☆ 4.7 Article

Dynamic modeling and properties analysis for ball bearing driven by structure flexible deformations

TRIBOLOGY INTERNATIONAL (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Mechanical

A comprehensive study on dynamic performance of ball bearing considering bearing deformations and ball-inner raceway separation

Mingkai Wang et al.

Summary: This paper proposes an improved nonlinear dynamic model of ball bearing considering bearing deformations and ball-inner raceway separation, and verifies it through experiments. The study finds that bearing deformations affect the contact properties, and appropriate preload improves the bearing service characteristics.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2023)

Add to Collection

Article Engineering, Mechanical

Skidding and cage whirling of angular contact ball bearings: Kinematic-hertzian contact-thermal-elasto-hydrodynamic model with thermal expansion and experimental validation

Shuai Gao et al.

Summary: This paper presents a KH-TEHD model to address the damage problems introduced by skidding behavior and validates its accuracy and effectiveness through experimental studies. The results show that the degree of overskidding is approximately proportional to the square of the bearing size, and the maximum thermal deformation at the bearing raceway under starvation lubrication reaches 4 times the ball-raceway clearance.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

Add to Collection

Article Engineering, Mechanical

Experimental and theoretical approaches for determining cage motion dynamic characteristics of angular contact ball bearings considering whirling and overall skidding behaviors

Shuai Gao et al.

Summary: This study proposed a comprehensive bearing dynamic model focused on cage characteristics and introduced several indicators describing cage stability and skidding degree based on experimental and theoretical results. It identified factors affecting bearing skidding and instability of the cage.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

Add to Collection

Article Engineering, Mechanical

Dynamic interaction between the rolling element and cage of rolling bearing considering cage flexibility and clearance

Dingtang Zhao et al.

Summary: The study analyzes the dynamic interaction between the rolling element and cage, proposes a dynamic model, and evaluates and discusses the impacts under different circumstances.

MECHANISM AND MACHINE THEORY (2022)

Add to Collection

Article Engineering, Mechanical

Nonlinear dynamic mechanisms of angular contact ball bearings with waviness and cage whirl motion

Song Deng et al.

Summary: This paper proposes a nonlinear dynamic model for studying angular contact ball bearings with waviness and cage whirl motion. The interactions between balls, cage, and bearing rings are investigated, and the impact of waviness on the dynamic behavior of the system is analyzed. The study shows that sparse waviness with tiny amplitude can improve the stability of the bearing system.

NONLINEAR DYNAMICS (2022)

Add to Collection

Article Engineering, Mechanical

Dynamic and wear characteristics of self-lubricating bearing cage: effects of cage pocket shape

Shuai Gao et al.

Summary: This study proposes a comprehensive dynamic model for analyzing the stability, skidding degree, ball-cage collision, wear distribution, and wear rate of four types of cage pocket. Experimental results show that the cage with a combination of circle and rectangle pockets has the highest stability, while the circle pocket has a larger collision area but a higher wear rate. The combined rectangle-diamond pocket has better wear resistance.

NONLINEAR DYNAMICS (2022)

Add to Collection

Article Engineering, Mechanical

Real-Time Dynamics Modeling of Cryogenic Ball Bearings With Thermal Coupling

Pradeep K. Gupta et al.

Summary: The study presents real-time dynamic modeling of cryogenic ball bearings with consideration of thermal coupling, based on experimentally measured traction behavior. The research demonstrates that under stable conditions, the temperature field of the bearing can approach the operating value, indicating the effectiveness of dynamic simulation with thermal interactions.

JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2021)

Add to Collection

Article Engineering, Mechanical

Influence of angular misalignment on the tribological performance of high-speed micro ball bearings considering full multibody interactions

Chengwei Wen et al.

Summary: The study shows that angular misalignment has significant effects on the performance and fatigue life of high-speed micro ball bearings under different load conditions, with different impacts under pure axial load and combined axial and radial loads. An increase in the absolute value of angular misalignment leads to an increase in total power loss and a significant decrease in fatigue life. The direction of angular misalignment is a key factor determining the effects under combined axial and radial loads.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2021)

Add to Collection

Article Engineering, Mechanical

Skidding dynamic performance of rolling bearing with cage flexibility under accelerating conditions

Yuqing Liu et al.

Summary: Rolling bearings are widely used in rotating machinery and their dynamic performance affects the stability, reliability, and safety of the machine. Research shows that rolling element skidding generally occurs when the rolling element enters or leaves the loaded region. Decreasing the radial load or increasing the angular acceleration of the inner ring are primary causes of bearing skidding, while increasing the connection stiffness can effectively alleviate skidding.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)

Add to Collection

Article Engineering, Mechanical

Dynamic behaviors of angular contact ball bearing with a localized surface defect considering the influence of cage and oil lubrication

Chengwei Wen et al.

Summary: This paper proposes a complete multi-degree-of-freedom dynamic model for defective angular contact ball bearing, analyzing the effects of outer raceway defects with different sizes and position angles on the dynamic behaviors of the bearing under high-speed conditions. Results show that the defect significantly influences the load characteristics and the angular misalignments, with an abrupt change in the traction in the ball-raceway contact around the defect exit event.

MECHANISM AND MACHINE THEORY (2021)

Add to Collection

Article Engineering, Mechanical

Nonlinear Dynamic Behavior of Angular Contact Ball Bearings under Microgravity and Gravity

Yuanqing Liu et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)

Add to Collection

Article Engineering, Mechanical

Experimental observations and dynamic modeling of vibration, characteristics of a cylindrical roller bearing with roller defects

Linkai Niu et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2020)

Add to Collection

Article Engineering, Mechanical

The effect of lubricant temperature on dynamic behavior in angular contact ball bearings

Yuanqing Liu et al.

MECHANISM AND MACHINE THEORY (2020)

Add to Collection

Article Engineering, Mechanical

Effect of the ring misalignment on the service characteristics of ball bearing and rotor system

Yanfei Zhang et al.

MECHANISM AND MACHINE THEORY (2020)

Add to Collection

Article Engineering, Mechanical

Experimental study on dynamic behavior of ball bearing cage in cryogenic environments, Part II: Effects of cage mass imbalance

Bokseong Choe et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

Add to Collection

Article Engineering, Mechanical

Experimental study on dynamic behavior of ball bearing cage in cryogenic environments, Part I: Effects of cage guidance and pocket clearances

Bokseong Choe et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

Add to Collection

Article Engineering, Mechanical

An analytical calculation method of the load distribution and stiffness of an angular contact ball bearing

Jing Liu et al.

MECHANISM AND MACHINE THEORY (2019)

Add to Collection

Article Automation & Control Systems

Research on the axial stiffness softening and hardening characteristics of machine tool spindle system

Jiandong Li et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)

Add to Collection

Article Engineering, Mechanical

Influence of Lubricant Traction Coefficient on Cage's Nonlinear Dynamic Behavior in High-Speed Cylindrical Roller Bearing

Wenhu Zhang et al.

JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2017)

Add to Collection

Article Engineering, Mechanical

New computational method of the ball/race contacts transverse loads of high speed ball bearings without race control hypothesis

C. Servais et al.

TRIBOLOGY INTERNATIONAL (2017)

Add to Collection

Article Engineering, Mechanical

Influence of cage clearance on the heating characteristics of high-speed ball bearings

Zhaohui Yang et al.

TRIBOLOGY INTERNATIONAL (2017)

Add to Collection

Article Thermodynamics

Thermal-deformation coupling in thermal network for transient analysis of spindle-bearing system

Ke Yan et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2016)

Add to Collection

Article Engineering, Mechanical

A comprehensive dynamic model to investigate the stability problems of the rotor-bearing system due to multiple excitations

Xuening Zhang et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2016)

Add to Collection

Article Engineering, Mechanical

Non-Gaussian surface parameters effects on Micro-TEHL performance and surface stress of aero-engine main-shaft ball bearing

Xiu-Jiang Shi et al.

TRIBOLOGY INTERNATIONAL (2016)

Add to Collection

Article Engineering, Mechanical

An investigation on the occurrence of stable cage whirl motions in ball bearings based on dynamic simulations

Linkai Niu et al.

TRIBOLOGY INTERNATIONAL (2016)

Add to Collection

Article Mathematics, Applied

A new nonlinear dynamic model of the rotor-bearing system considering preload and varying contact angle of the bearing

Xuening Zhang et al.

COMMUNICATIONS IN NONLINEAR SCIENCE AND NUMERICAL SIMULATION (2015)

Add to Collection

Article Engineering, Mechanical

Traction coefficients for some solid lubricants for rolling bearing dynamics modeling

PK Gupta

TRIBOLOGY TRANSACTIONS (2000)

Add to Collection

Article Engineering, Mechanical

Calculation of the stiffness matrix of angular contact ball bearings by using the analytical approach

X Hernot et al.

JOURNAL OF MECHANICAL DESIGN (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.