavior of cold-sprayed Ni-WC composite coatings: Influence OF WC content

Sima A. Alidokht et al.

Summary: Metal matrix composites reinforced with WC particles and Co or Ni matrices are known for their unique combination of hardness, toughness, and superior wear performance. This study focused on Ni-WCNi composite coatings and found that coatings with higher WC fill ratios displayed better wear resistance due to the uniform distribution of WC particles and shorter mean free path reducing adhesive wear. However, at higher loads, subsurface crack propagation at WC particle interfaces led to a reduction in the protective role of mechanically mixed layers. Scratch tests were used to qualitatively compare coating cohesion strengths and correlate them to wear properties.

WEAR (2021)

Add to Collection

Article Materials Science, Coatings & Films

The role of metal powder properties on the tribology of cold sprayed Ti6Al4V-TiC metal matrix composites

Venkata Naga Vamsi Munagala et al.

Summary: Ti6Al4V-TiC metal matrix composite (MMC) coatings were cold sprayed using spherical and irregular Ti6Al4V powders with plasma gas atomization and the Armstrong process, respectively. Composite coatings deposited using irregular powders exhibit higher ceramic retentions and lower porosity compared to those made with spherical powder. In wear tests, irregular powder composites showed resistance to abrasive wear mechanisms with lower coefficients of friction and wear rates due to the presence of islands of tribolayers, while increasing ceramic content led to even lower wear rates and continuous tribolayer formation at higher loads. The formation of tribolayers resulted in coarser-grain microstructures in the worn subsurface, indicating less stress transfer and lower wear rates.

SURFACE & COATINGS TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Physical

The Tribaloy T-800 Coatings Deposited by Laser Engineered Net Shaping (LENS™)

Tomasz Durejko et al.

MATERIALS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Tribologically induced nanolaminate in a cold-sprayed WC-reinforced Cu matrix composite: a key to high wear resistance

Yinyin Zhang et al.

MATERIALS & DESIGN (2019)

Add to Collection

Review Materials Science, Multidisciplinary

Nanomechanical testing of third bodies

Richard R. Chromik et al.

CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2018)

Add to Collection

Article Engineering, Mechanical

High-temperature sliding wear behaviour of Stellite (R) 12 and Tribaloy (R) T400

Alexander Renz et al.

WEAR (2018)

Add to Collection

Article Materials Science, Multidisciplinary

The Effects of Heat Treatment on Microstructure and Mechanical Properties of Tribaloy 400 Coatings Deposited by Laser Cladding

Junbo Lin et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2018)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

HVOF Sprayed WC Based Cermet Coating for Mitigation of Cavitation, Erosion & Abrasion in Hydro Turbine Blade

Hemant Kumar et al.

MATERIALS TODAY-PROCEEDINGS (2018)

Add to Collection

Article Engineering, Chemical

Role of Third Bodies in Friction and Wear of Cold-Sprayed Ti and Ti-TiC Composite Coatings

Sima A. Alidokht et al.

TRIBOLOGY LETTERS (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Surface oxidation of Ni20Cr/Cr3O2 composite processed by ball milling and HVOF thermal spraying

Israel Lopez-Baez et al.

VACUUM (2017)

Add to Collection

Article Engineering, Mechanical

Brittle to ductile transition of tribomaterial in relation to wear response at high temperatures

Ariane Viat et al.

WEAR (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Sequence of Stages in the Microstructure Evolution in Copper under Mild Reciprocating Tribological Loading

Christian Greiner et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Add to Collection

Article Engineering, Chemical

Third Body Behavior During Dry Sliding of Cold-Sprayed Al-Al2O3 Composites: In Situ Tribometry and Microanalysis

J. Michael Shockley et al.

TRIBOLOGY LETTERS (2014)

Add to Collection

Article Materials Science, Coatings & Films

Characteristics of Tribaloy T-800 and T-900 coatings on steel substrates by laser cladding

M. J. Tobar et al.

SURFACE & COATINGS TECHNOLOGY (2008)

Add to Collection

Article Engineering, Mechanical

Wear mecahnisms and wear rate in a high temperature dry friction of AISI H11 tool steel: Influence of debris circulation

O. Barrau et al.

WEAR (2007)

Add to Collection

Article Engineering, Mechanical

Microstructural and tribological comparison of HVOF-sprayed and post-treated M-Mo-Cr-Si (M = Co, Ni) alloy coatings

Giovanni Bolelli et al.

WEAR (2007)

Add to Collection

Article Engineering, Mechanical

Microstructure of tribologically induced nanolayers produced at ultra-low wear rates

D. Shakhvorostov et al.

WEAR (2007)

Add to Collection

Article Engineering, Chemical

Tribological properties of HVOF as-sprayed and heat treated Co-Mo-Cr-Si coatings

G. Bolelli et al.

TRIBOLOGY LETTERS (2007)

Add to Collection

Article Materials Science, Coatings & Films

Heat treatment effects on the tribological performance of HVOF sprayed Co-Mo-Cr-Si coatings

G. Bolelli et al.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2006)

Add to Collection

Article Nanoscience & Nanotechnology

High temperature wear and corrosion resistance of a Laves phase strengthened Co-Mo-Cr-Si alloy

M. X. Yao et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)

Add to Collection

Article Engineering, Mechanical

Microstructure and sliding wear behaviour of Tribaloy T-800 coatings deposited by laser cladding

C Navas et al.

WEAR (2006)

Add to Collection

Review Engineering, Ocean

State of the art of HVOF coating investigations - A review

TS Sidhu et al.

MARINE TECHNOLOGY SOCIETY JOURNAL (2005)

Add to Collection

Article Engineering, Mechanical

Correlation between the characteristics of the mechanically mixed layer and wear behaviour of aluminium, Al-7075 alloy and Al-MMCs

B Venkataraman et al.

WEAR (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.